[Bugme-new] [Bug 4341] New: Accessing Palm over USB in drive mode
fails
bugme-daemon at osdl.org
bugme-daemon at osdl.org
Tue Mar 15 00:39:00 PST 2005
http://bugme.osdl.org/show_bug.cgi?id=4341
Summary: Accessing Palm over USB in drive mode fails
Kernel Version: 2.6.11.3
Status: NEW
Severity: normal
Owner: greg at kroah.com
Submitter: e9525103 at stud4.tuwien.ac.at
Distribution:
Debian sid with self compiled kernel 2.6.11.3. Compiled with gcc-3.3.5.
Hardware Environment:
CPU: mobile Athlon XP 1800+
Mainboard: ABit NF7S V2.0
lspci -v output:
0000:00:00.0 Host bridge: nVidia Corporation nForce2 AGP (different version?)
(rev c1)
Subsystem: ABIT Computer Corp.: Unknown device 1c00
Flags: bus master, 66MHz, fast devsel, latency 0
Memory at d0000000 (32-bit, prefetchable) [size=64M]
Capabilities: [40] AGP version 2.0
Capabilities: [60] #08 [2001]
0000:00:00.1 RAM memory: nVidia Corporation nForce2 Memory Controller 1 (rev c1)
Subsystem: nVidia Corporation: Unknown device 0c17
Flags: 66MHz, fast devsel
0000:00:00.2 RAM memory: nVidia Corporation nForce2 Memory Controller 4 (rev c1)
Subsystem: nVidia Corporation: Unknown device 0c17
Flags: 66MHz, fast devsel
0000:00:00.3 RAM memory: nVidia Corporation nForce2 Memory Controller 3 (rev c1)
Subsystem: nVidia Corporation: Unknown device 0c17
Flags: 66MHz, fast devsel
0000:00:00.4 RAM memory: nVidia Corporation nForce2 Memory Controller 2 (rev c1)
Subsystem: nVidia Corporation: Unknown device 0c17
Flags: 66MHz, fast devsel
0000:00:00.5 RAM memory: nVidia Corporation nForce2 Memory Controller 5 (rev c1)
Subsystem: nVidia Corporation: Unknown device 0c17
Flags: 66MHz, fast devsel
0000:00:01.0 ISA bridge: nVidia Corporation nForce2 ISA Bridge (rev a4)
Subsystem: ABIT Computer Corp.: Unknown device 1c00
Flags: bus master, 66MHz, fast devsel, latency 0
Capabilities: [48] #08 [01e1]
0000:00:01.1 SMBus: nVidia Corporation nForce2 SMBus (MCP) (rev a2)
Subsystem: ABIT Computer Corp.: Unknown device 1c00
Flags: 66MHz, fast devsel, IRQ 10
I/O ports at c400 [size=32]
Capabilities: [44] Power Management version 2
0000:00:02.0 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4)
(prog-if 10 [OHCI])
Subsystem: ABIT Computer Corp.: Unknown device 1c00
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 22
Memory at e1087000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
0000:00:02.1 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4)
(prog-if 10 [OHCI])
Subsystem: ABIT Computer Corp.: Unknown device 1c00
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 21
Memory at e1082000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
0000:00:02.2 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4)
(prog-if 20 [EHCI])
Subsystem: ABIT Computer Corp.: Unknown device 1c00
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 20
Memory at e1083000 (32-bit, non-prefetchable) [size=256]
Capabilities: [44] #0a [2080]
Capabilities: [80] Power Management version 2
0000:00:04.0 Ethernet controller: nVidia Corporation nForce2 Ethernet Controller
(rev a1)
Subsystem: ABIT Computer Corp.: Unknown device 1c00
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 22
Memory at e1086000 (32-bit, non-prefetchable) [size=4K]
I/O ports at b000 [size=8]
Capabilities: [44] Power Management version 2
0000:00:05.0 Multimedia audio controller: nVidia Corporation nForce MultiMedia
audio [Via VT82C686B] (rev a2)
Subsystem: ABIT Computer Corp.: Unknown device 1c00
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 5
Memory at e1000000 (32-bit, non-prefetchable) [size=512K]
Capabilities: [44] Power Management version 2
0000:00:06.0 Multimedia audio controller: nVidia Corporation nForce2 AC97 Audio
Controler (MCP) (rev a1)
Subsystem: ABIT Computer Corp.: Unknown device 1c00
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 21
