[PATCHv1 0/8] CGroup Namespaces

Aditya Kali adityakali at google.com
Mon Oct 13 21:23:42 UTC 2014

Second take at the Cgroup Namespace patch-set.

Major changes form RFC (V0):
1. setns support for cgroupns
2. 'mount -t cgroup cgroup <mntpt>' from inside a cgroupns now
   mounts the cgroup hierarcy with cgroupns-root as the filesystem root.
3. writes to cgroup files outside of cgroupns-root are not allowed
4. visibility of /proc/<pid>/cgroup is further restricted by not showing
   anything if the <pid> is in a sibling cgroupns and its cgroup falls outside
   your cgroupns-root.

More details in the writeup below.

  Cgroups and Namespaces are used together to create “virtual”
  containers that isolates the host environment from the processes
  running in container. But since cgroups themselves are not
  “virtualized”, the task is always able to see global cgroups view
  through cgroupfs mount and via /proc/self/cgroup file.

  $ cat /proc/self/cgroup 

  This exposure of cgroup names to the processes running inside a
  container results in some problems:
  (1) The container names are typically host-container-management-agent
      (systemd, docker/libcontainer, etc.) data and leaking its name (or
      leaking the hierarchy) reveals too much information about the host
  (2) It makes the container migration across machines (CRIU) more
      difficult as the container names need to be unique across the
      machines in the migration domain.
  (3) It makes it difficult to run container management tools (like
      docker/libcontainer, lmctfy, etc.) within virtual containers
      without adding dependency on some state/agent present outside the

  Note that the feature proposed here is completely different than the
  “ns cgroup” feature which existed in the linux kernel until recently.
  The ns cgroup also attempted to connect cgroups and namespaces by
  creating a new cgroup every time a new namespace was created. It did
  not solve any of the above mentioned problems and was later dropped
  from the kernel. Incidentally though, it used the same config option
  name CONFIG_CGROUP_NS as used in my prototype!

Introducing CGroup Namespaces
  With unified cgroup hierarchy
  (Documentation/cgroups/unified-hierarchy.txt), the containers can now
  have a much more coherent cgroup view and its easy to associate a
  container with a single cgroup. This also allows us to virtualize the
  cgroup view for tasks inside the container.

  The new CGroup Namespace allows a process to “unshare” its cgroup
  hierarchy starting from the cgroup its currently in.
  For Ex:
  $ cat /proc/self/cgroup
  $ ls -l /proc/self/ns/cgroup
  lrwxrwxrwx 1 root root 0 2014-07-15 10:37 /proc/self/ns/cgroup -> cgroup:[4026531835]
  $ ~/unshare -c  # calls unshare(CLONE_NEWCGROUP) and exec’s /bin/bash
  [ns]$ ls -l /proc/self/ns/cgroup
  lrwxrwxrwx 1 root root 0 2014-07-15 10:35 /proc/self/ns/cgroup ->
  # From within new cgroupns, process sees that its in the root cgroup
  [ns]$ cat /proc/self/cgroup

  # From global cgroupns:
  $ cat /proc/<pid>/cgroup

  # Unshare cgroupns along with userns and mountns
  # Following calls unshare(CLONE_NEWCGROUP|CLONE_NEWUSER|CLONE_NEWNS), then
  # sets up uid/gid map and exec’s /bin/bash
  $ ~/unshare -c -u -m

  # Originally, we were in /batchjobs/c_job_id1 cgroup. Mount our own cgroup
  # hierarchy.
  [ns]$ mount -t cgroup cgroup /tmp/cgroup
  [ns]$ ls -l /tmp/cgroup
  total 0
  -r--r--r-- 1 root root 0 2014-10-13 09:32 cgroup.controllers
  -r--r--r-- 1 root root 0 2014-10-13 09:32 cgroup.populated
  -rw-r--r-- 1 root root 0 2014-10-13 09:25 cgroup.procs
  -rw-r--r-- 1 root root 0 2014-10-13 09:32 cgroup.subtree_control

  The cgroupns-root (/batchjobs/c_job_id1 in above example) becomes the
  filesystem root for the namespace specific cgroupfs mount.

  The virtualization of /proc/self/cgroup file combined with restricting
  the view of cgroup hierarchy by namespace-private cgroupfs mount
  should provide a completely isolated cgroup view inside the container.

  In its current form, the cgroup namespaces patcheset provides following

  (1) The “root” cgroup for a cgroup namespace is the cgroup in which
      the process calling unshare is running.
      For ex. if a process in /batchjobs/c_job_id1 cgroup calls unshare,
      cgroup /batchjobs/c_job_id1 becomes the cgroupns-root.
      For the init_cgroup_ns, this is the real root (“/”) cgroup
      (identified in code as cgrp_dfl_root.cgrp).

