[Bugme-new] [Bug 9175] New: ACPI several problems on ACER 5050-4697
bugme-daemon at bugzilla.kernel.org
bugme-daemon at bugzilla.kernel.org
Wed Oct 17 08:05:20 PDT 2007
http://bugzilla.kernel.org/show_bug.cgi?id=9175
Summary: ACPI several problems on ACER 5050-4697
Product: ACPI
Version: 2.5
KernelVersion: 2.6.22-sabayon
Platform: All
OS/Version: Linux
Tree: Mainline
Status: NEW
Severity: blocking
Priority: P1
Component: ACPICA-Core
AssignedTo: acpi_acpica-core at kernel-bugs.osdl.org
ReportedBy: aom1967 at gmail.com
CC: aom1967 at gmail.com
+++ This bug was initially created as a clone of Bug #9088 +++
Distribution: Sabayon x86_64
Hardware Environment: ACER aspire 5050-4872 (AMD64 laptop)
Problem Description: It is not possible with any kernel 2.6.22 or 2.6.23 to
initialize the kernel running ACPI. In order to make it run it is necessary to
disable acpi (acpi=off) or (acpi=ht). The latest kernel en which I could make
ACPI running was 2.6.20-generic
Steps to reproduce: compile kernel (under x86_64 linux) as it comes from
repository (select AMD64 generic procesor). install, reboot
on ACER Aspire 5050-4872
This is the dmesg output when running this kernel from a LiveCD (I'm running
now Ubuntu 7.04, version i386, because the version x86_86 fails too to run
ACPI. Once running, it is necessary to install the acer_acpi module in order
to make wireless card visible to the system. The battery is not recognized in
any of the kernel versions:
sabayonuser at sabayonx86-64 ~ $ dmesg
32768 (order: 6, 262144 bytes)
[ 54.941258] Mount-cache hash table entries: 256
[ 54.941416] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64
bytes/line)
[ 54.941418] CPU: L2 Cache: 512K (64 bytes/line)
[ 54.941421] CPU 0/0 -> Node 0
[ 54.941441] SMP alternatives: switching to UP code
[ 54.941826] Freeing SMP alternatives: 56k freed
[ 54.942309] ExtINT not setup in hardware but reported by MP table
[ 54.952593] Using local APIC timer interrupts.
[ 54.998006] result 12500252
[ 54.998008] Detected 12.500 MHz APIC timer.
[ 54.998524] Brought up 1 CPUs
[ 54.998679] Device driver platform lacks bus and class support for being
resumed.
[ 54.998779] NET: Registered protocol family 16
[ 54.998860] ACPI Exception (utmutex-0263): AE_BAD_PARAMETER, Thread
FFFF81001B80B060 could not acquire Mutex [1] [20070126]
[ 54.998865] No dock devices found.
[ 54.998867] ACPI Exception (utmutex-0263): AE_BAD_PARAMETER, Thread
FFFF81001B80B060 could not acquire Mutex [1] [20070126]
[ 54.998882] PCI: Using configuration type 1
[ 55.000988] ACPI: Interpreter disabled.
[ 55.000993] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 55.001003] pnp: PnP ACPI: disabled
[ 55.001111] SCSI subsystem initialized
[ 55.001136] libata version 2.21 loaded.
[ 55.001215] usbcore: registered new interface driver usbfs
[ 55.001218] USB driver usbfs lacks resume support.
[ 55.001252] usbcore: registered new interface driver hub
[ 55.001284] usbcore: registered new device driver usb
[ 55.001318] PCI: Probing PCI hardware
[ 55.001325] PCI: Probing PCI hardware (bus 00)
[ 55.001341] Device driver pci0000:00 lacks bus and class support for being
resumed.
[ 55.003209] PCI: Transparent bridge - 0000:00:14.4
[ 55.003283] PCI: Bus #09 (-#0c) is hidden behind transparent bridge #08
(-#09) (try 'pci=assign-busses')
[ 55.003286] Please report the result to linux-kernel to fix this permanently
[ 55.004319] PCI: Using IRQ router default [1002/4372] at 0000:00:14.0
[ 55.004331] PCI->APIC IRQ transform: 0000:00:12.0[A] -> IRQ 22
[ 55.004335] PCI->APIC IRQ transform: 0000:00:13.0[A] -> IRQ 19
[ 55.004339] PCI->APIC IRQ transform: 0000:00:13.1[A] -> IRQ 19
[ 55.004343] PCI->APIC IRQ transform: 0000:00:13.2[A] -> IRQ 19
[ 55.004348] PCI->APIC IRQ transform: 0000:00:14.1[A] -> IRQ 16
[ 55.004352] PCI->APIC IRQ transform: 0000:00:14.2[A] -> IRQ 16
[ 55.004363] PCI: using PPB 0000:00:14.4[B] to get irq 16
[ 55.004365] PCI->APIC IRQ transform: 0000:08:01.0[B] -> IRQ 16
[ 55.004369] PCI: using PPB 0000:00:14.4[C] to get irq 16
[ 55.004371] PCI->APIC IRQ transform: 0000:08:01.1[C] -> IRQ 16
[ 55.004375] PCI: using PPB 0000:00:14.4[C] to get irq 16
[ 55.004377] PCI->APIC IRQ transform: 0000:08:01.2[C] -> IRQ 16
[ 55.004381] PCI: using PPB 0000:00:14.4[C] to get irq 16
[ 55.004383] PCI->APIC IRQ transform: 0000:08:01.3[C] -> IRQ 16
[ 55.004388] PCI: using PPB 0000:00:14.4[C] to get irq 16
[ 55.004389] PCI->APIC IRQ transform: 0000:08:01.4[C] -> IRQ 16
[ 55.004394] PCI: using PPB 0000:00:14.4[C] to get irq 16
[ 55.004395] PCI->APIC IRQ transform: 0000:08:02.0[C] -> IRQ 16
[ 55.004401] PCI: Cannot allocate resource region 7 of bridge 0000:00:05.0
[ 55.004406] PCI: Cannot allocate resource region 8 of bridge 0000:00:05.0
[ 55.004409] PCI: Cannot allocate resource region 7 of bridge 0000:00:06.0
[ 55.004411] PCI: Cannot allocate resource region 8 of bridge 0000:00:06.0
[ 55.004414] PCI: Cannot allocate resource region 7 of bridge 0000:00:07.0
[ 55.004416] PCI: Cannot allocate resource region 8 of bridge 0000:00:07.0
[ 55.004544] NetLabel: Initializing
[ 55.004546] NetLabel: domain hash size = 128
[ 55.004547] NetLabel: protocols = UNLABELED CIPSOv4
[ 55.004561] NetLabel: unlabeled traffic allowed by default
[ 55.005019] PCI: Bridge: 0000:00:01.0
[ 55.005021] IO window: 9000-9fff
[ 55.005025] MEM window: d0100000-d01fffff
[ 55.005028] PREFETCH window: d4000000-d7ffffff
[ 55.005030] PCI: Bridge: 0000:00:04.0
[ 55.005031] IO window: disabled.
[ 55.005034] MEM window: d0200000-d02fffff
[ 55.005036] PREFETCH window: disabled.
[ 55.005038] PCI: Bridge: 0000:00:05.0
[ 55.005040] IO window: disabled.
[ 55.005042] MEM window: disabled.
[ 55.005044] PREFETCH window: disabled.
[ 55.005046] PCI: Bridge: 0000:00:06.0
[ 55.005047] IO window: disabled.
[ 55.005049] MEM window: disabled.
[ 55.005051] PREFETCH window: disabled.
[ 55.005053] PCI: Bridge: 0000:00:07.0
[ 55.005055] IO window: disabled.
[ 55.005057] MEM window: disabled.
[ 55.005059] PREFETCH window: disabled.
[ 55.005068] PCI: Bus 9, cardbus bridge: 0000:08:01.0
[ 55.005070] IO window: 0000a400-0000a4ff
[ 55.005075] IO window: 0000a800-0000a8ff
[ 55.005081] PREFETCH window: 30000000-33ffffff
[ 55.005088] MEM window: 38000000-3bffffff
[ 55.005093] PCI: Bridge: 0000:00:14.4
[ 55.005097] IO window: a000-afff
[ 55.005103] MEM window: d0300000-d03fffff
[ 55.005108] PREFETCH window: 30000000-33ffffff
[ 55.005124] PCI: Enabling device 0000:00:04.0 (0000 -> 0002)
[ 55.005127] PCI: Setting latency timer of device 0000:00:04.0 to 64
[ 55.005134] PCI: Setting latency timer of device 0000:00:05.0 to 64
[ 55.005140] PCI: Setting latency timer of device 0000:00:06.0 to 64
[ 55.005146] PCI: Setting latency timer of device 0000:00:07.0 to 64
[ 55.005171] PCI: Enabling device 0000:08:01.0 (0004 -> 0007)
[ 55.005241] NET: Registered protocol family 2
[ 55.005478] Time: tsc clocksource has been installed.
