<div dir="ltr"><div><div><div><div><div><div><div>Hi Daniel,<br><br></div>Thanks for the response.<br></div>I executed after deleting the log folder as you mentioned.<br></div>Please check the log below.<br></div>Any dependencies missing?<br></div>Please check the log and let me know.<br><br></div>Regards,<br></div>Dhinakar<br><div><div><div><div><div><pre id="gmail-out" class="gmail-console-output"><pre>##### doing fuego phase: build ########
Unpacking blobsallad-src.tar.bz2
gcc -g -Wall -I//usr/include -I//usr/include/cairo -I//usr/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT -c bs_main.c
</pre><pre>gcc -g -Wall -I//usr/include -I//usr/include/cairo -I//usr/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT -c bs_vector.c
gcc -g -Wall -I//usr/include -I//usr/include/cairo -I//usr/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT -c bs_pointmass.c
gcc -g -Wall -I//usr/include -I//usr/include/cairo -I//usr/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT -c bs_joint.c
</pre><pre>gcc -g -Wall -I//usr/include -I//usr/include/cairo -I//usr/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT -c bs_stick.c
gcc -g -Wall -I//usr/include -I//usr/include/cairo -I//usr/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT -c bs_env.c
gcc -g -Wall -I//usr/include -I//usr/include/cairo -I//usr/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT -c bs_array.c
gcc -g -Wall -I//usr/include -I//usr/include/cairo -I//usr/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT -c bs_blob.c
gcc -g -Wall -I//usr/include -I//usr/include/cairo -I//usr/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT -c bs_blob_collective.c
gcc -g -Wall -I//usr/include -I//usr/include/cairo -I//usr/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT -c bs_cairo.c
gcc -g -Wall -I//usr/include -I//usr/include/cairo -I//usr/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT -c bs_util.c
gcc -g -Wall -I//usr/include -I//usr/include/cairo -I//usr/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT -c bs_list.c
gcc -g -Wall -I//usr/include -I//usr/include/cairo -I//usr/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT -c bs_octree.c
</pre><pre>bs_octree.c:493:1: warning: 'bs_octree_draw_nodes' defined but not used [-Wunused-function]
bs_octree_draw_nodes(bs_octree_node_t *pNode,
^
gcc -g -Wall -I//usr/include -I//usr/include/cairo -I//usr/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT -c bs_vector_util.c
gcc -g -Wall -I//usr/include -I//usr/include/cairo -I//usr/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT -c bs_profiler.c
gcc -g -Wall -I//usr/include -I//usr/include/cairo -I//usr/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT -c bs_rubberband.c
bs_rubberband.c: In function 'bs_rubberband_create':
bs_rubberband.c:13:20: warning: unused variable 'p' [-Wunused-variable]
bs_int32_t i, j, p;
^
bs_rubberband.c: In function 'bs_rubberband_sc':
bs_rubberband.c:57:20: warning: unused variable 'k' [-Wunused-variable]
bs_int32_t i, j, k;
^
gcc -g -o blobsallad bs_main.o bs_vector.o bs_pointmass.o bs_joint.o bs_stick.o bs_env.o bs_array.o bs_blob.o bs_blob_collective.o bs_cairo.o bs_util.o bs_list.o bs_octree.o bs_vector_util.o bs_profiler.o bs_rubberband.o -Wl,-rpath-link=//usr/lib -L//usr/lib -lcairo -lSDL -lpthread -lm
</pre><pre>Fuego test_build duration=6.51003742218 seconds
##### doing fuego phase: deploy ########
##### doing fuego phase: pre_deploy ########
##### doing fuego phase: test_deploy ########
</pre><pre>Warning: Permanently added '192.168.1.117' (ECDSA) to the list of known hosts.
</pre><pre>Warning: Permanently added '192.168.1.117' (ECDSA) to the list of known hosts.
##### doing fuego phase: post_deploy ########
##### doing fuego phase: run ########
</pre><pre>Warning: Permanently added '192.168.1.117' (ECDSA) to the list of known hosts.
WARNING: test log file parameter empty, so will use default
Warning: Permanently added '192.168.1.117' (ECDSA) to the list of known hosts.
Warning: Permanently added '192.168.1.117' (ECDSA) to the list of known hosts.
</pre><pre>No protocol specified
Can't open display :0
Warning: Permanently added '192.168.1.117' (ECDSA) to the list of known hosts.
