[Bridge] [PATCH] brcmfmac: drop Inter-Access Point Protocol packets by default

Arend van Spriel arend.vanspriel at broadcom.com
Wed Mar 14 12:58:20 UTC 2018


On 3/14/2018 12:01 PM, Rafał Miłecki wrote:
> From: Rafał Miłecki <rafal at milecki.pl>
>
> Testing brcmfmac with more recent firmwares resulted in AP interfaces
> not working in some specific setups. Debugging resulted in discovering
> support for IAPP in Broadcom's firmwares. This is an obsoleted standard
> and its implementation is something that:
> 1) Most people don't need / want to use
> 2) Can allow local DoS attacks
> 3) Breaks AP interfaces in some specific bridge setups
>
> To solve issues it can cause this commit modifies brcmfmac to drop IAPP
> packets. If affects:
> 1) Rx path: driver won't be sending these unwanted packets up.
> 2) Tx path: driver will reject packets that would trigger STA
>     disassociation perfromed by a firmware (possible local DoS attack).
>
> It appears there are some Broadcom's clients/users who care about this
> feature despite the drawbacks. They can switch it on by a newly added
> Kconfig option.

Thanks for taking this approach. Looks fine except for .... (see below)

Reviewed-by: Arend van Spriel <arend.vanspriel at broadcom.com>
> Signed-off-by: Rafał Miłecki <rafal at milecki.pl>
> ---
>   drivers/net/wireless/broadcom/brcm80211/Kconfig    | 20 +++++++++++
>   .../wireless/broadcom/brcm80211/brcmfmac/core.c    | 39 ++++++++++++++++++++++
>   2 files changed, 59 insertions(+)
>
> diff --git a/drivers/net/wireless/broadcom/brcm80211/Kconfig b/drivers/net/wireless/broadcom/brcm80211/Kconfig
> index 9d99eb42d917..876787ef991a 100644
> --- a/drivers/net/wireless/broadcom/brcm80211/Kconfig
> +++ b/drivers/net/wireless/broadcom/brcm80211/Kconfig
> @@ -68,6 +68,26 @@ config BRCMFMAC_PCIE
>   	  IEEE802.11ac embedded FullMAC WLAN driver. Say Y if you want to
>   	  use the driver for an PCIE wireless card.
>
> +config BRCMFMAC_IAPP
> +	bool "Partial support for obsoleted Inter-Access Point Protocol"
> +	depends on BRCMFMAC
> +	---help---
> +	  Most of Broadcom's firmwares can send 802.11f ADD frame every
> +	  time new STA connects to the AP interface. Some recent ones
> +	  can also disassociate STA when they receive such a frame.

I do not see any evidence that this would occur only for recent 
firmware. That stuff is old and not touched recently.

> diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
> index 19048526b4af..db6987015fb1 100644
> --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
> +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c

[...]

>   static netdev_tx_t brcmf_netdev_start_xmit(struct sk_buff *skb,
>   					   struct net_device *ndev)
>   {
> @@ -250,6 +278,12 @@ static netdev_tx_t brcmf_netdev_start_xmit(struct sk_buff *skb,
>   		goto done;
>   	}
>
> +	if (!IS_ENABLED(CONFIG_BRCMFMAC_IAPP) && brcmf_skb_is_iapp(skb)) {
> +		dev_kfree_skb(skb);
> +		ret = -EINVAL;
> +		goto done;
> +	}

This is not right. The function must return netdev_tx_t type. Here is 
kerneldoc of .start_xmit():

  * netdev_tx_t (*ndo_start_xmit)(struct sk_buff *skb,
  *                               struct net_device *dev);
  *	Called when a packet needs to be transmitted.
  *	Returns NETDEV_TX_OK.  Can return NETDEV_TX_BUSY, but you should stop
  *	the queue before that can happen; it's for obsolete devices and weird
  *	corner cases, but the stack really does a non-trivial amount
  *	of useless work if you return NETDEV_TX_BUSY.
  *	Required; cannot be NULL.

You may want to increase dropped netstat or add driver internal 
statistic counter so there is visibility of IAPP packets being dropped.

Regards,
Arend


More information about the Bridge mailing list