[ 55.012530] IP route cache hash table entries: 4096 (order: 3, 32768 bytes)
[ 55.012628] TCP established hash table entries: 16384 (order: 6, 393216
bytes)
[ 55.012847] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[ 55.013008] TCP: Hash tables configured (established 16384 bind 16384)
[ 55.013011] TCP reno registered
[ 55.015618] checking if image is initramfs... it is
[ 55.235745] Freeing initrd memory: 4091k freed
[ 55.238961] audit: initializing netlink socket (disabled)
[ 55.238975] audit(1191516121.328:1): initialized
[ 55.239021] Total HugeTLB memory allocated, 0
[ 55.239089] VFS: Disk quotas dquot_6.5.1
[ 55.239098] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 55.239168] squashfs: version 3.2-r2 (2007/01/15) Phillip Lougher
[ 55.239171] Registering unionfs 20060916-2203
[ 55.239173] unionfs: debugging is not enabled
[ 55.239198] Coda Kernel/Venus communications, v5.3.20, coda at cs.cmu.edu
[ 55.239449] Installing knfsd (copyright (C) 1996 okir at monad.swb.de).
[ 55.239741] NTFS driver 2.1.28 [Flags: R/W].
[ 55.239778] QNX4 filesystem 0.2.3 registered.
[ 55.239781] fuse init (API version 7.8)
[ 55.239860] JFS: nTxBlock = 3433, nTxLock = 27470
[ 55.241650] SGI XFS with ACLs, security attributes, realtime, large
block/inode numbers, no debug enabled
[ 55.241776] SGI XFS Quota Management subsystem
[ 55.241811] SELinux: Registering netfilter hooks
[ 55.241920] io scheduler noop registered
[ 55.241922] io scheduler anticipatory registered
[ 55.241923] io scheduler deadline registered
[ 55.241934] io scheduler cfq registered (default)
[ 55.241939] PCI: MSI quirk detected. MSI deactivated.
[ 55.679909] Boot video device is 0000:01:05.0
[ 55.680060] PCI: Setting latency timer of device 0000:00:04.0 to 64
[ 55.680078] assign_interrupt_mode Found MSI capability
[ 55.680082] Allocate Port Service[0000:00:04.0:pcie00]
[ 55.680118] Allocate Port Service[0000:00:04.0:pcie02]
[ 55.680169] PCI: Setting latency timer of device 0000:00:05.0 to 64
[ 55.680186] assign_interrupt_mode Found MSI capability
[ 55.680188] Allocate Port Service[0000:00:05.0:pcie00]
[ 55.680238] PCI: Setting latency timer of device 0000:00:06.0 to 64
[ 55.680255] assign_interrupt_mode Found MSI capability
[ 55.680257] Allocate Port Service[0000:00:06.0:pcie00]
[ 55.680306] PCI: Setting latency timer of device 0000:00:07.0 to 64
[ 55.680323] assign_interrupt_mode Found MSI capability
[ 55.680325] Allocate Port Service[0000:00:07.0:pcie00]
[ 55.707071] lp: driver loaded but no devices found
[ 55.707165] Real Time Clock Driver v1.12ac
[ 55.711235] ppdev: user-space parallel port driver
[ 55.711240] Linux agpgart interface v0.102 (c) Dave Jones
[ 55.711354] vesafb: framebuffer at 0xd4000000, mapped to 0xffffc20000400000,
using 3072k, total 16384k
[ 55.711357] vesafb: mode is 1024x768x16, linelength=2048, pages=9
[ 55.711360] vesafb: scrolling: redraw
[ 55.711362] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[ 55.756639] Console: switching to colour frame buffer device 128x48
[ 55.798847] fbsplash: console 0 using theme 'sabayon'
[ 56.098518] fbsplash: switched splash state to 'on' on console 0
[ 56.098837] fb0: VESA VGA frame buffer device
[ 56.098854] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing
enabled
[ 56.100197] PCI driver parport_pc lacks driver specific resume support.
[ 59.108513] floppy0: no floppy controllers found
[ 59.108981] RAMDISK driver initialized: 16 RAM disks of 16384K size 1024
blocksize
[ 59.111079] loop: module loaded
[ 59.111083] Compaq SMART2 Driver (v 2.6.0)
[ 59.111134] PCI driver cpqarray lacks driver specific resume support.
[ 59.111137] HP CISS Driver (v 3.6.14)
[ 59.111169] PCI driver cciss lacks driver specific resume support.
[ 59.111197] PCI driver DAC960 lacks driver specific resume support.
[ 59.111305] v2.3 : Micro Memory(tm) PCI memory board block driver
[ 59.111336] PCI driver umem lacks driver specific resume support.
[ 59.111339] MM: desc_per_page = 128
[ 59.111397] Device driver lo lacks bus and class support for being resumed.
[ 59.111451] PCI driver hp100 lacks driver specific resume support.
[ 59.111651] input: Macintosh mouse button emulation as /class/input/input0
[ 59.111676] Loading iSCSI transport class v2.0-724.
[ 59.111767] iscsi: registered transport (tcp)
[ 59.111861] PCI driver arcmsr lacks driver specific resume support.
[ 59.111906] PCI driver aic7xxx lacks driver specific resume support.
[ 59.111958] PCI driver aic79xx lacks driver specific resume support.
[ 59.111960] Adaptec aacraid driver (1.1-5[2437]-mh4)
[ 59.111995] PCI driver aacraid lacks driver specific resume support.
[ 59.112010] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
[ 59.112056] PCI driver aic94xx lacks driver specific resume support.
[ 59.112082] PCI driver ips lacks driver specific resume support.
[ 59.112131] PCI driver qla1280 lacks driver specific resume support.
[ 59.112143] QLogic Fibre Channel HBA Driver
[ 59.112179] PCI driver qla2xxx lacks driver specific resume support.
[ 59.112211] iscsi: registered transport (qla4xxx)
[ 59.112240] PCI driver qla4xxx lacks driver specific resume support.
[ 59.112242] QLogic iSCSI HBA Driver
[ 59.112243] Emulex LightPulse Fibre Channel SCSI driver 8.1.12
[ 59.112245] Copyright(c) 2004-2007 Emulex. All rights reserved.
[ 59.112279] PCI driver lpfc lacks driver specific resume support.
[ 59.112309] PCI driver dmx3191d lacks driver specific resume support.
[ 59.112345] PCI driver sym53c8xx lacks driver specific resume support.
[ 59.112377] PCI driver dc395x lacks driver specific resume support.
[ 59.112380] DC390: clustering now enabled by default. If you get problems
load
[ 59.112381] with "disable_clustering=1" and report to maintainers
[ 59.112412] PCI driver tmscsim lacks driver specific resume support.
[ 59.112446] PCI driver megaraid_legacy lacks driver specific resume support.
[ 59.112450] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST
2006)
[ 59.112454] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
[ 59.112485] PCI driver megaraid lacks driver specific resume support.
[ 59.112487] megasas: 00.00.03.10-rc5 Thu May 17 10:09:32 PDT 2007
[ 59.112527] PCI driver megaraid_sas lacks driver specific resume support.
[ 59.112556] PCI driver atp870u lacks driver specific resume support.
[ 59.112559] GDT-HA: Storage RAID Controller Driver. Version: 3.05
[ 59.112652] GDT-HA: Found 0 PCI Storage RAID Controllers
[ 59.112681] PCI driver inia100 lacks driver specific resume support.
[ 59.112684] 3ware Storage Controller device driver for Linux v1.26.02.002.
[ 59.112713] PCI driver 3w-xxxx lacks driver specific resume support.
[ 59.112715] 3ware 9000 Storage Controller device driver for Linux
v2.26.02.008.
[ 59.112741] PCI driver 3w-9xxx lacks driver specific resume support.
[ 59.112743] ipr: IBM Power RAID SCSI Device Driver version: 2.4.1 (April 24,
2007)
[ 59.112775] PCI driver ipr lacks driver specific resume support.