</pre><pre>Warning: Permanently added '192.168.1.117' (ECDSA) to the list of known hosts.
##### doing fuego phase: post_test ########
Warning: Permanently added '192.168.1.117' (ECDSA) to the list of known hosts.
Warning: Permanently added '192.168.1.117' (ECDSA) to the list of known hosts.
</pre><pre>Warning: Permanently added '192.168.1.117' (ECDSA) to the list of known hosts.
Warning: Permanently added '192.168.1.117' (ECDSA) to the list of known hosts.
</pre><pre>Warning: Permanently added '192.168.1.117' (ECDSA) to the list of known hosts.
Warning: Permanently added '192.168.1.117' (ECDSA) to the list of known hosts.
</pre><pre>Teardown board link
##### doing fuego phase: processing ########
Going to check 1 fail cases for Ethernet-TRAV-X86-Target.default.Benchmark.blobsallad
No fail cases detected for Ethernet-TRAV-X86-Target.default.Benchmark.blobsallad
running python with PATH=/usr/local/bin:/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games
</pre><pre>Reading current values from /fuego-rw/logs/Benchmark.blobsallad/Ethernet-TRAV-X86-Target.default.5.5/testlog.txt
*** ABORTED ***
Fuego error reason: ERROR: problem while running the parser
Build was aborted
Aborted by <a href="http://localhost:8080/fuego/user/unknown" class="gmail-model-link">unknown</a>
Terminated
[description-setter] Description set: <a href="/fuego/userContent/fuego.logs/Benchmark.blobsallad/Ethernet-TRAV-X86-Target.default.5.5/testlog.txt">log</a>
Finished: ABORTED
</pre></pre></div></div></div></div></div></div><div class="gmail_extra"><br><div class="gmail_quote">On Fri, Jun 23, 2017 at 11:27 AM, Daniel Sangorrin <span dir="ltr"><<a href="mailto:daniel.sangorrin@toshiba.co.jp" target="_blank">daniel.sangorrin@toshiba.co.jp</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">Hi Dhinakar,<br>
<br>
Sorry for the long delay.<br>
<br>
Could you do the following and try again?<br>
<br>
# rm -rf /fuego-rw/logs/Benchmark.<wbr>blobsallad<br>
<span class=""><br>
Thanks,<br>
Daniel<br>
<br>
<br>
> -----Original Message-----<br>
> From: dhinakar k [mailto:<a href="mailto:dhinakar.k@gmail.com">dhinakar.k@gmail.com</a>]<br>
</span><span class="">> Sent: Friday, June 09, 2017 10:48 AM<br>
> To: Daniel Sangorrin<br>
> Cc: <a href="mailto:fuego@lists.linuxfoundation.org">fuego@lists.linuxfoundation.<wbr>org</a><br>
</span><span class="">> Subject: RE: Benchmark.blobsallad test build failing on my x86 64-bit ubuntu pc<br>
><br>
> Fine Daniel, thanks for the response.<br>
><br>
> Regards,<br>
> Dhinakar<br>
><br>
</span><span class="">> On Jun 9, 2017 5:38 AM, "Daniel Sangorrin" <<a href="mailto:daniel.sangorrin@toshiba.co.jp">daniel.sangorrin@toshiba.co.<wbr>jp</a> <mailto:<a href="mailto:daniel.sangorrin@toshiba.co.jp">daniel.sangorrin@<wbr>toshiba.co.jp</a>> > wrote:<br>
><br>
><br>
> Hi Dhinakar,<br>
><br>
</span><span class="">> Sorry for the delay.<br>
> Thanks for reporting. I will look at it when I have time (sorry, I'm busy at the moment).<br>
><br>
> Tim: how should we manage issues/bugs? I can't find the "issues" functionality<br>
> that github provides on bitbucket.<br>
><br>
> Thanks,<br>
> Daniel<br>
><br>
> > -----Original Message-----<br>
</span><span class="">> > From: dhinakar k [mailto:<a href="mailto:dhinakar.k@gmail.com">dhinakar.k@gmail.com</a> <mailto:<a href="mailto:dhinakar.k@gmail.com">dhinakar.k@gmail.com</a>> ]<br>
