[Bridge] F13 bridge issues
shemminger at linux-foundation.org
Wed Oct 13 08:46:39 PDT 2010
On Wed, 13 Oct 2010 11:27:18 -0400
Mark Liggett <mliggett at btisystems.com> wrote:
> Hi everyone,
> I'm using Ethernet bridging on an up-to-date F13 system. I've created a bridge adapter br0 and added eth2 and eth3 to it. Everything works as expected for a short time before the 2 Ethernet cards used in the bridge start reporting millions of errors. I confirmed this is the case on 2 separate systems (although both systems use Intel NICs). To try to resolve this I've:
> - Compiled and installed the latest Intel igb driver 2.3.4
> - Installed the latest Fedora kernel 188.8.131.52-56
> - Uninstalled the standard bridge-utils 1.2-9, before compiling and installing version 1.4
> I've pastebin'd the system config here: http://pastebin.ca/1960777
> You can see the errors listed on eth2 and eth3. I've tried both setting the bridge up using /etc/sysconfig/network-scripts as well as manually (using brctl and ifconfig).
> My bridge/Ethernet interface configs are listed here: http://pastebin.ca/1960790
> Any suggestions would be greatly appreciated.
You might also be creating a packet loop?
Turn on spanning tree and find out.
More information about the Bridge