[ 59.112778] RocketRAID 3xxx SATA Controller driver v1.0 (060426)
[ 59.112807] PCI driver hptiop lacks driver specific resume support.
[ 59.112809] stex: Promise SuperTrak EX Driver version: 3.6.0000.1
[ 59.112837] PCI driver stex lacks driver specific resume support.
[ 59.112840] st: Version 20070203, fixed bufsize 32768, s/g segs 256
[ 59.112880] osst :I: Tape driver with OnStream support version 0.99.4
[ 59.112881] osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
[ 59.113030] PCI driver sata_svw lacks driver specific resume support.
[ 59.113087] PCI driver sata_promise lacks driver specific resume support.
[ 59.113115] PCI driver sata_qstor lacks driver specific resume support.
[ 59.113143] sata_sil 0000:00:12.0: version 2.2
[ 59.113190] PCI: Enabling device 0000:00:12.0 (0005 -> 0007)
[ 59.113474] scsi0 : sata_sil
[ 59.113508] Device driver host0 lacks bus and class support for being
resumed.
[ 59.113585] scsi1 : sata_sil
[ 59.113591] Device driver host1 lacks bus and class support for being
resumed.
[ 59.113630] ata1: SATA max UDMA/100 cmd 0xffffc200003e6080 ctl
0xffffc200003e608a bmdma 0xffffc200003e6000 irq 22
[ 59.113636] ata2: SATA max UDMA/100 cmd 0xffffc200003e60c0 ctl
0xffffc200003e60ca bmdma 0xffffc200003e6008 irq 22
[ 59.567091] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 59.570718] ata1.00: ATA-7: Hitachi HTS541612J9SA00, SBDOC70P, max UDMA/100
[ 59.570721] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 59.577705] ata1.00: configured for UDMA/100
[ 59.880767] ata2: SATA link down (SStatus 0 SControl 310)
[ 59.880786] Device driver target0:0:0 lacks bus and class support for being
resumed.
[ 59.880850] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54161 SBDO
PQ: 0 ANSI: 5
[ 59.880943] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034
MB)
[ 59.880953] sd 0:0:0:0: [sda] Write Protect is off
[ 59.880955] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 59.880969] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 59.881020] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034
MB)
[ 59.881028] sd 0:0:0:0: [sda] Write Protect is off
[ 59.881030] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 59.881043] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 59.881046] sda: sda1 sda2 < sda5 >
[ 60.310255] sd 0:0:0:0: [sda] Attached SCSI disk
[ 60.310315] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 60.310444] PCI driver sata_vsc lacks driver specific resume support.
[ 60.310471] PCI driver sata_sis lacks driver specific resume support.
[ 60.310500] PCI driver sata_sx4 lacks driver specific resume support.
[ 60.310557] PCI driver sata_uli lacks driver specific resume support.
[ 60.310588] PCI driver sata_mv lacks driver specific resume support.
[ 60.310643] PCI driver pdc_adma lacks driver specific resume support.
[ 60.310722] PCI driver pata_artop lacks driver specific resume support.
[ 60.310807] PCI: Setting latency timer of device 0000:00:14.1 to 64
[ 60.310859] scsi2 : pata_atiixp
[ 60.310869] Device driver host2 lacks bus and class support for being
resumed.
[ 60.310918] scsi3 : pata_atiixp
[ 60.310926] Device driver host3 lacks bus and class support for being
resumed.
[ 60.310958] ata3: PATA max UDMA/100 cmd 0x00000000000101f0 ctl
0x00000000000103f6 bmdma 0x0000000000018420 irq 14
[ 60.310962] ata4: PATA max UDMA/100 cmd 0x0000000000010170 ctl
0x0000000000010376 bmdma 0x0000000000018428 irq 15
[ 60.618532] ata3.00: ATAPI: Optiarc DVD RW AD-7560A, DX06, max UDMA/33
[ 60.778369] ata3.00: configured for UDMA/33
[ 60.928805] Device driver target2:0:0 lacks bus and class support for being
resumed.
[ 60.929715] scsi 2:0:0:0: CD-ROM Optiarc DVD RW AD-7560A DX06
PQ: 0 ANSI: 5
[ 60.932939] sr0: scsi3-mmc drive: 62x/62x writer dvd-ram cd/rw xa/form2 cdda
tray
[ 60.932942] Uniform CD-ROM driver Revision: 3.20
[ 60.933005] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 60.933062] sr 2:0:0:0: Attached scsi generic sg1 type 5
[ 60.933296] PCI driver pata_hpt37x lacks driver specific resume support.
[ 60.933324] PCI driver pata_hpt3x2n lacks driver specific resume support.
[ 60.933650] PCI driver pata_pdc2027x lacks driver specific resume support.
[ 60.933874] PCI driver pata_sl82c105 lacks driver specific resume support.
[ 60.933962] I2O subsystem v1.325
[ 60.933964] i2o: max drivers = 8
[ 60.934049] PCI driver PCI_I2O lacks driver specific resume support.
[ 60.934051] I2O Configuration OSM v1.323
[ 60.934107] I2O Bus Adapter OSM v1.317
[ 60.934129] I2O Block Device OSM v1.325
[ 60.934205] I2O SCSI Peripheral OSM v1.316
[ 60.934227] I2O ProcFS OSM v1.316
[ 60.934251] Fusion MPT base driver 3.04.04
[ 60.934253] Copyright (c) 1999-2007 LSI Logic Corporation
[ 60.934258] Fusion MPT SPI Host driver 3.04.04
[ 60.934301] Fusion MPT FC Host driver 3.04.04
[ 60.934340] Fusion MPT SAS Host driver 3.04.04
[ 60.934380] Fusion MPT misc device (ioctl) driver 3.04.04
[ 60.934409] mptctl: Registered with Fusion MPT base driver
[ 60.934411] mptctl: /dev/mptctl @ (major,minor=10,220)
[ 60.934413] Fusion MPT LAN driver 3.04.04
[ 60.934487] usbcore: registered new interface driver usblp
[ 60.934489] drivers/usb/class/usblp.c: v0.13: USB Printer Device Class
driver
[ 60.934491] Initializing USB Mass Storage driver...
[ 60.934522] usbcore: registered new interface driver usb-storage
[ 60.934524] USB Mass Storage support registered.
[ 60.934552] usbcore: registered new interface driver libusual
[ 60.934554] USB driver libusual lacks resume support.
[ 60.934641] PNP: No PS/2 controller found. Probing ports directly.
[ 60.936684] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 60.938672] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 60.938676] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 60.938679] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 60.938681] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 60.938684] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 60.943148] parkbd: no such parport
[ 60.943263] PCI driver pcips2 lacks driver specific resume support.
[ 60.943358] mice: PS/2 mouse device common for all mice
[ 60.976189] input: AT Translated Set 2 keyboard as /class/input/input1
[ 61.806470] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1280b1, caps:
0xa04713/0x204000
[ 61.849223] input: SynPS/2 Synaptics TouchPad as /class/input/input2
[ 61.851725] md: linear personality registered for level -1
[ 61.851728] md: raid0 personality registered for level 0
[ 61.851730] md: raid1 personality registered for level 1
[ 61.851732] md: raid10 personality registered for level 10
[ 61.868678] raid6: int64x1 2000 MB/s
[ 61.885642] raid6: int64x2 2570 MB/s
[ 61.902633] raid6: int64x4 2492 MB/s
[ 61.919602] raid6: int64x8 1785 MB/s
[ 61.936582] raid6: sse2x1 3042 MB/s
[ 61.953560] raid6: sse2x2 4050 MB/s
[ 61.970536] raid6: sse2x4 4164 MB/s
[ 61.970538] raid6: using algorithm sse2x4 (4164 MB/s)
[ 61.970541] md: raid6 personality registered for level 6
[ 61.970543] md: raid5 personality registered for level 5
[ 61.970545] md: raid4 personality registered for level 4
[ 61.970547] raid5: automatically using best checksumming function:
generic_sse
[ 61.975526] generic_sse: 6772.000 MB/sec
[ 61.975528] raid5: using function: generic_sse (6772.000 MB/sec)
[ 61.975530] md: multipath personality registered for level -4
[ 61.975532] md: faulty personality registered for level -5
[ 61.975597] device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised:
dm-devel at redhat.com
[ 61.975705] dcdbas dcdbas: Dell Systems Management Base Driver (version
5.6.0-3.2)
[ 61.975743] usbcore: registered new interface driver hiddev
[ 61.975746] USB driver hiddev lacks resume support.
