[bitcoin-dev] Exploring: limiting transaction output amount as a function of total input value

Billy Tetrud billy.tetrud at gmail.com
Tue Aug 10 00:41:12 UTC 2021


>  By explicitly specifying the start and end block of an epoch, the user
has more flexibility in shifting the epoch

Ok I see. I think I understand your proposal better now. If the output is
spent within the range epochStart - epochEnd, the limit holds, if it is
spent outside that range the change output must also have a range of the
same length (or shorter?). So you want there to be the ability for the user
to precisely define the length and starting block of the
rate-limiting-period (epoch). I'd say it'd be clearer to specify the window
length and the starting block in that case. The same semantics can be kept.

> This would require the system to bookkeep how much was spent since the
first rate-limited output

Yes, for the length of the epoch, after which the bookkeeping can be
discarded/reset until a new transaction is sent. Your proposal also
requires bookkeeping tho - it needs to store the 'remain' value with the
UTXO as well because its not efficient to go back and re-execute the script
just to grab that value.

> using an address as input for a transaction will always spends the full
amount at that address

Using a UTXO will spend the full UTXO. The address may contain many UTXOs.
I'm not suggesting that a change address isn't needed - I'm suggesting that
the *same* address be used as the change address for the change output. Eg
consider the following UTXO info:

Address X: rateLimit(windowSize = 144 blocks, limit = 100k sats)
* UTXO 1: 100k sats, 50k spent by ancestor inputs since epochStart 800100
* UTXO 2: 200k sats, 10k spent since epochStart

When sending a transaction using UTXO 2, a node would look up the list of
UTXOs in Address X, add up the amount spent since epochStart (60k) and
ensure that at most 40k is going to an address that isn't address X. So a
valid transaction might look like:

Input: UTXO 2
Output 1: 30k -> Address A
Output 2: 170k -> Address X

On Thu, Aug 5, 2021 at 7:22 AM Zac Greenwood <zachgrw at gmail.com> wrote:

