[Openais] I got a problem of ckpt in openais, help me

[Steven Dake]

This sounds more like an IPC problem.

Please make sure you are using openais-0.80.1 since this fixes a few IPC
issues which could result in this issue.

If the issue persists after 0.80.1 let us know and we shall take a look
at finding the problem.

Regards
-steve

On Mon, 2006-09-11 at 10:25 -0500, Muni Bajpai wrote:
> Seems like the default section issue that steve is cuurently working up
> a patch for.
> 
> Shouldn't cause a kernel panic though!!!
> 
> What is the OS, opeanis release ?
> 
> Muni
> -----Original Message-----
> From: Mark Haverkamp [mailto:markh at osdl.org] 
> Sent: Monday, September 11, 2006 10:22 AM
> To: Tiantian Liu
> Cc: Openais List; Bajpai, Muni (RICH1:B670)
> Subject: Re: I got a problem of ckpt in openais, help me
> 
> I am not an expert on the checkpoint service.  I have copied your mail
> to the openais list and to Muni Baipai for comment.
> 
> Mark.
> 
> 
> On Mon, 2006-09-11 at 20:52 +0800, Tiantian Liu wrote:
> > Hi:
> >     Today I tested the ckpt function of the openais. There is a
> > problem.
> >     1 first, I run aisexec on 2 nodes, well done.
> >     2 then, run testckpt on node1. after show some message, the two
> > machine
> >       seem to crash!! they did not response any more(including
> > keyborads)! 
> >       I can not do any thing just reset the machine. the message no
> > node1 is:
> >       
> >       ..............
> >       ..............
> >       PASSED: initial open of checkpoint
> >       FAILED: expected SA_AIS_OK got SA_AIS_ERR_NOT_EXIT: Reading
> > default 
> >        checkpoint section before update
> >        "default_read_buffer:"
> >       FAILED: expected SA_AIS_OK got SA_AIS_ERR_NOT_EXIT: writing
> > default
> >            default checkpoint section with data, updata#1 
> >       FAILED: expected SA_AIS_OK got SA_AIS_ERR_NOT_EXIT: Reading
> > default
> >        checkpoint section
> >        "default_read_buffer:"
> >       PASSED: checkpoint section create
> >       PASSED: checkpoint section expiration set 
> >       Please wait, testing expiry of checkpoint sections
> >       Elapsed Time to expiry is 4.1842(shoule be about 4 seconds)
> >       PASSED: RetentionDurationSet
> >       PASSED: Section creation
> >       PASSED: Unlinking checkpoint 
> >       PASSED: Opening unlinked checkpoint
> >       PASSED: Closing checkpoint
> >       PASSED: open checkpoint read only
> >       PASSED: open after unlink / close
> >       PASSED: Set checkpoint retention duration
> >       PASSED: Get checkpoint status
> >       Memory used 0 in 0 sections
> >       PASSED: create checkpoint section on read only checkpoint  
> >       
> >       machine just stop here, and dose not response any more!! and the
> > node2 crashed too!! 
> > Please tell me what's wrong???
> >       
> >       
> >       then I test amf of openais, as QUICKSTART said, testamf3 and
> > testamf4 
> > should run on node1, but there are not exeutable testamf3 and testamf4
> > created 
> > during compile time! when I compile manually, there were too many
> > error message,
> > they were caused by miss "ais_types.h" and "SaAmf.h" files, which are
> > declared 
> > in testamf3 file. I found "SaAmf.h " is under openais /include
> > directory, but I 
> > can not find "ais_types.h"