[ 61.975769] usbcore: registered new interface driver usbhid
[ 61.975771] drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 61.975803] Advanced Linux Sound Architecture Driver Version 1.0.14 (Thu May
31 09:03:25 2007 UTC).
[ 61.975842] ALSA device list:
[ 61.975844] No soundcards found.
[ 61.975898] TCP bic registered
[ 61.975905] NET: Registered protocol family 1
[ 61.975908] NET: Registered protocol family 17
[ 61.975981] powernow-k8: Found 1 AMD Turion(tm) 64 Mobile Technology MK-38
processors (version 2.00.00)
[ 61.986302] powernow-k8: 0 : fid 0x0 (800 MHz), vid 0x18
[ 61.986304] powernow-k8: 1 : fid 0x8 (1600 MHz), vid 0x11
[ 61.986306] powernow-k8: 2 : fid 0xa (1800 MHz), vid 0xf
[ 61.986309] powernow-k8: 3 : fid 0xc (2000 MHz), vid 0xd
[ 61.986311] powernow-k8: 4 : fid 0xe (2200 MHz), vid 0xb
[ 61.986361] Suspend v2.2.10
[ 61.986399] Suspend2 Checksumming support registered.
[ 61.986423] Suspend2 Userspace Storage Manager support registered.
[ 61.986446] Suspend2 Basic User Interface support registered.
[ 61.986470] Suspend2 Compressor support registered.
[ 61.986496] Suspend2 Block I/O support registered.
[ 61.986519] Suspend2 Swap Allocator support registered.
[ 61.986543] Suspend2 File Allocator support registered.
[ 61.986547] Suspend2 Userspace UI support registered.
[ 61.986670] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 61.986679] Freeing unused kernel memory: 396k freed
[ 62.228395] ata1: hard resetting port
[ 62.785959] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 62.796585] ata1.00: configured for UDMA/100
[ 62.796591] ata1: EH complete
[ 62.820082] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034
MB)
[ 62.820094] sd 0:0:0:0: [sda] Write Protect is off
[ 62.820097] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 62.820110] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 62.985398] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 62.985525] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus
number 1
[ 62.985581] ehci_hcd 0000:00:13.2: irq 19, io mem 0xd0007000
[ 62.985593] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec
2004
[ 62.985731] Device driver usbdev1.1_ep00 lacks bus and class support for
being resumed.
[ 62.985745] usb usb1: configuration #1 chosen from 1 choice
[ 62.985786] hub 1-0:1.0: USB hub found
[ 62.985792] hub 1-0:1.0: 8 ports detected
[ 63.086681] Device driver usbdev1.1_ep81 lacks bus and class support for
being resumed.
[ 63.112932] USB Universal Host Controller Interface driver v3.0
[ 63.180661] sl811: driver sl811-hcd, 19 May 2005
[ 63.287958] Intel(R) PRO/1000 Network Driver - version 7.3.20-k2
[ 63.287962] Copyright (c) 1999-2006 Intel Corporation.
[ 63.472274] usb 1-3: new high speed USB device using ehci_hcd and address 3
[ 63.842121] Device driver usbdev1.3_ep00 lacks bus and class support for
being resumed.
[ 63.842129] usb 1-3: configuration #1 chosen from 1 choice
[ 63.851155] Device driver usbdev1.3_ep82 lacks bus and class support for
being resumed.
[ 64.352475] No storage allocator is currently active. Rechecking whether we
can use one.
[ 64.352480] Suspend2: Resume2 parameter is empty. Suspending will be
disabled.
[ 64.352485] Compression Driver: Argh! Nothing follows me in the pipeline!
[ 64.352488] Compressor didn't initialise okay.
[ 64.352489] Suspend2: Initialise modules failed!
[ 64.930706] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 64.935519] Unable to load NLS charset iso8859-1
[ 64.940232] Unable to load NLS charset iso8859-1
[ 64.996683] ISO 9660 Extensions: RRIP_1991A
[ 76.793235] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 76.827179] PCI driver shpchp lacks driver specific resume support.
[ 76.827182] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 77.149560] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI)
Driver
[ 77.150270] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 77.150715] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus
number 2
[ 77.150738] ohci_hcd 0000:00:13.0: irq 19, io mem 0xd0005000
[ 77.169771] ath_hal: module license 'Proprietary' taints kernel.
[ 77.202758] Device driver usbdev2.1_ep00 lacks bus and class support for
being resumed.
[ 77.202775] usb usb2: configuration #1 chosen from 1 choice
[ 77.203108] hub 2-0:1.0: USB hub found
[ 77.203127] hub 2-0:1.0: 4 ports detected
[ 77.224949] ath_hal: 0.9.30.13 (AR5210, AR5211, AR5212, AR5416, RF5111,
RF5112, RF2413, RF5413, RF2133)
[ 77.303064] wlan: 0.8.4.2 (0.9.4)
[ 77.304291] Device driver usbdev2.1_ep81 lacks bus and class support for
being resumed.
[ 77.304750] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 77.305193] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus
number 3
[ 77.305216] ohci_hcd 0000:00:13.1: irq 19, io mem 0xd0006000
[ 77.340915] ath_pci: no version for "ieee80211_encap" found: kernel tainted.
[ 77.357644] Device driver usbdev3.1_ep00 lacks bus and class support for
being resumed.
[ 77.357661] usb usb3: configuration #1 chosen from 1 choice
[ 77.358002] hub 3-0:1.0: USB hub found
[ 77.358018] hub 3-0:1.0: 4 ports detected
[ 77.381842] ath_pci: 0.9.4.5 (0.9.4)
[ 77.454870] sdhci: Secure Digital Host Controller Interface driver
[ 77.454879] sdhci: Copyright(c) Pierre Ossman
[ 77.459765] Device driver usbdev3.1_ep81 lacks bus and class support for
being resumed.
[ 77.459898] PCI: Enabling device 0000:02:00.0 (0000 -> 0002)
[ 77.459915] PCI: Setting latency timer of device 0000:02:00.0 to 64
[ 77.484238] MadWifi: unable to attach hardware: 'Hardware revision not
supported' (HAL status 13)
[ 77.537647] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 77.599871] piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device
[ 77.599921] Device driver i2c-0 lacks bus and class support for being
resumed.
[ 77.599937] PCI driver piix4_smbus lacks driver specific resume support.
[ 77.600026] sdhci: SDHCI controller found at 0000:08:01.2 [1524:0550] (rev
1)
[ 77.600232] Device driver mmc0 lacks bus and class support for being
resumed.
[ 77.600250] mmc0: SDHCI at 0xd0301400 irq 16 DMA
[ 77.600877] PCI driver k8temp lacks driver specific resume support.
[ 77.601186] Yenta: CardBus bridge found at 0000:08:01.0 [1025:010f]
[ 77.601214] Yenta: Using CSCINT to route CSC interrupts to PCI
[ 77.601217] Yenta: Routing CardBus interrupts to PCI
[ 77.601223] Yenta TI: socket 0000:08:01.0, mfunc 0x00001202, devctl 0x44
[ 77.702472] Yenta TI: socket 0000:08:01.0 probing PCI interrupt failed,
trying to fix
[ 77.743418] usb 3-1: new low speed USB device using ohci_hcd and address 2
[ 77.803371] Yenta TI: socket 0000:08:01.0 no PCI interrupts. Fish. Please
report.
[ 77.803379] Yenta: no PCI IRQ, CardBus support disabled for this socket.
[ 77.803381] Yenta: check your BIOS CardBus, BIOS IRQ or ACPI settings.
[ 77.926078] Yenta: ISA IRQ mask 0x02f8, PCI irq 0
[ 77.926082] Socket status: 30000006
[ 77.926085] Yenta: Raising subordinate bus# of parent bus (#08) from #09 to
#0c
[ 77.926090] pcmcia: parent PCI bridge I/O window: 0xa000 - 0xafff
[ 77.926094] pcmcia: parent PCI bridge Memory window: 0xd0300000 - 0xd03fffff
[ 77.926098] pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x33ffffff
[ 77.926397] Device driver usbdev3.2_ep00 lacks bus and class support for
being resumed.
[ 77.926406] usb 3-1: configuration #1 chosen from 1 choice
[ 77.933468] input: PS/2+USB Mouse as /class/input/input3
[ 77.933515] input: USB HID v1.11 Mouse [PS/2+USB Mouse] on
usb-0000:00:13.1-1
[ 77.933554] Device driver usbdev3.2_ep81 lacks bus and class support for
being resumed.
