[Fuego] Benchmark.blobsallad test build failing on my x86 64-bit ubuntu pc

dhinakar k dhinakar.k at gmail.com
Wed Jun 28 03:59:23 UTC 2017


Sure I will run the test manually outside Fuego and verify.

Thanks,
Dhinakar

On Jun 27, 2017 11:48 AM, "Daniel Sangorrin" <daniel.sangorrin at toshiba.co.jp>
wrote:

> 1) The test is not working on your setup at all (it doesn't even generate
a lot).

lot -> log

> 2) The parser is not generating a failed run.json
>
> For problem 1) I suggest you try to run it manually (not from JSON) until
it works
> on your setup.

JSON -> Fuego


>
> I will solve problem 2) soon, but if you fix 1) then it should work.
>
> Thanks,
> Daniel
>
>
>
> >
> > Regards,
> > Dhinakar
> >
> > On Jun 26, 2017 9:51 AM, "dhinakar k" <dhinakar.k at gmail.com <mailto:
dhinakar.k at gmail.com> > wrote:
> >
> >
> >     Thanks Daniel, I will wait for that patch.
> >
> >     Regards,
> >     Dhinakar
> >
> >     On Jun 26, 2017 5:47 AM, "Daniel Sangorrin" <
daniel.sangorrin at toshiba.co.jp <mailto:daniel.sangorrin at toshiba.co.jp> >
> > wrote:
> >
> >
> >             Hi Dhinakar,
> >
> >             Thanks for the feedback.
> >
> >             I think it's a problem that I have already fixed but not
released yet.
> >
> >             Could you check if
> >             /fuego-rw/logs/Benchmark.blobsallad/Ethernet-TRAV-X86-
Target.default.5.5/testlog.txt
> >             exists?
> >
> >             The parser was assuming that if the test didn't even
produce (probably because of [1]) a testlog.txt then
> >             there was nothing to parse. I will try to send a patch to
fix this issue and others soon.
> >
> >             Thanks,
> >             Daniel
> >
> >             [1] > Can't open display :0
> >
> >
> >
> >             > -----Original Message-----
> >             > From: dhinakar k [mailto:dhinakar.k at gmail.com <mailto:
dhinakar.k at gmail.com> ]
> >
> >             > Sent: Monday, June 26, 2017 5:33 AM
> >             > To: Daniel Sangorrin
> >             > Cc: fuego at lists.linuxfoundation.org <mailto:fuego at lists.
linuxfoundation.org>
> >
> >             > Subject: Re: Benchmark.blobsallad test build failing on
my x86 64-bit ubuntu pc
> >             >
> >             > Hi Daniel,
> >             >
> >             >
> >
> >             > Thanks for the response.
> >             >
> >             > I executed after deleting the log folder as you mentioned.
> >             >
> >             > Please check the log below.
> >             >
> >             > Any dependencies missing?
> >             >
> >             > Please check the log and let me know.
> >             >
> >             >
> >             > Regards,
> >             >
> >             > Dhinakar
> >             >
> >             > ##### doing fuego phase: build ########
> >             > Unpacking blobsallad-src.tar.bz2
> >             > gcc -g -Wall -I//usr/include -I//usr/include/cairo
-I//usr/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT -c
> > bs_main.c
> >             > gcc -g -Wall -I//usr/include -I//usr/include/cairo
-I//usr/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT -c
> > bs_vector.c
> >             > gcc -g -Wall -I//usr/include -I//usr/include/cairo
-I//usr/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT -c
> > bs_pointmass.c
> >             > gcc -g -Wall -I//usr/include -I//usr/include/cairo
-I//usr/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT -c
> > bs_joint.c
> >             > gcc -g -Wall -I//usr/include -I//usr/include/cairo
-I//usr/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT -c
> > bs_stick.c
> >             > gcc -g -Wall -I//usr/include -I//usr/include/cairo
-I//usr/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT -c bs_env.c
> >             > gcc -g -Wall -I//usr/include -I//usr/include/cairo
-I//usr/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT -c
> > bs_array.c
> >             > gcc -g -Wall -I//usr/include -I//usr/include/cairo
-I//usr/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT -c
> > bs_blob.c
> >             > gcc -g -Wall -I//usr/include -I//usr/include/cairo
-I//usr/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT -c
> > bs_blob_collective.c
> >             > gcc -g -Wall -I//usr/include -I//usr/include/cairo
-I//usr/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT -c
> > bs_cairo.c
> >             > gcc -g -Wall -I//usr/include -I//usr/include/cairo
-I//usr/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT -c bs_util.c
> >             > gcc -g -Wall -I//usr/include -I//usr/include/cairo
-I//usr/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT -c bs_list.c
> >             > gcc -g -Wall -I//usr/include -I//usr/include/cairo
-I//usr/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT -c
> > bs_octree.c
> >             > bs_octree.c:493:1: warning: 'bs_octree_draw_nodes'
defined but not used [-Wunused-function]
> >             >  bs_octree_draw_nodes(bs_octree_node_t *pNode,
> >             >  ^
> >             > gcc -g -Wall -I//usr/include -I//usr/include/cairo
-I//usr/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT -c
> > bs_vector_util.c
> >             > gcc -g -Wall -I//usr/include -I//usr/include/cairo
-I//usr/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT -c
> > bs_profiler.c
> >             > gcc -g -Wall -I//usr/include -I//usr/include/cairo
-I//usr/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT -c
> > bs_rubberband.c
> >             > bs_rubberband.c: In function 'bs_rubberband_create':
> >             > bs_rubberband.c:13:20: warning: unused variable 'p'
[-Wunused-variable]
> >             >    bs_int32_t i, j, p;
> >             >                     ^
> >             > bs_rubberband.c: In function 'bs_rubberband_sc':
> >             > bs_rubberband.c:57:20: warning: unused variable 'k'
[-Wunused-variable]
> >             >    bs_int32_t i, j, k;
> >             >                     ^
> >             > gcc -g -o blobsallad bs_main.o bs_vector.o bs_pointmass.o
bs_joint.o bs_stick.o bs_env.o bs_array.o bs_blob.o
> > bs_blob_collective.o
> >
> >             > bs_cairo.o bs_util.o bs_list.o bs_octree.o
bs_vector_util.o bs_profiler.o bs_rubberband.o -Wl,-rpath-link=//usr/lib -
> > L//usr/lib -lcairo -
> >             > lSDL -lpthread -lm
> >
> >             > Fuego test_build duration=6.51003742218 seconds
> >             > ##### doing fuego phase: deploy ########
> >             > ##### doing fuego phase: pre_deploy ########
> >             > ##### doing fuego phase: test_deploy ########
> >             > Warning: Permanently added '192.168.1.117' (ECDSA) to the
list of known hosts.
