[Openais] Corosync cluster stack won't start

[Thomas Guthmann]

Hi Tom,

> heartbeat-libs-3.0.2-2.el5.x86_64.rpm
> heartbeat-3.0.2-2.el5.x86_64.rpm
> openais-1.1.0-1.el5.x86_64.rpm
> openaislib-1.1.0-1.el5.x86_64.rpm

I reckon it could be due to the presence of openais _and_ corosync.
If you want to use corosync you don't need openais. Same than before, 
you don't need heartbeat if you plan to use pacemaker (or the opposite) 
though that shouldn't hurt.

Then, start simple, use a copy of the default corosync.conf in 
/etc/corosync/ and use one ring. It seems you are trying to use an old 
openais configuration which actually could work but to debug correctly 
add your needs one by one (2nd ring, new parameters, etc). Starting with 
the lot is usually more complicated to debug than progressively 
increasing complexity.

Good luck
Thomas.