[ 78.179001] Device driver pcmcia_socket0 lacks bus and class support for
being resumed.
[ 78.181006] 8139cp 0000:08:02.0: This (id 10ec:8139 rev 10) is not an 8139C+
compatible chip
[ 78.181009] 8139cp 0000:08:02.0: Try the "8139too" driver instead.
[ 78.187845] 8139too Fast Ethernet driver 0.9.28
[ 78.189649] Device driver eth0 lacks bus and class support for being
resumed.
[ 78.189677] eth0: RealTek RTL8139 at 0xffffc200008bac00, 00:1b:24:4c:9b:19,
IRQ 16
[ 78.189680] eth0: Identified 8139 chip type 'RTL-8100B/8139D'
[ 85.195452] vboxdrv: Trying to deactivate NMI watchdog permanently...
[ 85.195456] vboxdrv: Successfully done.
[ 116.574717] [fglrx] Maximum main memory to use for locked dma buffers: 363
MBytes.
[ 116.574724] [fglrx] USWC is disabled in module parameters
[ 116.574727] [fglrx] PAT is disabled!
[ 116.574903] [fglrx] module loaded - fglrx 8.40.4 [Jul 31 2007] on minor 0
[ 123.043585] Marking TSC unstable due to cpufreq changes
[ 123.043780] Time: jiffies clocksource has been installed.
[ 130.944632] VFS: Can't find ext4 filesystem on dev loop1.
[ 130.984174] hda-intel: Invalid position buffer, using LPIB read method
instead.
[ 133.721187] fbsplash: console 1 using theme 'sabayon'
[ 133.727019] fbsplash: switched splash state to 'on' on console 1
[ 133.738127] fbsplash: console 2 using theme 'sabayon'
[ 133.743599] fbsplash: switched splash state to 'on' on console 2
[ 133.754497] fbsplash: console 3 using theme 'sabayon'
[ 133.760029] fbsplash: switched splash state to 'on' on console 3
[ 133.779188] fbsplash: console 4 using theme 'sabayon'
[ 133.784683] fbsplash: switched splash state to 'on' on console 4
[ 133.796936] fbsplash: console 5 using theme 'sabayon'
[ 133.802372] fbsplash: switched splash state to 'on' on console 5
[ 133.813072] fbsplash: console 11 using theme 'sabayon'
[ 133.818592] fbsplash: switched splash state to 'on' on console 11
[ 139.591480] [fglrx] total GART = 130023424
[ 139.591488] [fglrx] free GART = 114032640
[ 139.591491] [fglrx] max single GART = 114032640
[ 139.591494] [fglrx] total LFB = 67108864
[ 139.591496] [fglrx] free LFB = 52719616
[ 139.591499] [fglrx] max single LFB = 52719616
[ 139.591501] [fglrx] total Inv = 0
[ 139.591503] [fglrx] free Inv = 0
[ 139.591505] [fglrx] max single Inv = 0
[ 139.591507] [fglrx] total TIM = 0
[ 143.018755] eth0: link down
[ 147.817527] atkbd.c: Spurious ACK on isa0060/serio0. Some program might be
trying access hardware directly.
[ 148.181263] atkbd.c: Spurious ACK on isa0060/serio0. Some program might be
trying access hardware directly.
And, this is the dmesg output when running Ubuntu 7.04 version i386, in the
same computer, where ACPI works, with the issues mentioned before:
[ 0.000000] Linux version 2.6.20-16-generic (root at terranova) (gcc version
4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Sun Sep 23 19:50:39 UTC 2007 (Ubuntu
2.6.20-16.32-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] sanitize start
[ 0.000000] sanitize end
[ 0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009dc00
end: 000000000009dc00 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000000009dc00 size: 0000000000002400
end: 00000000000a0000 type: 2
[ 0.000000] copy_e820_map() start: 00000000000d0000 size: 0000000000030000
end: 0000000000100000 type: 2
[ 0.000000] copy_e820_map() start: 0000000000100000 size: 000000001bd90000
end: 000000001be90000 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000001be90000 size: 000000000000a000
end: 000000001be9a000 type: 3
[ 0.000000] copy_e820_map() start: 000000001be9a000 size: 0000000000066000
end: 000000001bf00000 type: 4
[ 0.000000] copy_e820_map() start: 000000001bf00000 size: 0000000004100000
end: 0000000020000000 type: 2
[ 0.000000] copy_e820_map() start: 00000000e0000000 size: 0000000010000000
end: 00000000f0000000 type: 2
[ 0.000000] copy_e820_map() start: 00000000fec00000 size: 0000000000010000
end: 00000000fec10000 type: 2
[ 0.000000] copy_e820_map() start: 00000000fee00000 size: 0000000000001000
end: 00000000fee01000 type: 2
[ 0.000000] copy_e820_map() start: 00000000fff80000 size: 0000000000080000
end: 0000000100000000 type: 2
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
[ 0.000000] BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000d0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001be90000 (usable)
[ 0.000000] BIOS-e820: 000000001be90000 - 000000001be9a000 (ACPI data)
[ 0.000000] BIOS-e820: 000000001be9a000 - 000000001bf00000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000001bf00000 - 0000000020000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 446MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000f8a60
[ 0.000000] Entering add_active_range(0, 0, 114320) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 114320
[ 0.000000] HighMem 114320 -> 114320
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 114320
[ 0.000000] On node 0 totalpages: 114320
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 861 pages used for memmap
[ 0.000000] Normal zone: 109363 pages, LIFO batch:31
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP (v000 PTLTD ) @
0x000f8a30
[ 0.000000] ACPI: RSDT (v001 PTLTD RSDT 0x06040000 LTP 0x00000000) @
0x1be92d4c
[ 0.000000] ACPI: FADT (v001 ATI Bowfin 0x06040000 ATI 0x000f4240) @
0x1be99dac
[ 0.000000] ACPI: SSDT (v001 PTLTD POWERNOW 0x06040000 LTP 0x00000001) @
0x1be99e20
[ 0.000000] ACPI: MADT (v001 PTLTD APIC 0x06040000 LTP 0x00000000) @
0x1be99f56
[ 0.000000] ACPI: MCFG (v001 PTLTD MCFG 0x06040000 LTP 0x00000000) @
0x1be99f9c
[ 0.000000] ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040000 LTP 0x00000001) @
0x1be99fd8
[ 0.000000] ACPI: DSDT (v001 ATI SB460 0x06040000 MSFT 0x02000002) @
0x00000000
[ 0.000000] ATI board detected. Disabling timer routing over 8254.
[ 0.000000] ACPI: PM-Timer IO Port: 0x8008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 15:12 APIC version 16
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 30000000 (gap:
20000000:c0000000)
[ 0.000000] Detected 2200.230 MHz processor.
[ 12.554626] Built 1 zonelists. Total pages: 113427
[ 12.554629] Kernel command line:
root=UUID=d64c9e3b-cb10-49fd-b9f2-cb5b8d728ec1 ro quiet splash locale=es_ES
[ 12.554749] mapped APIC to ffffd000 (fee00000)
[ 12.554751] mapped IOAPIC to ffffc000 (fec00000)
[ 12.554753] Enabling fast FPU save and restore... done.
[ 12.554755] Enabling unmasked SIMD FPU exception support... done.
[ 12.554762] Initializing CPU#0
[ 12.554823] PID hash table entries: 2048 (order: 11, 8192 bytes)
[ 12.555740] Console: colour VGA+ 80x25
[ 12.555933] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 12.556095] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 12.562919] Memory: 442160k/457280k available (1993k kernel code, 14476k
reserved, 900k data, 328k init, 0k highmem)
[ 12.562928] virtual kernel memory layout:
[ 12.562929] fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB)
[ 12.562930] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 12.562931] vmalloc : 0xdc800000 - 0xff7fe000 ( 559 MB)
[ 12.562932] lowmem : 0xc0000000 - 0xdbe90000 ( 446 MB)
[ 12.562933] .init : 0xc03d9000 - 0xc042b000 ( 328 kB)
[ 12.562934] .data : 0xc02f2429 - 0xc03d36d4 ( 900 kB)
[ 12.562935] .text : 0xc0100000 - 0xc02f2429 (1993 kB)
[ 12.562938] Checking if this processor honours the WP bit even in supervisor
mode... Ok.
