[agl-discussions] Flounder demo

José Bollo jose.bollo at iot.bzh
Wed Oct 10 13:34:49 UTC 2018


On Wed, 10 Oct 2018 12:10:16 +0000
Marc Murphy <marc.murphy at sancloud.co.uk> wrote:

> Hi Jose,
> 
> 
> Thanks for the systemctl output very helpful.  I get no output from
> the status query.
> 
> 
> I thought I should get the UI on the HDMI output or is it listening
> for a remote connection ?

Yes you should get a UI on HDMI. Why it doesn't work for you I don't
know. Look at weston status. Tune if needed the files in /etc/xdg/weston
But I'm not expert neither of UI part nor of Beagle Bone, so I can not
help much.

try
 $ systemctl status *weston*


Best regards
José
 
> If there is no network adaptor active will it still come up.
> 
> 
> I had to disable the MOST service as I have no MOST onboard.
> 
> 
> Kind Regards
> 
> Marc
> 
> 
> 
> 
> ________________________________
> From: automotive-discussions-bounces at lists.linuxfoundation.org
> <automotive-discussions-bounces at lists.linuxfoundation.org> on behalf
> of José Bollo <jose.bollo at iot.bzh> Sent: 10 October 2018 12:41:45 To:
> automotive-discussions at lists.linuxfoundation.org Subject: Re:
> [agl-discussions] Flounder demo
> 
> On Tue, 9 Oct 2018 21:33:53 +0000
> Marc Murphy <marc.murphy at sancloud.co.uk> wrote:
> 
> > Ok now I have the system booting to a login prompt.
> >
> > The mmcblkp1 issue was a dodgy line in fstab... currently commented
> > out as not needed.
> >
> > Now the question is how to get the app up and running?  
> 
> Hi Marc,
> 
> The log is correct. The audit message are reminder to "work in
> progress" issues. So you should see on the screen what is called the
> "homescreen". It is what is used to start applications.
> 
> If you don't see the homescreen you have to check what's wrong. You
> should start by issuing the following command and check for reported
> errors.
> 
>  $ systemctl status *homescreen* *window*
> 
> I attached the output for my running system.
> 
> Best regards
> José Bollo
> 
> 
> > Bootlog now looks like;
> > [   18.322913] Bluetooth: SCO socket layer initialized
> > [   18.376561] usbcore: registered new interface driver btusb
> > [   18.384646] Bluetooth: hci0: rtl: examining hci_ver=06
> > hci_rev=000b lmp_ver=06 lmp_subver=8723 [   18.393506] Bluetooth:
> > hci0: rtl: loading rtl_bt/rtl8723b_config.bin [   18.400053]
> > bluetooth hci0: Direct firmware load for rtl_bt/rtl8723b_config.bin
> > failed with error -2 [   18.411864] Bluetooth: hci0: Failed to load
> > rtl_bt/rtl8723b_config.bin [   18.419071] Bluetooth: hci0: rtl:
> > loading rtl_bt/rtl8723b_fw.bin [   18.425239] bluetooth hci0: Direct
> > firmware load for rtl_bt/rtl8723b_fw.bin failed with error -2
> > [   18.434097] Bluetooth: hci0: Failed to load
> > rtl_bt/rtl8723b_fw.bin [  OK  ] Listening on Load/Save RF Kill
> > Switch Status /dev/rfkill Watch. [  OK  ] Reached target Sockets.
> > [  OK  ] Reached target Basic System. Starting neard service...
> > Starting Save/Restore Sound Card State... Starting Modem Manager...
> >          Starting Telephony service...
> > [  OK  ] Started D-Bus System Message Bus.
> > [   20.410229] nfc: nfc_init: NFC Core ver 0.1
> > [   20.431933] NET: Registered protocol family 39
> > [  OK  ] Started neard service.
> > [  OK  ] Started Telephony service.
> >          Starting Connection service...
> > [  OK  ] Started Hardware RNG Entropy Gatherer Daemon.
> > [   20.620554] random: crng init done
> >          Starting Start the security manager...
> >          Starting Driver configuration for Unicens2...
> >          Starting Initiate afm-system-setup...
> > [  OK  ] Started System Logging Service.
> >          Starting Login Service...
> >          Starting Terminate Psplash Boot Screen...
> > [  OK  ] Started Kernel Logging Service.
> >          Starting Bluetooth service...
> > [  OK  ] Reached target Containers.
> >          Starting Disk Manager (legacy version)...
