[Bridge] [PATCH v7 net-next 01/12] bridge: Add vlan filtering infrastructure

Vlad Yasevich vyasevic at redhat.com
Thu Jan 31 20:34:57 UTC 2013


On 01/31/2013 03:33 PM, Simon Barber wrote:
> I wrote a similar patch a few years ago:
>
> https://lists.linux-foundation.org/pipermail/bridge/2006-September/005046.html
>
>
> This patch also added the possibility to define a native vlan for each
> port and for the bridge port itself - is there any interest in this
> feature as well as the filtering?
>

See patch 5 and 6 and the series :)

-vlad

> Simon
>
>
> On 01/31/2013 11:57 AM, Michał Mirosław wrote:
>> 2013/1/31 Vlad Yasevich <vyasevic at redhat.com>:
>>> Adds an optional infrustructure component to bridge that would allow
>>> native vlan filtering in the bridge.  Each bridge port (as well
>>> as the bridge device) now get a VLAN bitmap.  Each bit in the bitmap
>>> is associated with a vlan id.  This way if the bit corresponding to
>>> the vid is set in the bitmap that the packet with vid is allowed to
>>> enter and exit the port.
>>>
>>> Write access the bitmap is protected by RTNL and read access
>>> protected by RCU.
>> [...]
>>> +static int __vlan_del(struct net_port_vlans *v, u16 vid)
>>> +{
>>> +       unsigned long first_bit;
>>> +       unsigned long last_bit;
>>> +
>>> +       if (!test_bit(vid, v->vlan_bitmap))
>>> +               return -EINVAL;
>>> +
>>> +       /* Check to see if any other vlans are in this table.  If this
>>> +        * is the last vlan, delete the whole structure.  If this is
>>> not the
>>> +        * last vlan, just clear the bit.
>>> +        */
>>> +       first_bit = find_first_bit(v->vlan_bitmap, BR_VLAN_BITMAP_LEN);
>>> +       last_bit = find_last_bit(v->vlan_bitmap, BR_VLAN_BITMAP_LEN);
>>> +
>>> +       if (v->port_idx && vid) {
>>> +               struct net_device *dev = vlans_to_port(v)->dev;
>>> +
>>> +               if (dev->features & NETIF_F_HW_VLAN_FILTER)
>>> +                       dev->netdev_ops->ndo_vlan_rx_kill_vid(dev, vid);
>>> +       }
>>> +
>>> +       clear_bit(vid, v->vlan_bitmap);
>>> +       if (first_bit == last_bit) {
>>
>> if (bitmap_empty(v->vlan_bitmap, BR_VLAN_BITMAP_LEN))
>>
>>> +               if (v->port_idx) {
>>> +                       struct net_bridge_port *p = vlans_to_port(v);
>>> +                       rcu_assign_pointer(p->vlan_info, NULL);
>>> +               } else {
>>> +                       struct net_bridge *br = vlans_to_bridge(v);
>>> +                       rcu_assign_pointer(br->vlan_info, NULL);
>>> +               }
>>
>> You seem to use vlans_to_port/vlans_to_bridge only to get at
>> vlan_info. Maybe that could be abstracted to a single interface, or
>> even change v->parent to be a 'net_port_vlans **'?
>>
>> Best Regards,
>> Michał Mirosław
>>



More information about the Bridge mailing list