[Bugme-new] [Bug 10913] New: USB stops working after a few mins on my GA-MA78GM-S2H (southbridge AMD SB700)
bugme-daemon at bugzilla.kernel.org
bugme-daemon at bugzilla.kernel.org
Sat Jun 14 22:56:58 PDT 2008
http://bugzilla.kernel.org/show_bug.cgi?id=10913
Summary: USB stops working after a few mins on my GA-MA78GM-S2H
(southbridge AMD SB700)
Product: Drivers
Version: 2.5
KernelVersion: 2.6.25
Platform: All
OS/Version: Linux
Tree: Mainline
Status: NEW
Severity: normal
Priority: P1
Component: USB
AssignedTo: greg at kroah.com
ReportedBy: harrisonmetz at gmail.com
Latest working kernel version:
Earliest failing kernel version:
Distribution: Gentoo (However, this problem happens on a fedora live disk, and
ubuntu live disk as well.)
Hardware Environment: GA-MA78GM-S2H, Phenom 9550, 8GB Ram
Software Environment: Gentoo (gcc 4.2.4)
Problem Description:
On 2.6.24, after about 5 minutes of use, all the USB on my system would stop
working until I restarted by system. In order to continue operating my
computer, I would need a PS2 keyboard. When I did dmesg I saw nothing relating
to the USB thought. At this point, if I plug in a USB device I would see
something like
[code]usb 1-5: new high speed USB device using ehci_hcd and address 10[/code]
But nothing else. After plugging in that single device neither plugging or
unplugging any USB device would generate any message (it was the usb systems
last umph.)
This problem is very repeatable for me. After about 2-10 mins of usage the USB
stops as I've described. I must have done this 20-30 times restarting my
computer, recompiling my kernel, messing with my bios trying to fix it with no
avail.
I decided to upgrade to 2.6.25 and the story is a bit different, after a few
mins the USB stops as well. But if I wait for a few more minutes after that, it
begins to work again (any USB device that was connected when it "stopped"
working will have to be replugged to see it work again). In addition I get a
dmesg output:
[code]
[ 25.940943] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0070009400001fd0]
[ 34.568447] hub 1-4.1:1.0: cannot reset port 1 (err = -110)
[ 35.580393] hub 1-4.1:1.0: cannot reset port 1 (err = -110)
[ 36.593361] hub 1-4.1:1.0: cannot reset port 1 (err = -110)
[ 37.612340] hub 1-4.1:1.0: cannot reset port 1 (err = -110)
[ 38.627827] hub 1-4.1:1.0: cannot reset port 1 (err = -110)
[ 38.627827] hub 1-4.1:1.0: Cannot enable port 1. Maybe the USB cable is
bad?
[ 39.639776] hub 1-4.1:1.0: cannot disable port 1 (err = -110)
[ 40.655231] hub 1-4.1:1.0: cannot reset port 1 (err = -110)
[ 41.667184] hub 1-4.1:1.0: cannot reset port 1 (err = -110)
[ 42.679121] hub 1-4.1:1.0: cannot reset port 1 (err = -110)
[ 43.691073] hub 1-4.1:1.0: cannot reset port 1 (err = -110)
[ 44.706544] hub 1-4.1:1.0: cannot reset port 1 (err = -110)
[ 44.706544] hub 1-4.1:1.0: Cannot enable port 1. Maybe the USB cable is
bad?
[ 45.725600] hub 1-4.1:1.0: cannot disable port 1 (err = -110)
[ 46.737527] hub 1-4.1:1.0: cannot reset port 1 (err = -110)
[ 47.749479] hub 1-4.1:1.0: cannot reset port 1 (err = -110)
[ 48.762416] hub 1-4.1:1.0: cannot reset port 1 (err = -110)
[ 49.774367] hub 1-4.1:1.0: cannot reset port 1 (err = -110)
[ 50.786308] hub 1-4.1:1.0: cannot reset port 1 (err = -110)
[ 50.786308] hub 1-4.1:1.0: Cannot enable port 1. Maybe the USB cable is
bad?
