[Fuego] Testing Fuego with QEMU
Viswambharan, Vibin (V.)
vvibin at visteon.com
Tue Sep 6 09:09:03 UTC 2016
Hi Tim
Thanks for the quick updates ,I checked the wiki today and could see the details you provided to setup with qemu-arm.
It looks like I can get there soon...
Btw , I subscribed myself to the mailing list prior to sending this query. However I haven't raised any confirmation link from the mailing admin for the subscription verification. I checked in my spam list as well but couldn't see anything from this list.
--Vibin
-----Original Message-----
From: Bird, Timothy [mailto:Tim.Bird at am.sony.com]
Sent: Saturday, September 03, 2016 12:25 AM
To: Viswambharan, Vibin (V.); fuego at lists.linuxfoundation.org
Cc: ltsi-dev at lists.linuxfoundation.org
Subject: RE: [Fuego] Testing Fuego with QEMU
First, let me say congratulations on finding the mailing list. I haven't even advertised it yet.
(As a side note, though, you should subscribe so that your e-mails are not moderated).
Thank you for your interest in Fuego.
I'll answer your questions inline below.
> -----Original Message-----
> From: fuego-bounces at lists.linuxfoundation.org [mailto:fuego-
> bounces at lists.linuxfoundation.org] On Behalf Of Viswambharan, Vibin
> (V.)
> Sent: Friday, September 02, 2016 7:24 AM
> To: fuego at lists.linuxfoundation.org
> Cc: Viswambharan, Vibin (V.) <vvibin at visteon.com>
> Subject: [Fuego] Testing Fuego with QEMU
>
> Hi
>
> Recently after going through multiple issues in getting the docker
> working properly in the proxy environment today I was able to see the
> Fuego web frontend in my web-browser. Thanks Feugo works out of the
> box seamlessly ,though had to go through some painful configurations
> with docker-machine and network setup , getting to forget after seeing
> the test setup screen from Fuego....
>
>
>
> Now I am stuck here , I can see the node selection provides me with a
> qemu- test-arm target. But its empty. How can I create a qemu-test-arm
> as a mock target and start verifying how the remote tests work. Is
> there is something helpful info to start on how to use qemu with
> Fuego. It QEMU available in docker container . I am not not an expert
> in networking and hence I struggle with all these thing when I am forced to make it work in the proxy environment.
> Can you please provide some guidance on this topic.
I'm pretty sure that the Cogent developers (who made this system originally) were testing with a qemu system setup from the Yocto Project.
I will try to add some documentation to the Fuego wiki today about how to set up a qemu environment that you can use for local testing. But if you don't want to wait for that to appear, try building a qemuarm image by following the instructions at:
http://www.yoctoproject.org/docs/2.1/yocto-project-qs/yocto-project-qs.html
Once the image is running (started with runqemu qemuarm), you may need to create the fuego home directory (/home/a) inside the image, and verify that the networking is working to the image, and that you can ssh to it from the host.
Double-check IPADDR, SSH_PORT, LOGIN and PASSWD in the fuego board file.
(in userdata/conf/boards/qemu-arm.board)
Sorry this is so cursory. I'll try to put more details on the wiki.
Good luck.
-- Tim
More information about the Fuego
mailing list