[Fuego] Benchmark.blobsallad test build failing on my x86 64-bit ubuntu pc

Daniel Sangorrin daniel.sangorrin at toshiba.co.jp
Mon Jun 26 00:17:38 UTC 2017


Hi Dhinakar,

Thanks for the feedback.

I think it's a problem that I have already fixed but not released yet.

Could you check if 
/fuego-rw/logs/Benchmark.blobsallad/Ethernet-TRAV-X86-Target.default.5.5/testlog.txt
exists?

The parser was assuming that if the test didn't even produce (probably because of [1]) a testlog.txt then 
there was nothing to parse. I will try to send a patch to fix this issue and others soon.

Thanks,
Daniel

[1] > Can't open display :0


> -----Original Message-----
> From: dhinakar k [mailto:dhinakar.k at gmail.com]
> Sent: Monday, June 26, 2017 5:33 AM
> To: Daniel Sangorrin
> Cc: fuego at lists.linuxfoundation.org
> Subject: Re: Benchmark.blobsallad test build failing on my x86 64-bit ubuntu pc
> 
> Hi Daniel,
> 
> 
> Thanks for the response.
> 
> I executed after deleting the log folder as you mentioned.
> 
> Please check the log below.
> 
> Any dependencies missing?
> 
> Please check the log and let me know.
> 
> 
> Regards,
> 
> Dhinakar
> 
> ##### doing fuego phase: build ########
> Unpacking blobsallad-src.tar.bz2
> gcc -g -Wall -I//usr/include -I//usr/include/cairo -I//usr/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT -c bs_main.c
> gcc -g -Wall -I//usr/include -I//usr/include/cairo -I//usr/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT -c bs_vector.c
> gcc -g -Wall -I//usr/include -I//usr/include/cairo -I//usr/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT -c bs_pointmass.c
> gcc -g -Wall -I//usr/include -I//usr/include/cairo -I//usr/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT -c bs_joint.c
> gcc -g -Wall -I//usr/include -I//usr/include/cairo -I//usr/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT -c bs_stick.c
> gcc -g -Wall -I//usr/include -I//usr/include/cairo -I//usr/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT -c bs_env.c
> gcc -g -Wall -I//usr/include -I//usr/include/cairo -I//usr/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT -c bs_array.c
> gcc -g -Wall -I//usr/include -I//usr/include/cairo -I//usr/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT -c bs_blob.c
> gcc -g -Wall -I//usr/include -I//usr/include/cairo -I//usr/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT -c bs_blob_collective.c
> gcc -g -Wall -I//usr/include -I//usr/include/cairo -I//usr/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT -c bs_cairo.c
> gcc -g -Wall -I//usr/include -I//usr/include/cairo -I//usr/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT -c bs_util.c
> gcc -g -Wall -I//usr/include -I//usr/include/cairo -I//usr/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT -c bs_list.c
> gcc -g -Wall -I//usr/include -I//usr/include/cairo -I//usr/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT -c bs_octree.c
> bs_octree.c:493:1: warning: 'bs_octree_draw_nodes' defined but not used [-Wunused-function]
>  bs_octree_draw_nodes(bs_octree_node_t *pNode,
>  ^
> gcc -g -Wall -I//usr/include -I//usr/include/cairo -I//usr/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT -c bs_vector_util.c
> gcc -g -Wall -I//usr/include -I//usr/include/cairo -I//usr/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT -c bs_profiler.c
> gcc -g -Wall -I//usr/include -I//usr/include/cairo -I//usr/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT -c bs_rubberband.c
> bs_rubberband.c: In function 'bs_rubberband_create':
> bs_rubberband.c:13:20: warning: unused variable 'p' [-Wunused-variable]
>    bs_int32_t i, j, p;
>                     ^
> bs_rubberband.c: In function 'bs_rubberband_sc':
> bs_rubberband.c:57:20: warning: unused variable 'k' [-Wunused-variable]
>    bs_int32_t i, j, k;
>                     ^
> gcc -g -o blobsallad bs_main.o bs_vector.o bs_pointmass.o bs_joint.o bs_stick.o bs_env.o bs_array.o bs_blob.o bs_blob_collective.o
> bs_cairo.o bs_util.o bs_list.o bs_octree.o bs_vector_util.o bs_profiler.o bs_rubberband.o -Wl,-rpath-link=//usr/lib -L//usr/lib -lcairo -
> lSDL -lpthread -lm
> Fuego test_build duration=6.51003742218 seconds
> ##### doing fuego phase: deploy ########
> ##### doing fuego phase: pre_deploy ########
> ##### doing fuego phase: test_deploy ########
> Warning: Permanently added '192.168.1.117' (ECDSA) to the list of known hosts.