[ 12.642750] Calibrating delay using timer specific routine.. 4404.58
BogoMIPS (lpj=8809165)
[ 12.642782] Security Framework v1.0.0 initialized
[ 12.642787] SELinux: Disabled at boot.
[ 12.642799] Mount-cache hash table entries: 512
[ 12.642897] CPU: After generic identify, caps: 078bfbff ebd3fbff 00000000
00000000 00002001 00000000 0000001d
[ 12.642904] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64
bytes/line)
[ 12.642906] CPU: L2 Cache: 512K (64 bytes/line)
[ 12.642908] CPU: After all inits, caps: 078bfbff ebd3fbff 00000000 00000410
00002001 00000000 0000001d
[ 12.642916] Compat vDSO mapped to ffffe000.
[ 12.642919] Remapping vsyscall page to ffffe000
[ 12.642926] Checking 'hlt' instruction... OK.
[ 12.658828] SMP alternatives: switching to UP code
[ 12.658955] Freeing SMP alternatives: 11k freed
[ 12.659114] Early unpacking initramfs... done
[ 12.909727] ACPI: Core revision 20060707
[ 12.913068] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found,
using machine DSDT.
[ 13.386134] CPU0: AMD Turion(tm) 64 Mobile Technology MK-38 stepping 02
[ 13.386151] Total of 1 processors activated (4404.58 BogoMIPS).
[ 13.386314] ENABLING IO-APIC IRQs
[ 13.386497] ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
[ 13.533955] Brought up 1 CPUs
[ 13.534124] Booting paravirtualized kernel on bare hardware
[ 13.534204] Time: 2:14:19 Date: 09/14/107
[ 13.534226] NET: Registered protocol family 16
[ 13.534292] EISA bus registered
[ 13.534296] ACPI: bus type pci registered
[ 13.549884] PCI: BIOS BUG #81[49435000] found
[ 13.549930] PCI: Using configuration type 1
[ 13.549931] Setting up standard PCI resources
[ 13.556012] ACPI: Interpreter enabled
[ 13.556015] ACPI: Using IOAPIC for interrupt routing
[ 13.556355] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 13.556358] PCI: Probing PCI hardware (bus 00)
[ 13.557909] Boot video device is 0000:01:05.0
[ 13.558803] PCI: Transparent bridge - 0000:00:14.4
[ 13.558870] PCI: Bus #09 (-#0c) is hidden behind transparent bridge #08
(-#09) (try 'pci=assign-busses')
[ 13.558873] Please report the result to linux-kernel to fix this permanently
[ 13.558909] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 13.561280] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB4_._PRT]
[ 13.561453] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB5_._PRT]
[ 13.561620] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB6_._PRT]
[ 13.561834] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB7_._PRT]
[ 13.562974] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0, disabled.
[ 13.563186] ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled.
[ 13.563397] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0, disabled.
[ 13.563612] ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0, disabled.
[ 13.563822] ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled.
[ 13.564035] ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled.
[ 13.564246] ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled.
[ 13.564456] ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled.
[ 13.564663] ACPI: PCI Interrupt Link [LNKU] (IRQs 3 4 5 7) *0, disabled.
[ 13.585316] ACPI Error (psargs-0355): [\_SB_.PHSR] Namespace lookup failure,
AE_NOT_FOUND
[ 13.585321] ACPI Error (psparse-0537): Method parse/execution failed
[\_SB_.PCI0.LPC0.EC0_._REG] (Node da7fcbd0), AE_NOT_FOUND
[ 13.585383] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[ 13.585606] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[ 13.586042] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 13.586051] pnp: PnP ACPI init
[ 13.588085] pnp: PnP ACPI: found 10 devices
[ 13.588088] PnPBIOS: Disabled by ACPI PNP
[ 13.588126] PCI: Using ACPI for IRQ routing
[ 13.588128] PCI: If a device doesn't work, try "pci=routeirq". If it helps,
post a report
[ 13.588135] PCI: Cannot allocate resource region 7 of bridge 0000:00:05.0
[ 13.588137] PCI: Cannot allocate resource region 8 of bridge 0000:00:05.0
[ 13.588139] PCI: Cannot allocate resource region 7 of bridge 0000:00:06.0
[ 13.588141] PCI: Cannot allocate resource region 8 of bridge 0000:00:06.0
[ 13.588143] PCI: Cannot allocate resource region 7 of bridge 0000:00:07.0
[ 13.588144] PCI: Cannot allocate resource region 8 of bridge 0000:00:07.0
[ 13.588246] NET: Registered protocol family 8
[ 13.588247] NET: Registered protocol family 20
[ 13.588444] pnp: 00:08: ioport range 0x1080-0x1080 has been reserved
[ 13.588446] pnp: 00:08: ioport range 0x220-0x22f has been reserved
[ 13.588646] PCI: Bridge: 0000:00:01.0
[ 13.588649] IO window: 9000-9fff
[ 13.588652] MEM window: d0100000-d01fffff
[ 13.588654] PREFETCH window: d4000000-d7ffffff
[ 13.588657] PCI: Bridge: 0000:00:04.0
[ 13.588658] IO window: disabled.
[ 13.588660] MEM window: d0200000-d02fffff
[ 13.588662] PREFETCH window: disabled.
[ 13.588664] PCI: Bridge: 0000:00:05.0
[ 13.588666] IO window: disabled.
[ 13.588668] MEM window: disabled.
[ 13.588669] PREFETCH window: disabled.
[ 13.588671] PCI: Bridge: 0000:00:06.0
[ 13.588673] IO window: disabled.
[ 13.588675] MEM window: disabled.
[ 13.588676] PREFETCH window: disabled.
[ 13.588679] PCI: Bridge: 0000:00:07.0
[ 13.588680] IO window: disabled.
[ 13.588682] MEM window: disabled.
[ 13.588683] PREFETCH window: disabled.
[ 13.588695] PCI: Bus 9, cardbus bridge: 0000:08:01.0
[ 13.588697] IO window: 0000a400-0000a4ff
[ 13.588702] IO window: 0000a800-0000a8ff
[ 13.588708] PREFETCH window: 30000000-33ffffff
[ 13.588713] MEM window: 38000000-3bffffff
[ 13.588719] PCI: Bridge: 0000:00:14.4
[ 13.588722] IO window: a000-afff
[ 13.588727] MEM window: d0300000-d03fffff
[ 13.588732] PREFETCH window: 30000000-33ffffff
[ 13.588748] PCI: Enabling device 0000:00:04.0 (0000 -> 0002)
[ 13.588752] PCI: Setting latency timer of device 0000:00:04.0 to 64
[ 13.588758] PCI: Setting latency timer of device 0000:00:05.0 to 64
[ 13.588764] PCI: Setting latency timer of device 0000:00:06.0 to 64
[ 13.588770] PCI: Setting latency timer of device 0000:00:07.0 to 64
[ 13.588792] PCI: Enabling device 0000:08:01.0 (0000 -> 0003)
[ 13.588801] ACPI: PCI Interrupt 0000:08:01.0[A] -> GSI 23 (level, low) ->
IRQ 16
[ 13.588828] NET: Registered protocol family 2
[ 13.625894] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 13.625956] TCP established hash table entries: 16384 (order: 5, 131072
bytes)
[ 13.626052] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 13.626100] TCP: Hash tables configured (established 16384 bind 8192)
[ 13.626102] TCP reno registered
[ 13.637911] checking if image is initramfs... it is
[ 14.133906] Freeing initrd memory: 6788k freed
[ 14.134042] Simple Boot Flag at 0x36 set to 0x1
[ 14.134258] audit: initializing netlink socket (disabled)
[ 14.134269] audit(1192328059.192:1): initialized
[ 14.134354] VFS: Disk quotas dquot_6.5.1
[ 14.134369] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 14.134405] io scheduler noop registered
[ 14.134408] io scheduler anticipatory registered
[ 14.134410] io scheduler deadline registered
[ 14.134416] io scheduler cfq registered (default)
[ 14.134609] PCI: Setting latency timer of device 0000:00:04.0 to 64
[ 14.134628] assign_interrupt_mode Found MSI capability
[ 14.134630] Allocate Port Service[0000:00:04.0:pcie00]
[ 14.134656] Allocate Port Service[0000:00:04.0:pcie02]
[ 14.134709] PCI: Setting latency timer of device 0000:00:05.0 to 64
[ 14.134728] assign_interrupt_mode Found MSI capability
[ 14.134730] Allocate Port Service[0000:00:05.0:pcie00]
[ 14.134780] PCI: Setting latency timer of device 0000:00:06.0 to 64
[ 14.134798] assign_interrupt_mode Found MSI capability
[ 14.134800] Allocate Port Service[0000:00:06.0:pcie00]
[ 14.134850] PCI: Setting latency timer of device 0000:00:07.0 to 64
[ 14.134869] assign_interrupt_mode Found MSI capability
[ 14.134870] Allocate Port Service[0000:00:07.0:pcie00]
[ 14.134962] isapnp: Scanning for PnP cards...