  (2) The cgroupns-root cgroup does not change even if the namespace
      creator process later moves to a different cgroup.
      $ ~/unshare -c # unshare cgroupns in some cgroup
      [ns]$ cat /proc/self/cgroup 
      [ns]$ mkdir sub_cgrp_1
      [ns]$ echo 0 > sub_cgrp_1/cgroup.procs
      [ns]$ cat /proc/self/cgroup 

  (3) Each process gets its CGROUPNS specific view of
  (a) Processes running inside the cgroup namespace will be able to see
      cgroup paths (in /proc/self/cgroup) only inside their root cgroup
      [ns]$ sleep 100000 &  # From within unshared cgroupns
      [1] 7353
      [ns]$ echo 7353 > sub_cgrp_1/cgroup.procs
      [ns]$ cat /proc/7353/cgroup

  (b) From global cgroupns, the real cgroup path will be visible:
      $ cat /proc/7353/cgroup

  (c) From a sibling cgroupns (cgroupns root-ed at a sibling cgroup), no cgroup
      path will be visible:
      # ns2's cgroupns-root is at '/batchjobs/c_job_id2'
      [ns2]$ cat /proc/7353/cgroup
      This is same as when cgroup hierarchy is not mounted at all.
      (In correct container setup though, it should not be possible to
       access PIDs in another container in the first place.)

  (4) Processes inside a cgroupns are not allowed to move out of the
      cgroupns-root. This is true even if a privileged process in global
      cgroupns tries to move the process out of its cgroupns-root.

      # From global cgroupns
      $ cat /proc/7353/cgroup
      # cgroupns-root for 7353 is /batchjobs/c_job_id1
      $ echo 7353 > batchjobs/c_job_id2/cgroup.procs
      -bash: echo: write error: Operation not permitted

  (5) Setns to another cgroup namespace is allowed only when:
      (a) process has CAP_SYS_ADMIN in its current userns
      (b) process has CAP_SYS_ADMIN in the target cgroupns' userns
      (c) the process's current cgroup is a descendant cgroupns-root of the
          target namespace.
      (d) the target cgroupns-root is descendant of current cgroupns-root..
      The last check (d) prevents processes from escaping their cgroupns-root by
      attaching to parent cgroupns. Thus, setns is allowed only when the process
      is trying to restrict itself to a deeper cgroup hierarchy.

  (6) When some thread from a multi-threaded process unshares its
      cgroup-namespace, the new cgroupns gets applied to the entire
      process (all the threads). This should be OK since
      unified-hierarchy only allows process-level containerization. So
      all the threads in the process will have the same cgroup. And both
      - changing cgroups and unsharing namespaces - are protected under

  (7) The cgroup namespace is alive as long as there is atleast 1
      process inside it. When the last process exits, the cgroup
      namespace is destroyed. The cgroupns-root and the actual cgroups
      remain though.

  (8) 'mount -t cgroup cgroup <mntpt>' when called from within cgroupns mounts
      the unified cgroup hierarchy with cgroupns-root as the filesystem root.
      The process needs CAP_SYS_ADMIN in its userns and mntns. This allows the
      container management tools to be run inside the containers transparently.

  The current patch-set is based on top of Tejun Heo's cgroup tree (for-next
  branch). Its fairly non-intrusive and provides above mentioned

Possible extensions of CGROUPNS:
  (1) The Documentation/cgroups/unified-hierarchy.txt mentions use of
      capabilities to restrict cgroups to administrative users. CGroup
      namespaces could be of help here. With cgroup namespaces, it might
      be possible to delegate administration of sub-cgroups under a
      cgroupns-root to the cgroupns owner.

 fs/kernfs/dir.c                  |  53 +++++++++---
 fs/kernfs/mount.c                |  48 +++++++++++
 fs/proc/namespaces.c             |   3 +
 include/linux/cgroup.h           |  41 +++++++++-
 include/linux/cgroup_namespace.h |  62 +++++++++++++++
 include/linux/kernfs.h           |   5 ++
 include/linux/nsproxy.h          |   2 +
 include/linux/proc_ns.h          |   4 +
 include/uapi/linux/sched.h       |   3 +-
 init/Kconfig                     |   9 +++
 kernel/Makefile                  |   1 +
 kernel/cgroup.c                  | 139 ++++++++++++++++++++++++++------
 kernel/cgroup_namespace.c        | 168 +++++++++++++++++++++++++++++++++++++++
 kernel/fork.c                    |   2 +-
 kernel/nsproxy.c                 |  19 ++++-
 15 files changed, 518 insertions(+), 41 deletions(-)
 create mode 100644 include/linux/cgroup_namespace.h
 create mode 100644 kernel/cgroup_namespace.c

[PATCHv1 1/8] kernfs: Add API to generate relative kernfs path
[PATCHv1 2/8] sched: new clone flag CLONE_NEWCGROUP for cgroup
[PATCHv1 3/8] cgroup: add function to get task's cgroup on default
[PATCHv1 4/8] cgroup: export cgroup_get() and cgroup_put()
[PATCHv1 5/8] cgroup: introduce cgroup namespaces
[PATCHv1 6/8] cgroup: restrict cgroup operations within task's cgroupns
[PATCHv1 7/8] cgroup: cgroup namespace setns support
[PATCHv1 8/8] cgroup: mount cgroupns-root when inside non-init cgroupns

More information about the Containers mailing list