> Warning: Permanently added '192.168.1.117' (ECDSA) to the list of known hosts.
> ##### doing fuego phase: post_deploy ########
> ##### doing fuego phase: run ########
> Warning: Permanently added '192.168.1.117' (ECDSA) to the list of known hosts.
> WARNING: test log file parameter empty, so will use default
> Warning: Permanently added '192.168.1.117' (ECDSA) to the list of known hosts.
> Warning: Permanently added '192.168.1.117' (ECDSA) to the list of known hosts.
> No protocol specified
> Can't open display :0
> Warning: Permanently added '192.168.1.117' (ECDSA) to the list of known hosts.
> Warning: Permanently added '192.168.1.117' (ECDSA) to the list of known hosts.
> ##### doing fuego phase: post_test ########
> Warning: Permanently added '192.168.1.117' (ECDSA) to the list of known hosts.
> Warning: Permanently added '192.168.1.117' (ECDSA) to the list of known hosts.
> Warning: Permanently added '192.168.1.117' (ECDSA) to the list of known hosts.
> Warning: Permanently added '192.168.1.117' (ECDSA) to the list of known hosts.
> Warning: Permanently added '192.168.1.117' (ECDSA) to the list of known hosts.
> Warning: Permanently added '192.168.1.117' (ECDSA) to the list of known hosts.
> Teardown board link
> ##### doing fuego phase: processing ########
> Going to check 1 fail cases for Ethernet-TRAV-X86-Target.default.Benchmark.blobsallad
> No fail cases detected for Ethernet-TRAV-X86-Target.default.Benchmark.blobsallad
> running python with PATH=/usr/local/bin:/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games
> Reading current values from /fuego-rw/logs/Benchmark.blobsallad/Ethernet-TRAV-X86-Target.default.5.5/testlog.txt
> 
> *** ABORTED ***
> 
> Fuego error reason: ERROR: problem while running the parser
> 
> Build was aborted
> Aborted by unknown <http://localhost:8080/fuego/user/unknown>
> Terminated
> [description-setter] Description set: <a href="/fuego/userContent/fuego.logs/Benchmark.blobsallad/Ethernet-TRAV-X86-
> Target.default.5.5/testlog.txt">log</a>
> Finished: ABORTED
> 
> On Fri, Jun 23, 2017 at 11:27 AM, Daniel Sangorrin <daniel.sangorrin at toshiba.co.jp <mailto:daniel.sangorrin at toshiba.co.jp> > wrote:
> 
> 
> 	Hi Dhinakar,
> 
> 	Sorry for the long delay.
> 
> 	Could you do the following and try again?
> 
> 	# rm -rf /fuego-rw/logs/Benchmark.blobsallad
> 
> 	Thanks,
> 	Daniel
> 
> 
> 	> -----Original Message-----
> 	> From: dhinakar k [mailto:dhinakar.k at gmail.com <mailto:dhinakar.k at gmail.com> ]
> 	> Sent: Friday, June 09, 2017 10:48 AM
> 	> To: Daniel Sangorrin
> 	> Cc: fuego at lists.linuxfoundation.org <mailto:fuego at lists.linuxfoundation.org>
> 	> Subject: RE: Benchmark.blobsallad test build failing on my x86 64-bit ubuntu pc
> 	>
> 	> Fine Daniel, thanks for the response.
> 	>
> 	> Regards,
> 	> Dhinakar
> 	>
> 	> On Jun 9, 2017 5:38 AM, "Daniel Sangorrin" <daniel.sangorrin at toshiba.co.jp <mailto:daniel.sangorrin at toshiba.co.jp>
> <mailto:daniel.sangorrin at toshiba.co.jp <mailto:daniel.sangorrin at toshiba.co.jp> > > wrote:
> 	>
> 	>
> 	>       Hi Dhinakar,
> 	>
> 	>       Sorry for the delay.
