[Fuego] Benchmark.blobsallad test build failing on my x86 64-bit ubuntu pc
Daniel Sangorrin
daniel.sangorrin at toshiba.co.jp
Tue Jun 27 06:18:29 UTC 2017
> 1) The test is not working on your setup at all (it doesn't even generate a lot).
lot -> log
> 2) The parser is not generating a failed run.json
>
> For problem 1) I suggest you try to run it manually (not from JSON) until it works
> on your setup.
JSON -> Fuego
>
> I will solve problem 2) soon, but if you fix 1) then it should work.
>
> Thanks,
> Daniel
>
>
>
> >
> > Regards,
> > Dhinakar
> >
> > On Jun 26, 2017 9:51 AM, "dhinakar k" <dhinakar.k at gmail.com <mailto:dhinakar.k at gmail.com> > wrote:
> >
> >
> > Thanks Daniel, I will wait for that patch.
> >
> > Regards,
> > Dhinakar
> >
> > On Jun 26, 2017 5:47 AM, "Daniel Sangorrin" <daniel.sangorrin at toshiba.co.jp <mailto:daniel.sangorrin at toshiba.co.jp> >
> > wrote:
> >
> >
> > Hi Dhinakar,
> >
> > Thanks for the feedback.
> >
> > I think it's a problem that I have already fixed but not released yet.
> >
> > Could you check if
> > /fuego-rw/logs/Benchmark.blobsallad/Ethernet-TRAV-X86-Target.default.5.5/testlog.txt
> > exists?
> >
> > The parser was assuming that if the test didn't even produce (probably because of [1]) a testlog.txt then
> > there was nothing to parse. I will try to send a patch to fix this issue and others soon.
> >
> > Thanks,
> > Daniel
> >
> > [1] > Can't open display :0
> >
> >
> >
> > > -----Original Message-----
> > > From: dhinakar k [mailto:dhinakar.k at gmail.com <mailto:dhinakar.k at gmail.com> ]
> >
> > > Sent: Monday, June 26, 2017 5:33 AM
> > > To: Daniel Sangorrin
> > > Cc: fuego at lists.linuxfoundation.org <mailto:fuego at lists.linuxfoundation.org>
> >
> > > Subject: Re: Benchmark.blobsallad test build failing on my x86 64-bit ubuntu pc
> > >
> > > Hi Daniel,
> > >
> > >
> >
> > > Thanks for the response.
> > >
> > > I executed after deleting the log folder as you mentioned.
> > >
> > > Please check the log below.
> > >
> > > Any dependencies missing?
> > >
> > > Please check the log and let me know.
> > >
> > >
> > > Regards,
> > >
> > > Dhinakar
> > >
> > > ##### doing fuego phase: build ########
> > > Unpacking blobsallad-src.tar.bz2
> > > gcc -g -Wall -I//usr/include -I//usr/include/cairo -I//usr/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT -c
> > bs_main.c
> > > gcc -g -Wall -I//usr/include -I//usr/include/cairo -I//usr/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT -c
> > bs_vector.c
> > > gcc -g -Wall -I//usr/include -I//usr/include/cairo -I//usr/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT -c
> > bs_pointmass.c
> > > gcc -g -Wall -I//usr/include -I//usr/include/cairo -I//usr/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT -c
> > bs_joint.c
> > > gcc -g -Wall -I//usr/include -I//usr/include/cairo -I//usr/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT -c
> > bs_stick.c
> > > gcc -g -Wall -I//usr/include -I//usr/include/cairo -I//usr/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT -c bs_env.c
> > > gcc -g -Wall -I//usr/include -I//usr/include/cairo -I//usr/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT -c
> > bs_array.c
> > > gcc -g -Wall -I//usr/include -I//usr/include/cairo -I//usr/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT -c
> > bs_blob.c
> > > gcc -g -Wall -I//usr/include -I//usr/include/cairo -I//usr/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT -c
> > bs_blob_collective.c
> > > gcc -g -Wall -I//usr/include -I//usr/include/cairo -I//usr/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT -c
> > bs_cairo.c
> > > gcc -g -Wall -I//usr/include -I//usr/include/cairo -I//usr/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT -c bs_util.c
> > > gcc -g -Wall -I//usr/include -I//usr/include/cairo -I//usr/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT -c bs_list.c
> > > gcc -g -Wall -I//usr/include -I//usr/include/cairo -I//usr/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT -c
> > bs_octree.c
> > > bs_octree.c:493:1: warning: 'bs_octree_draw_nodes' defined but not used [-Wunused-function]
> > > bs_octree_draw_nodes(bs_octree_node_t *pNode,
> > > ^
> > > gcc -g -Wall -I//usr/include -I//usr/include/cairo -I//usr/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT -c
> > bs_vector_util.c
> > > gcc -g -Wall -I//usr/include -I//usr/include/cairo -I//usr/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT -c
> > bs_profiler.c
> > > gcc -g -Wall -I//usr/include -I//usr/include/cairo -I//usr/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT -c
> > bs_rubberband.c
> > > bs_rubberband.c: In function 'bs_rubberband_create':
> > > bs_rubberband.c:13:20: warning: unused variable 'p' [-Wunused-variable]
> > > bs_int32_t i, j, p;
> > > ^
> > > bs_rubberband.c: In function 'bs_rubberband_sc':
> > > bs_rubberband.c:57:20: warning: unused variable 'k' [-Wunused-variable]
> > > bs_int32_t i, j, k;
> > > ^
> > > gcc -g -o blobsallad bs_main.o bs_vector.o bs_pointmass.o bs_joint.o bs_stick.o bs_env.o bs_array.o bs_blob.o
> > bs_blob_collective.o
> >
> > > bs_cairo.o bs_util.o bs_list.o bs_octree.o bs_vector_util.o bs_profiler.o bs_rubberband.o -Wl,-rpath-link=//usr/lib -
> > L//usr/lib -lcairo -
> > > lSDL -lpthread -lm
> >
> > > Fuego test_build duration=6.51003742218 seconds
> > > ##### doing fuego phase: deploy ########
> > > ##### doing fuego phase: pre_deploy ########
> > > ##### doing fuego phase: test_deploy ########
> > > Warning: Permanently added '192.168.1.117' (ECDSA) to the list of known hosts.