> > Sent: Tuesday, June 06, 2017 1:52 AM<br>
> > To: Daniel Sangorrin<br>
</span><div><div class="h5">> > Cc: <a href="mailto:fuego@lists.linuxfoundation.org">fuego@lists.linuxfoundation.<wbr>org</a> <mailto:<a href="mailto:fuego@lists.linuxfoundation.org">fuego@lists.<wbr>linuxfoundation.org</a>><br>
> > Subject: Re: Benchmark.blobsallad test build failing on my x86 64-bit ubuntu pc<br>
> ><br>
> > Hi Daniel,<br>
> ><br>
> ><br>
> > It seems the parser has an issue. I posted in another thread about it.<br>
> ><br>
> > But thought of posting the error log here for your reference.<br>
> ><br>
> > Please check and confirm.<br>
> ><br>
> ><br>
> > ##### doing fuego phase: processing ########<br>
> > + processing<br>
> > + local RETURN_VALUE=0<br>
> > + call_if_present test_processing<br>
> > + declare -f -F test_processing<br>
> > + return 0<br>
> > + '[' 0 -ne 0 ']'<br>
> > + fail_check_cases<br>
> > + testlog=/fuego-rw/logs/<wbr>Benchmark.blobsallad/ubuntu-<wbr>x86-target.default.3.3/<wbr>testlog.txt<br>
> > + slog_prefix=/fuego-rw/logs/<wbr>Benchmark.blobsallad/ubuntu-<wbr>x86-target.default.3.3/syslog<br>
> > ++ tr . _<br>
> > ++ echo BENCHMARK.BLOBSALLAD<br>
> > + upName=BENCHMARK_BLOBSALLAD<br>
> > + fcname=BENCHMARK_BLOBSALLAD_<wbr>FAIL_CASE_COUNT<br>
> > + fcc=1<br>
> > + '[' -z 1 ']'<br>
> > + echo 'Going to check 1 fail cases for ubuntu-x86-target.default.<wbr>Benchmark.blobsallad'<br>
> > Going to check 1 fail cases for ubuntu-x86-target.default.<wbr>Benchmark.blobsallad<br>
> > + fcc=0<br>
> > ++ seq 0 0<br>
> > + for n in '$(seq 0 $fcc)'<br>
> > + fpvarname=BENCHMARK_<wbr>BLOBSALLAD_FAIL_REGEXP_0<br>
> > + fpvarmsg=BENCHMARK_BLOBSALLAD_<wbr>FAIL_MESSAGE_0<br>
> > + fpvarslog=BENCHMARK_<wbr>BLOBSALLAD_FAIL_0_SYSLOG<br>
> > + fptemplate='xrandr: command not found'<br>
> > + fpmessage='target system does not have xrandr'<br>
> > + fpslog=<br>
> > + '[' '!' -z '' ']'<br>
> > + grep -e 'xrandr: command not found' /fuego-rw/logs/Benchmark.<wbr>blobsallad/ubuntu-x86-target.<wbr>default.3.3/testlog.txt<br>
> > + echo 'No fail cases detected for ubuntu-x86-target.default.<wbr>Benchmark.blobsallad'<br>
> > No fail cases detected for ubuntu-x86-target.default.<wbr>Benchmark.blobsallad<br>
> > + '[' 0 -ne 0 ']'<br>
> > + syslog_cmp<br>
> > + PREFIX=/fuego-rw/logs/<wbr>Benchmark.blobsallad/ubuntu-<wbr>x86-target.default.3.3/syslog<br>
> > + rc=0<br>
> > + '[' -f /fuego-rw/logs/Benchmark.<wbr>blobsallad/ubuntu-x86-target.<wbr>default.3.3/syslog.before.txt ']'<br>
> > + diff -ua /fuego-rw/logs/Benchmark.<wbr>blobsallad/ubuntu-x86-target.<wbr>default.3.3/syslog.before.txt /fuego-<br>
> > rw/logs/Benchmark.blobsallad/<wbr>ubuntu-x86-target.default.3.3/<wbr>syslog.after.txt<br>
> > + grep -vEf /fuego-core/engine/scripts/<wbr>syslog.ignore<br>
> > + grep -E -e '\.(Bug:|Oops)'<br>
> > + '[' 0 -eq 1 ']'<br>
> > + return 0<br>
> > + '[' 0 -ne 0 ']'<br>
> > + PYTHON_ARGS='-W ignore::DeprecationWarning -W ignore::UserWarning'<br>
> > + '[' -e /fuego-core/engine/tests/<wbr>Benchmark.blobsallad/parser.py ']'<br>
> > + run_python -W ignore::DeprecationWarning -W ignore::UserWarning /fuego-<br>
> core/engine/tests/Benchmark.<wbr>blobsallad/parser.py<br>
> > + '[' '!' -z /usr/local/bin:/usr/local/bin:<wbr>/usr/bin:/bin:/usr/local/<wbr>games:/usr/games ']'<br>
> > + echo 'running python with PATH=/usr/local/bin:/usr/<wbr>local/bin:/usr/bin:/bin:/usr/<wbr>local/games:/usr/games'<br>