> 	>       Thanks for reporting. I will look at it when I have time (sorry, I'm busy at the moment).
> 	>
> 	>       Tim: how should we manage issues/bugs? I can't find the "issues" functionality
> 	>       that github provides on bitbucket.
> 	>
> 	>       Thanks,
> 	>       Daniel
> 	>
> 	>       > -----Original Message-----
> 	>       > From: dhinakar k [mailto:dhinakar.k at gmail.com <mailto:dhinakar.k at gmail.com>  <mailto:dhinakar.k at gmail.com
> <mailto:dhinakar.k at gmail.com> > ]
> 	>       > Sent: Tuesday, June 06, 2017 1:52 AM
> 	>       > To: Daniel Sangorrin
> 
> 	>       > Cc: fuego at lists.linuxfoundation.org <mailto:fuego at lists.linuxfoundation.org>
> <mailto:fuego at lists.linuxfoundation.org <mailto:fuego at lists.linuxfoundation.org> >
> 	>       > Subject: Re: Benchmark.blobsallad test build failing on my x86 64-bit ubuntu pc
> 	>       >
> 	>       > Hi Daniel,
> 	>       >
> 	>       >
> 	>       > It seems the parser has an issue. I posted in another thread about it.
> 	>       >
> 	>       > But thought of posting the error log here for your reference.
> 	>       >
> 	>       > Please check and confirm.
> 	>       >
> 	>       >
> 	>       > ##### doing fuego phase: processing ########
> 	>       > + processing
> 	>       > + local RETURN_VALUE=0
> 	>       > + call_if_present test_processing
> 	>       > + declare -f -F test_processing
> 	>       > + return 0
> 	>       > + '[' 0 -ne 0 ']'
> 	>       > + fail_check_cases
> 	>       > + testlog=/fuego-rw/logs/Benchmark.blobsallad/ubuntu-x86-target.default.3.3/testlog.txt
> 	>       > + slog_prefix=/fuego-rw/logs/Benchmark.blobsallad/ubuntu-x86-target.default.3.3/syslog
> 	>       > ++ tr . _
> 	>       > ++ echo BENCHMARK.BLOBSALLAD
> 	>       > + upName=BENCHMARK_BLOBSALLAD
> 	>       > + fcname=BENCHMARK_BLOBSALLAD_FAIL_CASE_COUNT
> 	>       > + fcc=1
> 	>       > + '[' -z 1 ']'
> 	>       > + echo 'Going to check 1 fail cases for ubuntu-x86-target.default.Benchmark.blobsallad'
> 	>       > Going to check 1 fail cases for ubuntu-x86-target.default.Benchmark.blobsallad
> 	>       > + fcc=0
> 	>       > ++ seq 0 0
> 	>       > + for n in '$(seq 0 $fcc)'
> 	>       > + fpvarname=BENCHMARK_BLOBSALLAD_FAIL_REGEXP_0
> 	>       > + fpvarmsg=BENCHMARK_BLOBSALLAD_FAIL_MESSAGE_0
> 	>       > + fpvarslog=BENCHMARK_BLOBSALLAD_FAIL_0_SYSLOG
> 	>       > + fptemplate='xrandr: command not found'
> 	>       > + fpmessage='target system does not have xrandr'
> 	>       > + fpslog=
> 	>       > + '[' '!' -z '' ']'
> 	>       > + grep -e 'xrandr: command not found' /fuego-rw/logs/Benchmark.blobsallad/ubuntu-x86-
> target.default.3.3/testlog.txt
> 	>       > + echo 'No fail cases detected for ubuntu-x86-target.default.Benchmark.blobsallad'
> 	>       > No fail cases detected for ubuntu-x86-target.default.Benchmark.blobsallad
> 	>       > + '[' 0 -ne 0 ']'
> 	>       > + syslog_cmp
> 	>       > + PREFIX=/fuego-rw/logs/Benchmark.blobsallad/ubuntu-x86-target.default.3.3/syslog
> 	>       > + rc=0
> 	>       > + '[' -f /fuego-rw/logs/Benchmark.blobsallad/ubuntu-x86-target.default.3.3/syslog.before.txt ']'
> 	>       > + diff -ua /fuego-rw/logs/Benchmark.blobsallad/ubuntu-x86-target.default.3.3/syslog.before.txt /fuego-
> 	>       > rw/logs/Benchmark.blobsallad/ubuntu-x86-target.default.3.3/syslog.after.txt
> 	>       > + grep -vEf /fuego-core/engine/scripts/syslog.ignore
> 	>       > + grep -E -e '\.(Bug:|Oops)'
> 	>       > + '[' 0 -eq 1 ']'
> 	>       > + return 0
> 	>       > + '[' 0 -ne 0 ']'
> 	>       > + PYTHON_ARGS='-W ignore::DeprecationWarning -W ignore::UserWarning'
