[Bugme-new] [Bug 6725] New: "power bug" in 2.6.17 PCMCIA support
bugme-daemon at bugzilla.kernel.org
bugme-daemon at bugzilla.kernel.org
Tue Jun 20 12:52:04 PDT 2006
http://bugzilla.kernel.org/show_bug.cgi?id=6725
Summary: "power bug" in 2.6.17 PCMCIA support
Kernel Version: 2.6.17
Status: NEW
Severity: normal
Owner: linux-pcmcia at lists.infradead.org
Submitter: kempin at in.tum.de
Most recent kernel where this bug did not occur: 2.6.16.18 (maybe later kernels
work, too)
Distribution: Gentoo Hardened 3.4.5-r1
Hardware Environment: x86 laptop Fujitsu-Siemens Amilo D7800, TI CardBus bridge
Software Environment: kernel
Problem Description:
Since I've upgraded to 2.6.17 I can't get the PCMCIA support to work. The
kernel notices when cards are inserted or removed, but I get those "power bug"
error messages (i.e. the kernel can't apply or remove the power to the PCMCIA
cards). The "power bug" FAQ didn't help.
Everything worked fine in 2.6.16.18 (using the same compiler version).
Steps to reproduce:
* relevant kernel options: lapic pci=assign-busses
* modprobe yenta_socket
Note about the "pci=assign-busses" option:
I get the following messages if I leave it out:
PCI: Bus #03 (-#06) may be hidden behind transparent bridge #02 (-#02) (try
'pci=assign-busses')
PCI: Bus #07 (-#0a) may be hidden behind transparent bridge #02 (-#02) (try
'pci=assign-busses')
Those are the cardbus bridges. So I added it to the kernel options, but it
doesn't make any difference: With 2.6.16.18 it works (whether I'm using the
option or not) and in 2.6.17 it doesn't work at all.
Here's some more information. I couldn't find any significant difference
(except the error messages) in the output of dmesg, lspci and the iomem files
regardless of which kernel version. It just works with the older kernel and not
with the newer one.
Maybe it's just a mistake of mine. Thanks in advance!
--- dmesg ---
Linux version 2.6.17 (wk at spirit) (gcc version 3.4.5 (Gentoo Hardened 3.4.5-r1,
HTB-3.4.4-1.00, ssp-3.4.5-1.0, pie-8.7.9)) #2 PREEMPT Tue Jun 20 10:03:18 CEST
2006
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003ffe0000 (usable)
BIOS-e820: 000000003ffe0000 - 000000003fff8000 (ACPI NVS)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
127MB HIGHMEM available.
896MB LOWMEM available.
On node 0 totalpages: 262112
DMA zone: 4096 pages, LIFO batch:0
Normal zone: 225280 pages, LIFO batch:31
HighMem zone: 32736 pages, LIFO batch:7
DMI 2.3 present.
ACPI: RSDP (v000 Acer ) @ 0x000fe030
ACPI: RSDT (v001 Acer TMH2 0x00000001 Acer 0x00000000) @ 0x3ffe0000
ACPI: FADT (v001 Acer TMH2 0x00000001 Acer 0x00000000) @ 0x3ffe0054
ACPI: BOOT (v001 Acer TMH2 0x00000001 Acer 0x00000000) @ 0x3ffe002c
ACPI: DSDT (v001 HTCLTD HTCXXXX 0x00001000 MSFT 0x0100000d) @ 0x00000000
ACPI: PM-Timer IO Port: 0xf108
Allocating PCI resources starting at 40000000 (gap: 3fff8000:bfff8000)
Built 1 zonelists
Kernel command line: root=/dev/hda2 ro lapic pci=assign-busses init=/bin/sh
Local APIC disabled by BIOS -- reenabling.
Found and enabled local APIC!
mapped APIC to ffffd000 (fee00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 2000.255 MHz processor.