[ 51.799242] hub 1-4.1:1.0: cannot disable port 1 (err = -110)
[ 52.811191] hub 1-4.1:1.0: cannot reset port 1 (err = -110)
[ 53.823119] hub 1-4.1:1.0: cannot reset port 1 (err = -110)
[ 54.838687] hub 1-4.1:1.0: cannot reset port 1 (err = -110)
[ 55.850639] hub 1-4.1:1.0: cannot reset port 1 (err = -110)
[ 56.862565] hub 1-4.1:1.0: cannot reset port 1 (err = -110)
[ 56.862565] hub 1-4.1:1.0: Cannot enable port 1. Maybe the USB cable is
bad?
[ 57.874518] hub 1-4.1:1.0: cannot disable port 1 (err = -110)
[ 58.889975] hub 1-4.1:1.0: cannot disable port 1 (err = -110)
[ 58.889975] scsi 6:0:0:0: Device offlined - not ready after error recovery
[ 58.889975] usb-storage: device scan complete
[ 63.951941] hub 1-4.1:1.0: hub_port_status failed (err = -110)
[ 90.198168] EXT3 FS on sda3, internal journal
[ 90.635213] Adding 2096472k swap on /dev/sda2. Priority:-1 extents:1
across:2096472k
[ 96.258429] r8169: eth0: link up
[ 96.871087] r8169: eth0: link up
[ 97.355614] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 97.355614] ata2.00: irq_stat 0x40000001
[ 97.355614] ata2.00: cmd c8/00:01:00:00:00/00:00:00:00:00/e0 tag 0 dma 512
in
[ 97.355614] res 61/04:01:00:00:00/00:00:00:00:00/e0 Emask 0x1
(device error)
[ 97.355614] ata2.00: status: { DRDY DF ERR }
[ 97.355614] ata2.00: error: { ABRT }
[ 97.356683] ata2.00: configured for UDMA/133 (device error ignored)
[ 97.356683] ata2: EH complete
[ 97.356705] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 97.356705] ata2.00: irq_stat 0x40000001
[ 97.356705] ata2.00: cmd c8/00:01:00:00:00/00:00:00:00:00/e0 tag 0 dma 512
in
[ 97.356705] res 61/04:01:00:00:00/00:00:00:00:00/e0 Emask 0x1
(device error)
[ 97.356705] ata2.00: status: { DRDY DF ERR }
[ 97.356705] ata2.00: error: { ABRT }
[ 97.358318] ata2.00: configured for UDMA/133 (device error ignored)
[ 97.358342] ata2: EH complete
[ 96.891277] sd 1:0:0:0: [sdb] 976771055 512-byte hardware sectors (500107
MB)
[ 97.358598] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 97.358603] ata2.00: irq_stat 0x40000001
[ 97.358613] ata2.00: cmd c8/00:01:00:00:00/00:00:00:00:00/e0 tag 0 dma 512
in
[ 97.358615] res 61/04:01:00:00:00/00:00:00:00:00/e0 Emask 0x1
(device error)
[ 97.358620] ata2.00: status: { DRDY DF ERR }
[ 97.358623] ata2.00: error: { ABRT }
[ 97.361493] ata2.00: configured for UDMA/133 (device error ignored)
[ 97.361493] ata2: EH complete
[ 96.893254] sd 1:0:0:0: [sdb] Write Protect is off
[ 96.893258] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 97.361774] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 97.361774] ata2.00: irq_stat 0x40000001
[ 97.361774] ata2.00: cmd c8/00:01:00:00:00/00:00:00:00:00/e0 tag 0 dma 512
in
[ 97.361774] res 61/04:01:00:00:00/00:00:00:00:00/e0 Emask 0x1
(device error)
[ 97.361774] ata2.00: status: { DRDY DF ERR }
[ 97.361774] ata2.00: error: { ABRT }
[ 97.363646] ata2.00: configured for UDMA/133 (device error ignored)
[ 97.363665] ata2: EH complete
[ 97.363950] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 97.363961] ata2.00: irq_stat 0x40000001
[ 97.363969] ata2.00: cmd c8/00:01:00:00:00/00:00:00:00:00/e0 tag 0 dma 512
in
[ 97.363974] res 61/04:01:00:00:00/00:00:00:00:00/e0 Emask 0x1
(device error)