I/O ports at b400 [size=256]
I/O ports at b800 [size=128]
Memory at e1080000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
0000:00:08.0 PCI bridge: nVidia Corporation nForce2 External PCI Bridge (rev a3)
(prog-if 00 [Normal decode])
Flags: bus master, 66MHz, fast devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 00009000-0000afff
Memory behind bridge: df000000-e0ffffff
Prefetchable memory behind bridge: dc000000-dcffffff
0000:00:09.0 IDE interface: nVidia Corporation nForce2 IDE (rev a2) (prog-if 8a
[Master SecP PriP])
Subsystem: ABIT Computer Corp.: Unknown device 1c00
Flags: bus master, 66MHz, fast devsel, latency 0
I/O ports at f000 [size=16]
Capabilities: [44] Power Management version 2
0000:00:0d.0 FireWire (IEEE 1394): nVidia Corporation nForce2 FireWire (IEEE
1394) Controller (rev a3) (prog-if 10 [OHCI])
Subsystem: ABIT Computer Corp.: Unknown device 1c00
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 10
Memory at e1084000 (32-bit, non-prefetchable) [size=2K]
Memory at e1085000 (32-bit, non-prefetchable) [size=64]
Capabilities: [44] Power Management version 2
0000:00:1e.0 PCI bridge: nVidia Corporation nForce2 AGP (rev c1) (prog-if 00
[Normal decode])
Flags: bus master, 66MHz, medium devsel, latency 32
Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
Memory behind bridge: dd000000-deffffff
Prefetchable memory behind bridge: d4000000-dbffffff
0000:01:07.0 Multimedia video controller: Brooktree Corporation Bt878 Video
Capture (rev 02)
Flags: bus master, medium devsel, latency 32, IRQ 19
Memory at dc000000 (32-bit, prefetchable) [size=4K]
0000:01:07.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture
(rev 02)
Flags: bus master, medium devsel, latency 32, IRQ 19
Memory at dc001000 (32-bit, prefetchable) [size=4K]
0000:01:0b.0 RAID bus controller: Silicon Image, Inc. (formerly CMD Technology
Inc) SiI 3112 [SATALink/SATARaid] Serial ATA Controller (rev 02)
Subsystem: Silicon Image, Inc. (formerly CMD Technology Inc) Asus A7N8X
Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 11
I/O ports at 9000 [size=8]
I/O ports at 9400 [size=4]
I/O ports at 9800 [size=8]
I/O ports at 9c00 [size=4]
I/O ports at a000 [size=16]
Memory at e0000000 (32-bit, non-prefetchable) [size=512]
Capabilities: [60] Power Management version 2
0000:02:00.0 VGA compatible controller: nVidia Corporation NV25 [GeForce4 Ti
4200] (rev a3) (prog-if 00 [VGA])
Flags: bus master, 66MHz, medium devsel, latency 248, IRQ 19
Memory at dd000000 (32-bit, non-prefetchable) [size=16M]
Memory at d4000000 (32-bit, prefetchable) [size=64M]
Memory at d8000000 (32-bit, prefetchable) [size=512K]
Capabilities: [60] Power Management version 2
Capabilities: [44] AGP version 2.0
Software Environment:
Loaded drivers:
Module Size Used by
snd_seq_oss 35840 0
snd_seq_midi_event 8320 1 snd_seq_oss
snd_seq 55952 4 snd_seq_oss,snd_seq_midi_event
snd_seq_device 8972 2 snd_seq_oss,snd_seq
snd_pcm_oss 53792 0
snd_mixer_oss 20480 1 snd_pcm_oss
snd_bt87x 15432 0
snd_intel8x0 33856 2
snd_ac97_codec 77560 1 snd_intel8x0
snd_pcm 95880 4 snd_pcm_oss,snd_bt87x,snd_intel8x0,snd_ac97_codec
snd_timer 26500 2 snd_seq,snd_pcm
snd 57828 14
snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_bt87x,snd_intel8x0,snd_ac97_codec,snd_pcm,snd_timer
snd_page_alloc 10116 3 snd_bt87x,snd_intel8x0,snd_pcm
nvidia 3922428 12
8250_pnp 8704 0
8250 25252 1 8250_pnp
serial_core 23808 1 8250
forcedeth 19584 0
joydev 9792 0
binfmt_misc 12040 1
lp 11204 0
evdev 9472 0
parport_pc 41796 1
parport 37832 2 lp,parport_pc
autofs4 20356 2
usbhid 26880 0
nvidia_agp 7964 1
agpgart 35112 2 nvidia,nvidia_agp
3c59x 42152 0
mii 5248 1 3c59x
tuner 22948 0
tvaudio 23716 0
bttv 155216 0
firmware_class 10880 1 bttv
tveeprom 13336 1 bttv
video_buf 22404 1 bttv
v4l2_common 6016 1 bttv
btcx_risc 5000 1 bttv
