[Bugme-janitors] [Bug 7026] New: CD/DVD burning with USB writer doesn't work

bugme-daemon at bugzilla.kernel.org bugme-daemon at bugzilla.kernel.org
Fri Aug 18 18:12:29 PDT 2006


http://bugzilla.kernel.org/show_bug.cgi?id=7026

           Summary: CD/DVD burning with USB writer doesn't work
    Kernel Version: 2.6.17.8
            Status: NEW
          Severity: normal
             Owner: io_other at kernel-bugs.osdl.org
         Submitter: marc at marclanger.de


Most recent kernel where this bug did not occur: 2.6.13.2, perhaps 2.6.14/
2.6.15 (I found it broken since 2.6.16)

Distribution: Debian Unstable

Hardware Environment: i686, USB Mass Storage Device Genesyslogic 001600016303
Software Environment: cdrecord (newest released version), Nero Linux
Problem Description: cdrecord cannot burn, error message:

Cannot allocate memory. write_g1: scsi sendcmd: no error
CDB:  2A 00 00 00 00 00 00 00 1B 00
status: 0x0 (GOOD STATUS)
cmd finished after 0.000s timeout 200s
cdrecord: A write error occured.

Nero simply complains about an unknown burn error without details.

# lsusb
Bus 005 Device 001: ID 0000:0000
Bus 004 Device 001: ID 0000:0000
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 006: ID 05e3:0701 Genesys Logic, Inc. USB 2.0 IDE Adapter
Bus 001 Device 001: ID 0000:0000

# dmesg | grep usb
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.17.8 ehci_hcd
usb usb1: SerialNumber: 0000:00:10.4
usb usb1: uevent
usb usb1: configuration #1 chosen from 1 choice
usb usb1: adding 1-0:1.0 (config #1, interface 0)
usb 1-0:1.0: uevent
hub 1-0:1.0: usb_probe_interface
hub 1-0:1.0: usb_probe_interface - got id
hub 1-0:1.0: no power switching (usb 1.0)
drivers/usb/core/inode.c: creating file '001'
drivers/usb/core/inode.c: creating file '002'
usb usb2: default language 0x0409
usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.17.8 uhci_hcd
usb usb2: SerialNumber: 0000:00:10.0
usb usb2: uevent
usb usb2: configuration #1 chosen from 1 choice
usb usb2: adding 2-0:1.0 (config #1, interface 0)
usb 2-0:1.0: uevent
hub 2-0:1.0: usb_probe_interface
hub 2-0:1.0: usb_probe_interface - got id
hub 2-0:1.0: no power switching (usb 1.0)
drivers/usb/core/inode.c: creating file '001'
drivers/usb/core/inode.c: creating file '003'
usb usb3: default language 0x0409
usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.17.8 uhci_hcd
usb usb3: SerialNumber: 0000:00:10.1
usb usb3: uevent
usb usb3: configuration #1 chosen from 1 choice
usb usb3: adding 3-0:1.0 (config #1, interface 0)
usb 3-0:1.0: uevent
hub 3-0:1.0: usb_probe_interface
hub 3-0:1.0: usb_probe_interface - got id
hub 3-0:1.0: no power switching (usb 1.0)
drivers/usb/core/inode.c: creating file '001'
drivers/usb/core/inode.c: creating file '004'
usb usb4: default language 0x0409
usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.17.8 uhci_hcd
usb usb4: SerialNumber: 0000:00:10.2
usb usb4: uevent
usb usb4: configuration #1 chosen from 1 choice
usb usb4: adding 4-0:1.0 (config #1, interface 0)
usb 4-0:1.0: uevent
hub 4-0:1.0: usb_probe_interface
hub 4-0:1.0: usb_probe_interface - got id
hub 4-0:1.0: no power switching (usb 1.0)
usb 1-5: new high speed USB device using ehci_hcd and address 2
drivers/usb/core/inode.c: creating file '001'
drivers/usb/core/inode.c: creating file '005'
usb usb5: default language 0x0409
usb usb5: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.17.8 uhci_hcd
usb usb5: SerialNumber: 0000:00:10.3
usb usb5: uevent
usb usb5: configuration #1 chosen from 1 choice
usb usb5: adding 5-0:1.0 (config #1, interface 0)
usb 5-0:1.0: uevent
hub 5-0:1.0: usb_probe_interface
hub 5-0:1.0: usb_probe_interface - got id
hub 5-0:1.0: no power switching (usb 1.0)
usb 1-5: device descriptor read/64, error -32
drivers/usb/core/inode.c: creating file '001'
usb 1-5: device descriptor read/64, error -32
usb 1-5: new high speed USB device using ehci_hcd and address 3
usb 1-5: device descriptor read/64, error -32
usb 1-5: device descriptor read/64, error -32
usb 1-5: new high speed USB device using ehci_hcd and address 4
usb 1-5: device not accepting address 4, error -32
usb 1-5: new high speed USB device using ehci_hcd and address 5
usb 1-5: device not accepting address 5, error -32
usb 1-8: new high speed USB device using ehci_hcd and address 6
usb 1-8: default language 0x0409
usb 1-8: new device strings: Mfr=2, Product=3, SerialNumber=4
usb 1-8: Product: USB Mass Storage Device
usb 1-8: Manufacturer: Genesyslogic
usb 1-8: SerialNumber: 001600016303
usb 1-8: uevent
usb 1-8: configuration #1 chosen from 1 choice
usb 1-8: adding 1-8:1.0 (config #1, interface 0)
usb 1-8:1.0: uevent
usb-storage 1-8:1.0: usb_probe_interface
usb-storage 1-8:1.0: usb_probe_interface - got id
usb-storage: device found at 6
usb-storage: waiting for device to settle before scanning
usbcore: registered new driver usb-storage
usb-storage: device scan complete

------- You are receiving this mail because: -------
You are the assignee for the bug, or are watching the assignee.



More information about the Bugme-janitors mailing list