[Bridge] [PATCH v9 net-next 00/12] Add basic VLAN support to bridges
vyasevic at redhat.com
Fri Feb 1 20:01:58 UTC 2013
Changes since v8:
* Unified vlans_to_* calls into a single interface
* Fixed the rest of the issues report by Michal Miroslaw
* Fixed a bug where fdb entries were not created for all added vlans.
Changes since v7:
* Rebases on the latest net-next and removed the vlan wrapper patch from
* Fixed a crash in br_fdb_add/br_fdb_delete.
Changes since v6:
* VLANs are now stored in a VLAN bitmap per port. This allows for O(1)
lookup at ingress and egress. We simply check to see if the bit associated
with the vlan id is set in the map. The drawback to this approach is that
it wastes some space when there is only a small number of VLANs.
* In addition to the build time configuration option, VLAN filtering also has
a configuration paramter in sysfs. By default the filtering is turned off
and all traffic is permitted. When the filtring is turned on, we do strict
matching to the filter configured. Thus, if there is no configuration, all
packets are rejected. This was done to make the behavior more streight
forward. Without this (and if egress policy patch is rejected), the
decision for how to forward untagged traffic that was not filtered at ingress
is almost impossible to make. It would not be right to deliver to every
port that has PVID set as, each port may have a different PVID.
* Separate egress policy bitmap patch has been isolated and is provided last
in the series. This has been a more contentious piece of functionality and I
wanted to isolate it so that it could easily be dropped and not block the whole
Changes since v5:
- Pulled VLAN filtering into its own file and made it a configuration options.
- Made new vlan filtering option dependent on VLAN_8021Q.
- Got rid of HW filter inlines and moved then vlan_core.c.
(All of the above suggested by Stephen Hemminger)
Changes since v4:
- Pull per-port vlan data into its own structures and give it to the bridge
device thus making bridge device behave like a regular port for vlan
- Add a per-vlan 'untagged' bitmap that determins egress policy. If a port
is part of this bitmap, traffic egresses untagged.
- PVID is now used for ingress policy only. Incomming frames without VLAN tag
are assigned to the PVID vlan. Egress is determined via bitmap memberships.
- Allow for incremental config of a vlan. Now, PVID and untagged memberships
may be set on existing vlans. They however can NOT be cleared separately.
- VLAN deletion is now done via RTM_DELLINK command for PF_BRIDGE family.
This cleans up the netlink interface.
Changes since v3:
- Re-integrated compiler problems that got left out last time. Appologies.
- checkpatches.pl errors fixed
Changes since v2:
- Added inline functiosn to manimulate vlan hw filters and re-use in 8021q
and bridge code.
- Use rtnl_dereference (Michael Tsirkin)
- Remove synchronize_net() call (Eric Dumazet)
- Fix NULL ptr deref bug I introduced in br_ifinfo_notify.
Changes since v1:
- Fixed some forwarding bugs.
- Add vlan to local fdb entries. New local entries are created per vlan
to facilite correct forwarding to bridge interface.
- Allow configuration of vlans directly on the bridge master device
in addition to ports.
Changes since rfc v2:
- Per-port vlan bitmap is gone and is replaced with a vlan list.
- Added bridge vlan list, which is referenced by each port. Entries in
the birdge vlan list have port bitmap that shows which port are parts
of which vlan.
- Netlink API changes.
- Dropped sysfs support for now. If people think this is really usefull,
can add it back.
- Support for native/untagged vlans.
Changes since rfc v1:
- Comments addressed regarding formatting and RCU usage
- iocts have been removed and changed over the netlink interface.
- Added support of user added ndb entries.
- changed sysfs interface to export a bitmap. Also added a write interface.
I am not sure how much I like it, but it made my testing easier/faster. I
might change the write interface to take text instead of binary.
Vlad Yasevich (12):
bridge: Add vlan filtering infrastructure
bridge: Validate that vlan is permitted on ingress
bridge: Verify that a vlan is allowed to egress on give port
bridge: Add netlink interface to configure vlans on bridge ports
bridge: Add the ability to configure pvid
bridge: Implement vlan ingress/egress policy
bridge: Add vlan to unicast fdb entries
bridge: Add vlan id to multicast groups
bridge: Add vlan support to static neighbors
bridge: Add vlan support for local fdb entries
bridge: Dump vlan information from a bridge port
bridge: Separate egress policy bitmap
drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 5 +-
drivers/net/macvlan.c | 2 +-
drivers/net/vxlan.c | 3 +-
include/linux/netdevice.h | 6 +-
include/uapi/linux/if_bridge.h | 13 +-
include/uapi/linux/neighbour.h | 1 +
include/uapi/linux/rtnetlink.h | 1 +
net/8021q/vlan_core.c | 1 +
net/bridge/Kconfig | 14 +
net/bridge/Makefile | 2 +
net/bridge/br_device.c | 7 +-
net/bridge/br_fdb.c | 259 ++++++++++++---
net/bridge/br_forward.c | 9 +
net/bridge/br_if.c | 4 +-
net/bridge/br_input.c | 28 ++-
net/bridge/br_multicast.c | 69 +++--
net/bridge/br_netlink.c | 239 ++++++++++++--
net/bridge/br_private.h | 152 ++++++++-
net/bridge/br_sysfs_br.c | 21 ++
net/bridge/br_vlan.c | 444 +++++++++++++++++++++++++
net/core/rtnetlink.c | 111 ++++++-
21 files changed, 1262 insertions(+), 129 deletions(-)
create mode 100644 net/bridge/br_vlan.c
More information about the Bridge