> Hi Billy,
>
> > It sounds like you're proposing an opcode
>
> No. I don’t have enough knowledge of Bitcoin to be able to tell how (and
> if) rate-limiting can be implemented as I suggested. I am not able to
> reason about opcodes, so I kept my description at a more functional level.
>
> > I still don't understand why its useful to specify those as absolute
> block heights
>
> I feel that this a rather uninteresting data representation aspect that’s
> not worth going back and forth about. Sure, specifying the length of the
> epoch may also be an option, although at the price of giving up some
> functionality, and without much if any gains.
>
> By explicitly specifying the start and end block of an epoch, the user has
> more flexibility in shifting the epoch (using alternate values for
> epochStart and epochEnd) and simultaneously increasing the length of an
> epoch. These seem rather exotic features, but there’s no harm in retaining
> them.
>
> > if you have a UTXO encumbered by rateLimit(epochStart = 800100,
> epochEnd = 800200, limit = 100k, remain = 100k), what happens if you don't
> spend that UTXO before block 800200?
>
> The rate limit remains in place. So if this UTXO is spent in block 900000,
> then at most 100k may be spent. Also, the new epoch must be at least 100
> blocks and remain must correctly account for the actual amount spent.
>
> > This is how I'd imagine creating an opcode like this:
>
> > rateLimit(windowSize = 144 blocks, limit = 100k sats)
>
> This would require the system to bookkeep how much was spent since the
> first rate-limited output. It is a more intuitive way of rate-limiting but
> it may be much more difficult to implement, which is why I went with the
> epoch-based rate limiting solution. In terms of functionality, I believe
> the two solutions are nearly identical for all practical purposes.
>
> Your next section confuses me. As I understand it, using an address as
> input for a transaction will always spends the full amount at that address.
> That’s why change addresses are required, no? If Bitcoin were able to pay
> exact amounts then there wouldn’t be any need for change outputs.
>
> Zac
>
>
> On Thu, 5 Aug 2021 at 08:39, Billy Tetrud <billy.tetrud at gmail.com> wrote:
>
>> >   A maximum amount is allowed to be spent within EVERY epoch.
>>
>> It sounds like you're proposing an opcode that takes in epochStart and
>> epochEnd as parameters. I still don't understand why its useful to specify
>> those as absolute block heights. You mentioned that this enables more
>> straightforward validation logic, but I don't see how. Eg, if you have a
>> UTXO encumbered by rateLimit(epochStart = 800100, epochEnd = 800200, limit
>> = 100k, remain = 100k), what happens if you don't spend that UTXO before
>> block 800200? Is the output no longer rate limited then? Or is the opcode
>> calculating 800200-800100 = 100 and applying a rate limit for the next
>> epoch? If the first, then the UTXO must be spent within one epoch to remain
>> rate limited. If the second, then it seems nearly identical to simply
>> specifying window=100 as a parameter instead of epochStart and epochEnd.
>>
>> > then there must be only a single (rate-limited) output
>>
>> This rule would make transactions tricky if you're sending money into
>> someone else's wallet that may be rate limited. If the requirement is that
>> only you yourself can send money into a rate limited wallet, then this
>> point is moot but it would be ideal to not have such a requirement.
>>
>> This is how I'd imagine creating an opcode like this:
>>
>> rateLimit(windowSize = 144 blocks, limit = 100k sats)
>>
>> This would define that the epoch is 1 day's worth of blocks. This would
>> evenly divide bitcoin's retarget period and so each window would start and
>> end at those dividing lines (eg the first 144 blocks of the retargetting
>> period, then the second, then the third, etc).
>>
>> When this output is spent, it ensures that there's a maximum of 100k sats
>> is sent to addresses other than the originating address. It also records
>> the amount spent in the current 144 block window for that address (eg by
>> simply recording the already-spent amount on the resulting UTXO and having
>> an index that allows looking up UTXOs by address and adding them up). That