> > > Warning: Permanently added '192.168.1.117' (ECDSA) to the list of known hosts.
> > > ##### doing fuego phase: post_deploy ########
> > > ##### doing fuego phase: run ########
> > > Warning: Permanently added '192.168.1.117' (ECDSA) to the list of known hosts.
> > > WARNING: test log file parameter empty, so will use default
> > > Warning: Permanently added '192.168.1.117' (ECDSA) to the list of known hosts.
> > > Warning: Permanently added '192.168.1.117' (ECDSA) to the list of known hosts.
> > > No protocol specified
> > > Can't open display :0
> > > Warning: Permanently added '192.168.1.117' (ECDSA) to the list of known hosts.
> > > Warning: Permanently added '192.168.1.117' (ECDSA) to the list of known hosts.
> > > ##### doing fuego phase: post_test ########
> > > Warning: Permanently added '192.168.1.117' (ECDSA) to the list of known hosts.
> > > Warning: Permanently added '192.168.1.117' (ECDSA) to the list of known hosts.
> > > Warning: Permanently added '192.168.1.117' (ECDSA) to the list of known hosts.
> > > Warning: Permanently added '192.168.1.117' (ECDSA) to the list of known hosts.
> > > Warning: Permanently added '192.168.1.117' (ECDSA) to the list of known hosts.
> > > Warning: Permanently added '192.168.1.117' (ECDSA) to the list of known hosts.
> > > Teardown board link
> > > ##### doing fuego phase: processing ########
> > > Going to check 1 fail cases for Ethernet-TRAV-X86-Target.default.Benchmark.blobsallad
> > > No fail cases detected for Ethernet-TRAV-X86-Target.default.Benchmark.blobsallad
> > > running python with PATH=/usr/local/bin:/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games
> > > Reading current values from /fuego-rw/logs/Benchmark.blobsallad/Ethernet-TRAV-X86-
> > Target.default.5.5/testlog.txt
> > >
> > > *** ABORTED ***
> > >
> > > Fuego error reason: ERROR: problem while running the parser
> > >
> > > Build was aborted
> >
> > > Aborted by unknown <http://localhost:8080/fuego/user/unknown <http://localhost:8080/fuego/user/unknown> >
> >
> > > Terminated
> > > [description-setter] Description set: <a href="/fuego/userContent/fuego.logs/Benchmark.blobsallad/Ethernet-
> > TRAV-X86-
> > > Target.default.5.5/testlog.txt">log</a>
> > > Finished: ABORTED
> > >
> >
> > > On Fri, Jun 23, 2017 at 11:27 AM, Daniel Sangorrin <daniel.sangorrin at toshiba.co.jp
> > <mailto:daniel.sangorrin at toshiba.co.jp> <mailto:daniel.sangorrin at toshiba.co.jp <mailto:daniel.sangorrin at toshiba.co.jp> > >
> wrote:
> > >
> > >
> > > Hi Dhinakar,
> > >
> >
> > > Sorry for the long delay.
> > >
> > > Could you do the following and try again?
> > >
> > > # rm -rf /fuego-rw/logs/Benchmark.blobsallad
> > >
> > > Thanks,
> > > Daniel
> > >
> > >
> > > > -----Original Message-----
> >
> > > > From: dhinakar k [mailto:dhinakar.k at gmail.com <mailto:dhinakar.k at gmail.com>
> > <mailto:dhinakar.k at gmail.com <mailto:dhinakar.k at gmail.com> > ]
> > > > Sent: Friday, June 09, 2017 10:48 AM
> > > > To: Daniel Sangorrin
> >
> > > > Cc: fuego at lists.linuxfoundation.org <mailto:fuego at lists.linuxfoundation.org>
> > <mailto:fuego at lists.linuxfoundation.org <mailto:fuego at lists.linuxfoundation.org> >
> > > > Subject: RE: Benchmark.blobsallad test build failing on my x86 64-bit ubuntu pc
> > > >
> > > > Fine Daniel, thanks for the response.