[ 97.363978] ata2.00: status: { DRDY DF ERR }
[ 97.363982] ata2.00: error: { ABRT }
[ 97.366791] ata2.00: configured for UDMA/133 (device error ignored)
[ 97.366791] ata2: EH complete
[ 96.897518] sd 1:0:0:0: [sdb] Write cache: disabled, read cache: enabled,
doesn't support DPO or FUA
[ 97.366791] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 97.366791] ata2.00: irq_stat 0x40000001
[ 97.366791] ata2.00: cmd c8/00:01:00:00:00/00:00:00:00:00/e0 tag 0 dma 512
in
[ 97.366791] res 61/04:01:00:00:00/00:00:00:00:00/e0 Emask 0x1
(device error)
[ 97.366791] ata2.00: status: { DRDY DF ERR }
[ 97.366791] ata2.00: error: { ABRT }
[ 97.368626] ata2.00: configured for UDMA/133 (device error ignored)
[ 97.368646] sd 1:0:0:0: [sdb] Result: hostbyte=DID_OK
driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 97.368653] sd 1:0:0:0: [sdb] Sense Key : Aborted Command [current]
[descriptor]
[ 97.368660] Descriptor sense data with sense descriptors (in hex):
[ 97.368664] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 97.368677] 00 00 00 00
[ 97.368687] sd 1:0:0:0: [sdb] Add. Sense: No additional sense information
[ 97.368695] end_request: I/O error, dev sdb, sector 0
[ 97.368699] printk: 6 messages suppressed.
[ 97.368704] Buffer I/O error on device sdb, logical block 0
[ 97.368716] ata2: EH complete
[ 96.899588] sd 1:0:0:0: [sdb] 976771055 512-byte hardware sectors (500107
MB)
[ 96.899606] sd 1:0:0:0: [sdb] Write Protect is off
[ 96.899610] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 96.899635] sd 1:0:0:0: [sdb] Write cache: disabled, read cache: enabled,
doesn't support DPO or FUA
[ 96.899659] sd 1:0:0:0: [sdb] 976771055 512-byte hardware sectors (500107
MB)
[ 96.899676] sd 1:0:0:0: [sdb] Write Protect is off
[ 96.899682] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 96.899706] sd 1:0:0:0: [sdb] Write cache: disabled, read cache: enabled,
doesn't support DPO or FUA
[ 97.369760] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 97.369766] ata2.00: irq_stat 0x40000001
[ 97.369777] ata2.00: cmd c8/00:1f:01:00:00/00:00:00:00:00/e0 tag 0 dma 15872
in
[ 97.369786] res 61/04:1f:01:00:00/00:00:00:00:00/e0 Emask 0x1
(device error)
[ 97.369791] ata2.00: status: { DRDY DF ERR }
[ 97.369794] ata2.00: error: { ABRT }
[ 97.372007] ata2.00: configured for UDMA/133 (device error ignored)
[ 97.372007] ata2: EH complete
[ 96.902488] sd 1:0:0:0: [sdb] 976771055 512-byte hardware sectors (500107
MB)
[ 96.902502] sd 1:0:0:0: [sdb] Write Protect is off
[ 96.902505] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 96.902528] sd 1:0:0:0: [sdb] Write cache: disabled, read cache: enabled,
doesn't support DPO or FUA
[ 97.372007] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 97.372007] ata2.00: irq_stat 0x40000001
[ 97.372007] ata2.00: cmd c8/00:1f:01:00:00/00:00:00:00:00/e0 tag 0 dma 15872
in
[ 97.372007] res 61/04:1f:01:00:00/00:00:00:00:00/e0 Emask 0x1
(device error)
[ 97.372007] ata2.00: status: { DRDY DF ERR }
[ 97.372007] ata2.00: error: { ABRT }
[ 97.374684] ata2.00: configured for UDMA/133 (device error ignored)
[ 97.374706] ata2: EH complete
[ 96.904559] sd 1:0:0:0: [sdb] 976771055 512-byte hardware sectors (500107
MB)