>> way, when any output from that address is spent again, if a new 144 block
>> window has started, the limit is reset, but if its still within the same
>> window, the already-spent amounts for UTXOs from that address are added up
>> and subtracted from the limit, and that number is the remaining limit a
>> subsequent transaction needs to adhere to.
>>
>> This way, 3rd party could send transactions into an address like this,
>> and multiple outputs can be combined and used to spend to arbitrary outputs
>> (up to the rate limit of course).
>>
>> On Wed, Aug 4, 2021 at 3:48 AM Zac Greenwood <zachgrw at gmail.com> wrote:
>>
>>> > Ah I see, this is all limited to within a single epoch.
>>>
>>> No, that wouldn't be useful. A maximum amount is allowed to be spent
>>> within EVERY epoch.
>>>
>>> Consider an epoch length of 100 blocks with a spend limit of 200k per
>>> epoch. The following is allowed:
>>>
>>> epoch1 (800101 - 800200): spend 120k in block 800140. Remaining for
>>> epoch1: 80k;
>>> epoch1 (800101 - 800200): spend another 60k in block 800195. Remaining
>>> for epoch1: 20k;
>>> epoch2 (800201 - 800300): spend 160k in block 800201. Remaining for
>>> epoch2: 40k.
>>>
>>> Since the limit pertains to each individual epoch, it is allowed to
>>> spend up to the full limit at the start of any new epoch. In this example,
>>> the spending was as follows:
>>>
>>> 800140: 120k
>>> 800195: 60k
>>> 800201: 160k.
>>>
>>> Note that in a span of 62 blocks a total of 340k sats was spent. This
>>> may seem to violate the 200k limit per 100 blocks, but this is the result
>>> of using a per-epoch limit. This allows a maximum of 400k to be spent in 2
>>> blocks llke so: 200k in the last block of an epoch and another 200k in the
>>> first block of the next epoch. However this is inconsequential for the
>>> intended goal of rate-limiting which is to enable small spends over time
>>> from a large amount and to prevent theft of a large amount with a single
>>> transaction.
>>>
>>> To explain the proposed design more clearly, I have renamed the params
>>> as follows:
>>>
>>> epochStart: block height of first block of the current epoch (was: h0);
>>> epochEnd: block height of last block of the current epoch (was: h1);
>>> limit: the maximum total amount allowed to be spent within the current
>>> epoch (was: a);
>>> remain: the remaining amount allowed to be spent within the current
>>> epoch (was: a_remaining);
>>>
>>> Also, to illustrate that the params are specific to a transaction, I
>>> will hence precede the param with the transaction name like so:
>>> tx8_limit, tx31c_remain, tx42z_epochStart, ... etc.
>>>
>>> For simplicity, only transactions with no more than one rate-limited
>>> input are considered, and with no more than two outputs: one rate-limited
>>> change output, and a normal (not rate-limited) output.
>>>
>>> Normally, a simple transaction generates two outputs: one for a payment
>>> to a third party and one for the change address. Again for simplicity, we
>>> demand that a transaction which introduces rate-limiting must have only a
>>> single, rate-limited output. The validation rule might be: if a transaction
>>> has rate-limiting params and none of its inputs are rate-limited, then
>>> there must be only a single (rate-limited) output (and no second or change
>>> output).
>>>
>>> Consider rate limiting transactions tx1 having one or more normal (non
>>> rate-limited) inputs:
>>>
>>> tx1 gets included at block height 800004;
>>> The inputs of tx1 are not rate-limited => tx1 must have only a single
>>> output which will become rate-limited;
>>> params: tx1_epochStart=800001, tx1_epochEnd=800100, tx1_limit=200k,
>>> tx1_remain=200k;
>>> => This defines that an epoch has 100 blocks and no more than 200k sats
>>> may be spent in any one epoch. Within the current epoch, 200k sats may
>>> still be spent.
>>>
>>> This transaction begins to rate-limit a set of inputs, so it has a
>>> single rate-limited output.
>>> Let's explore transactions that have the output of tx1 as their input. I
>>> will denote the output of tx1 as "out1".
>>>
>>> tx2a has out1 as its only input;
>>> tx2a spends 50k sats and gets included at block height 803050;
>>> tx2a specifies the following params for its change output "chg2a":
>>> chg2a_epochStart=803001, chg2a_epochEnd=803100;
>>> chg2a_limit=200k, chg2a_remain=150k.
>>>