> > > >
> > > > Regards,
> > > > Dhinakar
> > > >
> > > > On Jun 9, 2017 5:38 AM, "Daniel Sangorrin" <daniel.sangorrin at toshiba.co.jp
> > <mailto:daniel.sangorrin at toshiba.co.jp> <mailto:daniel.sangorrin at toshiba.co.jp <mailto:daniel.sangorrin at toshiba.co.jp> >
> >
> > > <mailto:daniel.sangorrin at toshiba.co.jp <mailto:daniel.sangorrin at toshiba.co.jp>
> > <mailto:daniel.sangorrin at toshiba.co.jp <mailto:daniel.sangorrin at toshiba.co.jp> > > > wrote:
> > > >
> > > >
> > > > Hi Dhinakar,
> > > >
> >
> > > > Sorry for the delay.
> > > > Thanks for reporting. I will look at it when I have time (sorry, I'm busy at the moment).
> > > >
> > > > Tim: how should we manage issues/bugs? I can't find the "issues" functionality
> > > > that github provides on bitbucket.
> > > >
> > > > Thanks,
> > > > Daniel
> > > >
> > > > > -----Original Message-----
> >
> > > > > From: dhinakar k [mailto:dhinakar.k at gmail.com <mailto:dhinakar.k at gmail.com>
> > <mailto:dhinakar.k at gmail.com <mailto:dhinakar.k at gmail.com> > <mailto:dhinakar.k at gmail.com <mailto:dhinakar.k at gmail.com>
> > > <mailto:dhinakar.k at gmail.com <mailto:dhinakar.k at gmail.com> > > ]
> > > > > Sent: Tuesday, June 06, 2017 1:52 AM
> > > > > To: Daniel Sangorrin
> > >
> > > > > Cc: fuego at lists.linuxfoundation.org <mailto:fuego at lists.linuxfoundation.org>
> > <mailto:fuego at lists.linuxfoundation.org <mailto:fuego at lists.linuxfoundation.org> >
> >
> > > <mailto:fuego at lists.linuxfoundation.org <mailto:fuego at lists.linuxfoundation.org>
> > <mailto:fuego at lists.linuxfoundation.org <mailto:fuego at lists.linuxfoundation.org> > >
> >
> > > > > Subject: Re: Benchmark.blobsallad test build failing on my x86 64-bit ubuntu pc
> > > > >
> > > > > Hi Daniel,
> > > > >
> > > > >
> > > > > It seems the parser has an issue. I posted in another thread about it.
> > > > >
> > > > > But thought of posting the error log here for your reference.
> > > > >
> > > > > Please check and confirm.
> > > > >
> > > > >
> > > > > ##### doing fuego phase: processing ########
> > > > > + processing
> > > > > + local RETURN_VALUE=0
> > > > > + call_if_present test_processing
> > > > > + declare -f -F test_processing
> > > > > + return 0
> > > > > + '[' 0 -ne 0 ']'
> > > > > + fail_check_cases
> > > > > + testlog=/fuego-rw/logs/Benchmark.blobsallad/ubuntu-x86-target.default.3.3/testlog.txt
> > > > > + slog_prefix=/fuego-rw/logs/Benchmark.blobsallad/ubuntu-x86-target.default.3.3/syslog
> > > > > ++ tr . _
> > > > > ++ echo BENCHMARK.BLOBSALLAD
> > > > > + upName=BENCHMARK_BLOBSALLAD
> > > > > + fcname=BENCHMARK_BLOBSALLAD_FAIL_CASE_COUNT
> > > > > + fcc=1
> > > > > + '[' -z 1 ']'
> > > > > + echo 'Going to check 1 fail cases for ubuntu-x86-target.default.Benchmark.blobsallad'
> > > > > Going to check 1 fail cases for ubuntu-x86-target.default.Benchmark.blobsallad
> > > > > + fcc=0
> > > > > ++ seq 0 0
> > > > > + for n in '$(seq 0 $fcc)'
> > > > > + fpvarname=BENCHMARK_BLOBSALLAD_FAIL_REGEXP_0
> > > > > + fpvarmsg=BENCHMARK_BLOBSALLAD_FAIL_MESSAGE_0
> > > > > + fpvarslog=BENCHMARK_BLOBSALLAD_FAIL_0_SYSLOG
> > > > > + fptemplate='xrandr: command not found'
> > > > > + fpmessage='target system does not have xrandr'
> > > > > + fpslog=
> > > > > + '[' '!' -z '' ']'
> > > > > + grep -e 'xrandr: command not found' /fuego-rw/logs/Benchmark.blobsallad/ubuntu-x86-
> > > target.default.3.3/testlog.txt
> > > > > + echo 'No fail cases detected for ubuntu-x86-target.default.Benchmark.blobsallad'
> > > > > No fail cases detected for ubuntu-x86-target.default.Benchmark.blobsallad
> > > > > + '[' 0 -ne 0 ']'
> > > > > + syslog_cmp
> > > > > + PREFIX=/fuego-rw/logs/Benchmark.blobsallad/ubuntu-x86-target.default.3.3/syslog
> > > > > + rc=0
> > > > > + '[' -f /fuego-rw/logs/Benchmark.blobsallad/ubuntu-x86-target.default.3.3/syslog.before.txt ']'
> > > > > + diff -ua /fuego-rw/logs/Benchmark.blobsallad/ubuntu-x86-target.default.3.3/syslog.before.txt /fuego-
> > > > > rw/logs/Benchmark.blobsallad/ubuntu-x86-target.default.3.3/syslog.after.txt
> > > > > + grep -vEf /fuego-core/engine/scripts/syslog.ignore
> > > > > + grep -E -e '\.(Bug:|Oops)'
> > > > > + '[' 0 -eq 1 ']'
> > > > > + return 0
> > > > > + '[' 0 -ne 0 ']'
> > > > > + PYTHON_ARGS='-W ignore::DeprecationWarning -W ignore::UserWarning'
