[Bridge] [PATCH] net: bridge: Allow bridge to joing multicast groups

Allan W. Nielsen allan.nielsen at microchip.com
Tue Jul 30 11:23:08 UTC 2019


The 07/30/2019 12:55, Nikolay Aleksandrov wrote:
> On 30/07/2019 12:21, Allan W. Nielsen wrote:
> > The 07/30/2019 11:58, Nikolay Aleksandrov wrote:
> >> On 30/07/2019 11:30, Allan W. Nielsen wrote:
> >>> The 07/30/2019 10:06, Ido Schimmel wrote:
> >>>> On Tue, Jul 30, 2019 at 08:27:22AM +0200, Allan W. Nielsen wrote:
> >>>>> The 07/29/2019 20:51, Ido Schimmel wrote:
> >>>>>> Can you please clarify what you're trying to achieve? I just read the
> >>>>>> thread again and my impression is that you're trying to locally receive
> >>>>>> packets with a certain link layer multicast address.
> >>>>> Yes. The thread is also a bit confusing because we half way through realized
> >>>>> that we misunderstood how the multicast packets should be handled (sorry about
> >>>>> that). To begin with we had a driver where multicast packets was only copied to
> >>>>> the CPU if someone needed it. Andrew and Nikolay made us aware that this is not
> >>>>> how other drivers are doing it, so we changed the driver to include the CPU in
> >>>>> the default multicast flood-mask.
> >>>> OK, so what prevents you from removing all other ports from the
> >>>> flood-mask and letting the CPU handle the flooding? Then you can install
> >>>> software tc filters to limit the flooding.
> >>> I do not have the bandwidth to forward the multicast traffic in the CPU.
> >>>
> >>> It will also cause enormous latency on the forwarding of L2 multicast packets.
> >>>
> >>>>> This changes the objective a bit. To begin with we needed to get more packets to
> >>>>> the CPU (which could have been done using tc ingress rules and a trap action).
> >>>>>
> >>>>> Now after we changed the driver, we realized that we need something to limit the
> >>>>> flooding of certain L2 multicast packets. This is the new problem we are trying
> >>>>> to solve!
> >>>>>
> >>>>> Example: Say we have a bridge with 4 slave interfaces, then we want to install a
> >>>>> forwarding rule saying that packets to a given L2-multicast MAC address, should
> >>>>> only be flooded to 2 of the 4 ports.
> >>>>>
> >>>>> (instead of adding rules to get certain packets to the CPU, we are now adding
> >>>>> other rules to prevent other packets from going to the CPU and other ports where
> >>>>> they are not needed/wanted).
> >>>>>
> >>>>> This is exactly the same thing as IGMP snooping does dynamically, but only for
> >>>>> IP multicast.
> >>>>>
> >>>>> The "bridge mdb" allow users to manually/static add/del a port to a multicast
> >>>>> group, but still it operates on IP multicast address (not L2 multicast
> >>>>> addresses).
> >>>>>
> >>>>>> Nik suggested SIOCADDMULTI.
> >>>>> It is not clear to me how this should be used to limit the flooding, maybe we
> >>>>> can make some hacks, but as far as I understand the intend of this is maintain
> >>>>> the list of addresses an interface should receive. I'm not sure this should
> >>>>> influence how for forwarding decisions are being made.
> >>>>>
> >>>>>> and I suggested a tc filter to get the packet to the CPU.
> >>>>> The TC solution is a good solution to the original problem where wanted to copy
> >>>>> more frames to the CPU. But we were convinced that this is not the right
> >>>>> approach, and that the CPU by default should receive all multicast packets, and
> >>>>> we should instead try to find a way to limit the flooding of certain frames as
> >>>>> an optimization.
> >>>>
> >>>> This can still work. In Linux, ingress tc filters are executed before the
> >>>> bridge's Rx handler. The same happens in every sane HW. Ingress ACL is
> >>>> performed before L2 forwarding. Assuming you have eth0-eth3 bridged and
> >>>> you want to prevent packets with DMAC 01:21:6C:00:00:01 from egressing
> >>>> eth2:
> >>>>
> >>>> # tc filter add dev eth0 ingress pref 1 flower skip_sw \
> >>>> 	dst_mac 01:21:6C:00:00:01 action trap
> >>>> # tc filter add dev eth2 egress pref 1 flower skip_hw \
> >>>> 	dst_mac 01:21:6C:00:00:01 action drop
> >>>>
> >>>> The first filter is only present in HW ('skip_sw') and should result in
> >>>> your HW passing you the sole copy of the packet.
> >>> Agree.
> >>>
> >>>> The second filter is only present in SW ('skip_hw', not using HW egress
> >>>> ACL that you don't have) and drops the packet after it was flooded by
> >>>> the SW bridge.
> >>> Agree.
> >>>
> >>>> As I mentioned earlier, you can install the filter once in your HW and
> >>>> share it between different ports using a shared block. This means you
> >>>> only consume one TCAM entry.
> >>>>
> >>>> Note that this allows you to keep flooding all other multicast packets
> >>>> in HW.
> >>> Yes, but the frames we want to limit the flood-mask on are the exact frames
> >>> which occurs at a very high rate, and where latency is important.
> >>>
> >>> I really do not consider it as an option to forward this in SW, when it is
> >>> something that can easily be offloaded in HW.
> >>>
> >>>>>> If you now want to limit the ports to which this packet is flooded, then
> >>>>>> you can use tc filters in *software*:
> >>>>>>
> >>>>>> # tc qdisc add dev eth2 clsact