> >             > Warning: Permanently added '192.168.1.117' (ECDSA) to the
list of known hosts.
> >             > ##### doing fuego phase: post_deploy ########
> >             > ##### doing fuego phase: run ########
> >             > Warning: Permanently added '192.168.1.117' (ECDSA) to the
list of known hosts.
> >             > WARNING: test log file parameter empty, so will use
default
> >             > Warning: Permanently added '192.168.1.117' (ECDSA) to the
list of known hosts.
> >             > Warning: Permanently added '192.168.1.117' (ECDSA) to the
list of known hosts.
> >             > No protocol specified
> >             > Can't open display :0
> >             > Warning: Permanently added '192.168.1.117' (ECDSA) to the
list of known hosts.
> >             > Warning: Permanently added '192.168.1.117' (ECDSA) to the
list of known hosts.
> >             > ##### doing fuego phase: post_test ########
> >             > Warning: Permanently added '192.168.1.117' (ECDSA) to the
list of known hosts.
> >             > Warning: Permanently added '192.168.1.117' (ECDSA) to the
list of known hosts.
> >             > Warning: Permanently added '192.168.1.117' (ECDSA) to the
list of known hosts.
> >             > Warning: Permanently added '192.168.1.117' (ECDSA) to the
list of known hosts.
> >             > Warning: Permanently added '192.168.1.117' (ECDSA) to the
list of known hosts.
> >             > Warning: Permanently added '192.168.1.117' (ECDSA) to the
list of known hosts.
> >             > Teardown board link
> >             > ##### doing fuego phase: processing ########
> >             > Going to check 1 fail cases for Ethernet-TRAV-X86-Target.
default.Benchmark.blobsallad
> >             > No fail cases detected for Ethernet-TRAV-X86-Target.
default.Benchmark.blobsallad
> >             > running python with PATH=/usr/local/bin:/usr/
local/bin:/usr/bin:/bin:/usr/local/games:/usr/games
> >             > Reading current values from /fuego-rw/logs/Benchmark.
blobsallad/Ethernet-TRAV-X86-
> > Target.default.5.5/testlog.txt
> >             >
> >             > *** ABORTED ***
> >             >
> >             > Fuego error reason: ERROR: problem while running the
parser
> >             >
> >             > Build was aborted
> >
> >             > Aborted by unknown <http://localhost:8080/fuego/
user/unknown <http://localhost:8080/fuego/user/unknown> >
> >
> >             > Terminated
> >             > [description-setter] Description set: <a
href="/fuego/userContent/fuego.logs/Benchmark.blobsallad/Ethernet-
> > TRAV-X86-
> >             > Target.default.5.5/testlog.txt">log</a>
> >             > Finished: ABORTED
> >             >
> >
> >             > On Fri, Jun 23, 2017 at 11:27 AM, Daniel Sangorrin <
daniel.sangorrin at toshiba.co.jp
> > <mailto:daniel.sangorrin at toshiba.co.jp>  <mailto:daniel.sangorrin@
toshiba.co.jp <mailto:daniel.sangorrin at toshiba.co.jp> > >
> wrote:
> >             >
> >             >
> >             >       Hi Dhinakar,
> >             >
> >
> >             >       Sorry for the long delay.
> >             >
> >             >       Could you do the following and try again?
> >             >
> >             >       # rm -rf /fuego-rw/logs/Benchmark.blobsallad
> >             >
> >             >       Thanks,
> >             >       Daniel
> >             >
> >             >
> >             >       > -----Original Message-----
> >
> >             >       > From: dhinakar k [mailto:dhinakar.k at gmail.com
<mailto:dhinakar.k at gmail.com>
> > <mailto:dhinakar.k at gmail.com <mailto:dhinakar.k at gmail.com> > ]
> >             >       > Sent: Friday, June 09, 2017 10:48 AM
> >             >       > To: Daniel Sangorrin
> >
> >             >       > Cc: fuego at lists.linuxfoundation.org <mailto:
fuego at lists.linuxfoundation.org>
> > <mailto:fuego at lists.linuxfoundation.org <mailto:fuego at lists.
linuxfoundation.org> >
> >             >       > Subject: RE: Benchmark.blobsallad test build
failing on my x86 64-bit ubuntu pc
> >             >       >
> >             >       > Fine Daniel, thanks for the response.
> >             >       >
> >             >       > Regards,
> >             >       > Dhinakar
> >             >       >
> >             >       > On Jun 9, 2017 5:38 AM, "Daniel Sangorrin" <
daniel.sangorrin at toshiba.co.jp
> > <mailto:daniel.sangorrin at toshiba.co.jp>  <mailto:daniel.sangorrin@
toshiba.co.jp <mailto:daniel.sangorrin at toshiba.co.jp> >
> >
> >             > <mailto:daniel.sangorrin at toshiba.co.jp <mailto:
daniel.sangorrin at toshiba.co.jp>
> > <mailto:daniel.sangorrin at toshiba.co.jp <mailto:daniel.sangorrin@
toshiba.co.jp> > > > wrote:
> >             >       >
> >             >       >
> >             >       >       Hi Dhinakar,
> >             >       >
> >
> >             >       >       Sorry for the delay.
