[Bridge] DHCP problem on bridge
Liew Kian Yang
kianyang at agroup.com.my
Sun Nov 7 17:33:12 PST 2010
Dear Stephen,
Thank you for your information. I will try and let you know the result :)
Regards,
Kian Yang, Liew
-----Original Message-----
From: Stephen Hemminger [mailto:shemminger at linux-foundation.org]
Sent: 2010年11月7日 12:27
To: Kian Yang Liew
Cc: bridge at linux-foundation.org; Liew Kian Yang
Subject: Re: [Bridge] DHCP problem on bridge
On Sun, 31 Oct 2010 00:31:11 +0800
Kian Yang Liew <liewkianyang at gmail.com> wrote:
> Dear All,
>
>
>
> I have a network with 500 vlan and I bind all these 500 vlan into 1 bridge
> interface. Then I have run a dhcp server on this bridge interface to
provide
> dhcp to all the computer in the vlan. It look find all the time, but
> sometime, some of the computer on vlan will not able to get the ip from
dhcp
> server but after I remove the vlan and add back to the bridge it will work
> again. The most serious case is sometime there will be a dhcp problem on
> vlan 1 as well, and I need to reboot the server only can make the service
> back to normal.
>
>
>
> The setting is as below
>
>
>
>
>
> Vconfig add eth1 2
>
> Vconfig add eth1 3
>
> .
>
> .
>
> .
>
> .
>
> .
>
> .vconfig add eth1 500
>
>
>
> Then ifconfig eth1.2 up …. Ifconfig eth1.500 up
>
> Then brctl addbr br1, brctl addif br1 eth1.2 ……. Brctl addif br1
eth1.500
>
>
>
> Does anyone have face this problem before? Your reply is highly
appreciate.
>
brctl stp br0 off
brctl setfd br0 0
More information about the Bridge
mailing list