> 	>       > + '[' -e /fuego-core/engine/tests/Benchmark.blobsallad/parser.py ']'
> 	>       > + run_python -W ignore::DeprecationWarning -W ignore::UserWarning /fuego-
> 	> core/engine/tests/Benchmark.blobsallad/parser.py
> 	>       > + '[' '!' -z /usr/local/bin:/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games ']'
> 	>       > + echo 'running python with PATH=/usr/local/bin:/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games'
> 	>       > running python with PATH=/usr/local/bin:/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games
> 	>       > + PATH=/usr/local/bin:/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games
> 	>       > + python -W ignore::DeprecationWarning -W ignore::UserWarning /fuego-
> 	> core/engine/tests/Benchmark.blobsallad/parser.py
> 	>       > Reading current values from /fuego-rw/logs/Benchmark.blobsallad/ubuntu-x86-target.default.3.3/testlog.txt
> 	>       > + rc=1
> 	>       > + '[' 1 -eq 0 ']'
> 	>       > + '[' 1 -eq 2 ']'
> 	>       > + '[' 1 -eq 3 ']'
> 	>       > + abort_job 'ERROR: problem while running the parser'
> 	>       > + set +x
> 	>       >
> 	>       > *** ABORTED ***
> 	>       >
> 	>       > Fuego error reason: ERROR: problem while running the parser
> 	>       >
> 	>       > Build step 'Execute shell' marked build as failure
> 	>       > [description-setter] Description set:  <a href="/fuego/userContent/fuego.logs/Benchmark.blobsallad/ubuntu-x86-
> 	>       > target.default.3.3/testlog.txt">log</a>
> 	>       > Finished: FAILURE
> 	>       >
> 	>       > Regards,
> 	>       > Dhinakar
> 	>       >
> 	>       > On Fri, May 26, 2017 at 5:43 PM, dhinakar k <dhinakar.k at gmail.com <mailto:dhinakar.k at gmail.com>
> <mailto:dhinakar.k at gmail.com <mailto:dhinakar.k at gmail.com> >
> 
> 	> <mailto:dhinakar.k at gmail.com <mailto:dhinakar.k at gmail.com>  <mailto:dhinakar.k at gmail.com
> <mailto:dhinakar.k at gmail.com> > > > wrote:
> 	>       >
> 	>       >
> 	>       >       Sure Daniel I will check and let you know.
> 	>       >
> 	>       >       Regards,
> 	>       >       Dhinakar​
> 	>       >
> 	>       >       On May 26, 2017 6:43 AM, "Daniel Sangorrin" <daniel.sangorrin at toshiba.co.jp
> <mailto:daniel.sangorrin at toshiba.co.jp>  <mailto:daniel.sangorrin at toshiba.co.jp <mailto:daniel.sangorrin at toshiba.co.jp> >
> 	> <mailto:daniel.sangorrin at toshiba.co.jp <mailto:daniel.sangorrin at toshiba.co.jp>  <mailto:daniel.sangorrin at toshiba.co.jp
> <mailto:daniel.sangorrin at toshiba.co.jp> > > >
> 	>       > wrote:
> 	>       >
> 	>       >
> 	>       >               Hi Dhinakar,
> 	>       >
> 	>       >               > -----Original Message-----
> 
> 	>       >               > From: dhinakar k [mailto:dhinakar.k at gmail.com <mailto:dhinakar.k at gmail.com>
> <mailto:dhinakar.k at gmail.com <mailto:dhinakar.k at gmail.com> >  <mailto:dhinakar.k at gmail.com <mailto:dhinakar.k at gmail.com>
> 	> <mailto:dhinakar.k at gmail.com <mailto:dhinakar.k at gmail.com> > > ]
> 	>       >               > Sent: Thursday, May 25, 2017 3:56 AM
> 	>       >               > Yes you are right blobsallad is dependent on sdl, cairo and x11. I installed the following in the docker container
> as
> 	>       > well as on my x86 64-
> 	>       >               > bit ubuntu host. One question here, for all such tests (functional or benchmark) do I need to install the
> 	>       > dependencies in docker as well
> 	>       >               > as host before the start of the test? Also, how is it done in case of arm based target boards? Should I install the
> 	>       > dependencies on the
> 	>       >               > target board?