Using pmtmr for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1032904k/1048448k available (3611k kernel code, 14912k reserved, 1782k
data, 192k init, 130944k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 4002.40 BogoMIPS (lpj=2001200)
Security Framework v1.0.0 initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 3febfbff 00000000 00000000 00000000 00000000
00000000 00000000
CPU: After vendor identify, caps: 3febfbff 00000000 00000000 00000000 00000000
00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: After all inits, caps: 3febfbff 00000000 00000000 00000080 00000000
00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
CPU0: Thermal monitoring enabled
CPU: Intel(R) Pentium(R) 4 CPU 2.00GHz stepping 04
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 0k freed
ACPI: setting ELCR to 0200 (from 0c00)
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xf0200, last bus=2
Setting up standard PCI resources
ACPI: Subsystem revision 20060127
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
PCI quirk: region f100-f17f claimed by ICH4 ACPI/GPIO/TCO
PCI quirk: region f200-f23f claimed by ICH4 GPIO
Boot video device is 0000:01:00.0
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
ACPI: PCI Interrupt Link [PILA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [PILB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [PILC] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [PILD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [PILE] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [PILF] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [PILG] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [PILH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: Embedded Controller [EC0] (gpe 29) interrupt mode.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 13 devices
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
TC classifier action (bugs to netdev at vger.kernel.org cc hadi at cyberus.ca)
pnp: 00:0c: ioport range 0xf100-0xf17f could not be reserved
pnp: 00:0c: ioport range 0xf200-0xf23f has been reserved
pnp: 00:0c: ioport range 0x4d0-0x4d1 has been reserved
pnp: 00:0c: ioport range 0x580-0x587 has been reserved
PCI: Bridge: 0000:00:01.0
IO window: a000-afff
MEM window: 80500000-805fffff
PREFETCH window: 80600000-900fffff
PCI: Bus 3, cardbus bridge: 0000:02:09.0
IO window: 00007400-000074ff
IO window: 00007800-000078ff
PREFETCH window: 40000000-41ffffff
MEM window: 46000000-47ffffff
PCI: Bus 7, cardbus bridge: 0000:02:09.1
IO window: 00007c00-00007cff
IO window: 00001000-000010ff
PREFETCH window: 42000000-43ffffff
MEM window: 48000000-49ffffff
PCI: Bridge: 0000:00:1e.0
IO window: 7000-7fff
MEM window: 80100000-801fffff
PREFETCH window: 40000000-44ffffff
PCI: Setting latency timer of device 0000:00:1e.0 to 64
ACPI: PCI Interrupt Link [PILC] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:02:09.0[A] -> Link [PILC] -> GSI 11 (level, low) ->
IRQ 11
ACPI: PCI Interrupt Link [PILG] enabled at IRQ 11
ACPI: PCI Interrupt 0000:02:09.1[B] -> Link [PILG] -> GSI 11 (level, low) ->
IRQ 11
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
Simple Boot Flag at 0x6e set to 0x80
Machine check exception polling timer started.
audit: initializing netlink socket (disabled)
audit(1150836577.739:1): initialized
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Installing knfsd (copyright (C) 1996 okir at monad.swb.de).
SGI XFS with ACLs, security attributes, large block numbers, no debug enabled
SGI XFS Quota Management subsystem
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
ACPI: AC Adapter [AC] (on-line)
ACPI: Battery Slot [BAT0] (battery present)
ACPI: Power Button (FF) [PWRF]
ACPI: Sleep Button (CM) [SLPB]
ACPI: Lid Switch [LID]
ACPI: Power Button (CM) [PWBT]
ACPI: Thermal Zone [THR1] (54 C)
ACPI: Thermal Zone [THR2] (65 C)
lp: driver loaded but no devices found
Real Time Clock Driver v1.12ac
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected an Intel i845 Chipset.
agpgart: AGP aperture is 256M @ 0xe0000000
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A
00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ACPI: PCI Interrupt Link [PILB] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [PILB] -> GSI 10 (level, low) ->
IRQ 10
ACPI: PCI interrupt for device 0000:00:1f.6 disabled
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378, irq 7 [PCSPP]
lp0: using parport0 (interrupt-driven).