> > > > > + '[' -e /fuego-core/engine/tests/Benchmark.blobsallad/parser.py ']'
> > > > > + run_python -W ignore::DeprecationWarning -W ignore::UserWarning /fuego-
> > > > core/engine/tests/Benchmark.blobsallad/parser.py
> > > > > + '[' '!' -z /usr/local/bin:/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games ']'
> > > > > + echo 'running python with
> > PATH=/usr/local/bin:/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games'
> > > > > running python with PATH=/usr/local/bin:/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games
> > > > > + PATH=/usr/local/bin:/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games
> > > > > + python -W ignore::DeprecationWarning -W ignore::UserWarning /fuego-
> > > > core/engine/tests/Benchmark.blobsallad/parser.py
> > > > > Reading current values from /fuego-rw/logs/Benchmark.blobsallad/ubuntu-x86-
> > target.default.3.3/testlog.txt
> > > > > + rc=1
> > > > > + '[' 1 -eq 0 ']'
> > > > > + '[' 1 -eq 2 ']'
> > > > > + '[' 1 -eq 3 ']'
> > > > > + abort_job 'ERROR: problem while running the parser'
> > > > > + set +x
> > > > >
> > > > > *** ABORTED ***
> > > > >
> > > > > Fuego error reason: ERROR: problem while running the parser
> > > > >
> > > > > Build step 'Execute shell' marked build as failure
> > > > > [description-setter] Description set: <a
> > href="/fuego/userContent/fuego.logs/Benchmark.blobsallad/ubuntu-x86-
> > > > > target.default.3.3/testlog.txt">log</a>
> > > > > Finished: FAILURE
> > > > >
> > > > > Regards,
> > > > > Dhinakar
> > > > >
> > > > > On Fri, May 26, 2017 at 5:43 PM, dhinakar k <dhinakar.k at gmail.com <mailto:dhinakar.k at gmail.com>
> > <mailto:dhinakar.k at gmail.com <mailto:dhinakar.k at gmail.com> >
> > > <mailto:dhinakar.k at gmail.com <mailto:dhinakar.k at gmail.com> <mailto:dhinakar.k at gmail.com
> > <mailto:dhinakar.k at gmail.com> > >
> > >
> >
> > > > <mailto:dhinakar.k at gmail.com <mailto:dhinakar.k at gmail.com> <mailto:dhinakar.k at gmail.com
> > <mailto:dhinakar.k at gmail.com> > <mailto:dhinakar.k at gmail.com <mailto:dhinakar.k at gmail.com>
> >
> > > <mailto:dhinakar.k at gmail.com <mailto:dhinakar.k at gmail.com> > > > > wrote:
> > > > >
> > > > >
> > > > > Sure Daniel I will check and let you know.
> > > > >
> > > > > Regards,
> > > > > Dhinakar
> > > > >
> > > > > On May 26, 2017 6:43 AM, "Daniel Sangorrin" <daniel.sangorrin at toshiba.co.jp
> > <mailto:daniel.sangorrin at toshiba.co.jp>
> > > <mailto:daniel.sangorrin at toshiba.co.jp <mailto:daniel.sangorrin at toshiba.co.jp> >
> > <mailto:daniel.sangorrin at toshiba.co.jp <mailto:daniel.sangorrin at toshiba.co.jp> <mailto:daniel.sangorrin at toshiba.co.jp
> > <mailto:daniel.sangorrin at toshiba.co.jp> > >
> > > > <mailto:daniel.sangorrin at toshiba.co.jp <mailto:daniel.sangorrin at toshiba.co.jp>
> > <mailto:daniel.sangorrin at toshiba.co.jp <mailto:daniel.sangorrin at toshiba.co.jp> > <mailto:daniel.sangorrin at toshiba.co.jp
> > <mailto:daniel.sangorrin at toshiba.co.jp>
> > > <mailto:daniel.sangorrin at toshiba.co.jp <mailto:daniel.sangorrin at toshiba.co.jp> > > > >
> > > > > wrote:
> > > > >
> > > > >
> > > > > Hi Dhinakar,
> > > > >
> > > > > > -----Original Message-----
> > >
> > > > > > From: dhinakar k [mailto:dhinakar.k at gmail.com <mailto:dhinakar.k at gmail.com>
> > <mailto:dhinakar.k at gmail.com <mailto:dhinakar.k at gmail.com> >
> >
> > > <mailto:dhinakar.k at gmail.com <mailto:dhinakar.k at gmail.com> <mailto:dhinakar.k at gmail.com
> > <mailto:dhinakar.k at gmail.com> > > <mailto:dhinakar.k at gmail.com <mailto:dhinakar.k at gmail.com>
> <mailto:dhinakar.k at gmail.com
> > <mailto:dhinakar.k at gmail.com> >
> >
> > > > <mailto:dhinakar.k at gmail.com <mailto:dhinakar.k at gmail.com> <mailto:dhinakar.k at gmail.com
> > <mailto:dhinakar.k at gmail.com> > > > ]
> > > > > > Sent: Thursday, May 25, 2017 3:56 AM
> > > > > > Yes you are right blobsallad is dependent on sdl, cairo and x11. I installed the following in the
> > docker container
> > > as
> > > > > well as on my x86 64-
> > > > > > bit ubuntu host. One question here, for all such tests (functional or benchmark) do I need to install
> > the
> > > > > dependencies in docker as well
> > > > > > as host before the start of the test? Also, how is it done in case of arm based target boards?