> >             >       >       Thanks for reporting. I will look at it
when I have time (sorry, I'm busy at the moment).
> >             >       >
> >             >       >       Tim: how should we manage issues/bugs? I
can't find the "issues" functionality
> >             >       >       that github provides on bitbucket.
> >             >       >
> >             >       >       Thanks,
> >             >       >       Daniel
> >             >       >
> >             >       >       > -----Original Message-----
> >
> >             >       >       > From: dhinakar k [mailto:
dhinakar.k at gmail.com <mailto:dhinakar.k at gmail.com>
> > <mailto:dhinakar.k at gmail.com <mailto:dhinakar.k at gmail.com> >  <mailto:
dhinakar.k at gmail.com <mailto:dhinakar.k at gmail.com>
> >             > <mailto:dhinakar.k at gmail.com <mailto:dhinakar.k at gmail.com>
> > ]
> >             >       >       > Sent: Tuesday, June 06, 2017 1:52 AM
> >             >       >       > To: Daniel Sangorrin
> >             >
> >             >       >       > Cc: fuego at lists.linuxfoundation.org
<mailto:fuego at lists.linuxfoundation.org>
> > <mailto:fuego at lists.linuxfoundation.org <mailto:fuego at lists.
linuxfoundation.org> >
> >
> >             > <mailto:fuego at lists.linuxfoundation.org <mailto:
fuego at lists.linuxfoundation.org>
> > <mailto:fuego at lists.linuxfoundation.org <mailto:fuego at lists.
linuxfoundation.org> > >
> >
> >             >       >       > Subject: Re: Benchmark.blobsallad test
build failing on my x86 64-bit ubuntu pc
> >             >       >       >
> >             >       >       > Hi Daniel,
> >             >       >       >
> >             >       >       >
> >             >       >       > It seems the parser has an issue. I
posted in another thread about it.
> >             >       >       >
> >             >       >       > But thought of posting the error log here
for your reference.
> >             >       >       >
> >             >       >       > Please check and confirm.
> >             >       >       >
> >             >       >       >
> >             >       >       > ##### doing fuego phase: processing
########
> >             >       >       > + processing
> >             >       >       > + local RETURN_VALUE=0
> >             >       >       > + call_if_present test_processing
> >             >       >       > + declare -f -F test_processing
> >             >       >       > + return 0
> >             >       >       > + '[' 0 -ne 0 ']'
> >             >       >       > + fail_check_cases
> >             >       >       > + testlog=/fuego-rw/logs/
Benchmark.blobsallad/ubuntu-x86-target.default.3.3/testlog.txt
> >             >       >       > + slog_prefix=/fuego-rw/logs/
Benchmark.blobsallad/ubuntu-x86-target.default.3.3/syslog
> >             >       >       > ++ tr . _
> >             >       >       > ++ echo BENCHMARK.BLOBSALLAD
> >             >       >       > + upName=BENCHMARK_BLOBSALLAD
> >             >       >       > + fcname=BENCHMARK_BLOBSALLAD_
FAIL_CASE_COUNT
> >             >       >       > + fcc=1
> >             >       >       > + '[' -z 1 ']'
> >             >       >       > + echo 'Going to check 1 fail cases for
ubuntu-x86-target.default.Benchmark.blobsallad'
> >             >       >       > Going to check 1 fail cases for
ubuntu-x86-target.default.Benchmark.blobsallad
> >             >       >       > + fcc=0
> >             >       >       > ++ seq 0 0
> >             >       >       > + for n in '$(seq 0 $fcc)'
> >             >       >       > + fpvarname=BENCHMARK_
BLOBSALLAD_FAIL_REGEXP_0
> >             >       >       > + fpvarmsg=BENCHMARK_BLOBSALLAD_
FAIL_MESSAGE_0
> >             >       >       > + fpvarslog=BENCHMARK_
BLOBSALLAD_FAIL_0_SYSLOG
> >             >       >       > + fptemplate='xrandr: command not found'
> >             >       >       > + fpmessage='target system does not have
xrandr'
> >             >       >       > + fpslog=
> >             >       >       > + '[' '!' -z '' ']'
> >             >       >       > + grep -e 'xrandr: command not found'
/fuego-rw/logs/Benchmark.blobsallad/ubuntu-x86-
> >             > target.default.3.3/testlog.txt
> >             >       >       > + echo 'No fail cases detected for
ubuntu-x86-target.default.Benchmark.blobsallad'
> >             >       >       > No fail cases detected for
ubuntu-x86-target.default.Benchmark.blobsallad
> >             >       >       > + '[' 0 -ne 0 ']'
> >             >       >       > + syslog_cmp
> >             >       >       > + PREFIX=/fuego-rw/logs/
Benchmark.blobsallad/ubuntu-x86-target.default.3.3/syslog
> >             >       >       > + rc=0
> >             >       >       > + '[' -f /fuego-rw/logs/Benchmark.
blobsallad/ubuntu-x86-target.default.3.3/syslog.before.txt ']'
> >             >       >       > + diff -ua /fuego-rw/logs/Benchmark.
