[Bugme-new] [Bug 8955] New: cpufreq scaling not available (Sumicom S635F, 945GM, PhoenixAward 6.00, CoreDuo L2400)

bugme-daemon at bugzilla.kernel.org bugme-daemon at bugzilla.kernel.org
Wed Aug 29 08:29:48 PDT 2007 

http://bugzilla.kernel.org/show_bug.cgi?id=8955

           Summary: cpufreq scaling not available (Sumicom S635F, 945GM,
                    PhoenixAward 6.00, CoreDuo L2400)
           Product: ACPI
           Version: 2.5
     KernelVersion: 2.6.*
          Platform: All
        OS/Version: Linux
              Tree: Mainline
            Status: NEW
          Severity: normal
          Priority: P1
         Component: BIOS
        AssignedTo: acpi_bios at kernel-bugs.osdl.org
        ReportedBy: myforumemail at arcor.de
                CC: venkatesh.pallipadi at intel.com


Most recent kernel where this bug did not occur:Always
Distribution:Gentoo (2007.0, gentoo-2.6.20-r8)
Hardware Environment:Sumicom S635F, 945GM/ICH7M, CoreDuo L2400
Software Environment: Gentoo Linux, Bios PhoenixAward 6.00
Problem Description: Cannot register cpufreq driver

How can I add attachments to this message?

Unfortunately I can't check whether frequency scaling is working on Windows.
There's no Windows at hand. If somebody points me to a windows tool I can
run under wine, I will do so.

Same result with kernel versions 2.6.19, 2.6.20, 2.6.21, 2.6.22
Same result with compiled in or module cpufreq drivers, tried
all reasonable combinations of kernel options, patched sources
with linux-phc as described at forums.gentoo: No luck.

Built kernel with:

[*] ACPI Support
  [*]   Procfs interface (deprecated) (NEW)
  <*>   AC Adapter
  <*>   Button
  <*>   Processor
  <*>     Thermal Zone
         [*]   Debug Statements
[*] CPU Frequency scaling
  [*]   Enable CPUfreq debugging
     <*>   CPU frequency translation statistics
  Default CPUFreq governor (userspace)  --->
     <*>   'performance' governor
     <*>   'powersave' governor
     ---   'userspace' governor for userspace frequency scaling
     <*>   'ondemand' cpufreq policy governor
     <*>   'conservative' cpufreq governor
     ---   CPUFreq processor drivers
        <M>   ACPI Processor P-States driver
        <M>   Intel Enhanced SpeedStep
           [(*)]     Use ACPI tables to decode valid frequency/voltage
(deprecated)
           ---     Built-in tables for Banias CPUs
        <M>   Intel Speedstep on ICH-M chipsets (ioport interface)
    ---   shared options
    [(*)]   /proc/acpi/processor/../performance interface (deprecated)
    [(*)]   Relaxed speedstep capability checks

(*) means: Tried with and without.


dmesg | grep -e 'ACPI' -e 'CPU'
 BIOS-e820: 000000007f6e0000 - 000000007f6e3000 (ACPI NVS)
 BIOS-e820: 000000007f6e3000 - 000000007f6f0000 (ACPI data)
ACPI: RSDP (v000 IntelR                                ) @ 0x000f8ba0
ACPI: RSDT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x7f6e3040
ACPI: FADT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x7f6e30c0
ACPI: MCFG (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x7f6e79c0
ACPI: MADT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x7f6e7900
ACPI: DSDT (v001 INTELR AWRDACPI 0x00001000 MSFT 0x03000000) @ 0x00000000
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
Initializing CPU#0
CPU: After generic identify, caps: bfe9fbff 00000000 00000000 00000000 0000c1a9
00000000 00000000
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU: After all inits, caps: bfe9fbff 00000000 00000000 00002940 0000c1a9
00000000 00000000
Intel machine check reporting enabled on CPU#0.
ACPI: Core revision 20060707
 tbxface-0107 [01] load_tables           : ACPI Tables successfully acquired
ACPI Namespace successfully loaded at root c050ab90
evxfevnt-0089 [02] enable                : Transition to ACPI mode successful
CPU0: Intel Genuine Intel(R) CPU           L2400  @ 1.66GHz stepping 08
Initializing CPU#1
CPU: After generic identify, caps: bfe9fbff 00000000 00000000 00000000 0000c1a9
00000000 00000000
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU: After all inits, caps: bfe9fbff 00000000 00000000 00002940 0000c1a9
00000000 00000000
Intel machine check reporting enabled on CPU#1.
CPU1: Intel Genuine Intel(R) CPU           L2400  @ 1.66GHz stepping 08
checking TSC synchronization across 2 CPUs: passed.
Brought up 2 CPUs
ACPI: bus type pci registered
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Initializing CPU#1
CPU: After generic identify, caps: bfe9fbff 00000000 00000000 00000000 0000c1a9
00000000 00000000
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU: After all inits, caps: bfe9fbff 00000000 00000000 00002940 0000c1a9
00000000 00000000
Intel machine check reporting enabled on CPU#1.
CPU1: Intel Genuine Intel(R) CPU           L2400  @ 1.66GHz stepping 08
checking TSC synchronization across 2 CPUs: passed.
Brought up 2 CPUs
ACPI: bus type pci registered
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 *7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK1] (IRQs *3 4 5 7 9 10 11 12 14 15)
PCI: Using ACPI for IRQ routing
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PWRB]
ACPI: Thermal Zone [THRM] (25 C)
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 17
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 18
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 18
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 17
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 19
ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
ACPI: PCI Interrupt 0000:00:1e.2[A] -> GSI 17 (level, low) -> IRQ 20
ACPI: PCI Interrupt 0000:02:03.0[A] -> GSI 19 (level, low) -> IRQ 17
ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 17
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16


'cpufreq.debug=7', trying to load cpufreq drivers via modprobe:

dmesg
acpi-cpufreq: acpi_cpufreq_init
acpi-cpufreq: acpi_cpufreq_early_init
cpufreq-core: trying to register driver acpi-cpufreq
cpufreq-core: adding CPU 0
acpi-cpufreq: acpi_cpufreq_cpu_init
cpufreq-core: initialization failed
cpufreq-core: adding CPU 1
acpi-cpufreq: acpi_cpufreq_cpu_init
cpufreq-core: initialization failed
cpufreq-core: no CPU initialized for driver acpi-cpufreq
cpufreq-core: unregistering CPU 0
cpufreq-core: unregistering CPU 1
cpufreq-core: trying to register driver centrino
cpufreq-core: adding CPU 0
speedstep-centrino: speedstep-centrino: obtaining ACPI data failed
speedstep-centrino: found unsupported CPU with Enhanced SpeedStep: send
/proc/cpuinfo to cpufreq at li$
cpufreq-core: initialization failed
cpufreq-core: adding CPU 1
speedstep-centrino: speedstep-centrino: obtaining ACPI data failed
cpufreq-core: initialization failed
cpufreq-core: no CPU initialized for driver centrino
cpufreq-core: unregistering CPU 0
cpufreq-core: unregistering CPU 1
speedstep-lib: x86: 6, model: e
speedstep-ich: Intel(R) SpeedStep(TM) capable processor not found


Ok, I'll stop it here. Hope to learn how attachments are used.
Result of iasl and acpidump will follow. 

TIA
Armin


-- 
Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are on the CC list for the bug, or are watching someone who is.

More information about the Bugme-new mailing list