[ 14.491074] isapnp: No Plug & Play device found
[ 14.511649] Real Time Clock Driver v1.12ac
[ 14.511688] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing
enabled
[ 14.512240] mice: PS/2 mouse device common for all mice
[ 14.512608] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024
blocksize
[ 14.512774] input: Macintosh mouse button emulation as /class/input/input0
[ 14.512798] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 14.512801] ide: Assuming 33MHz system bus speed for PIO modes; override
with idebus=xx
[ 14.513085] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64
irq 1,12
[ 14.516738] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 14.518762] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 14.518766] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 14.518768] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 14.518770] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 14.518772] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 14.518871] EISA: Probing bus 0 at eisa.0
[ 14.518878] Cannot allocate resource for EISA slot 1
[ 14.518904] Cannot allocate resource for EISA slot 8
[ 14.518906] EISA: Detected 0 cards.
[ 14.548957] TCP cubic registered
[ 14.548963] NET: Registered protocol family 1
[ 14.548981] Using IPI No-Shortcut mode
[ 14.549027] ACPI: (supports S0 S3 S4 S5)
[ 14.549064] Magic number: 11:452:207
[ 14.549104] hash matches device ttyt5
[ 14.549407] Freeing unused kernel memory: 328k freed
[ 14.552971] Time: tsc clocksource has been installed.
[ 14.565944] input: AT Translated Set 2 keyboard as /class/input/input1
[ 15.732044] Capability LSM initialized
[ 15.757566] ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor
Device is not present [20060707]
[ 16.259168] ACPI: EC: acpi_ec_wait timeout, status = 255, expect_event = 2
[ 16.259171] ACPI: EC: input buffer is not empty, aborting transaction
[ 16.259175] ACPI Exception (evregion-0424): AE_TIME, Returned by Handler for
[EmbeddedControl] [20060707]
[ 16.259180] ACPI Exception (dswexec-0458): AE_TIME, While resolving operands
for [OpcodeName unavailable] [20060707]
[ 16.259186] ACPI Error (psparse-0537): Method parse/execution failed
[\_TZ_.THRM._TMP] (Node da7fe928), AE_TIME
[ 16.632052] usbcore: registered new interface driver usbfs
[ 16.632071] usbcore: registered new interface driver hub
[ 16.632088] usbcore: registered new device driver usb
[ 16.632593] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI)
Driver
[ 16.632623] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) ->
IRQ 17
[ 16.632635] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 16.632758] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus
number 1
[ 16.632781] ohci_hcd 0000:00:13.0: irq 17, io mem 0xd0005000
[ 16.698986] usb usb1: configuration #1 chosen from 1 choice
[ 16.699012] hub 1-0:1.0: USB hub found
[ 16.699026] hub 1-0:1.0: 4 ports detected
[ 16.750145] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 16.806725] ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) ->
IRQ 17
[ 16.806741] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 16.806757] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus
number 2
[ 16.806773] ohci_hcd 0000:00:13.1: irq 17, io mem 0xd0006000
[ 16.862673] usb usb2: configuration #1 chosen from 1 choice
[ 16.862695] hub 2-0:1.0: USB hub found
[ 16.862709] hub 2-0:1.0: 4 ports detected
[ 16.966952] ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) ->
IRQ 17
[ 16.966965] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 16.966988] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus
number 3
[ 16.967033] ehci_hcd 0000:00:13.2: irq 17, io mem 0xd0007000
[ 16.967045] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec
2004
[ 16.967132] usb usb3: configuration #1 chosen from 1 choice
[ 16.967151] hub 3-0:1.0: USB hub found
[ 16.967157] hub 3-0:1.0: 8 ports detected
[ 17.078707] SCSI subsystem initialized
[ 17.082308] libata version 2.20 loaded.
[ 17.084966] sata_sil 0000:00:12.0: version 2.2
[ 17.084989] PCI: Enabling device 0000:00:12.0 (0005 -> 0007)
[ 17.084999] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 22 (level, low) ->
IRQ 18
[ 17.085175] ata1: SATA max UDMA/100 cmd 0xdc860080 ctl 0xdc86008a bmdma
0xdc860000 irq 18
[ 17.085202] ata2: SATA max UDMA/100 cmd 0xdc8600c0 ctl 0xdc8600ca bmdma
0xdc860008 irq 18
[ 17.085216] scsi0 : sata_sil
[ 17.553887] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 17.562504] ata1.00: ata_hpa_resize 1: sectors = 234441648, hpa_sectors =
234441648
[ 17.562508] ata1.00: ATA-7: Hitachi HTS541612J9SA00, SBDOC70P, max UDMA/100
[ 17.562511] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 17.574487] ata1.00: ata_hpa_resize 1: sectors = 234441648, hpa_sectors =
234441648
[ 17.574490] ata1.00: configured for UDMA/100
[ 17.574503] scsi1 : sata_sil
[ 17.717688] usb 3-3: new high speed USB device using ehci_hcd and address 3
[ 17.889519] ata2: SATA link down (SStatus 0 SControl 310)
[ 17.889612] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54161 SBDO
PQ: 0 ANSI: 5
[ 17.889993] ATIIXP: IDE controller at PCI slot 0000:00:14.1
[ 17.890010] ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) ->
IRQ 19
[ 17.890019] ATIIXP: chipset revision 128
[ 17.890021] ATIIXP: not 100% native mode: will probe irqs later
[ 17.890030] ide0: BM-DMA at 0x8420-0x8427, BIOS settings: hda:DMA,
hdb:pio
[ 17.890044] ATIIXP: simplex device: DMA disabled
[ 17.890045] ide1: ATIIXP Bus-Master DMA disabled (BIOS)
[ 17.890049] Probing IDE interface ide0...
[ 17.904494] SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB)
[ 17.904505] sda: Write Protect is off
[ 17.904507] sda: Mode Sense: 00 3a 00 00
[ 17.904517] SCSI device sda: write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 17.904561] SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB)
[ 17.904567] sda: Write Protect is off
[ 17.904569] sda: Mode Sense: 00 3a 00 00
[ 17.904579] SCSI device sda: write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 17.904582] sda: sda1 sda2 < sda5 >
[ 17.953090] sd 0:0:0:0: Attached scsi disk sda
[ 17.956346] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 18.114598] usb 3-3: configuration #1 chosen from 1 choice
[ 18.142164] Attempting manual resume
[ 18.142167] swsusp: Resume From Partition 8:5
[ 18.142169] PM: Checking swsusp image.
[ 18.142375] PM: Resume from disk failed.
[ 18.181116] kjournald starting. Commit interval 5 seconds
[ 18.181125] EXT3-fs: mounted filesystem with ordered data mode.
[ 18.428983] usb 1-1: new low speed USB device using ohci_hcd and address 3
[ 18.628059] usb 1-1: configuration #1 chosen from 1 choice
[ 18.629228] hda: Optiarc DVD RW AD-7560A, ATAPI CD/DVD-ROM drive
[ 19.304601] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 19.305320] Probing IDE interface ide1...
[ 19.867677] 8139cp 0000:08:02.0: This (id 10ec:8139 rev 10) is not an 8139C+
compatible chip
[ 19.867681] 8139cp 0000:08:02.0: Try the "8139too" driver instead.
[ 29.143810] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 29.145083] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 29.216944] piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device
[ 29.333671] Linux agpgart interface v0.102 (c) Dave Jones
[ 30.025248] Yenta: CardBus bridge found at 0000:08:01.0 [1025:010f]
[ 30.025278] Yenta: Using CSCINT to route CSC interrupts to PCI
[ 30.025280] Yenta: Routing CardBus interrupts to PCI
[ 30.025286] Yenta TI: socket 0000:08:01.0, mfunc 0x00001202, devctl 0x44
[ 30.100610] 8139too Fast Ethernet driver 0.9.28
[ 30.163676] sdhci: Secure Digital Host Controller Interface driver
[ 30.163679] sdhci: Copyright(c) Pierre Ossman
[ 30.169650] input: PC Speaker as /class/input/input2
[ 30.186851] Linux video capture interface: v2.00
[ 30.261731] Yenta: ISA IRQ mask 0x0ce8, PCI irq 16
[ 30.261736] Socket status: 30000006
[ 30.261739] Yenta: Raising subordinate bus# of parent bus (#08) from #09 to
#0c
[ 30.261744] pcmcia: parent PCI bridge I/O window: 0xa000 - 0xafff
[ 30.261747] cs: IO port probe 0xa000-0xafff: clean.