> > Should I install the
> > > > > dependencies on the
> > > > > > target board?
> > > > > >
> > > > > > sudo apt-get install libsdl1.2-dev libsdl1.2debian
> > > > > > sudo apt-get install libcairo2-dev
> > > > > > sudo apt-get install x11-xserver-utils
> > > > > >
> > > > > > It got built, deployed and ran successfully (see the results below). But still the test result is a
> > failure. I am not
> > > sure
> > > > > why it did not
> > > > > > succeed. May be some problem in plotting. I have pasted the log at the end of this email. Please
> > check and let
> > > me
> > > > > know what could be
> > > > > > issue.
> > > > >
> > > > > Thanks for the log. It looks like a bug in the parser (common.py file), maybe one that I fixed on the
> > next branch
> > > (see
> > > > > patch "parser: fix bug in the parser").
> > > > > Could you check with the next branch or apply that patch to master and see if it works?
> > > > >
> > > > > Thanks,
> > > > > Daniel
> > > > >
> > > > >
> > > > > >
> > > > > >
> > > > > > Note: Sorry about the html based emails, my official email client seems to be configured that way.
> > I didn't think
> > > it
> > > > > was because of that.
> > > > > > Thanks for pointing it out. I will take care of it from now on.
> > > > > >
> > > > > >
> > > > > > Regards,
> > > > > >
> > > > > > Dhinakar
> > > > > >
> > > > > > number of blobs: 2
> > > > > > 2 objects = 19.93 fps
> > > > > > number of blobs: 3
> > > > > > number of blobs: 4
> > > > > > 4 objects = 19.54 fps
> > > > > > number of blobs: 5
> > > > > > number of blobs: 6
> > > > > > number of blobs: 7
> > > > > > number of blobs: 8
> > > > > > 8 objects = 19.78 fps
> > > > > > number of blobs: 9
> > > > > > number of blobs: 10
> > > > > > number of blobs: 11
> > > > > > number of blobs: 12
> > > > > > number of blobs: 13
> > > > > > number of blobs: 14
> > > > > > number of blobs: 15
> > > > > > number of blobs: 16
> > > > > > 16 objects = 18.50 fps
> > > > > > LOG
> > > > > > *****
> > > > > >
> > > > > > ##### doing fuego phase: build ########
> > > > > > gcc -g -Wall -I//usr/include -I//usr/include/cairo -I//usr/include/SDL -D_GNU_SOURCE=1 -
> > D_REENTRANT -c
> > > > > bs_main.c
> > > > > > gcc -g -Wall -I//usr/include -I//usr/include/cairo -I//usr/include/SDL -D_GNU_SOURCE=1 -
> > D_REENTRANT -c
> > > > > bs_vector.c
> > > > > > gcc -g -Wall -I//usr/include -I//usr/include/cairo -I//usr/include/SDL -D_GNU_SOURCE=1 -
> > D_REENTRANT -c
> > > > > bs_pointmass.c
> > > > > > gcc -g -Wall -I//usr/include -I//usr/include/cairo -I//usr/include/SDL -D_GNU_SOURCE=1 -
> > D_REENTRANT -c
> > > > > bs_joint.c
> > > > > > gcc -g -Wall -I//usr/include -I//usr/include/cairo -I//usr/include/SDL -D_GNU_SOURCE=1 -
> > D_REENTRANT -c
> > > > > bs_stick.c
> > > > > > gcc -g -Wall -I//usr/include -I//usr/include/cairo -I//usr/include/SDL -D_GNU_SOURCE=1 -
> > D_REENTRANT -c
> > > > bs_env.c
> > > > > > gcc -g -Wall -I//usr/include -I//usr/include/cairo -I//usr/include/SDL -D_GNU_SOURCE=1 -
> > D_REENTRANT -c
> > > > > bs_array.c
> > > > > > gcc -g -Wall -I//usr/include -I//usr/include/cairo -I//usr/include/SDL -D_GNU_SOURCE=1 -
> > D_REENTRANT -c
> > > > > bs_blob.c
> > > > > > gcc -g -Wall -I//usr/include -I//usr/include/cairo -I//usr/include/SDL -D_GNU_SOURCE=1 -
> > D_REENTRANT -c
> > > > > bs_blob_collective.c
> > > > > > gcc -g -Wall -I//usr/include -I//usr/include/cairo -I//usr/include/SDL -D_GNU_SOURCE=1 -
> > D_REENTRANT -c
> > > > > bs_cairo.c
