[bitcoin-dev] Fill-or-kill transaction

Btc Drak btcdrak at gmail.com
Thu Sep 17 19:12:08 UTC 2015


Forgive me if I have missed the exact use-case, but this seems overly
complex. Surely fill-or-kill refers to getting a transaction confirmed
within a few confirms or to drop the tx from the mempool so it wont be
considered for inclusion anymore. As such, you could just repurpose a small
range of nLocktime such that a TX will be accepted into mempool for a
specific period before expiring.

On Thu, Sep 17, 2015 at 7:41 PM, jl2012 via bitcoin-dev <
bitcoin-dev at lists.linuxfoundation.org> wrote:

> Fill-or-kill tx is not a new idea and is discussed in the Scaling Bitcoin
> workshop. In Satoshi's implementation of nLockTime, a huge range of
> timestamp (from 1970 to 2009) is wasted. By exploiting this unused range
> and with compromise in the time resolution, a fill-or-kill system could be
> built with a softfork.
>
> -----------
> Two new parameters, nLockTime2 and nKillTime are defined:
>
> nLockTime2 (Range: 0-1,853,010)
> 0: Tx could be confirmed at or after block 420,000
> 1: Tx could be confirmed at or after block 420,004
> .
> .
> 719,999: Tx could be confirmed at or after block 3,299,996 (about 55 years
> from now)
> 720,000: Tx could be confirmed if the median time-past >= 1,474,562,048
> (2016-09-22)
> 720,001: Tx could be confirmed if the median time-past >= 1,474,564,096
> (2016-09-22)
> .
> .
> 1,853,010 (max): Tx could be confirmed if the median time-past >=
> 3,794,966,528 (2090-04-04)
>
> nKillTime (Range: 0-2047)
> if nLockTime2 < 720,000, the tx could be confirmed at or before block
> (nLockTime2 + nKillTime * 4)
> if nLockTime2 >= 720,000, the tx could be confirmed if the median
> time-past <= (nLockTime2 - 720,001 + nKillTime) * 2048
>
> Finally, nLockTime = 500,000,000 + nKillTime + nLockTime2 * 2048
>
> Setting a bit flag in tx nVersion will activate the new rules.
>
> The resolution is 4 blocks or 2048s (34m)
> The maximum confirmation window is 8188 blocks (56.9 days) or 16,769,024s
> (48.5 days)
>
> For example:
> With nLockTime2 = 20 and nKillTime = 100, a tx could be confirmed only
> between block 420,080 and 420,480
> With nLockTime2 = 730,000 and nKillTime = 1000, a tx could be confirmed
> only between median time-past of 1,495,042,048 and 1,497,090,048
>
> ----------------
> Why is this a softfork?
>
> Remember this formula: nLockTime = 500,000,000 + nKillTime + nLockTime2 *
> 2048
>
> For height based nLockTime2 (<= 719,999)
>
> For nLockTime2 = 0 and nKillTime = 0, nLockTime = 500,000,000, which means
> the tx could be confirmed after 1970-01-01 with the original lock time
> rule. As the new rule does not allow confirmation until block 420,000, it's
> clearly a softfork.
>
> It is not difficult to see that the growth of nLockTime will never catch
> up nLockTime2.
>
> At nLockTime2 = 719,999 and nKillTime = 2047, nLockTime = 1,974,559,999,
> which means 2016-09-22. However, the new rule will not allow confirmation
> until block 3,299,996 which is decades to go
>
>
>
> For time based nLockTime2 (> 720,000)
>
> For nLockTime2 = 720,000 and nKillTime = 0, nLockTime = 1,974,560,000,
> which means the tx could be confirmed after median time-past 1,474,560,000
> (assuming BIP113). However, the new rule will not allow confirmation until
> 1,474,562,048, therefore a soft fork.
>
> For nLockTime2 = 720,000 and nKillTime = 2047, nLockTime = 1,974,562,047,
> which could be confirmed at 1,474,562,047. Again, the new rule will not
> allow confirmation until 1,474,562,048. The 1 second difference makes it a
> soft fork.
>
> Actually, for every nLockTime2 value >= 720,000, the lock time with the
> new rule must be 1-2048 seconds later than the original rule.
>
> For nLockTime2 = 1,853,010 and nKillTime = 2047, nLockTime =
> 4,294,966,527, which is the highest possible value with the 32-bit nLockTime
>
> ----------------
> User's perspective:
>
> A user wants his tx either filled or killed in about 3 hours. He will set
> a time-based nLockTime2 according to the current median time-past, and set
> nKillTime = 5
>
> A user wants his tx get confirmed in the block 630000, the first block
> with reward below 10BTC. He is willing to pay high fee but don't want it
> gets into another block. He will set nLockTime2 = 210,000 and nKillTime = 0
>
> ----------------
> OP_CLTV
>
> Time-based OP_CLTV could be upgraded to support time-based nLockTime2.
> However, height-based OP_CLTV is not compatible with nLockTime2. To spend a
> height-based OP_CLTV output, user must use the original nLockTime.
>
> We may need a new OP_CLTV2 which could verify both nLockTime and nLockTime2
>
> ----------------
> 55 years after?
>
> The height-based nLockTime2 will overflow in 55 years. It is very likely a
> hard fork will happen to implement a better fill-or-kill system. If not, we
> could reboot everything with another tx nVersion for another 55 years.
>
>
> _______________________________________________
> bitcoin-dev mailing list
> bitcoin-dev at lists.linuxfoundation.org
> https://lists.linuxfoundation.org/mailman/listinfo/bitcoin-dev
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.linuxfoundation.org/pipermail/bitcoin-dev/attachments/20150917/13bdb4db/attachment.html>


More information about the bitcoin-dev mailing list