[ 96.904573] sd 1:0:0:0: [sdb] Write Protect is off
[ 96.904576] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 96.904600] sd 1:0:0:0: [sdb] Write cache: disabled, read cache: enabled,
doesn't support DPO or FUA
[ 97.375098] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 97.375103] ata2.00: irq_stat 0x40000001
[ 97.375113] ata2.00: cmd c8/00:1f:01:00:00/00:00:00:00:00/e0 tag 0 dma 15872
in
[ 97.375119] res 61/04:1f:01:00:00/00:00:00:00:00/e0 Emask 0x1
(device error)
[ 97.375124] ata2.00: status: { DRDY DF ERR }
[ 97.375127] ata2.00: error: { ABRT }
[ 97.377041] ata2.00: configured for UDMA/133 (device error ignored)
[ 97.377041] ata2: EH complete
[ 96.906666] sd 1:0:0:0: [sdb] 976771055 512-byte hardware sectors (500107
MB)
[ 96.906679] sd 1:0:0:0: [sdb] Write Protect is off
[ 96.906683] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 96.906707] sd 1:0:0:0: [sdb] Write cache: disabled, read cache: enabled,
doesn't support DPO or FUA
[ 97.377114] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 97.377120] ata2.00: irq_stat 0x40000001
[ 97.377127] ata2.00: cmd c8/00:1f:01:00:00/00:00:00:00:00/e0 tag 0 dma 15872
in
[ 97.377137] res 61/04:1f:01:00:00/00:00:00:00:00/e0 Emask 0x1
(device error)
[ 97.377142] ata2.00: status: { DRDY DF ERR }
[ 97.377145] ata2.00: error: { ABRT }
[ 97.381706] ata2.00: configured for UDMA/133 (device error ignored)
[ 97.381706] ata2: EH complete
[ 96.909763] sd 1:0:0:0: [sdb] 976771055 512-byte hardware sectors (500107
MB)
[ 96.909763] sd 1:0:0:0: [sdb] Write Protect is off
[ 96.909763] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 96.909763] sd 1:0:0:0: [sdb] Write cache: disabled, read cache: enabled,
doesn't support DPO or FUA
[ 97.381706] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 97.381706] ata2.00: irq_stat 0x40000001
[ 97.381706] ata2.00: cmd c8/00:1f:01:00:00/00:00:00:00:00/e0 tag 0 dma 15872
in
[ 97.381706] res 61/04:1f:01:00:00/00:00:00:00:00/e0 Emask 0x1
(device error)
[ 97.381706] ata2.00: status: { DRDY DF ERR }
[ 97.381706] ata2.00: error: { ABRT }
[ 97.383805] ata2.00: configured for UDMA/133 (device error ignored)
[ 97.383823] ata2: EH complete
[ 96.911833] sd 1:0:0:0: [sdb] 976771055 512-byte hardware sectors (500107
MB)
[ 96.911846] sd 1:0:0:0: [sdb] Write Protect is off
[ 96.911849] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 96.911874] sd 1:0:0:0: [sdb] Write cache: disabled, read cache: enabled,
doesn't support DPO or FUA
[ 97.384208] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 97.384213] ata2.00: irq_stat 0x40000001
[ 97.384221] ata2.00: cmd c8/00:1f:01:00:00/00:00:00:00:00/e0 tag 0 dma 15872
in
[ 97.384224] res 61/04:1f:01:00:00/00:00:00:00:00/e0 Emask 0x1
(device error)
[ 97.384234] ata2.00: status: { DRDY DF ERR }
[ 97.384237] ata2.00: error: { ABRT }
[ 97.387648] ata2.00: configured for UDMA/133 (device error ignored)
[ 97.387648] sd 1:0:0:0: [sdb] Result: hostbyte=DID_OK
driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 97.387648] sd 1:0:0:0: [sdb] Sense Key : Aborted Command [current]
[descriptor]
[ 97.387648] Descriptor sense data with sense descriptors (in hex):
[ 97.387648] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 97.387648] 00 00 00 01