> 	>       >               >
> 	>       >               > sudo apt-get install libsdl1.2-dev libsdl1.2debian
> 	>       >               > sudo apt-get install libcairo2-dev
> 	>       >               > sudo apt-get install x11-xserver-utils
> 	>       >               >
> 	>       >               > It got built, deployed and ran successfully (see the results below). But still the test result is a failure. I am not
> sure
> 	>       > why it did not
> 	>       >               > succeed. May be some problem in plotting. I have pasted the log at the end of this email. Please check and let
> me
> 	>       > know what could be
> 	>       >               > issue.
> 	>       >
> 	>       >               Thanks for the log. It looks like a bug in the parser (common.py file), maybe one that I fixed on the next branch
> (see
> 	>       > patch "parser: fix bug in the parser").
> 	>       >               Could you check with the next branch or apply that patch to master and see if it works?
> 	>       >
> 	>       >               Thanks,
> 	>       >               Daniel
> 	>       >
> 	>       >
> 	>       >               >
> 	>       >               >
> 	>       >               > Note: Sorry about the html based emails, my official email client seems to be configured that way. I didn't think
> it
> 	>       > was because of that.
> 	>       >               > Thanks for pointing it out. I will take care of it from now on.
> 	>       >               >
> 	>       >               >
> 	>       >               > Regards,
> 	>       >               >
> 	>       >               > Dhinakar
> 	>       >               >
> 	>       >               > number of blobs: 2
> 	>       >               > 2 objects = 19.93 fps
> 	>       >               > number of blobs: 3
> 	>       >               > number of blobs: 4
> 	>       >               > 4 objects = 19.54 fps
> 	>       >               > number of blobs: 5
> 	>       >               > number of blobs: 6
> 	>       >               > number of blobs: 7
> 	>       >               > number of blobs: 8
> 	>       >               > 8 objects = 19.78 fps
> 	>       >               > number of blobs: 9
> 	>       >               > number of blobs: 10
> 	>       >               > number of blobs: 11
> 	>       >               > number of blobs: 12
> 	>       >               > number of blobs: 13
> 	>       >               > number of blobs: 14
> 	>       >               > number of blobs: 15
> 	>       >               > number of blobs: 16
> 	>       >               > 16 objects = 18.50 fps
> 	>       >               > LOG
> 	>       >               > *****
> 	>       >               >
> 	>       >               > ##### doing fuego phase: build ########
> 	>       >               > gcc -g -Wall -I//usr/include -I//usr/include/cairo -I//usr/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT -c
> 	>       > bs_main.c
> 	>       >               > gcc -g -Wall -I//usr/include -I//usr/include/cairo -I//usr/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT -c
> 	>       > bs_vector.c
> 	>       >               > gcc -g -Wall -I//usr/include -I//usr/include/cairo -I//usr/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT -c
> 	>       > bs_pointmass.c
> 	>       >               > gcc -g -Wall -I//usr/include -I//usr/include/cairo -I//usr/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT -c
> 	>       > bs_joint.c
> 	>       >               > gcc -g -Wall -I//usr/include -I//usr/include/cairo -I//usr/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT -c
> 	>       > bs_stick.c
> 	>       >               > gcc -g -Wall -I//usr/include -I//usr/include/cairo -I//usr/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT -c
> 	> bs_env.c
> 	>       >               > gcc -g -Wall -I//usr/include -I//usr/include/cairo -I//usr/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT -c
> 	>       > bs_array.c
> 	>       >               > gcc -g -Wall -I//usr/include -I//usr/include/cairo -I//usr/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT -c
> 	>       > bs_blob.c
> 	>       >               > gcc -g -Wall -I//usr/include -I//usr/include/cairo -I//usr/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT -c
> 	>       > bs_blob_collective.c