> >>>>>> # tc filter add dev eth2 egress pref 1 flower skip_hw \
> >>>>>> 	dst_mac 01:21:6C:00:00:01 action drop
> >>>>> Yes. This can work in the SW bridge.
> >>>>>
> >>>>>> If you want to forward the packet in hardware and locally receive it,
> >>>>>> you can chain several mirred action and then a trap action.
> >>>>> I'm not I fully understand how this should be done, but it does sound like it
> >>>>> becomes quite complicated. Also, as far as I understand it will mean that we
> >>>>> will be using TCAM/ACL resources to do something that could have been done with
> >>>>> a simple MAC entry.
> >>>>>
> >>>>>> Both options avoid HW egress ACLs which your design does not support.
> >>>>> True, but what is wrong with expanding the functionality of the normal
> >>>>> forwarding/MAC operations to allow multiple destinations?
> >>>>>
> >>>>> It is not an uncommon feature (I just browsed the manual of some common L2
> >>>>> switches and they all has this feature).
> >>>>>
> >>>>> It seems to fit nicely into the existing user-interface:
> >>>>>
> >>>>> bridge fdb add    01:21:6C:00:00:01 port eth0
> >>>>> bridge fdb append 01:21:6C:00:00:01 port eth1
> >>>>
> >>>> Wouldn't it be better to instead extend the MDB entries so that they are
> >>>> either keyed by IP or MAC? I believe FDB should remain as unicast-only.
> >>>
> >>> You might be right, it was not clear to me which of the two would fit the
> >>> purpose best.
> >>>
> >>> From a user-space iproute2 perspective I prefer using the "bridge fdb" command
> >>> as it already supports the needed syntax, and I do not think it will be too
> >>> pretty if we squeeze this into the "bridge mdb" command syntax.
> >>>
> >>
> >> MDB is a much better fit as Ido already suggested. FDB should remain unicast
> >> and mixing them is not a good idea, we already have a good ucast/mcast separation
> >> and we'd like to keep it that way.
> > Okay. We will explore that option.
> > 
> > 
> Great, thanks.
> 
> >>> But that does not mean that it need to go into the FDB database in the
> >>> implementation.
> >>>
> >>> Last evening when I looked at it again, I was considering keeping the
> >>> net_bridge_fdb_entry structure as is, and add a new hashtable with the
> >>> following:
> >>>
> >>> struct net_bridge_fdbmc_entry {
> >>> 	struct rhash_head		rhnode;
> >>> 	struct net_bridge_fdbmc_ports   *dst;
> >>>
> >>> 	struct net_bridge_fdb_key	key;
> >>> 	struct hlist_node		fdb_node;
> >>> 	unsigned char			offloaded:1;
> >>>
> >>> 	struct rcu_head			rcu;
> >>> };
> >>>
> >>
> >> What would the notification for this look like ?
> > Not sure. But we will change the direction and use the MDB structures instead.
> > 
> 
> Ack
> 
> >>> If we go with this approach then we can look at the MAC address and see if it is
> >>> a unicast which will cause a lookup in the fdb, l3-multicast (33:33:* or
> >>> 01:00:5e:*) which will cause a lookup in the mdb, or finally a fdbmc which will
> >>> need to do a lookup in this new hashtable.
> >>
> >> That sounds wrong, you will change the current default behaviour of flooding these
> >> packets. This will have to be well hidden behind a new option and enabled only on user
> >> request.
> > It will only affect users who install a static L2-multicast entry. If no entry
> > is found, it will default to flooding, which will be the same as before.
> > 
> 
> Ack
> 
> >>> Alternative it would be like this:
> >>>
> >>> struct net_bridge_fdb_entry {
> >>> 	struct rhash_head		rhnode;
> >>> 	union net_bridge_port_or_list	*dst;
> >>>
> >>> 	struct net_bridge_fdb_key	key;
> >>> 	struct hlist_node		fdb_node;
> >>> 	unsigned char			is_local:1,
> >>> 					is_static:1,
> >>> 					is_sticky:1,
> >>> 					added_by_user:1,
> >>> 					added_by_external_learn:1,
> >>> 					offloaded:1;
> >>> 					multi_dst:1;
> >>>
> >>> 	/* write-heavy members should not affect lookups */
> >>> 	unsigned long			updated ____cacheline_aligned_in_smp;
> >>> 	unsigned long			used;
> >>>
> >>> 	struct rcu_head			rcu;
> >>> };
> >>>
> >>> Both solutions should require fairly few changes, and should not cause any
> >>> measurable performance hit.
> >>>
> >>
> >> You'll have to convert these bits to use the proper atomic bitops if you go with
> >> the second solution. That has to be done even today, but the second case would
> >> make it a must.
> > Good to know.
> > 
> > Just for my understanding, is this because this is the "current" guide lines on
> > how things should be done, or is this because the multi_dst as a special need.
> > 
> > The multi_dst flag will never be changed in the life-cycle of the structure, and
> > the structure is protected by rcu. If this is causeing a raise, then I do not
> > see it.
> > 
> 
> These flags are changed from different contexts without any locking and you can end
> up with wrong values since these are not atomic ops. We need to move to atomic ops
> to guarantee consistent results. It is not only multi_dst issue, it's a problem
> for all of them, it's just not critical today since you'll end up with wrong
> flag values in such cases, but with multi_dst it will be important because the union
> pointer will have to be treated different based on the multi_dst value.
Okay, thanks for explaining.

