[Bridge] [PATCH net-next 0/4] Allow bridge to function in non-promisc mode

[Michael S. Tsirkin]

On Thu, Mar 14, 2013 at 11:10:34AM -0400, Vlad Yasevich wrote:
> On 03/13/2013 04:31 PM, Michael S. Tsirkin wrote:
> >On Tue, Mar 12, 2013 at 09:45:22PM -0400, Vlad Yasevich wrote:
> >>The series adds an ability for the bridge to function in non-promiscuous mode.
> >>We do it in 3 steps.
> >>First we add an interface to palce the switch into non-promisc mode.  In
> >>this mode, all port of the switch turn promisc off and turn on IFF_ALLMULTI
> >>to continue handling multicast traffic.
> >
> >Hmm why not go the extra mile and do same thing for multicast?
> 
> That would be simple enough to add, as I think all this would
> require is an additional dev_mc_sync() call.
> 
> I wanted to get basic functionality and unicast working.
> 
> >
> >>Second we add an ability to designate a bridge port as uplink.
> >>Third we add IFF_UNICAST_FLT support to the bridge and sync all unicast
> >>HW addresses to the uplink ports.
> >>Default bridge operation continues to remain "promiscuous".  The new
> >>functionality has to be enabled via sysfs (similar to other bridge extensions).
> >>
> >>The uplink mode is implemented as a flag on a bridge port.  The api to
> >>change that flag follows the existing api to enable/disable other existing
> >>flags.
> >
> >Actually, it seems a bit tricky to use correctly.  Specifying MACs is
> >straight-forward enough, but as you add and remove interfaces, you would
> >need to play with uplink and promisc bits.
> 
> Not the promisc bits since this patch series proposes a bridge wide
> setting.  Yes, uplink bits would need to be played with though.  I'd
> really love to specify those bits when the link is added, but the
> netlink operation for bridge is a bit odd.
> 
> May be I should re-fix that.
> 
> > I also think that for setups
> >you describe, where we really want to forward traffic to VMs and that's
> >all, promisc mode is an implementation detail. If true it's a mistake to
> >expose it in an interface.  Here's an idea how we could make it work
> >automatically:
> 
> This is something Stephen suggested earlier and controlling promisc mode
> based on whether uplinks are set or not.
> 
> >
> >- Like your patch does, allow two kinds of ports: port that only wants
> >   specific addresses and "wildcard" port that can get all addresses
> >   All ports default to wildcard as a compatible way
> >- For port A, if there is some wildcard port besides A, A must be
> >   promiscous since maybe it needs to get packets that will be later
> >   forwardd to A
> >- For port A, if there are no wildcard ports, or if A is the only
> >   wildcard, A does not need to be promiscous.
> >   Instead we can program it with addresses of all other ports.
> 
> So, according to the above, you can only ever have 1 port that is
> 'address specific'.  If you have more then one, they have to be
> promiscuous to allow bridging between them.

No, the reverse. Only 1 wildcard port without promisc.

> The alternative might be to manipulate mac filter based on the
> addresses learned.  This will most likely rather quickly put the
> port in promiscuous mode anyway if the event that a bridge is not
> really an edge device.
> 
> -vlad

It won't work, learning requires that you flood
addresses that are not learned yet. If you disable promisc
hardware filters them.

> >
> >Exactly same logic applies, separately, for unicast, where promisc
> >means all uni, and multicast, where promisc means all multi.
> >
> >Now there's no special unplink port, no need to enable/disable special
> >mode, nothing: just program addresses for ports and go.
> >
> >
> >>Changes since rfc v2:
> >>* Sync/unsync address on uplink upon the uplink flag change.  This allows
> >>for uplink replacements without loss of addresses.
> >>
> >>Changes since rfc v1:
> >>* Fixed submit log
> >>* Simplifyied uplink logic.  Uplink is now a flag per port.  This removes the
> >>   need for a separate list.
> >>* Clean-up hw list once the port has been removed.
> >>
> >>Vlad Yasevich (4):
> >>   bridge: Add sysfs interface to control promisc mode
> >>   bridge: Allow an ability to designate an uplink port
> >>   bridge: Implement IFF_UNICAST_FLT
> >>   bridge: sync device list when a new uplink is designated
> >>
> >>  include/uapi/linux/if_link.h |    1 +
> >>  net/bridge/br_device.c       |   52 +++++++++++++++++++++++++++++++++++++++++-
> >>  net/bridge/br_fdb.c          |    6 +++++
> >>  net/bridge/br_if.c           |   24 +++++++++++++++----
> >>  net/bridge/br_netlink.c      |   13 ++++++++++
> >>  net/bridge/br_private.h      |    3 ++
> >>  net/bridge/br_sysfs_br.c     |   17 +++++++++++++
> >>  net/bridge/br_sysfs_if.c     |   27 +++++++++++++++++++++
> >>  8 files changed, 137 insertions(+), 6 deletions(-)
> >>
> >>--
> >>1.7.7.6
> >>
> >>--
> >>To unsubscribe from this list: send the line "unsubscribe netdev" in
> >>the body of a message to majordomo at vger.kernel.org
> >>More majordomo info at  http://vger.kernel.org/majordomo-info.html