> 	>       >               > gcc -g -Wall -I//usr/include -I//usr/include/cairo -I//usr/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT -c
> 	>       > bs_cairo.c
> 	>       >               > gcc -g -Wall -I//usr/include -I//usr/include/cairo -I//usr/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT -c
> bs_util.c
> 	>       >               > gcc -g -Wall -I//usr/include -I//usr/include/cairo -I//usr/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT -c
> bs_list.c
> 	>       >               > gcc -g -Wall -I//usr/include -I//usr/include/cairo -I//usr/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT -c
> 	>       > bs_octree.c
> 	>       >               > bs_octree.c:493:1: warning: 'bs_octree_draw_nodes' defined but not used [-Wunused-function]
> 	>       >               >  bs_octree_draw_nodes(bs_octree_node_t *pNode,
> 	>       >               >  ^
> 	>       >               > gcc -g -Wall -I//usr/include -I//usr/include/cairo -I//usr/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT -c
> 	>       > bs_vector_util.c
> 	>       >               > gcc -g -Wall -I//usr/include -I//usr/include/cairo -I//usr/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT -c
> 	>       > bs_profiler.c
> 	>       >               > gcc -g -Wall -I//usr/include -I//usr/include/cairo -I//usr/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT -c
> 	>       > bs_rubberband.c
> 	>       >               > bs_rubberband.c: In function 'bs_rubberband_create':
> 	>       >               > bs_rubberband.c:13:20: warning: unused variable 'p' [-Wunused-variable]
> 	>       >               >    bs_int32_t i, j, p;
> 	>       >               >                     ^
> 	>       >               > bs_rubberband.c: In function 'bs_rubberband_sc':
> 	>       >               > bs_rubberband.c:57:20: warning: unused variable 'k' [-Wunused-variable]
> 	>       >               >    bs_int32_t i, j, k;
> 	>       >               >                     ^
> 	>       >               > gcc -g -o blobsallad bs_main.o bs_vector.o bs_pointmass.o bs_joint.o bs_stick.o bs_env.o bs_array.o
> bs_blob.o
> 	>       > bs_blob_collective.o
> 	>       >               > bs_cairo.o bs_util.o bs_list.o bs_octree.o bs_vector_util.o bs_profiler.o bs_rubberband.o -Wl,-rpath-
> link=//usr/lib -
> 	>       > L//usr/lib -lcairo -
> 	>       >               > lSDL -lpthread -lm
> 	>       >               > Fuego test_build duration=1.58455991745 seconds
> 	>       >               > ##### doing fuego phase: deploy ########
> 	>       >               > ##### doing fuego phase: pre_deploy ########
> 	>       >               > ##### doing fuego phase: test_deploy ########
> 	>       >               > ##### doing fuego phase: post_deploy ########
> 	>       >               > ##### doing fuego phase: run ########
> 	>       >               > WARNING: test log file parameter empty, so will use default
> 	>       >               > number of blobs: 2
> 	>       >               > 2 objects = 19.93 fps
> 	>       >               > number of blobs: 3
> 	>       >               > number of blobs: 4
> 	>       >               > 4 objects = 19.54 fps
> 	>       >               > number of blobs: 5
> 	>       >               > number of blobs: 6
> 	>       >               > number of blobs: 7
> 	>       >               > number of blobs: 8
> 	>       >               > 8 objects = 19.78 fps
> 	>       >               > number of blobs: 9
> 	>       >               > number of blobs: 10
> 	>       >               > number of blobs: 11
> 	>       >               > number of blobs: 12
> 	>       >               > number of blobs: 13
> 	>       >               > number of blobs: 14
> 	>       >               > number of blobs: 15
> 	>       >               > number of blobs: 16
> 	>       >               > 16 objects = 18.50 fps
> 	>       >               > ##### doing fuego phases: get_testlog AND processing ########
> 	>       >               >
> 	>       >               >  RESULT ANALYSIS
> 	>       >               >
> 	>       >               > running python with PATH=/usr/local/bin:/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games
> 	>       >               > Reading current values from /fuego-rw/logs/Benchmark.blobsallad/docker.default.13.13/testlog.txt
> 	>       >               > Test section 8_objects: test result 19.78 satisfies (ge) threshold 1.