> > > > > > gcc -g -Wall -I//usr/include -I//usr/include/cairo -I//usr/include/SDL -D_GNU_SOURCE=1 -
> > D_REENTRANT -c
> > > bs_util.c
> > > > > > gcc -g -Wall -I//usr/include -I//usr/include/cairo -I//usr/include/SDL -D_GNU_SOURCE=1 -
> > D_REENTRANT -c
> > > bs_list.c
> > > > > > gcc -g -Wall -I//usr/include -I//usr/include/cairo -I//usr/include/SDL -D_GNU_SOURCE=1 -
> > D_REENTRANT -c
> > > > > bs_octree.c
> > > > > > bs_octree.c:493:1: warning: 'bs_octree_draw_nodes' defined but not used [-Wunused-function]
> > > > > > bs_octree_draw_nodes(bs_octree_node_t *pNode,
> > > > > > ^
> > > > > > gcc -g -Wall -I//usr/include -I//usr/include/cairo -I//usr/include/SDL -D_GNU_SOURCE=1 -
> > D_REENTRANT -c
> > > > > bs_vector_util.c
> > > > > > gcc -g -Wall -I//usr/include -I//usr/include/cairo -I//usr/include/SDL -D_GNU_SOURCE=1 -
> > D_REENTRANT -c
> > > > > bs_profiler.c
> > > > > > gcc -g -Wall -I//usr/include -I//usr/include/cairo -I//usr/include/SDL -D_GNU_SOURCE=1 -
> > D_REENTRANT -c
> > > > > bs_rubberband.c
> > > > > > bs_rubberband.c: In function 'bs_rubberband_create':
> > > > > > bs_rubberband.c:13:20: warning: unused variable 'p' [-Wunused-variable]
> > > > > > bs_int32_t i, j, p;
> > > > > > ^
> > > > > > bs_rubberband.c: In function 'bs_rubberband_sc':
> > > > > > bs_rubberband.c:57:20: warning: unused variable 'k' [-Wunused-variable]
> > > > > > bs_int32_t i, j, k;
> > > > > > ^
> > > > > > gcc -g -o blobsallad bs_main.o bs_vector.o bs_pointmass.o bs_joint.o bs_stick.o bs_env.o
> > bs_array.o
> > > bs_blob.o
> > > > > bs_blob_collective.o
> > > > > > bs_cairo.o bs_util.o bs_list.o bs_octree.o bs_vector_util.o bs_profiler.o bs_rubberband.o -Wl,-
> > rpath-
> > > link=//usr/lib -
> > > > > L//usr/lib -lcairo -
> > > > > > lSDL -lpthread -lm
> > > > > > Fuego test_build duration=1.58455991745 seconds
> > > > > > ##### doing fuego phase: deploy ########
> > > > > > ##### doing fuego phase: pre_deploy ########
> > > > > > ##### doing fuego phase: test_deploy ########
> > > > > > ##### doing fuego phase: post_deploy ########
> > > > > > ##### doing fuego phase: run ########
> > > > > > WARNING: test log file parameter empty, so will use default
> > > > > > number of blobs: 2
> > > > > > 2 objects = 19.93 fps
> > > > > > number of blobs: 3
> > > > > > number of blobs: 4
> > > > > > 4 objects = 19.54 fps
> > > > > > number of blobs: 5
> > > > > > number of blobs: 6
> > > > > > number of blobs: 7
> > > > > > number of blobs: 8
> > > > > > 8 objects = 19.78 fps
> > > > > > number of blobs: 9
> > > > > > number of blobs: 10
> > > > > > number of blobs: 11
> > > > > > number of blobs: 12
> > > > > > number of blobs: 13
> > > > > > number of blobs: 14
> > > > > > number of blobs: 15
> > > > > > number of blobs: 16
> > > > > > 16 objects = 18.50 fps
> > > > > > ##### doing fuego phases: get_testlog AND processing ########
> > > > > >
> > > > > > RESULT ANALYSIS
> > > > > >
> > > > > > running python with
> > PATH=/usr/local/bin:/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games
> > > > > > Reading current values from /fuego-
> > rw/logs/Benchmark.blobsallad/docker.default.13.13/testlog.txt
> > > > > > Test section 8_objects: test result 19.78 satisfies (ge) threshold 1.
> > > > > > Test section 2_objects: test result 19.93 satisfies (ge) threshold 1.
> > > > > > Test section 4_objects: test result 19.54 satisfies (ge) threshold 1.
> > > > > > Test section 16_objects: test result 18.50 satisfies (ge) threshold 1.
> > > > > > Data file /fuego-rw/logs/Benchmark.blobsallad/plot.data was updated.
