[Bugme-new] [Bug 10886] New: Hauppauge Nova-T 500 Dual DVB-T one tuner hangs / busy
bugme-daemon at bugzilla.kernel.org
bugme-daemon at bugzilla.kernel.org
Sat Jun 7 18:38:29 PDT 2008
http://bugzilla.kernel.org/show_bug.cgi?id=10886
Summary: Hauppauge Nova-T 500 Dual DVB-T one tuner hangs / busy
Product: v4l-dvb
Version: unspecified
KernelVersion: 2.6.25.4-8-default
Platform: All
OS/Version: Linux
Tree: Mainline
Status: NEW
Severity: high
Priority: P1
Component: dvb-usb
AssignedTo: v4l-dvb_dvb-usb at kernel-bugs.osdl.org
ReportedBy: o.wise.1 at bigpond.com
Latest working kernel version:2.6.25.4-8-default
Earliest failing kernel version:
Distribution: SuSE 11 rc1
Hardware Environment: Abit I-45CV motherboard Intel chipset
Software Environment:
Problem Description:
After cold boot get following message about card setup - all good.
david at linux-4azh:~> dmesg | grep -i dvb
dvb-usb: found a 'Hauppauge Nova-T 500 Dual DVB-T' in cold state, will try to
load a firmware
dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.10.fw'
dvb-usb: found a 'Hauppauge Nova-T 500 Dual DVB-T' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
DVB: registering new adapter (Hauppauge Nova-T 500 Dual DVB-T)
DVB: registering frontend 0 (DiBcom 3000MC/P)...
dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
DVB: registering new adapter (Hauppauge Nova-T 500 Dual DVB-T)
DVB: registering frontend 1 (DiBcom 3000MC/P)...
input: IR-receiver inside an USB DVB receiver as
/devices/pci0000:00/0000:00:1e.0/0000:03:06.2/usb6/6-1/input/input5
dvb-usb: schedule remote query interval to 150 msecs.
dvb-usb: Hauppauge Nova-T 500 Dual DVB-T successfully initialized and
connected.
usbcore: registered new interface driver dvb_usb_dib0700
Run Kaffine both tuners show OK and channel scan works as does TV. When I
shutdown Kaffine and later restart it I get device busy messages. A console
start of Kaffine shows following:
david at linux-4azh:~> kaffeine
/dev/dvb/adapter0/frontend0: Device or resource busy
/dev/dvb/adapter1/frontend0 : opened ( DiBcom 3000MC/P )
0 EPG plugins loaded for device 1:0.
Loaded epg data : 1652 events (21 msecs)
david at linux-4azh:~> Tuning to: ABC1 / autocount: 0
DvbCam::probe(): /dev/dvb/adapter1/ca0: : No such file or directory
Using DVB device 1:0 "DiBcom 3000MC/P"
tuning DVB-T to 226500000 Hz
inv:2 bw:1 fecH:3 fecL:9 mod:3 tm:1 gi:1 hier:0
.. LOCKED.
NOUT: 1
dvbEvents 1:0 started
Tuning delay: 678 ms
pipe opened
xine pipe opened /home/david/.kaxtv.ts
Asked to stop
pipe closed
Live stopped
dvbstream::run() end
dvbEvents 1:0 ended
fdDvr closed
Frontend closed
Saved epg data : 1652 events (45 msecs)
Adaptor0 being busy prevents Kaffine using the other
Steps to reproduce:
run Kaffine turn it off the run it again
--
Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are on the CC list for the bug, or are watching someone who is.
More information about the Bugme-new
mailing list