>>> To enforce rate-limiting, the system must validate the params of the
>>> change output chg2a to ensure that overspending is not allowed.
>>>
>>> The above params are allowed because:
>>> => 1. the epoch does not become smaller than 100 blocks [(chg2a_epochEnd
>>> - chg2a_epochStart) >= (tx1_epochEnd - tx1_epochStart)]
>>> => 2. tx1_limit has not been increased (ch2a_limit <= tx1_limit)
>>> => 3. the amount spent (50k sats) does not exceed tx1_remain AND does
>>> not exceed chg2a_limit;
>>> => 4. chg2a_remain" is 50k sats less than chg2a_limit.
>>>
>>> A transaction may also further constrain further spending like so:
>>>
>>> tx2b has out1as its only input;
>>> tx2b spends 8k sats and gets included at block height 808105;
>>> tx2b specifies the following params for its change output "chg2b":
>>> chg2b_epochStart=808101, chg2b_epochEnd=808250;
>>> chg2b_limit=10k, chg2b_remain=0.
>>>
>>> These params are allowed because:
>>> => 1. the epoch does not become smaller than100 blocks. It is fine to
>>> increase the epoch to 150 blocks because it does not enable exceeding the
>>> original rate-limit;
>>> => 2. the limit (chg2b_limit) has been decreased to 10k sats, further
>>> restricting the maximum amount allowed to be spent within the current and
>>> any subsequent epochs;
>>> => 3. the amount spent (10k sats) does not exceed tx1_remain AND does
>>> not exceed chg2b_limit;
>>> => 4. chg2b_remain has been set to zero, meaning that within the current
>>> epoch (block height 808101 to and including 808250), tx2b cannot be used as
>>> a spending input to any transaction.
>>>
>>> Starting from block height 808251, a new epoch will start and the
>>> rate-limited output of tx2b may again be used as an input for a subsequent
>>> rate-limited transaction tx3b. This transaction tx3b must again be
>>> accompanied by params that do not violate the rate-limit as defined by the
>>> params of tx2b and which are stored with output out2b. So, the epoch of
>>> tx3b must be at minimum 150 blocks, the maximum that is allowed to be spent
>>> per epoch is at most 10k sats, and chg3b_remain must be decreased by at
>>> least the amount spent by tx3b.
>>>
>>> From the above, the rate-limiting mechanics should hopefully be clear
>>> and full set of validation rules could be defined in a more generalized way
>>> with little additional effort.
>>>
>>> Note that I conveniently avoided talking about how to represent the
>>> parameters within transactions or outputs, simply because I currently lack
>>> enough understanding to reason about this. I am hoping that others may
>>> offer help.
>>>
>>> Zac
>>>
>>>
>>> On Tue, Aug 3, 2021 at 8:12 PM Billy Tetrud <billy.tetrud at gmail.com>
>>> wrote:
>>>
>>>> > To enable more straightforward validation logic.
>>>> > within the current epoch
>>>>
>>>> Ah I see, this is all limited to within a single epoch. I think that
>>>> sufficiently limits the window of time in which nodes have to store
>>>> information for rate limited outputs. However, I don't see how specifying
>>>> block ranges simplifies the logic - wouldn't this complicate the logic with
>>>> additional user-specified constraints? It also prevents the output from
>>>> being able to be rate limited over the span of multiple epochs, which would
>>>> seem to make it a lot more difficult to use for certain types of wallets
>>>> (eg cold wallets).
>>>>
>>>> I think I see the logic of your 'remaining' parameter there. If you
>>>> start with a single rate-limited input, you can split that into many
>>>> outputs, only one of which have a 'remaining' balance. The rest can simply
>>>> remain unspendable for the rest of the epoch. That way these things don't
>>>> need to be tied together. However, that doesn't solve the problem of 3rd
>>>> parties being able to send money into the wallet.
>>>>
>>>> > I don't believe that the marginal added functionality would justify
>>>> the increased implementation complexity
>>>>
>>>> Perhaps, but I think there is a lot of benefit in allowing these kinds
>>>> of things to operate as similarly as possible to normal transactions, for
>>>> one because of usability reasons. If each opcode has its own quirks that
>>>> are not intuitively related to their purpose (eg if a rate-limited wallet
>>>> had no way to get a receiving address), it would confuse end-users (eg who
