[Fuego] [PATCH] Add test cases of command logwatch.

Wang Mingyu wangmy at cn.fujitsu.com
Tue Nov 6 13:56:21 UTC 2018


The command logwatch is a system log analyzer and reporter.

This test set is used to report the system log and mail it to email address.

Signed-off-by: Wang Mingyu <wangmy at cn.fujitsu.com>
---
 .../tests/Functional.logwatch/data/logwatch.conf   | 107 ++++
 engine/tests/Functional.logwatch/data/main.cf      | 651 +++++++++++++++++++++
 engine/tests/Functional.logwatch/fuego_test.sh     |  19 +
 engine/tests/Functional.logwatch/logwatch_test.sh  |   4 +
 engine/tests/Functional.logwatch/parser.py         |  22 +
 engine/tests/Functional.logwatch/spec.json         |   7 +
 .../Functional.logwatch/tests/logwatch_detail.sh   |  38 ++
 .../Functional.logwatch/tests/logwatch_help.sh     |  13 +
 .../Functional.logwatch/tests/logwatch_mailto.sh   |  43 ++
 9 files changed, 904 insertions(+)
 create mode 100644 engine/tests/Functional.logwatch/data/logwatch.conf
 create mode 100644 engine/tests/Functional.logwatch/data/main.cf
 create mode 100644 engine/tests/Functional.logwatch/fuego_test.sh
 create mode 100755 engine/tests/Functional.logwatch/logwatch_test.sh
 create mode 100644 engine/tests/Functional.logwatch/parser.py
 create mode 100644 engine/tests/Functional.logwatch/spec.json
 create mode 100644 engine/tests/Functional.logwatch/tests/logwatch_detail.sh
 create mode 100644 engine/tests/Functional.logwatch/tests/logwatch_help.sh
 create mode 100644 engine/tests/Functional.logwatch/tests/logwatch_mailto.sh

diff --git a/engine/tests/Functional.logwatch/data/logwatch.conf b/engine/tests/Functional.logwatch/data/logwatch.conf
new file mode 100644
index 0000000..6621145
--- /dev/null
+++ b/engine/tests/Functional.logwatch/data/logwatch.conf
@@ -0,0 +1,107 @@
+########################################################
+# This was written and is maintained by:
+#    Kirk Bauer <kirk at kaybee.org>
+#
+# Please send all comments, suggestions, bug reports,
+#    etc, to kirk at kaybee.org.
+#
+########################################################
+
+# NOTE:
+#   All these options are the defaults if you run logwatch with no
+#   command-line arguments.  You can override all of these on the
+#   command-line. 
+
+# You can put comments anywhere you want to.  They are effective for the
+# rest of the line.
+
+# this is in the format of <name> = <value>.  Whitespace at the beginning
+# and end of the lines is removed.  Whitespace before and after the = sign
+# is removed.  Everything is case *insensitive*.
+
+# Yes = True  = On  = 1
+# No  = False = Off = 0
+
+# Default Log Directory
+# All log-files are assumed to be given relative to this directory.
+LogDir = /var/log
+
+# You can override the default temp directory (/tmp) here
+TmpDir = /var/cache/logwatch
+
+# Default person to mail reports to.  Can be a local account or a
+# complete email address.
+MailTo = root
+
+# If set to 'Yes', the report will be sent to stdout instead of being
+# mailed to above person.
+Print = No
+
+# if set, the results will be saved in <filename> instead of mailed
+# or displayed.
+#Save = /tmp/logwatch
+
+# Use archives?  If set to 'Yes', the archives of logfiles
+# (i.e. /var/log/messages.1 or /var/log/messages.1.gz) will
+# be searched in addition to the /var/log/messages file.
+# This usually will not do much if your range is set to just
+# 'Yesterday' or 'Today'... it is probably best used with
+Archives = Yes
+Range = All
+
+# The default time range for the report...
+# The current choices are All, Today, Yesterday
+#Range = yesterday
+
+# The default detail level for the report.
+# This can either be Low, Med, High or a number.
+# Low = 0
+# Med = 5
+# High = 10
+Detail = Low 
+
+
+# The 'Service' option expects either the name of a filter
+# (in /usr/share/logwatch/scripts/services/*) or 'All'.
+# The default service(s) to report on.  This should be left as All for
+# most people.  
+Service = All
+# You can also disable certain services (when specifying all)
+Service = "-zz-network"     # Prevents execution of zz-network service, which
+                            # prints useful network configuration info.