[ 97.387648] sd 1:0:0:0: [sdb] Add. Sense: No additional sense information
[ 97.387648] end_request: I/O error, dev sdb, sector 1
[ 97.387648] Buffer I/O error on device sdb, logical block 1
[ 97.387648] Buffer I/O error on device sdb, logical block 2
[ 97.387648] Buffer I/O error on device sdb, logical block 3
[ 97.387648] Buffer I/O error on device sdb, logical block 4
[ 97.387648] Buffer I/O error on device sdb, logical block 5
[ 97.387648] Buffer I/O error on device sdb, logical block 6
[ 97.387648] Buffer I/O error on device sdb, logical block 7
[ 97.387648] Buffer I/O error on device sdb, logical block 8
[ 97.387648] Buffer I/O error on device sdb, logical block 9
[ 97.387648] ata2: EH complete
[ 96.915609] sd 1:0:0:0: [sdb] 976771055 512-byte hardware sectors (500107
MB)
[ 96.915629] sd 1:0:0:0: [sdb] Write Protect is off
[ 96.915634] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 96.915660] sd 1:0:0:0: [sdb] Write cache: disabled, read cache: enabled,
doesn't support DPO or FUA
[ 97.388783] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 97.388788] ata2.00: irq_stat 0x40000001
[ 97.388799] ata2.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096
in
[ 97.388802] res 61/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1
(device error)
[ 97.388812] ata2.00: status: { DRDY DF ERR }
[ 97.388815] ata2.00: error: { ABRT }
[ 97.391649] ata2.00: configured for UDMA/133 (device error ignored)
[ 97.391649] ata2: EH complete
[ 96.918529] sd 1:0:0:0: [sdb] 976771055 512-byte hardware sectors (500107
MB)
[ 96.918529] sd 1:0:0:0: [sdb] Write Protect is off
[ 96.918529] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 96.918529] sd 1:0:0:0: [sdb] Write cache: disabled, read cache: enabled,
doesn't support DPO or FUA
[ 97.392473] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 97.392478] ata2.00: irq_stat 0x40000001
[ 97.392485] ata2.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096
in
[ 97.392488] res 61/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1
(device error)
[ 97.392498] ata2.00: status: { DRDY DF ERR }
[ 97.392501] ata2.00: error: { ABRT }
[ 97.395323] ata2.00: configured for UDMA/133 (device error ignored)
[ 97.395344] ata2: EH complete
[ 96.921366] sd 1:0:0:0: [sdb] 976771055 512-byte hardware sectors (500107
MB)
[ 96.921379] sd 1:0:0:0: [sdb] Write Protect is off
[ 96.921385] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 96.921410] sd 1:0:0:0: [sdb] Write cache: disabled, read cache: enabled,
doesn't support DPO or FUA
[ 97.395649] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 97.395649] ata2.00: irq_stat 0x40000001
[ 97.395649] ata2.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096
in
[ 97.395649] res 61/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1
(device error)
[ 97.395649] ata2.00: status: { DRDY DF ERR }
[ 97.395649] ata2.00: error: { ABRT }
[ 97.396834] ata2.00: configured for UDMA/133 (device error ignored)
[ 97.396834] ata2: EH complete
[ 96.923462] sd 1:0:0:0: [sdb] 976771055 512-byte hardware sectors (500107
MB)
[ 96.923462] sd 1:0:0:0: [sdb] Write Protect is off
[ 96.923462] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 96.923462] sd 1:0:0:0: [sdb] Write cache: disabled, read cache: enabled,