> > running python with PATH=/usr/local/bin:/usr/<wbr>local/bin:/usr/bin:/bin:/usr/<wbr>local/games:/usr/games<br>
> > + PATH=/usr/local/bin:/usr/<wbr>local/bin:/usr/bin:/bin:/usr/<wbr>local/games:/usr/games<br>
> > + python -W ignore::DeprecationWarning -W ignore::UserWarning /fuego-<br>
> core/engine/tests/Benchmark.<wbr>blobsallad/parser.py<br>
> > Reading current values from /fuego-rw/logs/Benchmark.<wbr>blobsallad/ubuntu-x86-target.<wbr>default.3.3/testlog.txt<br>
> > + rc=1<br>
> > + '[' 1 -eq 0 ']'<br>
> > + '[' 1 -eq 2 ']'<br>
> > + '[' 1 -eq 3 ']'<br>
> > + abort_job 'ERROR: problem while running the parser'<br>
> > + set +x<br>
> ><br>
> > *** ABORTED ***<br>
> ><br>
> > Fuego error reason: ERROR: problem while running the parser<br>
> ><br>
> > Build step 'Execute shell' marked build as failure<br>
> > [description-setter] Description set: <a href="/fuego/userContent/<wbr>fuego.logs/Benchmark.<wbr>blobsallad/ubuntu-x86-<br>
> > target.default.3.3/testlog.<wbr>txt">log</a><br>
> > Finished: FAILURE<br>
> ><br>
> > Regards,<br>
> > Dhinakar<br>
> ><br>
> > On Fri, May 26, 2017 at 5:43 PM, dhinakar k <<a href="mailto:dhinakar.k@gmail.com">dhinakar.k@gmail.com</a> <mailto:<a href="mailto:dhinakar.k@gmail.com">dhinakar.k@gmail.com</a>><br>
</div></div><span class="">> <mailto:<a href="mailto:dhinakar.k@gmail.com">dhinakar.k@gmail.com</a> <mailto:<a href="mailto:dhinakar.k@gmail.com">dhinakar.k@gmail.com</a>> > > wrote:<br>
> ><br>
> ><br>
> > Sure Daniel I will check and let you know.<br>
> ><br>
> > Regards,<br>
> > Dhinakar<br>
> ><br>
> > On May 26, 2017 6:43 AM, "Daniel Sangorrin" <<a href="mailto:daniel.sangorrin@toshiba.co.jp">daniel.sangorrin@toshiba.co.<wbr>jp</a> <mailto:<a href="mailto:daniel.sangorrin@toshiba.co.jp">daniel.sangorrin@<wbr>toshiba.co.jp</a>><br>
</span>> <mailto:<a href="mailto:daniel.sangorrin@toshiba.co.jp">daniel.sangorrin@<wbr>toshiba.co.jp</a> <mailto:<a href="mailto:daniel.sangorrin@toshiba.co.jp">daniel.sangorrin@<wbr>toshiba.co.jp</a>> > ><br>
<span class="im HOEnZb">> > wrote:<br>
> ><br>
> ><br>
> > Hi Dhinakar,<br>
> ><br>
> > > -----Original Message-----<br>
</span><div class="HOEnZb"><div class="h5">> > > From: dhinakar k [mailto:<a href="mailto:dhinakar.k@gmail.com">dhinakar.k@gmail.com</a> <mailto:<a href="mailto:dhinakar.k@gmail.com">dhinakar.k@gmail.com</a>> <mailto:<a href="mailto:dhinakar.k@gmail.com">dhinakar.k@gmail.com</a><br>
> <mailto:<a href="mailto:dhinakar.k@gmail.com">dhinakar.k@gmail.com</a>> > ]<br>
> > > Sent: Thursday, May 25, 2017 3:56 AM<br>
> > > Yes you are right blobsallad is dependent on sdl, cairo and x11. I installed the following in the docker container as<br>
> > well as on my x86 64-<br>
> > > bit ubuntu host. One question here, for all such tests (functional or benchmark) do I need to install the<br>
> > dependencies in docker as well<br>
> > > as host before the start of the test? Also, how is it done in case of arm based target boards? Should I install the<br>
> > dependencies on the<br>
> > > target board?<br>
> > ><br>
> > > sudo apt-get install libsdl1.2-dev libsdl1.2debian<br>
> > > sudo apt-get install libcairo2-dev<br>
> > > sudo apt-get install x11-xserver-utils<br>
> > ><br>
> > > It got built, deployed and ran successfully (see the results below). But still the test result is a failure. I am not sure<br>