> > > > > > Reading plot data from /fuego-rw/logs/Benchmark.blobsallad/plot.data
> > > > > > Traceback (most recent call last):
> > > > > > File "/fuego-core/engine/tests/Benchmark.blobsallad/parser.py", line 22, in <module>
> > > > > > sys.exit(plib.process_data(ref_section_pat, cur_dict, 's', 'FPS'))
> > > > > > File "/fuego-core/engine/scripts/parser/common.py", line 98, in process_data
> > > > > > create_plot(label)
> > > > > > File "/fuego-core/engine/scripts/parser/common.py", line 260, in create_plot
> > > > > > ax.plot(plotrange, test_results_data.get(key).split(",")[-bnum:], 'o-', label='Test '+key)
> > > > > > File "/usr/lib/python2.7/dist-packages/matplotlib/axes/_axes.py", line 1374, in plot
> > > > > > for line in self._get_lines(*args, **kwargs):
> > > > > > File "/usr/lib/python2.7/dist-packages/matplotlib/axes/_base.py", line 303, in _grab_next_args
> > > > > > for seg in self._plot_args(remaining, kwargs):
> > > > > > File "/usr/lib/python2.7/dist-packages/matplotlib/axes/_base.py", line 281, in _plot_args
> > > > > > x, y = self._xy_from_xy(x, y)
> > > > > > File "/usr/lib/python2.7/dist-packages/matplotlib/axes/_base.py", line 223, in _xy_from_xy
> > > > > > raise ValueError("x and y must have same first dimension")
> > > > > > ValueError: x and y must have same first dimension
> > > > > > in signal_handler
> > > > > > ##### doing fuego phase: post_test ########
> > > > > > Going to check 1 fail cases for docker.default.Benchmark.blobsallad
> > > > > > Build step 'Execute shell' marked build as failure
> > > > > > [description-setter] Description set: <a
> > > > > >
> > href="/fuego/userContent/fuego.logs/Benchmark.blobsallad/docker.default.13.13/testlog.txt">log</a>
> > > > > > Finished: FAILURE
> > > > > >
> > > > > > > -----Original Message-----
> > > > > > > From: fuego-bounces at lists.linuxfoundation.org <mailto:fuego-
> > bounces at lists.linuxfoundation.org> <mailto:fuego-bounces at lists.linuxfoundation.org <mailto:fuego-
> > bounces at lists.linuxfoundation.org> >
> > > <mailto:fuego-bounces at lists.linuxfoundation.org <mailto:fuego-bounces at lists.linuxfoundation.org>
> > <mailto:fuego-bounces at lists.linuxfoundation.org <mailto:fuego-bounces at lists.linuxfoundation.org> > >
> > > > <mailto:fuego-bounces at lists.linuxfoundation.org <mailto:fuego-bounces at lists.linuxfoundation.org>
> > <mailto:fuego-bounces at lists.linuxfoundation.org <mailto:fuego-bounces at lists.linuxfoundation.org> > <mailto:fuego-
> > <mailto:fuego->
> > > bounces at lists.linuxfoundation.org <mailto:bounces at lists.linuxfoundation.org> <mailto:fuego-
> > bounces at lists.linuxfoundation.org <mailto:fuego-bounces at lists.linuxfoundation.org> > > >
> > > > > <mailto:fuego-bounces at lists.linuxfoundation.org <mailto:fuego-bounces at lists.linuxfoundation.org>
> > <mailto:fuego-bounces at lists.linuxfoundation.org <mailto:fuego-bounces at lists.linuxfoundation.org> > <mailto:fuego-
> > <mailto:fuego->
> > > bounces at lists.linuxfoundation.org <mailto:bounces at lists.linuxfoundation.org> <mailto:fuego-
> > bounces at lists.linuxfoundation.org <mailto:fuego-bounces at lists.linuxfoundation.org> > > <mailto:fuego- <mailto:fuego->
> > <mailto:fuego- <mailto:fuego-> >
> >
> > > > bounces at lists.linuxfoundation.org <mailto:bounces at lists.linuxfoundation.org>
> > <mailto:bounces at lists.linuxfoundation.org <mailto:bounces at lists.linuxfoundation.org> > <mailto:fuego- <mailto:fuego->
> >
> > > bounces at lists.linuxfoundation.org <mailto:bounces at lists.linuxfoundation.org> <mailto:fuego-
> > bounces at lists.linuxfoundation.org <mailto:fuego-bounces at lists.linuxfoundation.org> > > > > [mailto:fuego- <mailto:fuego->
> > <mailto:fuego- <mailto:fuego-> >
> > > <mailto:fuego- <mailto:fuego-> <mailto:fuego- <mailto:fuego-> > >
> > > > > <mailto:fuego- <mailto:fuego-> <mailto:fuego- <mailto:fuego-> > <mailto:fuego- <mailto:fuego->
> > <mailto:fuego- <mailto:fuego-> > > >
> > > > > > bounces at lists.linuxfoundation.org <mailto:bounces at lists.linuxfoundation.org>
> > <mailto:bounces at lists.linuxfoundation.org <mailto:bounces at lists.linuxfoundation.org> >
> > > <mailto:bounces at lists.linuxfoundation.org <mailto:bounces at lists.linuxfoundation.org>
> > <mailto:bounces at lists.linuxfoundation.org <mailto:bounces at lists.linuxfoundation.org> > >
> > >
> >
> > > > <mailto:bounces at lists.linuxfoundation.org <mailto:bounces at lists.linuxfoundation.org>
> > <mailto:bounces at lists.linuxfoundation.org <mailto:bounces at lists.linuxfoundation.org> >
> >
> > > <mailto:bounces at lists.linuxfoundation.org <mailto:bounces at lists.linuxfoundation.org>
> > <mailto:bounces at lists.linuxfoundation.org <mailto:bounces at lists.linuxfoundation.org> > > > <mailto:fuego- <mailto:fuego->
> > <mailto:fuego- <mailto:fuego-> >
> > > <mailto:fuego- <mailto:fuego-> <mailto:fuego- <mailto:fuego-> > >
> > > > > bounces at lists.linuxfoundation.org <mailto:bounces at lists.linuxfoundation.org>
> > <mailto:bounces at lists.linuxfoundation.org <mailto:bounces at lists.linuxfoundation.org> >
> > > <mailto:bounces at lists.linuxfoundation.org <mailto:bounces at lists.linuxfoundation.org>
> > <mailto:bounces at lists.linuxfoundation.org <mailto:bounces at lists.linuxfoundation.org> > > <mailto:fuego- <mailto:fuego->
> > <mailto:fuego- <mailto:fuego-> >
> > > > bounces at lists.linuxfoundation.org <mailto:bounces at lists.linuxfoundation.org>
> > <mailto:bounces at lists.linuxfoundation.org <mailto:bounces at lists.linuxfoundation.org> > <mailto:fuego- <mailto:fuego->
> > > bounces at lists.linuxfoundation.org <mailto:bounces at lists.linuxfoundation.org> <mailto:fuego-
> > bounces at lists.linuxfoundation.org <mailto:fuego-bounces at lists.linuxfoundation.org> > > > > ] On Behalf Of Dhinakar
> > > > > > > Kalyanasundaram
> > > > > > > Sent: Wednesday, May 24, 2017 4:20 PM
> > > > > > > Benchmark.blobsallad test build failing on my x86 64-bit ubuntu pc.