w83627hf 30504 0
eeprom 7696 0
i2c_sensor 3840 2 w83627hf,eeprom
i2c_isa 2176 0
i2c_nforce2 6784 0
i2c_algo_bit 9992 1 bttv
i2c_core 23312 10
tuner,tvaudio,bttv,tveeprom,w83627hf,eeprom,i2c_sensor,i2c_isa,i2c_nforce2,i2c_algo_bit
videodev 10112 1 bttv
soundcore 10464 1 snd
thermal 13576 0
processor 23220 1 thermal
button 6800 0
usb_storage 71232 0
scsi_mod 95176 1 usb_storage
ehci_hcd 49544 0
ohci_hcd 36488 0
usbcore 138232 5 usbhid,usb_storage,ehci_hcd,ohci_hcd
ide_cd 41988 0
cdrom 41376 1 ide_cd
rtc 13496 0
Problem Description:
When I connect my Palm Tungsten T5 in USB drive mode no connection could be applied.
dmesg output:
hub 3-2:1.0: state 5 ports 4 chg 0000 evt 0004
hub 3-2:1.0: port 2, status 0101, change 0001, 12 Mb/s
hub 3-2:1.0: debounce: port 2: total 100ms stable 100ms status 0x101
hub 3-2:1.0: port 2 not reset yet, waiting 10ms
usb 3-2.2: new full speed USB device using ehci_hcd and address 8
hub 3-2:1.0: port 2 not reset yet, waiting 10ms
usb 3-2.2: device descriptor read/64, error -32
hub 3-2:1.0: port 2 not reset yet, waiting 10ms
usb 3-2.2: device descriptor read/64, error -32
hub 3-2:1.0: port 2 not reset yet, waiting 10ms
usb 3-2.2: new full speed USB device using ehci_hcd and address 9
hub 3-2:1.0: port 2 not reset yet, waiting 10ms
usb 3-2.2: device descriptor read/64, error -32
hub 3-2:1.0: port 2 not reset yet, waiting 10ms
usb 3-2.2: device descriptor read/64, error -32
hub 3-2:1.0: state 5 ports 4 chg 0000 evt 0004
hub 3-2:1.0: port 2, status 0100, change 0001, 12 Mb/s
hub 3-2:1.0: debounce: port 2: total 200ms stable 100ms status 0x101
hub 3-2:1.0: port 2 not reset yet, waiting 10ms
usb 3-2.2: new full speed USB device using ehci_hcd and address 10
hub 3-2:1.0: port 2 not reset yet, waiting 10ms
usb 3-2.2: device descriptor read/64, error -32
hub 3-2:1.0: port 2 not reset yet, waiting 10ms
usb 3-2.2: device descriptor read/64, error -32
hub 3-2:1.0: port 2 not reset yet, waiting 10ms
usb 3-2.2: new full speed USB device using ehci_hcd and address 11
hub 3-2:1.0: port 2 not reset yet, waiting 10ms
usb 3-2.2: device descriptor read/64, error -32
hub 3-2:1.0: port 2 not reset yet, waiting 10ms
usb 3-2.2: device descriptor read/64, error -32
hub 3-2:1.0: state 5 ports 4 chg 0000 evt 0004
hub 3-2:1.0: port 2, status 0100, change 0001, 12 Mb/s
hub 3-2:1.0: debounce: port 2: total 100ms stable 100ms status 0x100
hub 3-0:1.0: state 5 ports 6 chg 0000 evt 0002
ehci_hcd 0000:00:02.2: GetStatus port 1 status 001803 POWER sig=j CSC CONNECT
hub 3-0:1.0: port 1, status 0501, change 0001, 480 Mb/s
hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:02.2: port 1 full speed --> companion
ehci_hcd 0000:00:02.2: GetStatus port 1 status 003001 POWER OWNER sig=se0 CONNECT
ohci_hcd 0000:00:02.0: wakeup
hub 1-0:1.0: state 5 ports 3 chg 0000 evt 0002
ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [0] = 0x00010101 CSC PPS CCS
hub 1-0:1.0: port 1, status 0101, change 0001, 12 Mb/s
hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101
ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS
PES CCS
usb 1-1: new full speed USB device using ohci_hcd and address 3
ohci_hcd 0000:00:02.0: urb cbbccc60 path 1 ep0in 5ec20000 cc 5 --> status -110
ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS
PES CCS
usb 1-1: device descriptor read/64, error -110
ohci_hcd 0000:00:02.0: urb cbbccc60 path 1 ep0in 5ec20000 cc 5 --> status -110
ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS
PES CCS
usb 1-1: device descriptor read/64, error -110
ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS
PES CCS
usb 1-1: new full speed USB device using ohci_hcd and address 4
ohci_hcd 0000:00:02.0: urb cbbccc60 path 1 ep0in 5ec20000 cc 5 --> status -110
ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS
PES CCS
usb 1-1: device descriptor read/64, error -110