+# If you only cared about FTP messages, you could use these 2 lines
+# instead of the above:
+#Service = ftpd-messages   # Processes ftpd messages in /var/log/messages
+#Service = ftpd-xferlog    # Processes ftpd messages in /var/log/xferlog
+# Maybe you only wanted reports on PAM messages, then you would use:
+#Service = pam_pwdb        # PAM_pwdb messages - usually quite a bit
+#Service = pam             # General PAM messages... usually not many
+
+# You can also choose to use the 'LogFile' option.  This will cause
+# logwatch to only analyze that one logfile.. for example:
+#LogFile = messages
+# will process /var/log/messages.  This will run all the filters that 
+# process that logfile.  This option is probably not too useful to
+# most people.  Setting 'Service' to 'All' above analyizes all LogFiles
+# anyways...
+
+#
+# some systems have different locations for mailers
+#
+#mailer = /bin/mail
+mailer = "sendmail -t"
+
+#
+# With this option set to 'Yes', only log entries for this particular host
+# (as returned by 'hostname' command) will be processed.  The hostname
+# can also be overridden on the commandline (with --hostname option).  This
+# can allow a log host to process only its own logs, or Logwatch can be
+# run once per host included in the logfiles. 
+#
+# The default is to report on all log entries, regardless of its source host.
+# Note that some logfiles do not include host information and will not be
+# influenced by this setting.
+#
+#HostLimit = Yes
+
+# vi: shiftwidth=3 tabstop=3 et
diff --git a/engine/tests/Functional.logwatch/data/main.cf b/engine/tests/Functional.logwatch/data/main.cf
new file mode 100644
index 0000000..f76e470
--- /dev/null
+++ b/engine/tests/Functional.logwatch/data/main.cf
@@ -0,0 +1,651 @@
+# Global Postfix configuration file. This file lists only a subset
+# of all 300+ parameters. See the postconf(5) manual page for a
+# complete list.
+#
+# The general format of each line is: parameter = value. Lines
+# that begin with whitespace continue the previous line. A value can
+# contain references to other $names or ${name}s.
+#
+# NOTE - CHANGE NO MORE THAN 2-3 PARAMETERS AT A TIME, AND TEST IF
+# POSTFIX STILL WORKS AFTER EVERY CHANGE.
+
+# SOFT BOUNCE
+#
+# The soft_bounce parameter provides a limited safety net for
+# testing.  When soft_bounce is enabled, mail will remain queued that
+# would otherwise bounce. This parameter disables locally-generated
+# bounces, and prevents the SMTP server from rejecting mail permanently
+# (by changing 5xx replies into 4xx replies). However, soft_bounce
+# is no cure for address rewriting mistakes or mail routing mistakes.
+#
+#soft_bounce = no
+
+# LOCAL PATHNAME INFORMATION
+#
+# The queue_directory specifies the location of the Postfix queue.
+# This is also the root directory of Postfix daemons that run chrooted.
+# See the files in examples/chroot-setup for setting up Postfix chroot
+# environments on different UNIX systems.
+#
+queue_directory = /var/spool/postfix
+
+# The command_directory parameter specifies the location of all
+# postXXX commands.
+#
+command_directory = /usr/sbin
+
+# The daemon_directory parameter specifies the location of all Postfix
+# daemon programs (i.e. programs listed in the master.cf file). This
+# directory must be owned by root.
+#
+daemon_directory = /usr/libexec/postfix
+
+#data_directory = /var/lib/postfix
+# QUEUE AND PROCESS OWNERSHIP
+#
+# The mail_owner parameter specifies the owner of the Postfix queue
+# and of most Postfix daemon processes.  Specify the name of a user
+# account THAT DOES NOT SHARE ITS USER OR GROUP ID WITH OTHER ACCOUNTS
+# AND THAT OWNS NO OTHER FILES OR PROCESSES ON THE SYSTEM.  In
+# particular, don't specify nobody or daemon. PLEASE USE A DEDICATED
+# USER.
+#
+mail_owner = postfix
+
+# The default_privs parameter specifies the default rights used by
+# the local delivery agent for delivery to external file or command.
+# These rights are used in the absence of a recipient user context.
+# DO NOT SPECIFY A PRIVILEGED USER OR THE POSTFIX OWNER.
+#
+#default_privs = nobody
+
+# INTERNET HOST AND DOMAIN NAMES
+# 
+# The myhostname parameter specifies the internet hostname of this
+# mail system. The default is to use the fully-qualified domain name
+# from gethostname(). $myhostname is used as a default value for many
+# other configuration parameters.
