[Bugme-new] [Bug 10949] New: PCMCIA Card to RS232 don't work

[bugme-daemon at bugzilla.kernel.org]

http://bugzilla.kernel.org/show_bug.cgi?id=10949

           Summary: PCMCIA Card to RS232 don't work
           Product: Drivers
           Version: 2.5
     KernelVersion: 2.6.23
          Platform: All
        OS/Version: Linux
              Tree: Mainline
            Status: NEW
          Severity: normal
          Priority: P1
         Component: PCMCIA
        AssignedTo: linux-pcmcia at lists.infradead.org
        ReportedBy: johnrdoe63 at cregion.ru


Latest working kernel version:
Earliest failing kernel version:
Distribution: gentoo
Hardware Environment:
lspci - 04:06.0 CardBus bridge: Texas Instruments PCIxx12 Cardbus Controller
PCMCIA Card -
http://www.rovermate.com/site/accessories/home.nsf/descriptions/RMA19

Software Environment:
module-init-tools 3.4
pcmciautils-014
udev-115

Problem Description:
I try serial the modem, by means of the program minicom. At start on the modem
bulb TR (terminal ready) lights up and hangs on a line of initialization. At
initialization the line is entered: AT S7=45 S0=0 L1 V1 X4 &c1 E1 Q0, in the
answer should be OK. Then ATZ, in answer OK. At use of the built in modem, all
works.

Steps to reproduce:
1) run: minicom -o
2) choose: configuration and set serial device to the /dev/ttyS0
3) choose: init.


I modprob yenta_socket and insert PCMCIA Card:

lspci:
05:00.0 Serial controller: Oxford Semiconductor Ltd Unknown device 9505
05:00.1 Bridge: Oxford Semiconductor Ltd OX16PCI954 (Quad 16950 UART) function
0 (Disabled)

dmesg:
Yenta: CardBus bridge found at 0000:04:06.0 [1179:ff10]
Yenta: Enabling burst memory read transactions
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:04:06.0, mfunc 0x01a01b22, devctl 0x66
Yenta: ISA IRQ mask 0x0cf8, PCI irq 18
Socket status: 30000820
pcmcia: parent PCI bridge I/O window: 0x4000 - 0x4fff
cs: IO port probe 0x4000-0x4fff: clean.
pcmcia: parent PCI bridge Memory window: 0xdc000000 - 0xdc0fffff
pcmcia: parent PCI bridge Memory window: 0x68000000 - 0x6bffffff
pccard: CardBus card inserted into slot 0
PCI: Enabling device 0000:05:00.0 (0000 -> 0003)
ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 18 (level, low) -> IRQ 18
ttyS0: detected caps 00000700 should be 00000100
0000:05:00.0: ttyS0 at I/O 0x4460 (irq = 18) is a 16C950/954
ttyS1: detected caps 00000700 should be 00000100
0000:05:00.0: ttyS1 at I/O 0x4468 (irq = 18) is a 16C950/954
ttyS2: detected caps 00000700 should be 00000100
0000:05:00.0: ttyS2 at I/O 0x4470 (irq = 18) is a 16C950/954
ttyS3: detected caps 00000700 should be 00000100
0000:05:00.0: ttyS3 at I/O 0x4478 (irq = 18) is a 16C950/954

Why ttyS2,3 If interfaces only 2?


-- 
Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are on the CC list for the bug, or are watching someone who is.