blobsallad/ubuntu-x86-target.default.3.3/syslog.before.txt /fuego-
> >             >       >       > rw/logs/Benchmark.blobsallad/
ubuntu-x86-target.default.3.3/syslog.after.txt
> >             >       >       > + grep -vEf /fuego-core/engine/scripts/
syslog.ignore
> >             >       >       > + grep -E -e '\.(Bug:|Oops)'
> >             >       >       > + '[' 0 -eq 1 ']'
> >             >       >       > + return 0
> >             >       >       > + '[' 0 -ne 0 ']'
> >             >       >       > + PYTHON_ARGS='-W
ignore::DeprecationWarning -W ignore::UserWarning'
> >             >       >       > + '[' -e /fuego-core/engine/tests/Benchmark.blobsallad/parser.py
']'
> >             >       >       > + run_python -W
ignore::DeprecationWarning -W ignore::UserWarning /fuego-
> >             >       > core/engine/tests/Benchmark.blobsallad/parser.py
> >             >       >       > + '[' '!' -z
/usr/local/bin:/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games ']'
> >             >       >       > + echo 'running python with
> > PATH=/usr/local/bin:/usr/local/bin:/usr/bin:/bin:/usr/
local/games:/usr/games'
> >             >       >       > running python with
PATH=/usr/local/bin:/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games
> >             >       >       > + PATH=/usr/local/bin:/usr/
local/bin:/usr/bin:/bin:/usr/local/games:/usr/games
> >             >       >       > + python -W ignore::DeprecationWarning -W
ignore::UserWarning /fuego-
> >             >       > core/engine/tests/Benchmark.blobsallad/parser.py
> >             >       >       > Reading current values from
/fuego-rw/logs/Benchmark.blobsallad/ubuntu-x86-
> > target.default.3.3/testlog.txt
> >             >       >       > + rc=1
> >             >       >       > + '[' 1 -eq 0 ']'
> >             >       >       > + '[' 1 -eq 2 ']'
> >             >       >       > + '[' 1 -eq 3 ']'
> >             >       >       > + abort_job 'ERROR: problem while running
the parser'
> >             >       >       > + set +x
> >             >       >       >
> >             >       >       > *** ABORTED ***
> >             >       >       >
> >             >       >       > Fuego error reason: ERROR: problem while
running the parser
> >             >       >       >
> >             >       >       > Build step 'Execute shell' marked build
as failure
> >             >       >       > [description-setter] Description set:  <a
> > href="/fuego/userContent/fuego.logs/Benchmark.blobsallad/ubuntu-x86-
> >             >       >       > target.default.3.3/testlog.txt">log</a>
> >             >       >       > Finished: FAILURE
> >             >       >       >
> >             >       >       > Regards,
> >             >       >       > Dhinakar
> >             >       >       >
> >             >       >       > On Fri, May 26, 2017 at 5:43 PM, dhinakar
k <dhinakar.k at gmail.com <mailto:dhinakar.k at gmail.com>
> > <mailto:dhinakar.k at gmail.com <mailto:dhinakar.k at gmail.com> >
> >             > <mailto:dhinakar.k at gmail.com <mailto:dhinakar.k at gmail.com>
<mailto:dhinakar.k at gmail.com
> > <mailto:dhinakar.k at gmail.com> > >
> >             >
> >
> >             >       > <mailto:dhinakar.k at gmail.com <mailto:
dhinakar.k at gmail.com>  <mailto:dhinakar.k at gmail.com
> > <mailto:dhinakar.k at gmail.com> >  <mailto:dhinakar.k at gmail.com <mailto:
dhinakar.k at gmail.com>
> >
> >             > <mailto:dhinakar.k at gmail.com <mailto:dhinakar.k at gmail.com>
> > > > wrote:
> >             >       >       >
> >             >       >       >
> >             >       >       >       Sure Daniel I will check and let
you know.
> >             >       >       >
> >             >       >       >       Regards,
> >             >       >       >       Dhinakar​
> >             >       >       >
> >             >       >       >       On May 26, 2017 6:43 AM, "Daniel
Sangorrin" <daniel.sangorrin at toshiba.co.jp
> > <mailto:daniel.sangorrin at toshiba.co.jp>
> >             > <mailto:daniel.sangorrin at toshiba.co.jp <mailto:
daniel.sangorrin at toshiba.co.jp> >
> > <mailto:daniel.sangorrin at toshiba.co.jp <mailto:daniel.sangorrin@
toshiba.co.jp>  <mailto:daniel.sangorrin at toshiba.co.jp
> > <mailto:daniel.sangorrin at toshiba.co.jp> > >
> >             >       > <mailto:daniel.sangorrin at toshiba.co.jp <mailto:
daniel.sangorrin at toshiba.co.jp>
> > <mailto:daniel.sangorrin at toshiba.co.jp <mailto:daniel.sangorrin@
toshiba.co.jp> >  <mailto:daniel.sangorrin at toshiba.co.jp
> > <mailto:daniel.sangorrin at toshiba.co.jp>
> >             > <mailto:daniel.sangorrin at toshiba.co.jp <mailto:
daniel.sangorrin at toshiba.co.jp> > > > >
> >             >       >       > wrote:
> >             >       >       >
> >             >       >       >
> >             >       >       >               Hi Dhinakar,
> >             >       >       >
> >             >       >       >               > -----Original Message-----
> >             >
> >             >       >       >               > From: dhinakar k [mailto:
dhinakar.k at gmail.com <mailto:dhinakar.k at gmail.com>
> > <mailto:dhinakar.k at gmail.com <mailto:dhinakar.k at gmail.com> >
> >
> >             > <mailto:dhinakar.k at gmail.com <mailto:dhinakar.k at gmail.com>
<mailto:dhinakar.k at gmail.com
> > <mailto:dhinakar.k at gmail.com> > >  <mailto:dhinakar.k at gmail.com <mailto:
dhinakar.k at gmail.com>
> <mailto:dhinakar.k at gmail.com
> > <mailto:dhinakar.k at gmail.com> >
> >
> >             >       > <mailto:dhinakar.k at gmail.com <mailto:
dhinakar.k at gmail.com>  <mailto:dhinakar.k at gmail.com
> > <mailto:dhinakar.k at gmail.com> > > > ]
> >             >       >       >               > Sent: Thursday, May 25,
2017 3:56 AM
> >             >       >       >               > Yes you are right
blobsallad is dependent on sdl, cairo and x11. I installed the following in
the
> > docker container
> >             > as
> >             >       >       > well as on my x86 64-
> >             >       >       >               > bit ubuntu host. One
question here, for all such tests (functional or benchmark) do I need to
install
> > the
> >             >       >       > dependencies in docker as well
> >             >       >       >               > as host before the start
of the test? Also, how is it done in case of arm based target boards?