+#
+#myhostname = host.domain.tld
+#myhostname = virtual.domain.tld
+myhostname = localhost.localdomain 
+#myhostname = localhost 
+
+# The mydomain parameter specifies the local internet domain name.
+# The default is to use $myhostname minus the first component.
+# $mydomain is used as a default value for many other configuration
+# parameters.
+#
+#mydomain = domain.tld
+mydomain = localdomain 
+
+# SENDING MAIL
+# 
+# The myorigin parameter specifies the domain that locally-posted
+# mail appears to come from. The default is to append $myhostname,
+# which is fine for small sites.  If you run a domain with multiple
+# machines, you should (1) change this to $mydomain and (2) set up
+# a domain-wide alias database that aliases each user to
+# user at that.users.mailhost.
+#
+# For the sake of consistency between sender and recipient addresses,
+# myorigin also specifies the default domain name that is appended
+# to recipient addresses that have no @domain part.
+#
+#myorigin = $myhostname
+#myorigin = $mydomain
+myorigin = $myhostname
+
+# RECEIVING MAIL
+
+# The inet_interfaces parameter specifies the network interface
+# addresses that this mail system receives mail on.  By default,
+# the software claims all active interfaces on the machine. The
+# parameter also controls delivery of mail to user@[ip.address].
+#
+# See also the proxy_interfaces parameter, for network addresses that
+# are forwarded to us via a proxy or network address translator.
+#
+# Note: you need to stop/start Postfix when this parameter changes.
+#
+inet_interfaces = all
+#inet_interfaces = $myhostname
+#inet_interfaces = $myhostname, localhost
+#inet_interfaces = localhost
+
+# The proxy_interfaces parameter specifies the network interface
+# addresses that this mail system receives mail on by way of a
+# proxy or network address translation unit. This setting extends
+# the address list specified with the inet_interfaces parameter.
+#
+# You must specify your proxy/NAT addresses when your system is a
+# backup MX host for other domains, otherwise mail delivery loops
+# will happen when the primary MX host is down.
+#
+#proxy_interfaces =
+#proxy_interfaces = 1.2.3.4
+
+# The mydestination parameter specifies the list of domains that this
+# machine considers itself the final destination for.
+#
+# These domains are routed to the delivery agent specified with the
+# local_transport parameter setting. By default, that is the UNIX
+# compatible delivery agent that lookups all recipients in /etc/passwd
+# and /etc/aliases or their equivalent.
+#
+# The default is $myhostname + localhost.$mydomain.  On a mail domain
+# gateway, you should also include $mydomain.
+#
+# Do not specify the names of virtual domains - those domains are
+# specified elsewhere (see VIRTUAL_README).
+#
+# Do not specify the names of domains that this machine is backup MX
+# host for. Specify those names via the relay_domains settings for
+# the SMTP server, or use permit_mx_backup if you are lazy (see
+# STANDARD_CONFIGURATION_README).
+#
+# The local machine is always the final destination for mail addressed
+# to user@[the.net.work.address] of an interface that the mail system
+# receives mail on (see the inet_interfaces parameter).
+#
+# Specify a list of host or domain names, /file/name or type:table
+# patterns, separated by commas and/or whitespace. A /file/name
+# pattern is replaced by its contents; a type:table is matched when
+# a name matches a lookup key (the right-hand side is ignored).
+# Continue long lines by starting the next line with whitespace.
+#
+# See also below, section "REJECTING MAIL FOR UNKNOWN LOCAL USERS".
+#
+mydestination = $myhostname, localhost.$mydomain, localhost
+#mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain
+#mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain,
+#	mail.$mydomain, www.$mydomain, ftp.$mydomain
+
+# REJECTING MAIL FOR UNKNOWN LOCAL USERS
+#
+# The local_recipient_maps parameter specifies optional lookup tables
+# with all names or addresses of users that are local with respect
+# to $mydestination, $inet_interfaces or $proxy_interfaces.
+#
+# If this parameter is defined, then the SMTP server will reject
+# mail for unknown local users. This parameter is defined by default.
+#
+# To turn off local recipient checking in the SMTP server, specify
+# local_recipient_maps = (i.e. empty).
+#
+# The default setting assumes that you use the default Postfix local
+# delivery agent for local delivery. You need to update the
+# local_recipient_maps setting if:
+#
+# - You define $mydestination domain recipients in files other than
+#   /etc/passwd, /etc/aliases, or the $virtual_alias_maps files.