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
loop: loaded (max 8 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH2: IDE controller at PCI slot 0000:00:1f.1
ICH2: chipset revision 5
ICH2: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xbc90-0xbc97, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xbc98-0xbc9f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: FUJITSU MHU2100AT, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: UJDA720 DVD/CDRW, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 195371568 sectors (100030 MB) w/8192KiB Cache, CHS=65535/16/63, UDMA(100)
hda: cache flushes supported
hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 >
hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ieee1394: Initialized config rom entry `ip1394'
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt Link [PILD] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:1f.2[D] -> Link [PILD] -> GSI 11 (level, low) ->
IRQ 11
PCI: Setting latency timer of device 0000:00:1f.2 to 64
uhci_hcd 0000:00:1f.2: UHCI Host Controller
uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1f.2: irq 11, io base 0x00008000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI Interrupt Link [PILH] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:1f.4[C] -> Link [PILH] -> GSI 11 (level, low) ->
IRQ 11
PCI: Setting latency timer of device 0000:00:1f.4 to 64
uhci_hcd 0000:00:1f.4: UHCI Host Controller
uhci_hcd 0000:00:1f.4: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1f.4: irq 11, io base 0x00008060
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
usb 1-1: new full speed USB device using uhci_hcd and address 2
usb 1-1: configuration #1 chosen from 1 choice
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
usb 1-1.1: new low speed USB device using uhci_hcd and address 3
usb 1-1.1: configuration #1 chosen from 1 choice
usb 1-1.2: new low speed USB device using uhci_hcd and address 4
usb 1-1.2: configuration #1 chosen from 1 choice
usbcore: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usbcore: registered new driver hiddev
input: AIPTEK APT-6000U as /class/input/input0
input,hiddev0: USB HID v1.01 Mouse [AIPTEK APT-6000U] on usb-0000:00:1f.2-1.1
input: CHESEN USB Keyboard as /class/input/input1
input: USB HID v1.10 Keyboard [CHESEN USB Keyboard] on usb-0000:00:1f.2-1.2
input: CHESEN USB Keyboard as /class/input/input2
input: USB HID v1.10 Device [CHESEN USB Keyboard] on usb-0000:00:1f.2-1.2
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: raid10 personality registered for level 10
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
raid5: automatically using best checksumming function: pIII_sse
pIII_sse : 2548.000 MB/sec
raid5: using function: pIII_sse (2548.000 MB/sec)
raid6: int32x1 570 MB/s
raid6: int32x2 746 MB/s
raid6: int32x4 496 MB/s
raid6: int32x8 386 MB/s
raid6: mmxx1 1644 MB/s
raid6: mmxx2 2062 MB/s
raid6: sse1x1 1007 MB/s
raid6: sse1x2 2007 MB/s
raid6: sse2x1 2207 MB/s
raid6: sse2x2 2257 MB/s
raid6: using algorithm sse2x2 (2257 MB/s)
md: raid6 personality registered for level 6
md: multipath personality registered for level -4
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
device-mapper: 4.6.0-ioctl (2006-02-17) initialised: dm-devel at redhat.com
device-mapper: dm-multipath version 1.0.4 loaded
device-mapper: dm-round-robin version 1.0.0 loaded
oprofile: using NMI interrupt.
ip_conntrack version 2.4 (8191 buckets, 65528 max) - 224 bytes per conntrack
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
p4-clockmod: P4/Xeon(TM) CPU On-Demand Clock Modulation available
Using IPI Shortcut mode
ACPI wakeup devices:
SLPB OZ68 OZ69 OBLN OBMO ICH2 LID
ACPI: (supports S0 S3 S4 S5)
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
UDF-fs: No VRS found
XFS mounting filesystem hda2
input: AT Translated Set 2 keyboard as /class/input/input3
Ending clean XFS mount for filesystem: hda2
VFS: Mounted root (xfs filesystem) readonly.
Freeing unused kernel memory: 192k freed
Synaptics Touchpad, model: 1, fw: 5.8, id: 0x9248b1, caps: 0x904713/0x4000
input: SynPS/2 Synaptics TouchPad as /class/input/input4
ACPI: PCI Interrupt 0000:02:09.0[A] -> Link [PILC] -> GSI 11 (level, low) ->
IRQ 11
Yenta: CardBus bridge found at 0000:02:09.0 [1025:1027]
Yenta: Enabling burst memory read transactions
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:02:09.0, mfunc 0x01001022, devctl 0x64
Yenta: ISA IRQ mask 0x0038, PCI irq 11
Socket status: 30000006
pcmcia: parent PCI bridge I/O window: 0x7000 - 0x7fff