> 	>       >               > Test section 2_objects: test result 19.93 satisfies (ge) threshold 1.
> 	>       >               > Test section 4_objects: test result 19.54 satisfies (ge) threshold 1.
> 	>       >               > Test section 16_objects: test result 18.50 satisfies (ge) threshold 1.
> 	>       >               > Data file /fuego-rw/logs/Benchmark.blobsallad/plot.data was updated.
> 	>       >               > Reading plot data from /fuego-rw/logs/Benchmark.blobsallad/plot.data
> 	>       >               > Traceback (most recent call last):
> 	>       >               >   File "/fuego-core/engine/tests/Benchmark.blobsallad/parser.py", line 22, in <module>
> 	>       >               >     sys.exit(plib.process_data(ref_section_pat, cur_dict, 's', 'FPS'))
> 	>       >               >   File "/fuego-core/engine/scripts/parser/common.py", line 98, in process_data
> 	>       >               >     create_plot(label)
> 	>       >               >   File "/fuego-core/engine/scripts/parser/common.py", line 260, in create_plot
> 	>       >               >     ax.plot(plotrange, test_results_data.get(key).split(",")[-bnum:], 'o-', label='Test '+key)
> 	>       >               >   File "/usr/lib/python2.7/dist-packages/matplotlib/axes/_axes.py", line 1374, in plot
> 	>       >               >     for line in self._get_lines(*args, **kwargs):
> 	>       >               >   File "/usr/lib/python2.7/dist-packages/matplotlib/axes/_base.py", line 303, in _grab_next_args
> 	>       >               >     for seg in self._plot_args(remaining, kwargs):
> 	>       >               >   File "/usr/lib/python2.7/dist-packages/matplotlib/axes/_base.py", line 281, in _plot_args
> 	>       >               >     x, y = self._xy_from_xy(x, y)
> 	>       >               >   File "/usr/lib/python2.7/dist-packages/matplotlib/axes/_base.py", line 223, in _xy_from_xy
> 	>       >               >     raise ValueError("x and y must have same first dimension")
> 	>       >               > ValueError: x and y must have same first dimension
> 	>       >               > in signal_handler
> 	>       >               > ##### doing fuego phase: post_test ########
> 	>       >               > Going to check 1 fail cases for docker.default.Benchmark.blobsallad
> 	>       >               > Build step 'Execute shell' marked build as failure
> 	>       >               > [description-setter] Description set: <a
> 	>       >               > href="/fuego/userContent/fuego.logs/Benchmark.blobsallad/docker.default.13.13/testlog.txt">log</a>
> 	>       >               > Finished: FAILURE
> 	>       >               >
> 	>       >               > > -----Original Message-----
> 	>       >               > > From: fuego-bounces at lists.linuxfoundation.org <mailto:fuego-bounces at lists.linuxfoundation.org>
> <mailto:fuego-bounces at lists.linuxfoundation.org <mailto:fuego-bounces at lists.linuxfoundation.org> >
> 	> <mailto:fuego-bounces at lists.linuxfoundation.org <mailto:fuego-bounces at lists.linuxfoundation.org>  <mailto:fuego-
> bounces at lists.linuxfoundation.org <mailto:fuego-bounces at lists.linuxfoundation.org> > >
> 	>       > <mailto:fuego-bounces at lists.linuxfoundation.org <mailto:fuego-bounces at lists.linuxfoundation.org>  <mailto:fuego-
> bounces at lists.linuxfoundation.org <mailto:fuego-bounces at lists.linuxfoundation.org> >  <mailto:fuego- <mailto:fuego->
> 	> bounces at lists.linuxfoundation.org <mailto:bounces at lists.linuxfoundation.org>  <mailto:fuego-
> bounces at lists.linuxfoundation.org <mailto:fuego-bounces at lists.linuxfoundation.org> > > >  [mailto:fuego- <mailto:fuego->
> <mailto:fuego- <mailto:fuego-> >
> 	>       > <mailto:fuego- <mailto:fuego->  <mailto:fuego- <mailto:fuego-> > >
> 	>       >               > bounces at lists.linuxfoundation.org <mailto:bounces at lists.linuxfoundation.org>
> <mailto:bounces at lists.linuxfoundation.org <mailto:bounces at lists.linuxfoundation.org> >
> 
> 	> <mailto:bounces at lists.linuxfoundation.org <mailto:bounces at lists.linuxfoundation.org>
> <mailto:bounces at lists.linuxfoundation.org <mailto:bounces at lists.linuxfoundation.org> > >  <mailto:fuego- <mailto:fuego->
> <mailto:fuego- <mailto:fuego-> >
> 	>       > bounces at lists.linuxfoundation.org <mailto:bounces at lists.linuxfoundation.org>
> <mailto:bounces at lists.linuxfoundation.org <mailto:bounces at lists.linuxfoundation.org> >  <mailto:fuego- <mailto:fuego->
> 	> bounces at lists.linuxfoundation.org <mailto:bounces at lists.linuxfoundation.org>  <mailto:fuego-
> bounces at lists.linuxfoundation.org <mailto:fuego-bounces at lists.linuxfoundation.org> > > > ] On Behalf Of Dhinakar
> 	>       >               > > Kalyanasundaram
> 	>       >               > > Sent: Wednesday, May 24, 2017 4:20 PM
> 	>       >               > > Benchmark.blobsallad test build failing on my x86 64-bit ubuntu pc.
