[Bugme-new] [Bug 9029] New: bcm43xx: Error: Microcode
"bcm43xx_microcode5.fw" not available or load failed.
bugme-daemon at bugzilla.kernel.org
bugme-daemon at bugzilla.kernel.org
Sun Sep 16 15:38:11 PDT 2007
http://bugzilla.kernel.org/show_bug.cgi?id=9029
Summary: bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not
available or load failed.
Product: Drivers
Version: 2.5
KernelVersion: 2.6.22.6
Platform: All
OS/Version: Linux
Tree: Mainline
Status: NEW
Severity: high
Priority: P1
Component: network-wireless
AssignedTo: drivers_network-wireless at kernel-bugs.osdl.org
ReportedBy: patrick.matthaei at web.de
Distribution:
Hardware Environment: HP Compaq 6715s notebook
Software Environment: 32 bit system
Problem Description:
Hello,
I get every few minutes following error messages in my kernel log:
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
bcm43xx: core_up for active 802.11 core failed (-2)
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
bcm43xx: core_up for active 802.11 core failed (-2)
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
bcm43xx: core_up for active 802.11 core failed (-2)
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
bcm43xx: core_up for active 802.11 core failed (-2)
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
bcm43xx: core_up for active 802.11 core failed (-2)
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
bcm43xx: core_up for active 802.11 core failed (-2)
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
bcm43xx: core_up for active 802.11 core failed (-2)
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
bcm43xx: core_up for active 802.11 core failed (-2)
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
bcm43xx: core_up for active 802.11 core failed (-2)
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
bcm43xx: core_up for active 802.11 core failed (-2)
Currently I'm not using wireless eth, so it's just loaded and inactive.
Output of lspci -vv:
30:00.0 Network controller: Broadcom Corporation BCM4310 UART (rev 02)
Subsystem: Hewlett-Packard Company Unknown device 1371
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 20
Region 0: Memory at c8000000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=2 PME-
Capabilities: [58] Vendor Specific Information
Capabilities: [e8] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0
Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [d0] Express Endpoint IRQ 0
Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag+
Device: Latency L0s <4us, L1 unlimited
Device: AtnBtn- AtnInd- PwrInd-
Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s, Port 0
Link: Latency L0s <4us, L1 <64us
Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
Link: Speed 2.5Gb/s, Width x1
Capabilities: [100] Advanced Error Reporting
Capabilities: [13c] Virtual Channel
Capabilities: [160] Device Serial Number 1a-00-6f-ff-ff-73-8e-57
Capabilities: [16c] Power Budgeting
Cheers.
--
Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are on the CC list for the bug, or are watching someone who is.
More information about the Bugme-new
mailing list