> > Should I install the
> >             >       >       > dependencies on the
> >             >       >       >               > target board?
> >             >       >       >               >
> >             >       >       >               > sudo apt-get install
libsdl1.2-dev libsdl1.2debian
> >             >       >       >               > sudo apt-get install
libcairo2-dev
> >             >       >       >               > sudo apt-get install
x11-xserver-utils
> >             >       >       >               >
> >             >       >       >               > It got built, deployed
and ran successfully (see the results below). But still the test result is a
> > failure. I am not
> >             > sure
> >             >       >       > why it did not
> >             >       >       >               > succeed. May be some
problem in plotting. I have pasted the log at the end of this email. Please
> > check and let
> >             > me
> >             >       >       > know what could be
> >             >       >       >               > issue.
> >             >       >       >
> >             >       >       >               Thanks for the log. It
looks like a bug in the parser (common.py file), maybe one that I fixed on
the
> > next branch
> >             > (see
> >             >       >       > patch "parser: fix bug in the parser").
> >             >       >       >               Could you check with the
next branch or apply that patch to master and see if it works?
> >             >       >       >
> >             >       >       >               Thanks,
> >             >       >       >               Daniel
> >             >       >       >
> >             >       >       >
> >             >       >       >               >
> >             >       >       >               >
> >             >       >       >               > Note: Sorry about the
html based emails, my official email client seems to be configured that way.
> > I didn't think
> >             > it
> >             >       >       > was because of that.
> >             >       >       >               > Thanks for pointing it
out. I will take care of it from now on.
> >             >       >       >               >
> >             >       >       >               >
> >             >       >       >               > Regards,
> >             >       >       >               >
> >             >       >       >               > Dhinakar
> >             >       >       >               >
> >             >       >       >               > number of blobs: 2
> >             >       >       >               > 2 objects = 19.93 fps
> >             >       >       >               > number of blobs: 3
> >             >       >       >               > number of blobs: 4
> >             >       >       >               > 4 objects = 19.54 fps
> >             >       >       >               > number of blobs: 5
> >             >       >       >               > number of blobs: 6
> >             >       >       >               > number of blobs: 7
> >             >       >       >               > number of blobs: 8
> >             >       >       >               > 8 objects = 19.78 fps
> >             >       >       >               > number of blobs: 9
> >             >       >       >               > number of blobs: 10
> >             >       >       >               > number of blobs: 11
> >             >       >       >               > number of blobs: 12
> >             >       >       >               > number of blobs: 13
> >             >       >       >               > number of blobs: 14
> >             >       >       >               > number of blobs: 15
> >             >       >       >               > number of blobs: 16
> >             >       >       >               > 16 objects = 18.50 fps
> >             >       >       >               > LOG
> >             >       >       >               > *****
> >             >       >       >               >
> >             >       >       >               > ##### doing fuego phase:
build ########
> >             >       >       >               > gcc -g -Wall
-I//usr/include -I//usr/include/cairo -I//usr/include/SDL -D_GNU_SOURCE=1 -
> > D_REENTRANT -c
> >             >       >       > bs_main.c
> >             >       >       >               > gcc -g -Wall
-I//usr/include -I//usr/include/cairo -I//usr/include/SDL -D_GNU_SOURCE=1 -
> > D_REENTRANT -c
> >             >       >       > bs_vector.c
> >             >       >       >               > gcc -g -Wall
-I//usr/include -I//usr/include/cairo -I//usr/include/SDL -D_GNU_SOURCE=1 -
> > D_REENTRANT -c
> >             >       >       > bs_pointmass.c
> >             >       >       >               > gcc -g -Wall
-I//usr/include -I//usr/include/cairo -I//usr/include/SDL -D_GNU_SOURCE=1 -
> > D_REENTRANT -c
> >             >       >       > bs_joint.c
> >             >       >       >               > gcc -g -Wall
-I//usr/include -I//usr/include/cairo -I//usr/include/SDL -D_GNU_SOURCE=1 -
> > D_REENTRANT -c
> >             >       >       > bs_stick.c
> >             >       >       >               > gcc -g -Wall
-I//usr/include -I//usr/include/cairo -I//usr/include/SDL -D_GNU_SOURCE=1 -
> > D_REENTRANT -c
> >             >       > bs_env.c
> >             >       >       >               > gcc -g -Wall
-I//usr/include -I//usr/include/cairo -I//usr/include/SDL -D_GNU_SOURCE=1 -
> > D_REENTRANT -c
> >             >       >       > bs_array.c
> >             >       >       >               > gcc -g -Wall
-I//usr/include -I//usr/include/cairo -I//usr/include/SDL -D_GNU_SOURCE=1 -
> > D_REENTRANT -c
> >             >       >       > bs_blob.c
> >             >       >       >               > gcc -g -Wall
-I//usr/include -I//usr/include/cairo -I//usr/include/SDL -D_GNU_SOURCE=1 -
> > D_REENTRANT -c
> >             >       >       > bs_blob_collective.c
> >             >       >       >               > gcc -g -Wall
-I//usr/include -I//usr/include/cairo -I//usr/include/SDL -D_GNU_SOURCE=1 -
> > D_REENTRANT -c
> >             >       >       > bs_cairo.c
> >             >       >       >               > gcc -g -Wall
-I//usr/include -I//usr/include/cairo -I//usr/include/SDL -D_GNU_SOURCE=1 -
> > D_REENTRANT -c
> >             > bs_util.c
> >             >       >       >               > gcc -g -Wall
-I//usr/include -I//usr/include/cairo -I//usr/include/SDL -D_GNU_SOURCE=1 -
> > D_REENTRANT -c
> >             > bs_list.c
> >             >       >       >               > gcc -g -Wall
-I//usr/include -I//usr/include/cairo -I//usr/include/SDL -D_GNU_SOURCE=1 -
> > D_REENTRANT -c
> >             >       >       > bs_octree.c
> >             >       >       >               > bs_octree.c:493:1:
warning: 'bs_octree_draw_nodes' defined but not used [-Wunused-function]
> >             >       >       >               >  bs_octree_draw_nodes(bs_octree_node_t
*pNode,
> >             >       >       >               >  ^
> >             >       >       >               > gcc -g -Wall
-I//usr/include -I//usr/include/cairo -I//usr/include/SDL -D_GNU_SOURCE=1 -
> > D_REENTRANT -c
> >             >       >       > bs_vector_util.c
> >             >       >       >               > gcc -g -Wall
-I//usr/include -I//usr/include/cairo -I//usr/include/SDL -D_GNU_SOURCE=1 -