>>>> wonder how to get a receiving address and how they can ask people to send
>>>> money into their wallet) or require a lot of technical complexity in
>>>> applications (eg to support something like cooperatively connecting with
>>>> their wallet so that a transaction can be made that creates a new
>>>> single-output for the wallet). A little complexity in this opcode can save
>>>> a lot of external complexity here I think.
>>>>
>>>> > my understanding of Bitcoin is way too low to be able to write a BIP
>>>> and do the implementation
>>>>
>>>> You might be able to find people willing to help. I would be willing to
>>>> help write the BIP spec. I'm not the right person to help with the
>>>> implementation, but perhaps you could find someone else who is. Even if the
>>>> BIP isn't adopted, it could be a starting point or inspiration for someone
>>>> else to write an improved version.
>>>>
>>>> On Mon, Aug 2, 2021 at 2:32 AM Zac Greenwood <zachgrw at gmail.com> wrote:
>>>>
>>>>> [Note: I've moved your reply to the newly started thread]
>>>>>
>>>>> Hi Billy,
>>>>>
>>>>> Thank you for your kind and encouraging feedback.
>>>>>
>>>>> I don't quite understand why you'd want to define a specific span of
>>>>>> blocks for the rate limit. Why not just specify the size of the window (in
>>>>>> blocks) to rate limit within, and the limit?
>>>>>
>>>>>
>>>>> To enable more straightforward validation logic.
>>>>>
>>>>> You mentioned change addresses, however, with the parameters you
>>>>>> defined, there would be no way to connect together the change address with
>>>>>> the original address, meaning they would have completely separate rate
>>>>>> limits, which wouldn't work since the change output would ignore the
>>>>>> previous rate limit.
>>>>>
>>>>>
>>>>> The rate-limiting parameters must be re-specified for each
>>>>> rate-limited input. So, a transaction that has a rate-limited input is only
>>>>> valid if its output is itself rate-limited such that it does not violate
>>>>> the rate-limiting constraints of its input.
>>>>>
>>>>> In my thread-starter, I gave the below example of a rate-limited
>>>>> address a2 that serves as input for transaction t2:
>>>>>
>>>>> a2: 99.8 sats at height 800100;
>>>>> Rate-limit params: h0=800000, h1=800143, a=500k, a_remaining=300k;
>>>>>
>>>>> Transaction t2:
>>>>> Included at block height 800200
>>>>> Spend: 400k + fees.
>>>>> Rate-limiting params: h0=800144, h1=800287, a=500k, a_remaining=100k.
>>>>>
>>>>> Note how transaction t2 re-specifies the rate-limiting parameters.
>>>>> Validation must ensure that the re-specified parameters are within bounds,
>>>>> i.e., do not allow more spending per epoch than the rate-limiting
>>>>> parameters of its input address a2. Re-specifying the rate-limiting
>>>>> parameters offers the flexibility to further restrict spending, or to
>>>>> disable any additional spending within the current epoch by setting
>>>>> a_remaining to zero.
>>>>>
>>>>> Result:
>>>>> Value at destination address: 400k sats;
>>>>> Rate limiting params at destination address: none;
>>>>> Value at change address a3: 99.4m sats;
>>>>> Rate limiting params at change address a3: h0=800144, h1=800287,
>>>>> a=500k, a_remaining=100k.
>>>>>
>>>>> As a design principle I believe it makes sense if the system is able
>>>>> to verify the validity of a transaction without having to consider any
>>>>> transactions that precede its inputs. As a side-note, doing away with this
>>>>> design principle would however enable more sophisticated rate-limiting
>>>>> (such as rate-limiting per sliding window instead of rate-limiting per
>>>>> epoch having a fixed start and end block), but while at the same time
>>>>> reducing the size of per rate-limiting transaction (because it would enable
>>>>> specifying the rate-limiting parameters more space-efficiently). To test
>>>>> the waters and to keep things relatively simple, I chose not to go into
>>>>> this enhanced form of rate-limiting.
>>>>>
>>>>> I haven't gone into how to process a transaction having multiple
>>>>> rate-limited inputs. The easiest way to handle this case is to not allow
>>>>> any transaction having more than one rate-limited input. One could imagine
>>>>> complex logic to handle transactions having multiple rate-limited inputs by
>>>>> creating multiple rate-limited change addresses. However at first glance I