+#   For example, you define $mydestination domain recipients in    
+#   the $virtual_mailbox_maps files.
+#
+# - You redefine the local delivery agent in master.cf.
+#
+# - You redefine the "local_transport" setting in main.cf.
+#
+# - You use the "luser_relay", "mailbox_transport", or "fallback_transport"
+#   feature of the Postfix local delivery agent (see local(8)).
+#
+# Details are described in the LOCAL_RECIPIENT_README file.
+#
+# Beware: if the Postfix SMTP server runs chrooted, you probably have
+# to access the passwd file via the proxymap service, in order to
+# overcome chroot restrictions. The alternative, having a copy of
+# the system passwd file in the chroot jail is just not practical.
+#
+# The right-hand side of the lookup tables is conveniently ignored.
+# In the left-hand side, specify a bare username, an @domain.tld
+# wild-card, or specify a user at domain.tld address.
+# 
+#local_recipient_maps = unix:passwd.byname $alias_maps
+#local_recipient_maps = proxy:unix:passwd.byname $alias_maps
+#local_recipient_maps =
+
+# The unknown_local_recipient_reject_code specifies the SMTP server
+# response code when a recipient domain matches $mydestination or
+# ${proxy,inet}_interfaces, while $local_recipient_maps is non-empty
+# and the recipient address or address local-part is not found.
+#
+# The default setting is 550 (reject mail) but it is safer to start
+# with 450 (try again later) until you are certain that your
+# local_recipient_maps settings are OK.
+#
+unknown_local_recipient_reject_code = 550
+
+# TRUST AND RELAY CONTROL
+
+# The mynetworks parameter specifies the list of "trusted" SMTP
+# clients that have more privileges than "strangers".
+#
+# In particular, "trusted" SMTP clients are allowed to relay mail
+# through Postfix.  See the smtpd_recipient_restrictions parameter
+# in postconf(5).
+#
+# You can specify the list of "trusted" network addresses by hand
+# or you can let Postfix do it for you (which is the default).
+#
+# By default (mynetworks_style = subnet), Postfix "trusts" SMTP
+# clients in the same IP subnetworks as the local machine.
+# On Linux, this does works correctly only with interfaces specified
+# with the "ifconfig" command.
+# 
+# Specify "mynetworks_style = class" when Postfix should "trust" SMTP
+# clients in the same IP class A/B/C networks as the local machine.
+# Don't do this with a dialup site - it would cause Postfix to "trust"
+# your entire provider's network.  Instead, specify an explicit
+# mynetworks list by hand, as described below.
+#  
+# Specify "mynetworks_style = host" when Postfix should "trust"
+# only the local machine.
+# 
+#mynetworks_style = class
+mynetworks_style = subnet
+#mynetworks_style = host
+
+# Alternatively, you can specify the mynetworks list by hand, in
+# which case Postfix ignores the mynetworks_style setting.
+#
+# Specify an explicit list of network/netmask patterns, where the
+# mask specifies the number of bits in the network part of a host
+# address.
+#
+# You can also specify the absolute pathname of a pattern file instead
+# of listing the patterns here. Specify type:table for table-based lookups
+# (the value on the table right-hand side is not used).
+#
+#mynetworks = 168.100.189.0/28, 127.0.0.0/8
+#mynetworks = $config_directory/mynetworks
+#mynetworks = hash:/etc/postfix/network_table
+mynetworks = 192.168.255.0/24, 127.0.0.0/8
+
+# The relay_domains parameter restricts what destinations this system will
+# relay mail to.  See the smtpd_recipient_restrictions description in
+# postconf(5) for detailed information.
+#
+# By default, Postfix relays mail
+# - from "trusted" clients (IP address matches $mynetworks) to any destination,
+# - from "untrusted" clients to destinations that match $relay_domains or
+#   subdomains thereof, except addresses with sender-specified routing.
+# The default relay_domains value is $mydestination.
+# 
+# In addition to the above, the Postfix SMTP server by default accepts mail
+# that Postfix is final destination for:
+# - destinations that match $inet_interfaces or $proxy_interfaces,
+# - destinations that match $mydestination
+# - destinations that match $virtual_alias_domains,
+# - destinations that match $virtual_mailbox_domains.
+# These destinations do not need to be listed in $relay_domains.