> > D_REENTRANT -c
> >             >       >       > bs_profiler.c
> >             >       >       >               > gcc -g -Wall
-I//usr/include -I//usr/include/cairo -I//usr/include/SDL -D_GNU_SOURCE=1 -
> > D_REENTRANT -c
> >             >       >       > bs_rubberband.c
> >             >       >       >               > bs_rubberband.c: In
function 'bs_rubberband_create':
> >             >       >       >               > bs_rubberband.c:13:20:
warning: unused variable 'p' [-Wunused-variable]
> >             >       >       >               >    bs_int32_t i, j, p;
> >             >       >       >               >                     ^
> >             >       >       >               > bs_rubberband.c: In
function 'bs_rubberband_sc':
> >             >       >       >               > bs_rubberband.c:57:20:
warning: unused variable 'k' [-Wunused-variable]
> >             >       >       >               >    bs_int32_t i, j, k;
> >             >       >       >               >                     ^
> >             >       >       >               > gcc -g -o blobsallad
bs_main.o bs_vector.o bs_pointmass.o bs_joint.o bs_stick.o bs_env.o
> > bs_array.o
> >             > bs_blob.o
> >             >       >       > bs_blob_collective.o
> >             >       >       >               > bs_cairo.o bs_util.o
bs_list.o bs_octree.o bs_vector_util.o bs_profiler.o bs_rubberband.o -Wl,-
> > rpath-
> >             > link=//usr/lib -
> >             >       >       > L//usr/lib -lcairo -
> >             >       >       >               > lSDL -lpthread -lm
> >             >       >       >               > Fuego test_build
duration=1.58455991745 seconds
> >             >       >       >               > ##### doing fuego phase:
deploy ########
> >             >       >       >               > ##### doing fuego phase:
pre_deploy ########
> >             >       >       >               > ##### doing fuego phase:
test_deploy ########
> >             >       >       >               > ##### doing fuego phase:
post_deploy ########
> >             >       >       >               > ##### doing fuego phase:
run ########
> >             >       >       >               > WARNING: test log file
parameter empty, so will use default
> >             >       >       >               > number of blobs: 2
> >             >       >       >               > 2 objects = 19.93 fps
> >             >       >       >               > number of blobs: 3
> >             >       >       >               > number of blobs: 4
> >             >       >       >               > 4 objects = 19.54 fps
> >             >       >       >               > number of blobs: 5
> >             >       >       >               > number of blobs: 6
> >             >       >       >               > number of blobs: 7
> >             >       >       >               > number of blobs: 8
> >             >       >       >               > 8 objects = 19.78 fps
> >             >       >       >               > number of blobs: 9
> >             >       >       >               > number of blobs: 10
> >             >       >       >               > number of blobs: 11
> >             >       >       >               > number of blobs: 12
> >             >       >       >               > number of blobs: 13
> >             >       >       >               > number of blobs: 14
> >             >       >       >               > number of blobs: 15
> >             >       >       >               > number of blobs: 16
> >             >       >       >               > 16 objects = 18.50 fps
> >             >       >       >               > ##### doing fuego phases:
get_testlog AND processing ########
> >             >       >       >               >
> >             >       >       >               >  RESULT ANALYSIS
> >             >       >       >               >
> >             >       >       >               > running python with
> > PATH=/usr/local/bin:/usr/local/bin:/usr/bin:/bin:/usr/
local/games:/usr/games
> >             >       >       >               > Reading current values
from /fuego-
> > rw/logs/Benchmark.blobsallad/docker.default.13.13/testlog.txt
> >             >       >       >               > Test section 8_objects:
test result 19.78 satisfies (ge) threshold 1.
> >             >       >       >               > Test section 2_objects:
test result 19.93 satisfies (ge) threshold 1.
> >             >       >       >               > Test section 4_objects:
test result 19.54 satisfies (ge) threshold 1.
> >             >       >       >               > Test section 16_objects:
test result 18.50 satisfies (ge) threshold 1.
> >             >       >       >               > Data file
/fuego-rw/logs/Benchmark.blobsallad/plot.data was updated.
> >             >       >       >               > Reading plot data from
/fuego-rw/logs/Benchmark.blobsallad/plot.data
> >             >       >       >               > Traceback (most recent
call last):
> >             >       >       >               >   File
"/fuego-core/engine/tests/Benchmark.blobsallad/parser.py", line 22, in
<module>
> >             >       >       >               >
 sys.exit(plib.process_data(ref_section_pat, cur_dict, 's', 'FPS'))
> >             >       >       >               >   File
"/fuego-core/engine/scripts/parser/common.py", line 98, in process_data
> >             >       >       >               >     create_plot(label)
> >             >       >       >               >   File
"/fuego-core/engine/scripts/parser/common.py", line 260, in create_plot
> >             >       >       >               >     ax.plot(plotrange,
test_results_data.get(key).split(",")[-bnum:], 'o-', label='Test '+key)
> >             >       >       >               >   File
"/usr/lib/python2.7/dist-packages/matplotlib/axes/_axes.py", line 1374, in
plot
> >             >       >       >               >     for line in
self._get_lines(*args, **kwargs):
> >             >       >       >               >   File
"/usr/lib/python2.7/dist-packages/matplotlib/axes/_base.py", line 303, in
_grab_next_args
> >             >       >       >               >     for seg in
self._plot_args(remaining, kwargs):
> >             >       >       >               >   File
"/usr/lib/python2.7/dist-packages/matplotlib/axes/_base.py", line 281, in
_plot_args
> >             >       >       >               >     x, y =
self._xy_from_xy(x, y)
> >             >       >       >               >   File
"/usr/lib/python2.7/dist-packages/matplotlib/axes/_base.py", line 223, in
_xy_from_xy
> >             >       >       >               >     raise ValueError("x
and y must have same first dimension")
> >             >       >       >               > ValueError: x and y must
have same first dimension
> >             >       >       >               > in signal_handler
> >             >       >       >               > ##### doing fuego phase:
post_test ########
> >             >       >       >               > Going to check 1 fail
cases for docker.default.Benchmark.blobsallad
> >             >       >       >               > Build step 'Execute
shell' marked build as failure
> >             >       >       >               > [description-setter]
Description set: <a
> >             >       >       >               >
> > href="/fuego/userContent/fuego.logs/Benchmark.
