[Bridge] [PATCH v7 net-next 01/12] bridge: Add vlan filtering infrastructure
Michał Mirosław
mirqus at gmail.com
Thu Jan 31 19:57:01 UTC 2013
2013/1/31 Vlad Yasevich <vyasevic at redhat.com>:
> Adds an optional infrustructure component to bridge that would allow
> native vlan filtering in the bridge. Each bridge port (as well
> as the bridge device) now get a VLAN bitmap. Each bit in the bitmap
> is associated with a vlan id. This way if the bit corresponding to
> the vid is set in the bitmap that the packet with vid is allowed to
> enter and exit the port.
>
> Write access the bitmap is protected by RTNL and read access
> protected by RCU.
[...]
> +static int __vlan_del(struct net_port_vlans *v, u16 vid)
> +{
> + unsigned long first_bit;
> + unsigned long last_bit;
> +
> + if (!test_bit(vid, v->vlan_bitmap))
> + return -EINVAL;
> +
> + /* Check to see if any other vlans are in this table. If this
> + * is the last vlan, delete the whole structure. If this is not the
> + * last vlan, just clear the bit.
> + */
> + first_bit = find_first_bit(v->vlan_bitmap, BR_VLAN_BITMAP_LEN);
> + last_bit = find_last_bit(v->vlan_bitmap, BR_VLAN_BITMAP_LEN);
> +
> + if (v->port_idx && vid) {
> + struct net_device *dev = vlans_to_port(v)->dev;
> +
> + if (dev->features & NETIF_F_HW_VLAN_FILTER)
> + dev->netdev_ops->ndo_vlan_rx_kill_vid(dev, vid);
> + }
> +
> + clear_bit(vid, v->vlan_bitmap);
> + if (first_bit == last_bit) {
if (bitmap_empty(v->vlan_bitmap, BR_VLAN_BITMAP_LEN))
> + if (v->port_idx) {
> + struct net_bridge_port *p = vlans_to_port(v);
> + rcu_assign_pointer(p->vlan_info, NULL);
> + } else {
> + struct net_bridge *br = vlans_to_bridge(v);
> + rcu_assign_pointer(br->vlan_info, NULL);
> + }
You seem to use vlans_to_port/vlans_to_bridge only to get at
vlan_info. Maybe that could be abstracted to a single interface, or
even change v->parent to be a 'net_port_vlans **'?
Best Regards,
Michał Mirosław
More information about the Bridge
mailing list