>>>>> don't believe that the marginal added functionality would justify the
>>>>> increased implementation complexity.
>>>>>
>>>>>  I'd be interested in seeing you write a BIP for this.
>>>>>
>>>>>
>>>>> Thank you, but sadly my understanding of Bitcoin is way too low to be
>>>>> able to write a BIP and do the implementation. However I see tremendous
>>>>> value in this functionality. Favorable feedback of the list regarding the
>>>>> usefulness and the technical feasibility of rate-limiting functionality
>>>>> would of course be an encouragement for me to descend further down the
>>>>> rabbit hole.
>>>>>
>>>>> Zac
>>>>>
>>>>>
>>>>> On Sun, Aug 1, 2021 at 10:09 AM Zac Greenwood <zachgrw at gmail.com>
>>>>> wrote:
>>>>>
>>>>>> [Resubmitting to list with minor edits. My previous submission ended
>>>>>> up inside an existing thread, apologies.]
>>>>>>
>>>>>> Hi list,
>>>>>>
>>>>>> I'd like to explore whether it is feasible to implement new scripting
>>>>>> capabilities in Bitcoin that enable limiting the output amount of a
>>>>>> transaction based on the total value of its inputs. In other words, to
>>>>>> implement the ability to limit the maximum amount that can be sent from an
>>>>>> address.
>>>>>>
>>>>>> Two use cases come to mind:
>>>>>>
>>>>>> UC1: enable a user to add additional protection their funds by
>>>>>> rate-limiting the amount that they are allowed to send during a certain
>>>>>> period (measured in blocks). A typical use case might be a user that
>>>>>> intends to hodl their bitcoin, but still wishes to occasionally send small
>>>>>> amounts. Rate-limiting avoids an attacker from sweeping all the users'
>>>>>> funds in a single transaction, allowing the user to become aware of the
>>>>>> theft and intervene to prevent further thefts.
>>>>>>
>>>>>> UC2: exchanges may wish to rate-limit addresses containing large
>>>>>> amounts of bitcoin, adding warm- or hot-wallet functionality to a
>>>>>> cold-storage address. This would enable an exchange to drastically reduce
>>>>>> the number of times a cold wallet must be accessed with private keys that
>>>>>> give access to the full amount.
>>>>>>
>>>>>> In a typical setup, I'd envision using multisig such that the user
>>>>>> has two sets of private keys to their encumbered address (with a "set" of
>>>>>> keys meaning "one or more" keys). One set of private keys allows only for
>>>>>> sending with rate-limiting restrictions in place, and a second set of
>>>>>> private keys allowing for sending any amount without rate-limiting,
>>>>>> effectively overriding such restriction.
>>>>>>
>>>>>> The parameters that define in what way an output is rate-limited
>>>>>> might be defined as follows:
>>>>>>
>>>>>> Param 1: a block height "h0" indicating the first block height of an
>>>>>> epoch;
>>>>>> Param 2: a block height "h1" indicating the last block height of an
>>>>>> epoch;
>>>>>> Param 3: an amount "a" in satoshi indicating the maximum amount that
>>>>>> is allowed to be sent in any epoch;
>>>>>> Param 4: an amount "a_remaining" (in satoshi) indicating the maximum
>>>>>> amount that is allowed to be sent within the current epoch.
>>>>>>
>>>>>> For example, consider an input containing 100m sats (1 BTC) which has
>>>>>> been rate-limited with parameters (h0, h1, a, a_remaining) of (800000,
>>>>>> 800143, 500k, 500k). These parameters define that the address is
>>>>>> rate-limited to sending a maximum of 500k sats in the current epoch that
>>>>>> starts at block height 800000 and ends at height 800143 (or about one day
>>>>>> ignoring block time variance) and that the full amount of 500k is still
>>>>>> sendable. These rate-limiting parameters ensure that it takes at minimum
>>>>>> 100m / 500k = 200 transactions and 200 x 144 blocks or about 200 days to
>>>>>> spend the full 100m sats. As noted earlier, in a typical setup a user
>>>>>> should retain the option to transact the entire amount using a second (set
>>>>>> of) private key(s).
>>>>>>
>>>>>> For rate-limiting to work, any change output created by a transaction
>>>>>> from a rate-limited address must itself be rate-limited as well. For
>>>>>> instance, expanding on the above example, assume that the user spends 200k
>>>>>> sats from a rate-limited address a1 containing 100m sats:
>>>>>>
>>>>>> Start situation:
>>>>>> At block height 800000: rate-limited address a1 is created;
>>>>>> Value of a1: 100.0m sats;
>>>>>> Rate limiting params of a1: h0=800000, h1=800143, a=500k,
>>>>>> a_remaining=500k;
>>>>>>
>>>>>> Transaction t1:
>>>>>> Included at block height 800100;
>>>>>> Spend: 200k + fee;
>>>>>> Rate limiting params: h0=800000, h1=800143, a=500k, a_remaining=300k.
>>>>>>
>>>>>> Result:
>>>>>> Value at destination address: 200k sats;
>>>>>> Rate limiting params at destination address: none;
>>>>>> Value at change address a2: 99.8m sats;
>>>>>> Rate limiting params at change address a2: h0=800000, h1=800143,
>>>>>> a=500k, a_remaining=300k.
>>>>>>
>>>>>> In order to properly enforce rate limiting, the change address must
>>>>>> be rate-limited such that the original rate limit of 500k sats per 144
>>>>>> blocks cannot be exceeded. In this example, the change address a2 were
>>>>>> given the same rate limiting parameters as the transaction that served as
>>>>>> its input. As a result, from block 800100 up until and including block
>>>>>> 800143, a maximum amount of 300k sats is allowed to be spent from the
>>>>>> change address.
>>>>>>
>>>>>> Example continued:
>>>>>> a2: 99.8 sats at height 800100;
>>>>>> Rate-limit params: h0=800000, h1=800143, a=500k, a_remaining=300k;
>>>>>>
>>>>>> Transaction t2:
>>>>>> Included at block height 800200
>>>>>> Spend: 400k + fees.
>>>>>> Rate-limiting params: h0=800144, h1=800287, a=500k, a_remaining=100k.
>>>>>>
>>>>>> Result:
>>>>>> Value at destination address: 400k sats;
>>>>>> Rate limiting params at destination address: none;
>>>>>> Value at change address a3: 99.4m sats;
>>>>>> Rate limiting params at change address a3: h0=800144, h1=800287,
>>>>>> a=500k, a_remaining=100k.
>>>>>>
>>>>>> Transaction t2 is allowed because it falls within the next epoch
>>>>>> (running from 800144 to 800287) so a spend of 400k does not violate the
>>>>>> constraint of 500k per epoch.
>>>>>>
>>>>>> As could be seen, the rate limiting parameters are part of the
>>>>>> transaction and chosen by the user (or their wallet). This means that the
>>>>>> parameters must be validated to ensure that they do not violate the
>>>>>> intended constraints.
>>>>>>
>>>>>> For instance, this transaction should not be allowed:
>>>>>> a2: 99.8 sats at height 800100;
>>>>>> Rate-limit params of a2: h0=800000, h1=800143, a=500k,
>>>>>> a_remaining=300k;
>>>>>>
>>>>>> Transaction t2a:
>>>>>> Included at block height 800200;
>>>>>> Spend: 400k + fees;
>>>>>> Rate-limit params: h0=800124, h1=800267, a=500k, a_remaining=100k.
>>>>>>
>>>>>> This transaction t2a attempts to shift the epoch forward by 20 blocks
>>>>>> such that it starts at 800124 instead of 800144. Shifting the epoch forward
>>>>>> like this must not be allowed because it enables spending more that the
>>>>>> rate limit allows, which is 500k in any epoch of 144 blocks. It would
>>>>>> enable overspending:
>>>>>>
>>>>>> t1: spend 200k at 800100 (epoch 1: total: 200k);
>>>>>> t2a: spend 400k at 800200 (epoch 2: total: 400k);
>>>>>> t3a: spend 100k at 800201 (epoch 2: total: 500k);
>>>>>> t4a: spend 500k at 800268 (epoch 2: total: 1000k, overspending for
>>>>>> epoch 2).
>>>>>>
>>>>>> Specifying the rate-limiting parameters explicitly at every
>>>>>> transaction allows the user to tighten the spending limit by setting
>>>>>> tighter limits or for instance by setting a_remainder to 0 if they wish to
>>>>>> enforce not spending more during an epoch. A second advantage of explicitly
>>>>>> specifying the four rate-limiting parameters with each transaction is that
>>>>>> it allows the system to fully validate the transaction without having to
>>>>>> consider any previous transactions within an epoch.
>>>>>>
>>>>>> I will stop here because I would like to gauge interest in this idea
>>>>>> first before continuing work on other aspects. Two main pieces of work jump
>>>>>> to mind:
>>>>>>
>>>>>> Define all validations;
>>>>>> Describe aggregate behaviour of multiple (rate-limited) inputs, proof
>>>>>> that two rate-limited addresses cannot spend more than the sum of their
>>>>>> individual limits.
>>>>>>
>>>>>> Zac
>>>>>>
>>>>>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.linuxfoundation.org/pipermail/bitcoin-dev/attachments/20210809/689af0be/attachment-0001.html>


More information about the bitcoin-dev mailing list