[ 30.261906] pcmcia: parent PCI bridge Memory window: 0xd0300000 - 0xd03fffff
[ 30.261908] pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x33ffffff
[ 30.262241] ACPI: PCI Interrupt 0000:08:02.0[A] -> GSI 20 (level, low) ->
IRQ 20
[ 30.262896] eth0: RealTek RTL8139 at 0xdc86cc00, 00:1b:24:4c:9b:19, IRQ 20
[ 30.262898] eth0: Identified 8139 chip type 'RTL-8100B/8139D'
[ 30.262913] sdhci: SDHCI controller found at 0000:08:01.2 [1524:0550] (rev
1)
[ 30.262933] ACPI: PCI Interrupt 0000:08:01.2[B] -> GSI 22 (level, low) ->
IRQ 18
[ 30.262993] mmc0: SDHCI at 0xd0301400 irq 18 DMA
[ 30.291530] hda: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache,
UDMA(33)
[ 30.291538] Uniform CD-ROM driver Revision: 3.20
[ 30.292715] usbcore: registered new interface driver hiddev
[ 30.325727] eth0: link down
[ 30.442952] input: PS/2+USB Mouse as /class/input/input3
[ 30.443014] input: USB HID v1.11 Mouse [PS/2+USB Mouse] on
usb-0000:00:13.0-1
[ 30.443027] usbcore: registered new interface driver usbhid
[ 30.443030] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[ 30.508877] uvcvideo: Found UVC 1.00 device USB2.0 Camera (5986:0100)
[ 30.696078] usbcore: registered new interface driver uvcvideo
[ 30.696083] USB Video Class driver (v0.1.0)
[ 30.755522] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1280b1, caps:
0xa04713/0x204000
[ 30.800992] input: SynPS/2 Synaptics TouchPad as /class/input/input4
[ 30.960764] cs: IO port probe 0x100-0x3af: clean.
[ 30.963030] cs: IO port probe 0x3e0-0x4ff: excluding 0x408-0x40f 0x4d0-0x4d7
[ 30.963984] cs: IO port probe 0x820-0x8ff: clean.
[ 30.964848] cs: IO port probe 0xc00-0xcf7: excluding 0xc00-0xc07 0xc10-0xc17
0xc50-0xc57 0xc68-0xc6f 0xcd0-0xcdf
[ 30.965693] cs: IO port probe 0xa00-0xaff: clean.
[ 31.112040] ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) ->
IRQ 19
[ 31.595072] fuse init (API version 7.8)
[ 31.644589] lp: driver loaded but no devices found
[ 31.672809] ndiswrapper version 1.38 loaded (preempt=no,smp=yes)
[ 31.743167] NET: Registered protocol family 17
[ 31.803319] ndiswrapper: driver net5211 (,11/15/2006,5.1.1.9) loaded
[ 31.803558] PCI: Enabling device 0000:02:00.0 (0000 -> 0002)
[ 31.803564] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) ->
IRQ 19
[ 31.803607] ndiswrapper (ZwClose:2467): closing handle 0xd31377e8 not
implemented
[ 31.803754] PCI: Setting latency timer of device 0000:02:00.0 to 64
[ 32.339906] ndiswrapper: using IRQ 19
[ 32.871242] wlan0: ethernet device 00:19:7e:c1:6f:70 using serialized NDIS
driver: net5211, version: 0x50001, NDIS version: 0x501, vendor: 'NDIS Network
Adapter', 168C:001C.5.conf
[ 32.871261] wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2,
WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK
[ 32.881066] usbcore: registered new interface driver ndiswrapper
[ 32.904268] Adding 1309256k swap on
/dev/disk/by-uuid/abc1286d-3bc6-4216-ae46-ea3c4387ce02. Priority:-1 extents:1
across:1309256k
[ 33.079388] EXT3 FS on sda1, internal journal
[ 37.737407] ACPI: EC: acpi_ec_wait timeout, status = 255, expect_event = 2
[ 37.737410] ACPI: EC: input buffer is not empty, aborting transaction
[ 37.737416] ACPI Exception (evregion-0424): AE_TIME, Returned by Handler for
[EmbeddedControl] [20060707]
[ 37.737424] ACPI Exception (dswexec-0458): AE_TIME, While resolving operands
for [OpcodeName unavailable] [20060707]
[ 37.737433] ACPI Error (psparse-0537): Method parse/execution failed
[\_SB_.ACAD._PSR] (Node da7feb58), AE_TIME
[ 37.737472] ACPI Exception (acpi_ac-0096): AE_TIME, Error reading AC Adapter
state [20060707]
[ 37.760183] ACPI: Battery Slot [BAT1] (battery absent)
[ 37.797662] input: Power Button (FF) as /class/input/input5
[ 37.800856] ACPI: Power Button (FF) [PWRF]
[ 37.826245] input: Power Button (CM) as /class/input/input6
[ 37.829414] ACPI: Power Button (CM) [PWRB]
[ 37.856828] input: Lid Switch as /class/input/input7
[ 37.859964] ACPI: Lid Switch [LID]
[ 37.885285] input: Sleep Button (CM) as /class/input/input8
[ 37.888408] ACPI: Sleep Button (CM) [SLPB]
[ 37.901448] No dock devices found.
[ 37.960705] ibm_acpi: ec object not found
[ 37.986424] Using specific hotkey driver
[ 38.076184] pcc_acpi: loading...
[ 38.083598] wmi_add device=da15f000
[ 38.083601] calling WQBA
[ 38.328410] powernow-k8: Found 1 AMD Turion(tm) 64 Mobile Technology MK-38
processors (version 2.00.00)
[ 38.328450] powernow-k8: 0 : fid 0xe (2200 MHz), vid 0xb
[ 38.328452] powernow-k8: 1 : fid 0xc (2000 MHz), vid 0xd
[ 38.328454] powernow-k8: 2 : fid 0xa (1800 MHz), vid 0xf
[ 38.328456] powernow-k8: 3 : fid 0x8 (1600 MHz), vid 0x11
[ 38.328458] powernow-k8: 4 : fid 0x0 (800 MHz), vid 0x18
[ 41.709357] ACPI: EC: acpi_ec_wait timeout, status = 255, expect_event = 2
[ 41.709363] ACPI: EC: input buffer is not empty, aborting transaction
[ 41.709369] ACPI Exception (evregion-0424): AE_TIME, Returned by Handler for
[EmbeddedControl] [20060707]
[ 41.709378] ACPI Exception (dswexec-0458): AE_TIME, While resolving operands
for [OpcodeName unavailable] [20060707]
[ 41.709387] ACPI Error (psparse-0537): Method parse/execution failed
[\_SB_.LID_._LID] (Node da7fe978), AE_TIME
[ 44.000702] ppdev: user-space parallel port driver
[ 44.719218] apm: BIOS not found.
[ 44.915360] Bluetooth: Core ver 2.11
[ 44.915410] NET: Registered protocol family 31
[ 44.915412] Bluetooth: HCI device and connection manager initialized
[ 44.915415] Bluetooth: HCI socket layer initialized
[ 44.949981] Bluetooth: L2CAP ver 2.8
[ 44.949984] Bluetooth: L2CAP socket layer initialized
[ 44.998106] Bluetooth: RFCOMM socket layer initialized
[ 44.998118] Bluetooth: RFCOMM TTY layer initialized
[ 44.998119] Bluetooth: RFCOMM ver 1.8
[ 32.104000] Time: acpi_pm clocksource has been installed.
[ 34.492000] hda-intel: Invalid position buffer, using LPIB read method
instead.
[ 43.256000] NET: Registered protocol family 10
[ 43.256000] lo: Disabled Privacy Extensions
[ 43.256000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 43.256000] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 58.452000] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 72.180000] wlan0: no IPv6 routers present
--
Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are on the CC list for the bug, or are watching someone who is.
More information about the Bugme-new
mailing list