> >          Starting Avahi mDNS/DNS-SD Stack...
> > [  OK  ] Reached target cynara sockets.
> >          Starting Cynara service...
> > [  OK  ] Started Network Service.
> > [  OK  ] Started Start the security manager.
> > [  OK  ] Started Save/Restore Sound Card State.
> > [FAILED] Failed to start Driver configuration for Unicens2.
> > See 'systemctl status unicens-config.service' for details.
> > [  OK  ] Started Terminate Psplash Boot Screen.
> > [   21.627164] net eth0: initializing cpsw version 1.12 (0)
> > [   21.695256] cpsw 4a100000.ethernet: initialized cpsw ale version
> > 1.4 [   21.701658] cpsw 4a100000.ethernet: ALE Table size 1024
> > [   21.714221] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
> > [   21.714227] Bluetooth: BNEP filters: protocol multicast
> > [   21.714249] Bluetooth: BNEP socket layer initialized
> > [  OK  ] Started Connection service.
> > [  OK  ] Started Cynara service.
> > [   21.963003] Atheros 8035 ethernet 4a101000.mdio:00: attached PHY
> > driver [Atheros 8035 ethernet] (mii_bus:phy_addr=4a101000.mdio:00,
> > irq=-1) [   21.995379] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not
> > ready [  OK  ] Started Bluetooth service. [  OK  ] Started Avahi
> > mDNS/DNS-SD Stack. [  OK  ] Started Disk Manager (legacy version).
> > [  OK  ] Started Login Service.
> > [  OK  ] Started Automount Disk Manager.
> > [  OK  ] Reached target Bluetooth.
> > [  OK  ] Started Bluetooth Audio ALSA Backend.
> >          Starting Hostname Service...
> >          Starting WPA supplicant...
> >          Starting Authorization Manager...
> >          Starting Load/Save RF Kill Switch Status...
> > [  OK  ] Reached target Sound Card.
> > [  OK  ] Started Initiate afm-system-setup.
> >          Starting Weston Wayland Compositor...
> > [  OK  ] Started Application Framework Master, system side.
> > [  OK  ] Started Load/Save RF Kill Switch Status.
> > [  OK  ] Started WPA supplicant.
> > [  OK  ] Reached target Network.
> >          Starting Permit User Sessions...
> >          Starting Berkeley Internet Name Domain (DNS)...
> > [  OK  ] Started Hostname Service.
> > [  OK  ] Started Permit User Sessions.
> > [  OK  ] Started Serial Getty on ttyS0.
> > [  OK  ] Reached target Login Prompts.
> > [  OK  ] Started Initiate afm-user-session 0.
> > [   23.816423] audit: type=1006 audit(1539033327.180:2): pid=434
> > uid=0 subj=System old-auid=4294967295 auid=0 tty=(none)
> > old-ses=4294967295 ses=1 res=1 [  OK  ] Started Authorization
> > Manager. [  OK  ] Created slice User Slice of root. Starting User
> > Manager for UID 0... [  OK  ] Started Session 1 of user root.
> > [   24.722806] audit: type=1006 audit(1539033328.090:3): pid=445
> > uid=0 subj=System old-auid=4294967295 auid=0 tty=(none)
> > old-ses=4294967295 ses=2 res=1 [   24.849378] audit: type=1400
> > audit(1539033328.210:4): lsm=SMACK fn=smack_key_permission
> > action=denied subject="System" object="_" requested=w pid=445
> > comm="(systemd)" key_serial=450447809
> > key_desc="_uid.0" [   24.920244] audit: type=1400
> > audit(1539033328.280:5): lsm=SMACK fn=smack_inode_permission
> > action=denied subject="System" object="_" requested=w pid=437
> > comm="named" name="bind" dev="mmcblk0p2" ino=27178 [   24.920326]
> > audit: type=1300 audit(1539033328.280:5): arch=40000028 syscall=33
> > per=800000 success=no exit=-13 a0=48dfdc a1=2 a2=558f2b00
> > a3=558f2b00 items=0 ppid=432 pid=437 auid=4294967295 uid=987
> > gid=987 euid=987 suid=987 fsuid=987 egid=987 sgid=987 fsgid=987
> > tty=(none) ses=4294967295 comm="named" exe="/usr/sbin/named"
> > subj=System key=(null) [   24.920384] audit: type=1327
> > audit(1539033328.280:5):
> > proctitle=2F7573722F7362696E2F6E616D6564002D750062696E64 [  OK  ]
> > Started Modem Manager. [   25.477327] audit: type=1300
> > audit(1539033328.210:4): arch=40000028 syscall=311 per=800000
> > success=no exit=-13 a0=8 a1=fffffffc a2=fffffffd a3=0 items=0