doesn't support DPO or FUA
[ 97.398709] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 97.398714] ata2.00: irq_stat 0x40000001
[ 97.398722] ata2.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096
in
[ 97.398728] res 61/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1
(device error)
[ 97.398733] ata2.00: status: { DRDY DF ERR }
[ 97.398736] ata2.00: error: { ABRT }
[ 97.401487] ata2.00: configured for UDMA/133 (device error ignored)
[ 97.401487] ata2: EH complete
[ 96.926266] sd 1:0:0:0: [sdb] 976771055 512-byte hardware sectors (500107
MB)
[ 96.926266] sd 1:0:0:0: [sdb] Write Protect is off
[ 96.926266] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 96.926266] sd 1:0:0:0: [sdb] Write cache: disabled, read cache: enabled,
doesn't support DPO or FUA
[ 97.401487] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 97.401487] ata2.00: irq_stat 0x40000001
[ 97.401487] ata2.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096
in
[ 97.401487] res 61/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1
(device error)
[ 97.401487] ata2.00: status: { DRDY DF ERR }
[ 97.401487] ata2.00: error: { ABRT }
[ 97.402667] ata2.00: configured for UDMA/133 (device error ignored)
[ 97.402667] ata2: EH complete
[ 96.928291] sd 1:0:0:0: [sdb] 976771055 512-byte hardware sectors (500107
MB)
[ 96.928305] sd 1:0:0:0: [sdb] Write Protect is off
[ 96.928308] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 96.928332] sd 1:0:0:0: [sdb] Write cache: disabled, read cache: enabled,
doesn't support DPO or FUA
[ 97.402667] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 97.402667] ata2.00: irq_stat 0x40000001
[ 97.402667] ata2.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096
in
[ 97.402667] res 61/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1
(device error)
[ 97.402667] ata2.00: status: { DRDY DF ERR }
[ 97.402667] ata2.00: error: { ABRT }
[ 97.403845] ata2.00: configured for UDMA/133 (device error ignored)
[ 97.403845] sd 1:0:0:0: [sdb] Result: hostbyte=DID_OK
driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 97.403845] sd 1:0:0:0: [sdb] Sense Key : Aborted Command [current]
[descriptor]
[ 97.403845] Descriptor sense data with sense descriptors (in hex):
[ 97.403845] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 97.403845] 00 00 00 00
[ 97.403845] sd 1:0:0:0: [sdb] Add. Sense: No additional sense information
[ 97.403845] end_request: I/O error, dev sdb, sector 0
[ 97.403845] ata2: EH complete
[ 96.931287] sd 1:0:0:0: [sdb] 976771055 512-byte hardware sectors (500107
MB)
[ 96.931287] sd 1:0:0:0: [sdb] Write Protect is off
[ 96.931287] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 96.931287] sd 1:0:0:0: [sdb] Write cache: disabled, read cache: enabled,
doesn't support DPO or FUA
[ 97.971817] warning: `avahi-daemon' uses 32-bit capabilities (legacy support
in use)
[ 106.354814] eth0: no IPv6 routers present
[ 381.729013] usb 1-4: USB disconnect, address 2
[ 381.729013] usb 1-4.1: USB disconnect, address 3
[ 381.729013] usb 1-4.1.1: USB disconnect, address 4
[ 381.729053] usb 1-4.1.3: USB disconnect, address 5
[ 381.765075] printk: 30 messages suppressed.