ohci_hcd 0000:00:02.0: urb cbbccc60 path 1 ep0in 5ec20000 cc 5 --> status -110
ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS
PES CCS
usb 1-1: device descriptor read/64, error -110
hub 1-0:1.0: state 5 ports 3 chg 0000 evt 0002
hub 3-0:1.0: state 5 ports 6 chg 0000 evt 0002
ehci_hcd 0000:00:02.2: GetStatus port 1 status 001002 POWER sig=se0 CSC
hub 3-0:1.0: port 1, status 0100, change 0001, 12 Mb/s
hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x100
hub 1-0:1.0: state 5 ports 3 chg 0000 evt 0002
ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [0] = 0x00010100 CSC PPS
hub 1-0:1.0: port 1, status 0100, change 0001, 12 Mb/s
hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x100
ohci_hcd 0000:00:02.0: suspend root hub
hub 3-0:1.0: state 5 ports 6 chg 0000 evt 0002
ehci_hcd 0000:00:02.2: GetStatus port 1 status 001803 POWER sig=j CSC CONNECT
hub 3-0:1.0: port 1, status 0501, change 0001, 480 Mb/s
hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:02.2: port 1 full speed --> companion
ehci_hcd 0000:00:02.2: GetStatus port 1 status 003001 POWER OWNER sig=se0 CONNECT
ohci_hcd 0000:00:02.0: wakeup
hub 1-0:1.0: state 5 ports 3 chg 0000 evt 0002
ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [0] = 0x00010101 CSC PPS CCS
hub 1-0:1.0: port 1, status 0101, change 0001, 12 Mb/s
hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101
ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS
PES CCS
usb 1-1: new full speed USB device using ohci_hcd and address 5
ohci_hcd 0000:00:02.0: urb cbbcca60 path 1 ep0in 5ec20000 cc 5 --> status -110
ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS
PES CCS
usb 1-1: device descriptor read/64, error -110
ohci_hcd 0000:00:02.0: urb cbbcca60 path 1 ep0in 5ec20000 cc 5 --> status -110
ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS
PES CCS
usb 1-1: device descriptor read/64, error -110
ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS
PES CCS
usb 1-1: new full speed USB device using ohci_hcd and address 6
ohci_hcd 0000:00:02.0: urb cbbcca60 path 1 ep0in 5ec20000 cc 5 --> status -110
ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS
PES CCS
usb 1-1: device descriptor read/64, error -110
ohci_hcd 0000:00:02.0: urb cbbcca60 path 1 ep0in 5ec20000 cc 5 --> status -110
ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS
PES CCS
usb 1-1: device descriptor read/64, error -110
hub 1-0:1.0: state 5 ports 3 chg 0000 evt 0002
hub 1-0:1.0: state 5 ports 3 chg 0000 evt 0002
ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [0] = 0x00010100 CSC PPS
hub 1-0:1.0: port 1, status 0100, change 0001, 12 Mb/s
hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x100
hub 3-0:1.0: state 5 ports 6 chg 0000 evt 0002
ehci_hcd 0000:00:02.2: GetStatus port 1 status 001002 POWER sig=se0 CSC
hub 3-0:1.0: port 1, status 0100, change 0001, 12 Mb/s
ohci_hcd 0000:00:02.0: suspend root hub
hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x100
hub 3-0:1.0: state 5 ports 6 chg 0000 evt 0002
ehci_hcd 0000:00:02.2: GetStatus port 1 status 001803 POWER sig=j CSC CONNECT
hub 3-0:1.0: port 1, status 0501, change 0001, 480 Mb/s
hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:02.2: port 1 full speed --> companion
ehci_hcd 0000:00:02.2: GetStatus port 1 status 003001 POWER OWNER sig=se0 CONNECT
ohci_hcd 0000:00:02.0: wakeup
hub 1-0:1.0: state 5 ports 3 chg 0000 evt 0002
ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [0] = 0x00010101 CSC PPS CCS
hub 1-0:1.0: port 1, status 0101, change 0001, 12 Mb/s
hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101
ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS
PES CCS
usb 1-1: new full speed USB device using ohci_hcd and address 7
ohci_hcd 0000:00:02.0: urb c829f860 path 1 ep0in 5ec20000 cc 5 --> status -110
ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS
PES CCS
usb 1-1: device descriptor read/64, error -110
ohci_hcd 0000:00:02.0: urb c829f860 path 1 ep0in 5ec20000 cc 5 --> status -110
ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS
PES CCS
usb 1-1: device descriptor read/64, error -110
ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS
PES CCS
usb 1-1: new full speed USB device using ohci_hcd and address 8
ohci_hcd 0000:00:02.0: urb c829f860 path 1 ep0in 5ec20000 cc 5 --> status -110
ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS
PES CCS
usb 1-1: device descriptor read/64, error -110
ohci_hcd 0000:00:02.0: urb c829f860 path 1 ep0in 5ec20000 cc 5 --> status -110
ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS
PES CCS
usb 1-1: device descriptor read/64, error -110
hub 1-0:1.0: state 5 ports 3 chg 0000 evt 0002
hub 3-0:1.0: state 5 ports 6 chg 0000 evt 0002
ehci_hcd 0000:00:02.2: GetStatus port 1 status 001002 POWER sig=se0 CSC
hub 3-0:1.0: port 1, status 0100, change 0001, 12 Mb/s
hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x100
hub 1-0:1.0: state 5 ports 3 chg 0000 evt 0002
ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [0] = 0x00010100 CSC PPS
hub 1-0:1.0: port 1, status 0100, change 0001, 12 Mb/s
hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x100
ohci_hcd 0000:00:02.0: suspend root hub
hub 3-0:1.0: state 5 ports 6 chg 0000 evt 0002
ehci_hcd 0000:00:02.2: GetStatus port 1 status 001803 POWER sig=j CSC CONNECT
hub 3-0:1.0: port 1, status 0501, change 0001, 480 Mb/s
hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:02.2: port 1 full speed --> companion
ehci_hcd 0000:00:02.2: GetStatus port 1 status 003001 POWER OWNER sig=se0 CONNECT
ohci_hcd 0000:00:02.0: wakeup
hub 1-0:1.0: state 5 ports 3 chg 0000 evt 0002
ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [0] = 0x00010101 CSC PPS CCS
hub 1-0:1.0: port 1, status 0101, change 0001, 12 Mb/s
hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101
ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS
PES CCS
usb 1-1: new full speed USB device using ohci_hcd and address 9
ohci_hcd 0000:00:02.0: urb c829f460 path 1 ep0in 5ec20000 cc 5 --> status -110
ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS
PES CCS
usb 1-1: device descriptor read/64, error -110
ohci_hcd 0000:00:02.0: urb c829f460 path 1 ep0in 5ec20000 cc 5 --> status -110
ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS
PES CCS
usb 1-1: device descriptor read/64, error -110
ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS
PES CCS
usb 1-1: new full speed USB device using ohci_hcd and address 10
ohci_hcd 0000:00:02.0: urb c829f460 path 1 ep0in 5ec20000 cc 5 --> status -110
ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS
PES CCS
usb 1-1: device descriptor read/64, error -110
ohci_hcd 0000:00:02.0: urb c829f460 path 1 ep0in 5ec20000 cc 5 --> status -110
ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS
PES CCS
usb 1-1: device descriptor read/64, error -110
hub 1-0:1.0: state 5 ports 3 chg 0000 evt 0002
hub 3-0:1.0: state 5 ports 6 chg 0000 evt 0002
ehci_hcd 0000:00:02.2: GetStatus port 1 status 001002 POWER sig=se0 CSC
hub 3-0:1.0: port 1, status 0100, change 0001, 12 Mb/s
hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x100
hub 1-0:1.0: state 5 ports 3 chg 0000 evt 0002
ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [0] = 0x00010100 CSC PPS
hub 1-0:1.0: port 1, status 0100, change 0001, 12 Mb/s
hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x100
hub 3-0:1.0: state 5 ports 6 chg 0000 evt 0002
ehci_hcd 0000:00:02.2: GetStatus port 1 status 001803 POWER sig=j CSC CONNECT
hub 3-0:1.0: port 1, status 0501, change 0001, 480 Mb/s
ohci_hcd 0000:00:02.0: suspend root hub
hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:02.2: port 1 full speed --> companion