> > why it did not<br>
> > > succeed. May be some problem in plotting. I have pasted the log at the end of this email. Please check and let me<br>
> > know what could be<br>
> > > issue.<br>
> ><br>
> > Thanks for the log. It looks like a bug in the parser (common.py file), maybe one that I fixed on the next branch (see<br>
> > patch "parser: fix bug in the parser").<br>
> > Could you check with the next branch or apply that patch to master and see if it works?<br>
> ><br>
> > Thanks,<br>
> > Daniel<br>
> ><br>
> ><br>
> > ><br>
> > ><br>
> > > Note: Sorry about the html based emails, my official email client seems to be configured that way. I didn't think it<br>
> > was because of that.<br>
> > > Thanks for pointing it out. I will take care of it from now on.<br>
> > ><br>
> > ><br>
> > > Regards,<br>
> > ><br>
> > > Dhinakar<br>
> > ><br>
> > > number of blobs: 2<br>
> > > 2 objects = 19.93 fps<br>
> > > number of blobs: 3<br>
> > > number of blobs: 4<br>
> > > 4 objects = 19.54 fps<br>
> > > number of blobs: 5<br>
> > > number of blobs: 6<br>
> > > number of blobs: 7<br>
> > > number of blobs: 8<br>
> > > 8 objects = 19.78 fps<br>
> > > number of blobs: 9<br>
> > > number of blobs: 10<br>
> > > number of blobs: 11<br>
> > > number of blobs: 12<br>
> > > number of blobs: 13<br>
> > > number of blobs: 14<br>
> > > number of blobs: 15<br>
> > > number of blobs: 16<br>
> > > 16 objects = 18.50 fps<br>
> > > LOG<br>
> > > *****<br>
> > ><br>
> > > ##### doing fuego phase: build ########<br>
> > > gcc -g -Wall -I//usr/include -I//usr/include/cairo -I//usr/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT -c<br>
> > bs_main.c<br>
> > > gcc -g -Wall -I//usr/include -I//usr/include/cairo -I//usr/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT -c<br>
> > bs_vector.c<br>
> > > gcc -g -Wall -I//usr/include -I//usr/include/cairo -I//usr/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT -c<br>
> > bs_pointmass.c<br>
> > > gcc -g -Wall -I//usr/include -I//usr/include/cairo -I//usr/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT -c<br>
> > bs_joint.c<br>
> > > gcc -g -Wall -I//usr/include -I//usr/include/cairo -I//usr/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT -c<br>
> > bs_stick.c<br>
> > > gcc -g -Wall -I//usr/include -I//usr/include/cairo -I//usr/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT -c<br>
> bs_env.c<br>
> > > gcc -g -Wall -I//usr/include -I//usr/include/cairo -I//usr/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT -c<br>
> > bs_array.c<br>
> > > gcc -g -Wall -I//usr/include -I//usr/include/cairo -I//usr/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT -c<br>
> > bs_blob.c<br>
> > > gcc -g -Wall -I//usr/include -I//usr/include/cairo -I//usr/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT -c<br>
> > bs_blob_collective.c<br>
> > > gcc -g -Wall -I//usr/include -I//usr/include/cairo -I//usr/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT -c<br>
> > bs_cairo.c<br>
> > > gcc -g -Wall -I//usr/include -I//usr/include/cairo -I//usr/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT -c bs_util.c<br>
> > > gcc -g -Wall -I//usr/include -I//usr/include/cairo -I//usr/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT -c bs_list.c<br>
> > > gcc -g -Wall -I//usr/include -I//usr/include/cairo -I//usr/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT -c<br>