blobsallad/docker.default.13.13/testlog.txt">log</a>
> >             >       >       >               > Finished: FAILURE
> >             >       >       >               >
> >             >       >       >               > > -----Original
Message-----
> >             >       >       >               > > From:
fuego-bounces at lists.linuxfoundation.org <mailto:fuego-
> > bounces at lists.linuxfoundation.org>  <mailto:fuego-bounces at lists.
linuxfoundation.org <mailto:fuego-
> > bounces at lists.linuxfoundation.org> >
> >             > <mailto:fuego-bounces at lists.linuxfoundation.org <mailto:
fuego-bounces at lists.linuxfoundation.org>
> > <mailto:fuego-bounces at lists.linuxfoundation.org <mailto:
fuego-bounces at lists.linuxfoundation.org> > >
> >             >       > <mailto:fuego-bounces at lists.linuxfoundation.org
<mailto:fuego-bounces at lists.linuxfoundation.org>
> > <mailto:fuego-bounces at lists.linuxfoundation.org <mailto:
fuego-bounces at lists.linuxfoundation.org> >  <mailto:fuego-
> > <mailto:fuego->
> >             > bounces at lists.linuxfoundation.org <mailto:bounces at lists.
linuxfoundation.org>  <mailto:fuego-
> > bounces at lists.linuxfoundation.org <mailto:fuego-bounces at lists.
linuxfoundation.org> > > >
> >             >       >       > <mailto:fuego-bounces at lists.
linuxfoundation.org <mailto:fuego-bounces at lists.linuxfoundation.org>
> > <mailto:fuego-bounces at lists.linuxfoundation.org <mailto:
fuego-bounces at lists.linuxfoundation.org> >  <mailto:fuego-
> > <mailto:fuego->
> >             > bounces at lists.linuxfoundation.org <mailto:bounces at lists.
linuxfoundation.org>  <mailto:fuego-
> > bounces at lists.linuxfoundation.org <mailto:fuego-bounces at lists.
linuxfoundation.org> > >  <mailto:fuego- <mailto:fuego->
> > <mailto:fuego- <mailto:fuego-> >
> >
> >             >       > bounces at lists.linuxfoundation.org <mailto:
bounces at lists.linuxfoundation.org>
> > <mailto:bounces at lists.linuxfoundation.org <mailto:bounces at lists.
linuxfoundation.org> >  <mailto:fuego- <mailto:fuego->
> >
> >             > bounces at lists.linuxfoundation.org <mailto:bounces at lists.
linuxfoundation.org>  <mailto:fuego-
> > bounces at lists.linuxfoundation.org <mailto:fuego-bounces at lists.
linuxfoundation.org> > > > >  [mailto:fuego- <mailto:fuego->
> > <mailto:fuego- <mailto:fuego-> >
> >             > <mailto:fuego- <mailto:fuego->  <mailto:fuego- <mailto:
fuego-> > >
> >             >       >       > <mailto:fuego- <mailto:fuego->  <mailto:
fuego- <mailto:fuego-> >  <mailto:fuego- <mailto:fuego->
> > <mailto:fuego- <mailto:fuego-> > > >
> >             >       >       >               >
bounces at lists.linuxfoundation.org <mailto:bounces at lists.linuxfoundation.org>
> > <mailto:bounces at lists.linuxfoundation.org <mailto:bounces at lists.
linuxfoundation.org> >
> >             > <mailto:bounces at lists.linuxfoundation.org <mailto:
bounces at lists.linuxfoundation.org>
> > <mailto:bounces at lists.linuxfoundation.org <mailto:bounces at lists.
linuxfoundation.org> > >
> >             >
> >
> >             >       > <mailto:bounces at lists.linuxfoundation.org <mailto:
bounces at lists.linuxfoundation.org>
> > <mailto:bounces at lists.linuxfoundation.org <mailto:bounces at lists.
linuxfoundation.org> >
> >
> >             > <mailto:bounces at lists.linuxfoundation.org <mailto:
bounces at lists.linuxfoundation.org>
> > <mailto:bounces at lists.linuxfoundation.org <mailto:bounces at lists.
linuxfoundation.org> > > >  <mailto:fuego- <mailto:fuego->
> > <mailto:fuego- <mailto:fuego-> >
> >             > <mailto:fuego- <mailto:fuego->  <mailto:fuego- <mailto:
fuego-> > >
> >             >       >       > bounces at lists.linuxfoundation.org <mailto:
bounces at lists.linuxfoundation.org>
> > <mailto:bounces at lists.linuxfoundation.org <mailto:bounces at lists.
linuxfoundation.org> >
> >             > <mailto:bounces at lists.linuxfoundation.org <mailto:
bounces at lists.linuxfoundation.org>
> > <mailto:bounces at lists.linuxfoundation.org <mailto:bounces at lists.
linuxfoundation.org> > >  <mailto:fuego- <mailto:fuego->
> > <mailto:fuego- <mailto:fuego-> >
> >             >       > bounces at lists.linuxfoundation.org <mailto:
bounces at lists.linuxfoundation.org>
> > <mailto:bounces at lists.linuxfoundation.org <mailto:bounces at lists.
linuxfoundation.org> >  <mailto:fuego- <mailto:fuego->
> >             > bounces at lists.linuxfoundation.org <mailto:bounces at lists.
linuxfoundation.org>  <mailto:fuego-
> > bounces at lists.linuxfoundation.org <mailto:fuego-bounces at lists.
linuxfoundation.org> > > > > ] On Behalf Of Dhinakar
> >             >       >       >               > > Kalyanasundaram
> >             >       >       >               > > Sent: Wednesday, May
24, 2017 4:20 PM
> >             >       >       >               > > Benchmark.blobsallad
test build failing on my x86 64-bit ubuntu pc.
