[Bugme-new] [Bug 6679] New: kernel hangs on boot with acpi=on and
usb magneto-optical drive
bugme-daemon at bugzilla.kernel.org
bugme-daemon at bugzilla.kernel.org
Sun Jun 11 13:56:32 PDT 2006
http://bugzilla.kernel.org/show_bug.cgi?id=6679
Summary: kernel hangs on boot with acpi=on and usb magneto-
optical drive
Kernel Version: 2.6.16.13-4-smp, 2.6.16.20-smp
Status: NEW
Severity: normal
Owner: acpi_other at kernel-bugs.osdl.org
Submitter: peter.schlaf at web.de
The device is an usb magneto-optical drive called "FUJITSU DynaMO 2300 U2".
Mainboard is ASUS P4P800 Deluxe with Pentium4 2.8GHz.
The problem:
When this drive is on and connected to an usb-port before pc power-on, the
system (2.6.16.13-4-smp from SuSE 10.1) freezes immediately after the linux
kernel was selected from grub boot menu (no output on screen at all and no
change of num-led by hitting num-key). It's 100% reproducible.
If booting is done with "acpi=off" there is no freeze and everything is fine.
Bad sideeffect: usual two cpu instances are visible in /proc/cpuinfo when
hyperthreading is enabled. With "acpi=off" only one cpu is visible.
Upgrading to kernel 2.6.16.20-smp or using boot-option "nosmp" or "acpi=noirq"
instead of "acpi=off" didn't solve the problem.
When this drive gets connected to an usb-port after booting, the kernel detects
the device and it is usable without any problem:
/var/log/messages:
Jun 10 21:32:09 linux99 kernel: usb 1-5: new high speed USB device using
ehci_hcd and address 2
Jun 10 21:32:09 linux99 kernel: usb 1-5: new device found, idVendor=04c5,
idProduct=101e
Jun 10 21:32:09 linux99 kernel: usb 1-5: new device strings: Mfr=73, Product=82,
SerialNumber=109
Jun 10 21:32:09 linux99 kernel: usb 1-5: Product: USB Magneto-Optical Device
Jun 10 21:32:09 linux99 kernel: usb 1-5: Manufacturer: FUJITSU
Jun 10 21:32:09 linux99 kernel: usb 1-5: SerialNumber: 0047015070251000
Jun 10 21:32:09 linux99 kernel: usb 1-5: configuration #2 chosen from 1 choice
Jun 10 21:32:09 linux99 kernel: Initializing USB Mass Storage driver...
Jun 10 21:32:09 linux99 kernel: scsi2 : SCSI emulation for USB Mass Storage devices
Jun 10 21:32:09 linux99 kernel: usb-storage: device found at 2
Jun 10 21:32:09 linux99 kernel: usb-storage: waiting for device to settle before
scanning
Jun 10 21:32:09 linux99 kernel: usbcore: registered new driver usb-storage
Jun 10 21:32:09 linux99 kernel: USB Mass Storage support registered.
Jun 10 21:32:14 linux99 kernel: Vendor: FUJITSU Model: MCJ3230UB-S
Rev: 0030
Jun 10 21:32:14 linux99 kernel: Type: Direct-Access
ANSI SCSI revision: 04
Jun 10 21:32:14 linux99 kernel: sd 2:0:0:0: Attached scsi removable disk sdc
Jun 10 21:32:14 linux99 kernel: sd 2:0:0:0: Attached scsi generic sg2 type 0
Jun 10 21:32:14 linux99 kernel: usb-storage: device scan complete
------- You are receiving this mail because: -------
You are on the CC list for the bug, or are watching someone who is.
More information about the Bugme-new
mailing list