> > bs_octree.c<br>
> > > bs_octree.c:493:1: warning: 'bs_octree_draw_nodes' defined but not used [-Wunused-function]<br>
> > > bs_octree_draw_nodes(bs_<wbr>octree_node_t *pNode,<br>
> > > ^<br>
> > > gcc -g -Wall -I//usr/include -I//usr/include/cairo -I//usr/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT -c<br>
> > bs_vector_util.c<br>
> > > gcc -g -Wall -I//usr/include -I//usr/include/cairo -I//usr/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT -c<br>
> > bs_profiler.c<br>
> > > gcc -g -Wall -I//usr/include -I//usr/include/cairo -I//usr/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT -c<br>
> > bs_rubberband.c<br>
> > > bs_rubberband.c: In function 'bs_rubberband_create':<br>
> > > bs_rubberband.c:13:20: warning: unused variable 'p' [-Wunused-variable]<br>
> > > bs_int32_t i, j, p;<br>
> > > ^<br>
> > > bs_rubberband.c: In function 'bs_rubberband_sc':<br>
> > > bs_rubberband.c:57:20: warning: unused variable 'k' [-Wunused-variable]<br>
> > > bs_int32_t i, j, k;<br>
> > > ^<br>
> > > gcc -g -o blobsallad bs_main.o bs_vector.o bs_pointmass.o bs_joint.o bs_stick.o bs_env.o bs_array.o bs_blob.o<br>
> > bs_blob_collective.o<br>
> > > bs_cairo.o bs_util.o bs_list.o bs_octree.o bs_vector_util.o bs_profiler.o bs_rubberband.o -Wl,-rpath-link=//usr/lib -<br>
> > L//usr/lib -lcairo -<br>
> > > lSDL -lpthread -lm<br>
> > > Fuego test_build duration=1.58455991745 seconds<br>
> > > ##### doing fuego phase: deploy ########<br>
> > > ##### doing fuego phase: pre_deploy ########<br>
> > > ##### doing fuego phase: test_deploy ########<br>
> > > ##### doing fuego phase: post_deploy ########<br>
> > > ##### doing fuego phase: run ########<br>
> > > WARNING: test log file parameter empty, so will use default<br>
> > > number of blobs: 2<br>
> > > 2 objects = 19.93 fps<br>
> > > number of blobs: 3<br>
> > > number of blobs: 4<br>
> > > 4 objects = 19.54 fps<br>
> > > number of blobs: 5<br>
> > > number of blobs: 6<br>
> > > number of blobs: 7<br>
> > > number of blobs: 8<br>
> > > 8 objects = 19.78 fps<br>
> > > number of blobs: 9<br>
> > > number of blobs: 10<br>
> > > number of blobs: 11<br>
> > > number of blobs: 12<br>
> > > number of blobs: 13<br>
> > > number of blobs: 14<br>
> > > number of blobs: 15<br>
> > > number of blobs: 16<br>
> > > 16 objects = 18.50 fps<br>
> > > ##### doing fuego phases: get_testlog AND processing ########<br>
> > ><br>
> > > RESULT ANALYSIS<br>
> > ><br>
> > > running python with PATH=/usr/local/bin:/usr/<wbr>local/bin:/usr/bin:/bin:/usr/<wbr>local/games:/usr/games<br>
> > > Reading current values from /fuego-rw/logs/Benchmark.<wbr>blobsallad/docker.default.13.<wbr>13/testlog.txt<br>
> > > Test section 8_objects: test result 19.78 satisfies (ge) threshold 1.<br>
> > > Test section 2_objects: test result 19.93 satisfies (ge) threshold 1.<br>
> > > Test section 4_objects: test result 19.54 satisfies (ge) threshold 1.<br>
> > > Test section 16_objects: test result 18.50 satisfies (ge) threshold 1.<br>
> > > Data file /fuego-rw/logs/Benchmark.<wbr>blobsallad/plot.data was updated.<br>
> > > Reading plot data from /fuego-rw/logs/Benchmark.<wbr>blobsallad/plot.data<br>
> > > Traceback (most recent call last):<br>
> > > File "/fuego-core/engine/tests/<wbr>Benchmark.blobsallad/parser.<wbr>py", line 22, in <module><br>
> > > sys.exit(plib.process_data(<wbr>ref_section_pat, cur_dict, 's', 'FPS'))<br>