> >             >       >       >               > >
> >             >       >       >               > > Jenkins job console
error -> ->
> >             >       >       >               > >
> >             >       >       >               > > /tmp/hudson4393205057432627536.sh:
line 10: 19407 Killed timeout --signal=9 100m /bin/bash
> >             >       >       >               > >
$FUEGO_CORE/engine/tests/${TESTDIR}/${TESTNAME}.sh
> >             >       >       >               > > Build step 'Execute
shell' marked build as failure
> >             >       >       >               > >
> >             >       >       >               > >
> >             >       >       >               > >
> >             >       >       >               > > Can anyone please let
me know if they have executed this test and passed?
> >             >       >       >               >
> >             >       >       >               > I haven't tried this one
yet. From what I see at https://blobsallad.se/ it looks
> >             >       >       >               > like it probably has
dependencies for the SDK such as SDL and Cairo.
> >             >       >       >               > Do you have libsdl-dev
and libcairo-dev installed?
> >             >       >       >               > Since it's graphical you
will need a target with X (it's not going to work on docker)
> >             >       >       >               > Can you check the build
log and send the line that causes the failure?
> >             >       >       >               > "> Build step 'Execute
shell' marked build as failure" provides no information.
> >             >       >       >               >
> >             >       >       >               > By the way, could you
send your emails in clear text instead of html? Most of your mails
> >             >       >       >               > can't be seen on the
archive because of that:
> >             >       >       >               >
https://lists.linuxfoundation.org/pipermail/fuego/2017-May/000669.html
> > <https://lists.linuxfoundation.org/pipermail/fuego/2017-May/000669.html>
> >             > <https://lists.linuxfoundation.org/pipermail/
fuego/2017-May/000669.html
> > <https://lists.linuxfoundation.org/pipermail/fuego/2017-May/000669.html>
>
> >             >       > <https://lists.linuxfoundation.org/pipermail/
fuego/2017-May/000669.html
> > <https://lists.linuxfoundation.org/pipermail/fuego/2017-May/000669.html>
> >             > <https://lists.linuxfoundation.org/pipermail/
fuego/2017-May/000669.html
> > <https://lists.linuxfoundation.org/pipermail/fuego/2017-May/000669.html>
> >
> >             >       >       > <https://lists.
linuxfoundation.org/pipermail/fuego/2017-May/000669.html
> > <https://lists.linuxfoundation.org/pipermail/fuego/2017-May/000669.html>
> >             > <https://lists.linuxfoundation.org/pipermail/
fuego/2017-May/000669.html
> > <https://lists.linuxfoundation.org/pipermail/fuego/2017-May/000669.html>
>
> >             >       > <https://lists.linuxfoundation.org/pipermail/
fuego/2017-May/000669.html
> > <https://lists.linuxfoundation.org/pipermail/fuego/2017-May/000669.html>
> >             > <https://lists.linuxfoundation.org/pipermail/
fuego/2017-May/000669.html
> > <https://lists.linuxfoundation.org/pipermail/fuego/2017-May/000669.html>
> > >
> >             >       >       > <https://lists.
linuxfoundation.org/pipermail/fuego/2017-
> > <https://lists.linuxfoundation.org/pipermail/fuego/2017->  <
https://lists.linuxfoundation.org/pipermail/fuego/2017-
> > <https://lists.linuxfoundation.org/pipermail/fuego/2017-> >
> >             > <https://lists.linuxfoundation.org/pipermail/fuego/2017- <
https://lists.linuxfoundation.org/pipermail/fuego/2017->
> > <https://lists.linuxfoundation.org/pipermail/fuego/2017- <https://lists.
linuxfoundation.org/pipermail/fuego/2017-> > >
> >             >       > <https://lists.linuxfoundation.org/pipermail/
fuego/2017-
> > <https://lists.linuxfoundation.org/pipermail/fuego/2017->  <
https://lists.linuxfoundation.org/pipermail/fuego/2017-
> > <https://lists.linuxfoundation.org/pipermail/fuego/2017-> >
> >             > <https://lists.linuxfoundation.org/pipermail/fuego/2017- <
https://lists.linuxfoundation.org/pipermail/fuego/2017->
> > <https://lists.linuxfoundation.org/pipermail/fuego/2017- <https://lists.
linuxfoundation.org/pipermail/fuego/2017-> > > >
> >             >       >       >               > May/000669.html>
> >             >       >       >               >
> >             >       >       >               > Thanks
> >             >       >       >               > Daniel
> >             >       >       >
> >             >       >       >
> >             >       >       >
> >             >       >       >
> >             >       >       >
> >             >       >
> >             >       >
> >             >       >
> >             >       >
> >             >
> >             >
> >             >
> >             >
> >             >
> >
> >
> >
> >
> >
>
>
>
> _______________________________________________
> Fuego mailing list
> Fuego at lists.linuxfoundation.org
> https://lists.linuxfoundation.org/mailman/listinfo/fuego
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.linuxfoundation.org/pipermail/fuego/attachments/20170628/8fe427f1/attachment-0001.html>


More information about the Fuego mailing list