[Bugme-new] [Bug 4329] New: USB-HDD were not recognized
bugme-daemon at osdl.org
bugme-daemon at osdl.org
Fri Mar 11 12:56:53 PST 2005
http://bugme.osdl.org/show_bug.cgi?id=4329
Summary: USB-HDD were not recognized
Kernel Version: 2.6.10
Status: NEW
Severity: normal
Owner: greg at kroah.com
Submitter: f.hammer at web.de
Distribution:
Gentoo Linux
Hardware Environment:
Processor: P4(HT) 3.2 Ghz
USB-Port: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller
Manufacturer: Linux 2.6.10 ehci_hcd
Serial Number: 0000:00:1d.7
Speed: 480Mb/s (high)
Number of Ports: 8
Bandwidth allocated: 0 / 800 (0%)
Total number of interrupt requests: 0
Total number of isochronous requests: 0
USB Version: 2.00
Device Class: 09(hub )
Device Subclass: 00
Device Protocol: 01
Maximum Default Endpoint Size: 8
USB-HDD:
There are a lot of Chips on the Board of the USB-HDD-Case:
ATMEL AT49BV512
PL-3507 04484c
HDD: Maxtor 120GB ATA133
Software Environment:
Hotplug
Problem Description:
I tried to connect the HDD to my PC. When i plug in i get this message:
usb 5-7: new high speed USB device using ehci_hcd and address 6
usb 5-7: device descriptor read/64, error -71
usb 5-7: device descriptor read/64, error -71
usb 5-7: new high speed USB device using ehci_hcd and address 7
usb 5-7: device descriptor read/64, error -71
usb 5-7: device descriptor read/64, error -71
Steps to reproduce:
plug in the device and type dmesg
------- You are receiving this mail because: -------
You are on the CC list for the bug, or are watching someone who is.
More information about the Bugme-new
mailing list