> > > File "/fuego-core/engine/scripts/<wbr>parser/common.py", line 98, in process_data<br>
> > > create_plot(label)<br>
> > > File "/fuego-core/engine/scripts/<wbr>parser/common.py", line 260, in create_plot<br>
> > > ax.plot(plotrange, test_results_data.get(key).<wbr>split(",")[-bnum:], 'o-', label='Test '+key)<br>
> > > File "/usr/lib/python2.7/dist-<wbr>packages/matplotlib/axes/_<wbr>axes.py", line 1374, in plot<br>
> > > for line in self._get_lines(*args, **kwargs):<br>
> > > File "/usr/lib/python2.7/dist-<wbr>packages/matplotlib/axes/_<wbr>base.py", line 303, in _grab_next_args<br>
> > > for seg in self._plot_args(remaining, kwargs):<br>
> > > File "/usr/lib/python2.7/dist-<wbr>packages/matplotlib/axes/_<wbr>base.py", line 281, in _plot_args<br>
> > > x, y = self._xy_from_xy(x, y)<br>
> > > File "/usr/lib/python2.7/dist-<wbr>packages/matplotlib/axes/_<wbr>base.py", line 223, in _xy_from_xy<br>
> > > raise ValueError("x and y must have same first dimension")<br>
> > > ValueError: x and y must have same first dimension<br>
> > > in signal_handler<br>
> > > ##### doing fuego phase: post_test ########<br>
> > > Going to check 1 fail cases for docker.default.Benchmark.<wbr>blobsallad<br>
> > > Build step 'Execute shell' marked build as failure<br>
> > > [description-setter] Description set: <a<br>
> > > href="/fuego/userContent/<wbr>fuego.logs/Benchmark.<wbr>blobsallad/docker.default.13.<wbr>13/testlog.txt">log</a><br>
> > > Finished: FAILURE<br>
> > ><br>
> > > > -----Original Message-----<br>
> > > > From: <a href="mailto:fuego-bounces@lists.linuxfoundation.org">fuego-bounces@lists.<wbr>linuxfoundation.org</a> <mailto:<a href="mailto:fuego-bounces@lists.linuxfoundation.org">fuego-bounces@lists.<wbr>linuxfoundation.org</a>><br>
> <mailto:<a href="mailto:fuego-bounces@lists.linuxfoundation.org">fuego-bounces@lists.<wbr>linuxfoundation.org</a> <mailto:<a href="mailto:fuego-bounces@lists.linuxfoundation.org">fuego-bounces@lists.<wbr>linuxfoundation.org</a>> ><br>
> > <mailto:<a href="mailto:fuego-bounces@lists.linuxfoundation.org">fuego-bounces@lists.<wbr>linuxfoundation.org</a> <mailto:<a href="mailto:fuego-bounces@lists.linuxfoundation.org">fuego-bounces@lists.<wbr>linuxfoundation.org</a>> <mailto:<a href="mailto:fuego-">fuego-</a><br>
> <a href="mailto:bounces@lists.linuxfoundation.org">bounces@lists.linuxfoundation.<wbr>org</a> <mailto:<a href="mailto:fuego-bounces@lists.linuxfoundation.org">fuego-bounces@lists.<wbr>linuxfoundation.org</a>> > > [mailto:<a href="mailto:fuego-">fuego-</a> <mailto:<a href="mailto:fuego-">fuego-</a>><br>
> > <mailto:<a href="mailto:fuego-">fuego-</a> <mailto:<a href="mailto:fuego-">fuego-</a>> ><br>
> > > <a href="mailto:bounces@lists.linuxfoundation.org">bounces@lists.linuxfoundation.<wbr>org</a> <mailto:<a href="mailto:bounces@lists.linuxfoundation.org">bounces@lists.<wbr>linuxfoundation.org</a>><br>
</div></div><div class="HOEnZb"><div class="h5">> <mailto:<a href="mailto:bounces@lists.linuxfoundation.org">bounces@lists.<wbr>linuxfoundation.org</a> <mailto:<a href="mailto:bounces@lists.linuxfoundation.org">bounces@lists.<wbr>linuxfoundation.org</a>> > <mailto:<a href="mailto:fuego-">fuego-</a> <mailto:<a href="mailto:fuego-">fuego-</a>><br>
> > <a href="mailto:bounces@lists.linuxfoundation.org">bounces@lists.linuxfoundation.<wbr>org</a> <mailto:<a href="mailto:bounces@lists.linuxfoundation.org">bounces@lists.<wbr>linuxfoundation.org</a>> <mailto:<a href="mailto:fuego-">fuego-</a><br>