+# 
+# Specify a list of hosts or domains, /file/name patterns or type:name
+# lookup tables, separated by commas and/or whitespace.  Continue
+# long lines by starting the next line with whitespace. A file name
+# is replaced by its contents; a type:name table is matched when a
+# (parent) domain appears as lookup key.
+#
+# NOTE: Postfix will not automatically forward mail for domains that
+# list this system as their primary or backup MX host. See the
+# permit_mx_backup restriction description in postconf(5).
+#
+#relay_domains = $mydestination
+
+# INTERNET OR INTRANET
+
+# The relayhost parameter specifies the default host to send mail to
+# when no entry is matched in the optional transport(5) table. When
+# no relayhost is given, mail is routed directly to the destination.
+#
+# On an intranet, specify the organizational domain name. If your
+# internal DNS uses no MX records, specify the name of the intranet
+# gateway host instead.
+#
+# In the case of SMTP, specify a domain, host, host:port, [host]:port,
+# [address] or [address]:port; the form [host] turns off MX lookups.
+#
+# If you're connected via UUCP, see also the default_transport parameter.
+#
+#relayhost = $mydomain
+#relayhost = [gateway.my.domain]
+#relayhost = [mailserver.isp.tld]
+#relayhost = uucphost
+#relayhost = [an.ip.add.ress]
+
+# REJECTING UNKNOWN RELAY USERS
+#
+# The relay_recipient_maps parameter specifies optional lookup tables
+# with all addresses in the domains that match $relay_domains.
+#
+# If this parameter is defined, then the SMTP server will reject
+# mail for unknown relay users. This feature is off by default.
+#
+# The right-hand side of the lookup tables is conveniently ignored.
+# In the left-hand side, specify an @domain.tld wild-card, or specify
+# a user at domain.tld address.
+# 
+#relay_recipient_maps = hash:/etc/postfix/relay_recipients
+
+# INPUT RATE CONTROL
+#
+# The in_flow_delay configuration parameter implements mail input
+# flow control. This feature is turned on by default, although it
+# still needs further development (it's disabled on SCO UNIX due
+# to an SCO bug).
+# 
+# A Postfix process will pause for $in_flow_delay seconds before
+# accepting a new message, when the message arrival rate exceeds the
+# message delivery rate. With the default 100 SMTP server process
+# limit, this limits the mail inflow to 100 messages a second more
+# than the number of messages delivered per second.
+# 
+# Specify 0 to disable the feature. Valid delays are 0..10.
+# 
+#in_flow_delay = 1s
+
+# ADDRESS REWRITING
+#
+# The ADDRESS_REWRITING_README document gives information about
+# address masquerading or other forms of address rewriting including
+# username->Firstname.Lastname mapping.
+
+# ADDRESS REDIRECTION (VIRTUAL DOMAIN)
+#
+# The VIRTUAL_README document gives information about the many forms
+# of domain hosting that Postfix supports.
+
+# "USER HAS MOVED" BOUNCE MESSAGES
+#
+# See the discussion in the ADDRESS_REWRITING_README document.
+
+# TRANSPORT MAP
+#
+# See the discussion in the ADDRESS_REWRITING_README document.
+
+# ALIAS DATABASE
+#
+# The alias_maps parameter specifies the list of alias databases used
+# by the local delivery agent. The default list is system dependent.
+#
+# On systems with NIS, the default is to search the local alias
+# database, then the NIS alias database. See aliases(5) for syntax
+# details.
+# 
+# If you change the alias database, run "postalias /etc/aliases" (or
+# wherever your system stores the mail alias file), or simply run
+# "newaliases" to build the necessary DBM or DB file.
+#
+# It will take a minute or so before changes become visible.  Use
+# "postfix reload" to eliminate the delay.
+#
+#alias_maps = dbm:/etc/aliases
+alias_maps = hash:/etc/aliases
+#alias_maps = hash:/etc/aliases, nis:mail.aliases
+#alias_maps = netinfo:/aliases
+
+# The alias_database parameter specifies the alias database(s) that
+# are built with "newaliases" or "sendmail -bi".  This is a separate
+# configuration parameter, because alias_maps (see above) may specify
+# tables that are not necessarily all under control by Postfix.
+#
+#alias_database = dbm:/etc/aliases
+#alias_database = dbm:/etc/mail/aliases
+alias_database = hash:/etc/aliases
+#alias_database = hash:/etc/aliases, hash:/opt/majordomo/aliases
+
+# ADDRESS EXTENSIONS (e.g., user+foo)
+#
+# The recipient_delimiter parameter specifies the separator between
+# user names and address extensions (user+foo). See canonical(5),
+# local(8), relocated(5) and virtual(5) for the effects this has on
+# aliases, canonical, virtual, relocated and .forward file lookups.