> 	>       >               > >
> 	>       >               > > Jenkins job console error -> ->
> 	>       >               > >
> 	>       >               > > /tmp/hudson4393205057432627536.sh: line 10: 19407 Killed timeout --signal=9 100m /bin/bash
> 	>       >               > > $FUEGO_CORE/engine/tests/${TESTDIR}/${TESTNAME}.sh
> 	>       >               > > Build step 'Execute shell' marked build as failure
> 	>       >               > >
> 	>       >               > >
> 	>       >               > >
> 	>       >               > > Can anyone please let me know if they have executed this test and passed?
> 	>       >               >
> 	>       >               > I haven't tried this one yet. From what I see at https://blobsallad.se/ it looks
> 	>       >               > like it probably has dependencies for the SDK such as SDL and Cairo.
> 	>       >               > Do you have libsdl-dev and libcairo-dev installed?
> 	>       >               > Since it's graphical you will need a target with X (it's not going to work on docker)
> 	>       >               > Can you check the build log and send the line that causes the failure?
> 	>       >               > "> Build step 'Execute shell' marked build as failure" provides no information.
> 	>       >               >
> 	>       >               > By the way, could you send your emails in clear text instead of html? Most of your mails
> 	>       >               > can't be seen on the archive because of that:
> 	>       >               > https://lists.linuxfoundation.org/pipermail/fuego/2017-May/000669.html
> <https://lists.linuxfoundation.org/pipermail/fuego/2017-May/000669.html>
> 	> <https://lists.linuxfoundation.org/pipermail/fuego/2017-May/000669.html
> <https://lists.linuxfoundation.org/pipermail/fuego/2017-May/000669.html> >
> 	>       > <https://lists.linuxfoundation.org/pipermail/fuego/2017-May/000669.html
> <https://lists.linuxfoundation.org/pipermail/fuego/2017-May/000669.html>
> 	> <https://lists.linuxfoundation.org/pipermail/fuego/2017-May/000669.html
> <https://lists.linuxfoundation.org/pipermail/fuego/2017-May/000669.html> > >
> 	>       > <https://lists.linuxfoundation.org/pipermail/fuego/2017- <https://lists.linuxfoundation.org/pipermail/fuego/2017->
> <https://lists.linuxfoundation.org/pipermail/fuego/2017- <https://lists.linuxfoundation.org/pipermail/fuego/2017-> >
> 	> <https://lists.linuxfoundation.org/pipermail/fuego/2017- <https://lists.linuxfoundation.org/pipermail/fuego/2017->
> <https://lists.linuxfoundation.org/pipermail/fuego/2017- <https://lists.linuxfoundation.org/pipermail/fuego/2017-> > >
> 	>       >               > May/000669.html>
> 	>       >               >
> 	>       >               > Thanks
> 	>       >               > Daniel
> 	>       >
> 	>       >
> 	>       >
> 	>       >
> 	>       >
> 	>
> 	>
> 	>
> 	>
> 
> 
> 
> 
> 





More information about the Fuego mailing list