pcmcia: parent PCI bridge Memory window: 0x80100000 - 0x801fffff
pcmcia: parent PCI bridge Memory window: 0x40000000 - 0x44ffffff
ACPI: PCI Interrupt 0000:02:09.1[B] -> Link [PILG] -> GSI 11 (level, low) ->
IRQ 11
Yenta: CardBus bridge found at 0000:02:09.1 [1025:1027]
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:02:09.1, mfunc 0x01001022, devctl 0x64
Yenta: ISA IRQ mask 0x0038, PCI irq 11
Socket status: 30000020
pcmcia: parent PCI bridge I/O window: 0x7000 - 0x7fff
pcmcia: parent PCI bridge Memory window: 0x80100000 - 0x801fffff
pcmcia: parent PCI bridge Memory window: 0x40000000 - 0x44ffffff
pccard: CardBus card inserted into slot 1
--- taking the card out and reinserting it: ---
pccard: card ejected from slot 1
PCMCIA: socket f7df5828: *** DANGER *** unable to remove socket power
pccard: CardBus card inserted into slot 1
-------
(In 2.6.18 it just goes on loading the card specific drivers instead of the
error message)
--- lspci -vv ---
00:00.0 Host bridge: Intel Corporation 82845 845 (Brookdale) Chipset Host
Bridge (rev 04)
Subsystem: Acer Incorporated [ALI] Unknown device 1027
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR-
Latency: 0
Region 0: Memory at e0000000 (32-bit, prefetchable) [size=256M]
Capabilities: [e4] Vendor Specific Information
Capabilities: [a0] AGP version 2.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans-
64bit- FW+ AGP3- Rate=x1,x2,x4
Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP+ GART64- 64bit- FW-
Rate=x4
00:01.0 PCI bridge: Intel Corporation 82845 845 (Brookdale) Chipset AGP Bridge
(rev 04) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: 80500000-805fffff
Prefetchable memory behind bridge: 80600000-900fffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 05) (prog-if 00
[Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=02, subordinate=0a, sec-latency=0
I/O behind bridge: 00007000-00007fff
Memory behind bridge: 80100000-801fffff
Prefetchable memory behind bridge: 40000000-44ffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
00:1f.0 ISA bridge: Intel Corporation 82801BA ISA Bridge (LPC) (rev 05)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:1f.1 IDE interface: Intel Corporation 82801BA IDE U100 (rev 05) (prog-if 80
[Master])
Subsystem: Acer Incorporated [ALI] Unknown device 1027
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Region 4: I/O ports at bc90 [size=16]
00:1f.2 USB Controller: Intel Corporation 82801BA/BAM USB (Hub #1) (rev 05)
(prog-if 00 [UHCI])
Subsystem: Acer Incorporated [ALI] Unknown device 1027
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin D routed to IRQ 11
Region 4: I/O ports at 8000 [size=32]
00:1f.3 SMBus: Intel Corporation 82801BA/BAM SMBus (rev 05)
Subsystem: Acer Incorporated [ALI] Unknown device 1027
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin B routed to IRQ 10
Region 4: I/O ports at f300 [size=16]
00:1f.4 USB Controller: Intel Corporation 82801BA/BAM USB (Hub #2) (rev 05)
(prog-if 00 [UHCI])
Subsystem: Acer Incorporated [ALI] Unknown device 1027
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin C routed to IRQ 11
Region 4: I/O ports at 8060 [size=32]
00:1f.5 Multimedia audio controller: Intel Corporation 82801BA/BAM AC'97 Audio
(rev 05)
Subsystem: Acer Incorporated [ALI] Unknown device 1027
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin B routed to IRQ 10
Region 0: I/O ports at b000 [size=256]
Region 1: I/O ports at b400 [size=64]
00:1f.6 Modem: Intel Corporation 82801BA/BAM AC'97 Modem (rev 05) (prog-if 00
[Generic])
Subsystem: Acer Incorporated [ALI] Unknown device 1027
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin B routed to IRQ 10
Region 0: I/O ports at b800 [size=256]
Region 1: I/O ports at bc00 [size=128]
01:00.0 VGA compatible controller: ATI Technologies Inc Radeon Mobility M6 LY
(prog-if 00 [VGA])
Subsystem: Acer Incorporated [ALI] Unknown device 101d
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping+ SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 11
Region 0: Memory at 88000000 (32-bit, prefetchable) [size=128M]
Region 1: I/O ports at a000 [size=256]
Region 2: Memory at 80500000 (32-bit, non-prefetchable) [size=64K]
Expansion ROM at 80520000 [disabled] [size=128K]
Capabilities: [58] AGP version 2.0
Status: RQ=48 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans-
64bit- FW- AGP3- Rate=x1,x2,x4
Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP- GART64- 64bit- FW-
Rate=<none>
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