ehci_hcd 0000:00:02.2: GetStatus port 1 status 003001 POWER OWNER sig=se0 CONNECT
ohci_hcd 0000:00:02.0: wakeup
hub 1-0:1.0: state 5 ports 3 chg 0000 evt 0002
ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [0] = 0x00010101 CSC PPS CCS
hub 1-0:1.0: port 1, status 0101, change 0001, 12 Mb/s
hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101
ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS
PES CCS
usb 1-1: new full speed USB device using ohci_hcd and address 11
ohci_hcd 0000:00:02.0: urb c829f6e0 path 1 ep0in 5ec20000 cc 5 --> status -110
ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS
PES CCS
usb 1-1: device descriptor read/64, error -110
ohci_hcd 0000:00:02.0: urb c829f6e0 path 1 ep0in 5ec20000 cc 5 --> status -110
ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS
PES CCS
usb 1-1: device descriptor read/64, error -110
ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS
PES CCS
usb 1-1: new full speed USB device using ohci_hcd and address 12
ohci_hcd 0000:00:02.0: urb c829f6e0 path 1 ep0in 5ec20000 cc 5 --> status -110
ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS
PES CCS
usb 1-1: device descriptor read/64, error -110
ohci_hcd 0000:00:02.0: urb c829f6e0 path 1 ep0in 5ec20000 cc 5 --> status -110
ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS
PES CCS
usb 1-1: device descriptor read/64, error -110
hub 1-0:1.0: state 5 ports 3 chg 0000 evt 0002
hub 3-0:1.0: state 5 ports 6 chg 0000 evt 0002
ehci_hcd 0000:00:02.2: GetStatus port 1 status 001002 POWER sig=se0 CSC
hub 3-0:1.0: port 1, status 0100, change 0001, 12 Mb/s
hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x100
hub 1-0:1.0: state 5 ports 3 chg 0000 evt 0002
ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [0] = 0x00010100 CSC PPS
hub 1-0:1.0: port 1, status 0100, change 0001, 12 Mb/s
hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x100
ohci_hcd 0000:00:02.0: suspend root hub
hub 3-0:1.0: state 5 ports 6 chg 0000 evt 0002
ehci_hcd 0000:00:02.2: GetStatus port 1 status 001803 POWER sig=j CSC CONNECT
hub 3-0:1.0: port 1, status 0501, change 0001, 480 Mb/s
hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:02.2: port 1 full speed --> companion
ehci_hcd 0000:00:02.2: GetStatus port 1 status 003001 POWER OWNER sig=se0 CONNECT
ohci_hcd 0000:00:02.0: wakeup
hub 1-0:1.0: state 5 ports 3 chg 0000 evt 0002
ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [0] = 0x00010101 CSC PPS CCS
hub 1-0:1.0: port 1, status 0101, change 0001, 12 Mb/s
hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101
ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS
PES CCS
usb 1-1: new full speed USB device using ohci_hcd and address 13
ohci_hcd 0000:00:02.0: urb c829f5e0 path 1 ep0in 5ec20000 cc 5 --> status -110
ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS
PES CCS
usb 1-1: device descriptor read/64, error -110
ohci_hcd 0000:00:02.0: urb c829f5e0 path 1 ep0in 5ec20000 cc 5 --> status -110
ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS
PES CCS
usb 1-1: device descriptor read/64, error -110
ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS
PES CCS
usb 1-1: new full speed USB device using ohci_hcd and address 14
ohci_hcd 0000:00:02.0: urb c829f5e0 path 1 ep0in 5ec20000 cc 5 --> status -110
ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS
PES CCS
usb 1-1: device descriptor read/64, error -110
ohci_hcd 0000:00:02.0: urb c829f5e0 path 1 ep0in 5ec20000 cc 5 --> status -110
ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS
PES CCS
usb 1-1: device descriptor read/64, error -110
hub 1-0:1.0: state 5 ports 3 chg 0000 evt 0002
------- You are receiving this mail because: -------
You are on the CC list for the bug, or are watching someone who is.
More information about the Bugme-new
mailing list