[Bridge] Bridge and iptables
Sathyan M
sathym at gmail.com
Tue Feb 12 22:19:42 PST 2008
Hi,
I am using linux kernle-2.6.15, iptables-1.4 and bridge-utils-1.4.
Everything intslled without any issue and i am able to enable the
bridge and traffic is also flowing without any issue.
But i did not see any traffic on the iptables forward chain due to
which i am not able to control the traffic.
Do i requie enable anything more to make the traffic pass through
iptables forward chain.
Please look into the configuration
ip addr
1: lo: <LOOPBACK> mtu 16436 qdisc noqueue
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: tunl0: <NOARP> mtu 1480 qdisc noop
link/ipip 0.0.0.0 brd 0.0.0.0
3: gre0: <NOARP> mtu 1476 qdisc noop
link/gre 0.0.0.0 brd 0.0.0.0
10: eth0: <BROADCAST,MULTICAST,PROMISC,UP> mtu 1500 qdisc pfifo_fast qlen 1000
link/ether 00:07:d9:0d:67:5a brd ff:ff:ff:ff:ff:ff
11: eth1: <BROADCAST,MULTICAST,PROMISC,UP> mtu 1500 qdisc pfifo_fast qlen 1000
link/ether 00:07:d9:0d:67:03 brd ff:ff:ff:ff:ff:ff
12: br0: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue
link/ether 00:07:d9:0d:67:03 brd ff:ff:ff:ff:ff:ff
inet 10.10.5.2/24 brd 10.10.5.255 scope global br0
iptables -L -nvx
Chain INPUT (policy ACCEPT 4484 packets, 330543 bytes)
pkts bytes target prot opt in out source
destination
Chain FORWARD (policy ACCEPT 0 packets, 0 bytes)
pkts bytes target prot opt in out source
destination
Chain OUTPUT (policy ACCEPT 4105 packets, 2046064 bytes)
pkts bytes target prot opt in out source
destination
More information about the Bridge
mailing list