[ 381.765075] hald-addon-keyb[5029]: segfault at fffffff8 ip 7f11f2f33d45 sp
7ffffb86e030 error 4 in libc-2.8.so[7f11f2ec2000+13f000]
[ 381.804417] hald-addon-keyb[5032]: segfault at fffffff8 ip 7fab44491d45 sp
7fff4cdca590 error 4 in libc-2.8.so[7fab44420000+13f000]
[ 384.760069] usb 1-4: new high speed USB device using ehci_hcd and address 6
[ 399.923496] usb 1-4: device descriptor read/64, error -110
[ 415.235971] usb 1-4: device descriptor read/64, error -110
[ 415.453428] usb 1-4: new high speed USB device using ehci_hcd and address 7
[ 431.752528] usb 1-4: device descriptor read/64, error -110
[ 447.812077] usb 1-4: device descriptor read/64, error -110
[ 448.036895] usb 1-4: new high speed USB device using ehci_hcd and address 8
[ 458.674246] usb 1-4: device not accepting address 8, error -110
[ 458.788689] usb 1-4: new high speed USB device using ehci_hcd and address 9
[ 469.245505] usb 1-4: device not accepting address 9, error -110
[ 469.245505] hub 1-0:1.0: unable to enumerate USB device on port 4
[ 469.643843] usb 4-1: new full speed USB device using ohci_hcd and address 2
[ 469.800920] usb 4-1: not running at top speed; connect to a high speed hub
[ 469.804889] usb 4-1: configuration #1 chosen from 1 choice
[ 469.806065] hub 4-1:1.0: USB hub found
[ 469.808829] hub 4-1:1.0: 2 ports detected
[ 470.146835] usb 4-1.1: new full speed USB device using ohci_hcd and address
3
[ 470.262890] usb 4-1.1: not running at top speed; connect to a high speed hub
[ 470.266858] usb 4-1.1: configuration #1 chosen from 1 choice
[ 470.268123] hub 4-1.1:1.0: USB hub found
[ 470.270881] hub 4-1.1:1.0: 4 ports detected
[ 470.618359] usb 4-1.1.1: new full speed USB device using ohci_hcd and
address 4
[ 470.750878] usb 4-1.1.1: not running at top speed; connect to a high speed
hub
[ 470.816793] usb 4-1.1.1: configuration #1 chosen from 1 choice
[ 470.818914] scsi7 : SCSI emulation for USB Mass Storage devices
[ 469.026291] usb-storage: device found at 4
[ 469.026291] usb-storage: waiting for device to settle before scanning
[ 471.047745] usb 4-1.1.3: new low speed USB device using ohci_hcd and address
5
[ 471.162051] usb 4-1.1.3: configuration #1 chosen from 1 choice
[ 471.174024] input: Logitech Logitech USB Keyboard as /class/input/input5
[ 471.224682] input: USB HID v1.10 Keyboard [Logitech Logitech USB Keyboard]
on usb-0000:00:12.1-1.1.3
[ 471.241642] input: Logitech Logitech USB Keyboard as /class/input/input6
[ 471.297151] input: USB HID v1.10 Device [Logitech Logitech USB Keyboard] on
usb-0000:00:12.1-1.1.3
[ 475.857380] scsi 7:0:0:0: Direct-Access Generic Flash HS-CF 4.44
PQ: 0 ANSI: 0
[ 475.866793] sd 7:0:0:0: [sdc] Attached SCSI removable disk
[ 475.866863] sd 7:0:0:0: Attached scsi generic sg3 type 0
[ 475.872672] scsi 7:0:0:1: Direct-Access Generic Flash HS-COMBO 4.44
PQ: 0 ANSI: 0
[ 475.932706] sd 7:0:0:1: [sdd] Attached SCSI removable disk
[ 475.932706] sd 7:0:0:1: Attached scsi generic sg4 type 0
[ 475.954944] usb-storage: device scan complete
[ 1293.120242] usb 1-5: new high speed USB device using ehci_hcd and address 10
[ 1308.436853] hub 1-0:1.0: unable to enumerate USB device on port 5
[/code]
(In addition, it looks like my sdb hard drive is having some problems too) I'm
more concerned with the USB at the moment. I know both SATA and USB are on the
SB700 southbridge so I was wondering if it was damaged. (If its actual HW
damage I'll RMA the board and this bug should be marked as invalid.) But the
other southbridge stuff like audio, in addition my my sda hard drive works
fine. Again, I don't know if I have hardware damage or if its a Linux problem
(unfortunately I don't have windows to test with).
In the above example I have both my USB keyboard and USB mouse plugged into my
USB hub on my monitor, but it still fails if I have them directly into the
motherboard's USB. In addition, it doesnt matter what USB port I'm using as
well.
--
Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are on the CC list for the bug, or are watching someone who is.
More information about the Bugme-new
mailing list