> > ppid=1 pid=445 auid=0 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0
> > sgid=0 fsgid=0 tty=(none) ses=2 comm="(systemd)"
> > exe="/lib/systemd/systemd" subj=System key=(null) [  OK  ] Started
> > Weston Wayland Compositor. [   25.698196] audit: type=1327
> > audit(1539033328.210:4): proctitle="(systemd)" [  OK  ] Started
> > Berkeley Internet Name Domain (DNS). [  OK  ] Reached target Host
> > and Network Name Lookups. [  OK  ] Reached target Multi-User
> > System. Starting Update UTMP about System Runlevel Changes...
> > [   26.163550] cpsw 4a100000.ethernet eth0: Link is Up - 1Gbps/Full
> > - flow control rx/tx [   26.171500] IPv6: ADDRCONF(NETDEV_CHANGE):
> > eth0: link becomes ready [  OK  ] Started Update UTMP about System
> > Runlevel Changes. [   26.353379] 8021q: 802.1Q VLAN Support v1.8
> > [   26.380143] 8021q: adding VLAN 0 to HW filter on device eth0
> >
> > Automotive Grade Linux 6.0.0 beaglebone ttyS0
> >
> >
> > Thanks
> > Marc
> >
> >
> > From: automotive-discussions-bounces at lists.linuxfoundation.org
> > [mailto:automotive-discussions-bounces at lists.linuxfoundation.org] On
> > Behalf Of Marc Murphy Sent: 09 October 2018 10:40 To:
> > automotive-discussions at lists.linuxfoundation.org Subject:
> > [agl-discussions] Flounder demo
> >
> > Hello All
> > I have managed to get a build of Flounder booting on our BBE board
> > (based on a beaglebone black) and would like to know if there are
> > any setup requirements to get the demo application to launch.
> >
> > On boot most services seem to start, we get the psplash screen and
> > some messages scrolling on the progress bar.  Watson application
> > doesn't seem to be started.  Is there a filesystem or hardware
> > requirement for it to start?
> >
> > Last part of the boot log causes the system to go into recovery
> > mode;
> >
> > [  OK  ] Listening on Load/Save RF Kill Switch Status /dev/rfkill
> > Watch. Starting Load/Save RF Kill Switch Status...
> > [  OK  ] Started Load/Save RF Kill Switch Status.
> > [***   ] A start job is running for dev-mmcblkp1.device (33s / 1min
> > 30s)[   37.322585] random: crng init done [ TIME ] Timed out waiting
> > for device dev-mmcblkp1.device. [DEPEND] Dependency failed
> > for /boot. [DEPEND] Dependency failed for Local File Systems.
> > [  OK  ] Closed Syslog Socket.
> > [  OK  ] Reached target Login Prompts.
> >          Starting Network Service...
> > [  OK  ] Reached target Host and Network Name Lookups.
> > [  OK  ] Reached target Bluetooth.
> > [  OK  ] Reached target Sound Card.
> > [  OK  ] Reached target cynara sockets.
> > [  OK  ] Reached target Sockets.
> >          Starting Rebuild Journal Catalog...
> >          Starting Rebuild Dynamic Linker Cache...
> > [  OK  ] Started Emergency Shell.
> >          Starting Create Volatile Files and Directories...
> > [  OK  ] Reached target Emergency Mode.
> > [  OK  ] Reached target Timers.
> > [  OK  ] Started Network Service.
> > [  OK  ] Started Rebuild Journal Catalog.
> > [  OK  ] Reached target Network.
> > [  OK  ] Started Create Volatile Files and Directories.
> >          Starting Update UTMP about System Boot/Shutdown...
> > [  OK  ] Started Rebuild Dynamic Linker Cache.
> > [  OK  ] Started Update UTMP about System Boot/Shutdown.
> >          Starting Update UTMP about System Runlevel Changes...
> >          Starting Update is Completed...
> > [  OK  ] Started Update is Completed.
> > [  OK  ] Started Update UTMP about System Runlevel Changes.
> > You are in emergency mode. After logging in, type "journalctl -xb"
> > to view system logs, "systemctl reboot" to reboot, "systemctl
> > default" or ^D to boot into default mode.
> > Press Enter for maintenance
> > (or press Control-D to continue):
> >
> >
> > Wondering why it would be waiting for dev-mmcblkp1.device. and what
> > is supposed to be on it ?
> >
> > Kind Regards
> > Marc  
> 



More information about the automotive-discussions mailing list