> <a href="mailto:bounces@lists.linuxfoundation.org">bounces@lists.linuxfoundation.<wbr>org</a> <mailto:<a href="mailto:fuego-bounces@lists.linuxfoundation.org">fuego-bounces@lists.<wbr>linuxfoundation.org</a>> > > ] On Behalf Of Dhinakar<br>
> > > > Kalyanasundaram<br>
> > > > Sent: Wednesday, May 24, 2017 4:20 PM<br>
> > > > Benchmark.blobsallad test build failing on my x86 64-bit ubuntu pc.<br>
> > > ><br>
> > > > Jenkins job console error -> -><br>
> > > ><br>
> > > > /tmp/<wbr>hudson4393205057432627536.sh: line 10: 19407 Killed timeout --signal=9 100m /bin/bash<br>
> > > > $FUEGO_CORE/engine/tests/${<wbr>TESTDIR}/${TESTNAME}.sh<br>
> > > > Build step 'Execute shell' marked build as failure<br>
> > > ><br>
> > > ><br>
> > > ><br>
> > > > Can anyone please let me know if they have executed this test and passed?<br>
> > ><br>
> > > I haven't tried this one yet. From what I see at <a href="https://blobsallad.se/" rel="noreferrer" target="_blank">https://blobsallad.se/</a> it looks<br>
> > > like it probably has dependencies for the SDK such as SDL and Cairo.<br>
> > > Do you have libsdl-dev and libcairo-dev installed?<br>
> > > Since it's graphical you will need a target with X (it's not going to work on docker)<br>
> > > Can you check the build log and send the line that causes the failure?<br>
> > > "> Build step 'Execute shell' marked build as failure" provides no information.<br>
> > ><br>
> > > By the way, could you send your emails in clear text instead of html? Most of your mails<br>
> > > can't be seen on the archive because of that:<br>
> > > <a href="https://lists.linuxfoundation.org/pipermail/fuego/2017-May/000669.html" rel="noreferrer" target="_blank">https://lists.linuxfoundation.<wbr>org/pipermail/fuego/2017-May/<wbr>000669.html</a><br>
> <<a href="https://lists.linuxfoundation.org/pipermail/fuego/2017-May/000669.html" rel="noreferrer" target="_blank">https://lists.<wbr>linuxfoundation.org/pipermail/<wbr>fuego/2017-May/000669.html</a>><br>
> > <<a href="https://lists.linuxfoundation.org/pipermail/fuego/2017-May/000669.html" rel="noreferrer" target="_blank">https://lists.<wbr>linuxfoundation.org/pipermail/<wbr>fuego/2017-May/000669.html</a><br>
> <<a href="https://lists.linuxfoundation.org/pipermail/fuego/2017-May/000669.html" rel="noreferrer" target="_blank">https://lists.<wbr>linuxfoundation.org/pipermail/<wbr>fuego/2017-May/000669.html</a>> ><br>
> > <<a href="https://lists.linuxfoundation.org/pipermail/fuego/2017-" rel="noreferrer" target="_blank">https://lists.<wbr>linuxfoundation.org/pipermail/<wbr>fuego/2017-</a> <<a href="https://lists.linuxfoundation.org/pipermail/fuego/2017-" rel="noreferrer" target="_blank">https://lists.<wbr>linuxfoundation.org/pipermail/<wbr>fuego/2017-</a>><br>
> <<a href="https://lists.linuxfoundation.org/pipermail/fuego/2017-" rel="noreferrer" target="_blank">https://lists.<wbr>linuxfoundation.org/pipermail/<wbr>fuego/2017-</a> <<a href="https://lists.linuxfoundation.org/pipermail/fuego/2017-" rel="noreferrer" target="_blank">https://lists.<wbr>linuxfoundation.org/pipermail/<wbr>fuego/2017-</a>> ><br>
> > > May/000669.html><br>
> > ><br>
> > > Thanks<br>
> > > Daniel<br>
> ><br>
> ><br>
> ><br>
> ><br>
> ><br>
><br>
><br>
><br>
><br>
<br>
<br>
<br>
</div></div></blockquote></div><br></div>