> >>> Making it fit into the net_bridge_mdb_entry seems to be harder.
> >>>
> >>
> >> But it is the correct abstraction from bridge POV, so please stop trying to change
> >> the FDB code and try to keep to the multicast code.
> > We are planning on letting the net_bridge_port_or_list union use the
> > net_bridge_port_group structure, which will mean that we can re-use the
> > br_multicast_flood function (if we change the signatire to accept the ports
> > instead of the entry).
> > 
> 
> That sounds great, definitely a step in the right direction.
> 
> >>>> As a bonus, existing drivers could benefit from it, as MDB entries are already
> >>>> notified by MAC.
> >>> Not sure I follow. When FDB entries are added, it also generates notification
> >>> events.
> >>>
> >>
> >> Could you please show fdb event with multiple ports ?
> > We will get to that. Maybe this is an argument for converting to mdb. We have
> > not looked into the details of this yet.
> I can see a few potential problems, the important thing here would be to keep
> backwards compatibility.
Okay, good to be aware of

> >>>>> It seems that it can be added to the existing implementation with out adding
> >>>>> significant complexity.
> >>>>>
> >>>>> It will be easy to offload in HW.
> >>>>>
> >>>>> I do not believe that it will be a performance issue, if this is a concern then
> >>>>> we may have to do a bit of benchmarking, or we can make it a configuration
> >>>>> option.
> >>>>>
> >>>>> Long story short, we (Horatiu and I) learned a lot from the discussion here, and
> >>>>> I think we should try do a new patch with the learning we got. Then it is easier
> >>>>> to see what it actually means to the exiting code, complexity, exiting drivers,
> >>>>> performance, default behavioral, backwards compatibly, and other valid concerns.
> >>>>>
> >>>>> If the patch is no good, and cannot be fixed, then we will go back and look
> >>>>> further into alternative solutions.
> >>>> Overall, I tend to agree with Nik. I think your use case is too specific
> >>>> to justify the amount of changes you want to make in the bridge driver.
> >>>> We also provided other alternatives. That being said, you're more than
> >>>> welcome to send the patches and we can continue the discussion then.
> >>> Okay, good to know. I'm not sure I agree that the alternative solutions really
> >>> solves the issue this is trying to solve, nor do I agree that this is specific
> >>> to our needs.
> >>>
> >>> But lets take a look at a new patch, and see what is the amount of changes we
> >>> are talking about. Without having the patch it is really hard to know for sure.
> >> Please keep in mind that this case is the exception, not the norm, thus it should
> >> not under any circumstance affect the standard deployments.
> > Understood - no surprises.
> > 
> 
> Great, thanks again. Will continue discussing when the new patch arrives.
Sure, looking forward to that.

/Allan


More information about the Bridge mailing list