02:03.0 FireWire (IEEE 1394): Texas Instruments TSB43AB21 IEEE-1394a-2000
Controller (PHY/Link) (prog-if 10 [OHCI])
Subsystem: Acer Incorporated [ALI] Unknown device 1027
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (500ns min, 1000ns max), Cache Line Size 08
Interrupt: pin A routed to IRQ 11
Region 0: Memory at 80100000 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at 80104000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
02:05.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ (rev 10)
Subsystem: Acer Incorporated [ALI] Unknown device 1027
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at 7000 [size=256]
Region 1: Memory at 80100800 (32-bit, non-prefetchable) [size=256]
Expansion ROM at 44000000 [disabled] [size=64K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
PME(D0-,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
02:09.0 CardBus bridge: Texas Instruments PCI1520 PC card Cardbus Controller
(rev 01)
Subsystem: Acer Incorporated [ALI] Unknown device 1027
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 168, Cache Line Size 20
Interrupt: pin A routed to IRQ 11
Region 0: Memory at 80101000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=02, secondary=03, subordinate=06, sec-latency=176
Memory window 0: 40000000-41fff000 (prefetchable)
Memory window 1: 46000000-47fff000
I/O window 0: 00007400-000074ff
I/O window 1: 00007800-000078ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
02:09.1 CardBus bridge: Texas Instruments PCI1520 PC card Cardbus Controller
(rev 01)
Subsystem: Acer Incorporated [ALI] Unknown device 1027
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 168, Cache Line Size 20
Interrupt: pin B routed to IRQ 11
Region 0: Memory at 80102000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=02, secondary=07, subordinate=0a, sec-latency=176
Memory window 0: 42000000-43fff000 (prefetchable)
Memory window 1: 48000000-49fff000
I/O window 0: 00007c00-00007cff
I/O window 1: 00001000-000010ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt- PostWrite+
16-bit legacy interface ports at 0001
-------
--- /proc/iomem ---
00000000-0009fbff : System RAM
00000000-00000000 : Crash kernel
0009fc00-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000cffff : Video ROM
000f0000-000fffff : System ROM
00100000-3ffdffff : System RAM
00100000-00486dec : Kernel code
00486ded-0064461f : Kernel data
3ffe0000-3fff7fff : ACPI Non-volatile Storage
40000000-44ffffff : PCI Bus #02
40000000-41ffffff : PCI CardBus #03
42000000-43ffffff : PCI CardBus #07
44000000-4400ffff : 0000:02:05.0
46000000-47ffffff : PCI CardBus #03
48000000-49ffffff : PCI CardBus #07
80100000-801fffff : PCI Bus #02
80100000-801007ff : 0000:02:03.0
80100800-801008ff : 0000:02:05.0
80101000-80101fff : 0000:02:09.0
80101000-80101fff : yenta_socket
80102000-80102fff : 0000:02:09.1
80102000-80102fff : yenta_socket
80104000-80107fff : 0000:02:03.0
80500000-805fffff : PCI Bus #01
80500000-8050ffff : 0000:01:00.0
80520000-8053ffff : 0000:01:00.0
80600000-900fffff : PCI Bus #01
88000000-8fffffff : 0000:01:00.0
e0000000-efffffff : 0000:00:00.0
ffff0000-ffffffff : reserved
-------
--- /proc/ioports ---
0000-001f : dma1
0020-0021 : pic1
0040-0043 : timer0
0050-0053 : timer1
0060-006f : keyboard
0070-0077 : rtc
0080-008f : dma page reg
00a0-00a1 : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
02f8-02ff : serial
0376-0376 : ide1
0378-037a : parport0
03c0-03df : vga+
03f6-03f6 : ide0
03f8-03ff : serial
04d0-04d1 : pnp 00:0c
0580-0587 : pnp 00:0c
1000-10ff : PCI CardBus #07
7000-7fff : PCI Bus #02
7000-70ff : 0000:02:05.0
7400-74ff : PCI CardBus #03
7800-78ff : PCI CardBus #03
7c00-7cff : PCI CardBus #07
8000-801f : 0000:00:1f.2
8000-801f : uhci_hcd
8060-807f : 0000:00:1f.4
8060-807f : uhci_hcd
a000-afff : PCI Bus #01
a000-a0ff : 0000:01:00.0
b000-b0ff : 0000:00:1f.5
b400-b43f : 0000:00:1f.5
b800-b8ff : 0000:00:1f.6
bc00-bc7f : 0000:00:1f.6
bc90-bc9f : 0000:00:1f.1
bc90-bc97 : ide0
bc98-bc9f : ide1
f100-f17f : 0000:00:1f.0
f100-f17f : motherboard
f100-f103 : PM1a_EVT_BLK
f104-f105 : PM1a_CNT_BLK
f108-f10b : PM_TMR
f110-f115 : ACPI CPU throttle
f128-f12b : GPE0_BLK
f12c-f12f : GPE1_BLK
f200-f23f : 0000:00:1f.0
f200-f23f : motherboard
f200-f23f : pnp 00:0c
f300-f30f : 0000:00:1f.3
-------
Additionally with 2.6.16.18:
---
0cf8-0cff : PCI conf1
---
------- You are receiving this mail because: -------
You are on the CC list for the bug, or are watching someone who is.
More information about the Bugme-new
mailing list