[Bugme-new] [Bug 19562] New: Philips SPC 1300NC webcam: unable to enumerate USB device on port X

[bugzilla-daemon at bugzilla.kernel.org]

https://bugzilla.kernel.org/show_bug.cgi?id=19562

               URL: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=59878
                    4
           Summary: Philips SPC 1300NC webcam: unable to enumerate USB
                    device on port X
           Product: v4l-dvb
           Version: unspecified
    Kernel Version: 2.6.36-rc5
          Platform: All
        OS/Version: Linux
              Tree: Mainline
            Status: NEW
          Severity: normal
          Priority: P1
         Component: webcam
        AssignedTo: v4l-dvb_webcam at kernel-bugs.osdl.org
        ReportedBy: wenners at student.ethz.ch
        Regression: No


My Philips SPC 1300NC webcam is not recognised when I plug it in. The kernel
reports "unable to enumerate USB device on port X" in an infinite loop. To get
the webcam running I have to reload the ehci_hcd module. My Logitech webcam
works fine on the same machine. i.e. the USB port is not broken.

System: IBM Thinkpad T42
OS: Debian Squeeze, Kernel: 2.6.36-rc5-686
Original Bug report: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=598784

lsusb:
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

dmesg:
[  378.284388] hub 1-0:1.0: unable to enumerate USB device on port 4
[  378.540147] usb 1-4: new high speed USB device using ehci_hcd and
address 70
[  378.608494] hub 1-0:1.0: unable to enumerate USB device on port 4
[  378.809418] hub 1-0:1.0: unable to enumerate USB device on port 4
[  378.996430] hub 1-0:1.0: unable to enumerate USB device on port 4
[  379.184319] hub 1-0:1.0: unable to enumerate USB device on port 4
[  379.372334] hub 1-0:1.0: unable to enumerate USB device on port 4
[  379.560345] hub 1-0:1.0: unable to enumerate USB device on port 4
[  379.748487] hub 1-0:1.0: unable to enumerate USB device on port 4
[  379.936528] hub 1-0:1.0: unable to enumerate USB device on port 4
[  380.124390] hub 1-0:1.0: unable to enumerate USB device on port 4
[  380.368148] usb 1-4: new high speed USB device using ehci_hcd and
address 79
[  380.436367] hub 1-0:1.0: unable to enumerate USB device on port 4
...

To get it running I have to reload the ehci_hcd module each time I use it:
sudo modprobe -r ehci_hcd

And it works (in Cheese).

lsusb:
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 0471:0331 Philips (or NXP) SPC 1300NC PC Camera
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

dmesg:
[  463.728507] hub 1-0:1.0: unable to enumerate USB device on port 4
[  463.876590] ehci_hcd 0000:00:1d.7: remove, state 1
[  463.876600] usb usb1: USB disconnect, address 1
[  463.928064] hub 1-0:1.0: hub_port_status failed (err = -19)
[  463.928081] hub 1-0:1.0: cannot disable port 4 (err = -19)
[  463.928105] hub 1-0:1.0: cannot reset port 4 (err = -19)
[  463.928116] hub 1-0:1.0: cannot disable port 4 (err = -19)
[  463.928130] hub 1-0:1.0: cannot reset port 4 (err = -19)
[  463.928140] hub 1-0:1.0: cannot disable port 4 (err = -19)
[  463.928155] hub 1-0:1.0: cannot reset port 4 (err = -19)
[  463.928165] hub 1-0:1.0: cannot disable port 4 (err = -19)
[  463.928176] hub 1-0:1.0: unable to enumerate USB device on port 4
[  463.928185] hub 1-0:1.0: cannot disable port 4 (err = -19)
[  463.986359] ehci_hcd 0000:00:1d.7: USB bus 1 deregistered
[  463.986403] ehci_hcd 0000:00:1d.7: PCI INT D disabled
[  464.236062] usb 3-2: new full speed USB device using uhci_hcd and
address 2
[  464.433234] usb 3-2: config 1 has an invalid descriptor of length 7,
skipping remainder of the config
[  464.455227] usb 3-2: New USB device found, idVendor=0471, idProduct=0331
[  464.455238] usb 3-2: New USB device strings: Mfr=2, Product=1,
SerialNumber=0
[  464.455248] usb 3-2: Product: Philips SPC 1300NC Webcam
[  464.455256] usb 3-2: Manufacturer: Philips CE
[  464.455487] usb 3-2: configuration #1 chosen from 1 choice
[  464.716237] 2:3:1 : no or invalid class specific endpoint descriptor
[  464.728897] usbcore: registered new interface driver snd-usb-audio
[  464.793189] Linux video capture interface: v2.00
[  465.038049] uvcvideo: Found UVC 1.00 device Philips SPC 1300NC Webcam
(0471:0331)
[  465.046775] input: Philips SPC 1300NC Webcam as
/devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input11
[  465.047115] usbcore: registered new interface driver uvcvideo
[  465.047900] USB Video Class driver (v0.1.0)

-- 
Configure bugmail: https://bugzilla.kernel.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are on the CC list for the bug.