> > > > > > >
> > > > > > > Jenkins job console error -> ->
> > > > > > >
> > > > > > > /tmp/hudson4393205057432627536.sh: line 10: 19407 Killed timeout --signal=9 100m /bin/bash
> > > > > > > $FUEGO_CORE/engine/tests/${TESTDIR}/${TESTNAME}.sh
> > > > > > > Build step 'Execute shell' marked build as failure
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > Can anyone please let me know if they have executed this test and passed?
> > > > > >
> > > > > > I haven't tried this one yet. >From what I see at https://blobsallad.se/ it looks
> > > > > > like it probably has dependencies for the SDK such as SDL and Cairo.
> > > > > > Do you have libsdl-dev and libcairo-dev installed?
> > > > > > Since it's graphical you will need a target with X (it's not going to work on docker)
> > > > > > Can you check the build log and send the line that causes the failure?
> > > > > > "> Build step 'Execute shell' marked build as failure" provides no information.
> > > > > >
> > > > > > By the way, could you send your emails in clear text instead of html? Most of your mails
> > > > > > can't be seen on the archive because of that:
> > > > > > https://lists.linuxfoundation.org/pipermail/fuego/2017-May/000669.html
> > <https://lists.linuxfoundation.org/pipermail/fuego/2017-May/000669.html>
> > > <https://lists.linuxfoundation.org/pipermail/fuego/2017-May/000669.html
> > <https://lists.linuxfoundation.org/pipermail/fuego/2017-May/000669.html> >
> > > > <https://lists.linuxfoundation.org/pipermail/fuego/2017-May/000669.html
> > <https://lists.linuxfoundation.org/pipermail/fuego/2017-May/000669.html>
> > > <https://lists.linuxfoundation.org/pipermail/fuego/2017-May/000669.html
> > <https://lists.linuxfoundation.org/pipermail/fuego/2017-May/000669.html> > >
> > > > > <https://lists.linuxfoundation.org/pipermail/fuego/2017-May/000669.html
> > <https://lists.linuxfoundation.org/pipermail/fuego/2017-May/000669.html>
> > > <https://lists.linuxfoundation.org/pipermail/fuego/2017-May/000669.html
> > <https://lists.linuxfoundation.org/pipermail/fuego/2017-May/000669.html> >
> > > > <https://lists.linuxfoundation.org/pipermail/fuego/2017-May/000669.html
> > <https://lists.linuxfoundation.org/pipermail/fuego/2017-May/000669.html>
> > > <https://lists.linuxfoundation.org/pipermail/fuego/2017-May/000669.html
> > <https://lists.linuxfoundation.org/pipermail/fuego/2017-May/000669.html> > > >
> > > > > <https://lists.linuxfoundation.org/pipermail/fuego/2017-
> > <https://lists.linuxfoundation.org/pipermail/fuego/2017-> <https://lists.linuxfoundation.org/pipermail/fuego/2017-
> > <https://lists.linuxfoundation.org/pipermail/fuego/2017-> >
> > > <https://lists.linuxfoundation.org/pipermail/fuego/2017- <https://lists.linuxfoundation.org/pipermail/fuego/2017->
> > <https://lists.linuxfoundation.org/pipermail/fuego/2017- <https://lists.linuxfoundation.org/pipermail/fuego/2017-> > >
> > > > <https://lists.linuxfoundation.org/pipermail/fuego/2017-
> > <https://lists.linuxfoundation.org/pipermail/fuego/2017-> <https://lists.linuxfoundation.org/pipermail/fuego/2017-
> > <https://lists.linuxfoundation.org/pipermail/fuego/2017-> >
> > > <https://lists.linuxfoundation.org/pipermail/fuego/2017- <https://lists.linuxfoundation.org/pipermail/fuego/2017->
> > <https://lists.linuxfoundation.org/pipermail/fuego/2017- <https://lists.linuxfoundation.org/pipermail/fuego/2017-> > > >
> > > > > > May/000669.html>
> > > > > >
> > > > > > Thanks
> > > > > > Daniel
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > >
> > > >
> > > >
> > > >
> > >
> > >
> > >
> > >
> > >
> >
> >
> >
> >
> >
>
>
>
> _______________________________________________
> Fuego mailing list
> Fuego at lists.linuxfoundation.org
> https://lists.linuxfoundation.org/mailman/listinfo/fuego
More information about the Fuego
mailing list