+# Basically, the software tries user+foo and .forward+foo before
+# trying user and .forward.
+#
+#recipient_delimiter = +
+
+# DELIVERY TO MAILBOX
+#
+# The home_mailbox parameter specifies the optional pathname of a
+# mailbox file relative to a user's home directory. The default
+# mailbox file is /var/spool/mail/user or /var/mail/user.  Specify
+# "Maildir/" for qmail-style delivery (the / is required).
+#
+#home_mailbox = Mailbox
+#home_mailbox = Maildir/
+ 
+# The mail_spool_directory parameter specifies the directory where
+# UNIX-style mailboxes are kept. The default setting depends on the
+# system type.
+#
+#mail_spool_directory = /var/mail
+mail_spool_directory = /var/spool/mail
+
+# The mailbox_command parameter specifies the optional external
+# command to use instead of mailbox delivery. The command is run as
+# the recipient with proper HOME, SHELL and LOGNAME environment settings.
+# Exception:  delivery for root is done as $default_user.
+#
+# Other environment variables of interest: USER (recipient username),
+# EXTENSION (address extension), DOMAIN (domain part of address),
+# and LOCAL (the address localpart).
+#
+# Unlike other Postfix configuration parameters, the mailbox_command
+# parameter is not subjected to $parameter substitutions. This is to
+# make it easier to specify shell syntax (see example below).
+#
+# Avoid shell meta characters because they will force Postfix to run
+# an expensive shell process. Procmail alone is expensive enough.
+#
+# IF YOU USE THIS TO DELIVER MAIL SYSTEM-WIDE, YOU MUST SET UP AN
+# ALIAS THAT FORWARDS MAIL FOR ROOT TO A REAL USER.
+#
+#mailbox_command = /some/where/procmail
+#mailbox_command = /some/where/procmail -a "$EXTENSION"
+
+# The mailbox_transport specifies the optional transport in master.cf
+# to use after processing aliases and .forward files. This parameter
+# has precedence over the mailbox_command, fallback_transport and
+# luser_relay parameters.
+#
+# Specify a string of the form transport:nexthop, where transport is
+# the name of a mail delivery transport defined in master.cf.  The
+# :nexthop part is optional. For more details see the sample transport
+# configuration file.
+#
+# NOTE: if you use this feature for accounts not in the UNIX password
+# file, then you must update the "local_recipient_maps" setting in
+# the main.cf file, otherwise the SMTP server will reject mail for    
+# non-UNIX accounts with "User unknown in local recipient table".
+#
+#mailbox_transport = lmtp:unix:/file/name
+#mailbox_transport = cyrus
+
+# The fallback_transport specifies the optional transport in master.cf
+# to use for recipients that are not found in the UNIX passwd database.
+# This parameter has precedence over the luser_relay parameter.
+#
+# Specify a string of the form transport:nexthop, where transport is
+# the name of a mail delivery transport defined in master.cf.  The
+# :nexthop part is optional. For more details see the sample transport
+# configuration file.
+#
+# NOTE: if you use this feature for accounts not in the UNIX password
+# file, then you must update the "local_recipient_maps" setting in
+# the main.cf file, otherwise the SMTP server will reject mail for    
+# non-UNIX accounts with "User unknown in local recipient table".
+#
+#fallback_transport = lmtp:unix:/file/name
+#fallback_transport = cyrus
+#fallback_transport =
+
+# The luser_relay parameter specifies an optional destination address
+# for unknown recipients.  By default, mail for unknown@$mydestination,
+# unknown@[$inet_interfaces] or unknown@[$proxy_interfaces] is returned
+# as undeliverable.
+#
+# The following expansions are done on luser_relay: $user (recipient
+# username), $shell (recipient shell), $home (recipient home directory),
+# $recipient (full recipient address), $extension (recipient address
+# extension), $domain (recipient domain), $local (entire recipient
+# localpart), $recipient_delimiter. Specify ${name?value} or
+# ${name:value} to expand value only when $name does (does not) exist.
+#
+# luser_relay works only for the default Postfix local delivery agent.
+#
+# NOTE: if you use this feature for accounts not in the UNIX password
+# file, then you must specify "local_recipient_maps =" (i.e. empty) in
+# the main.cf file, otherwise the SMTP server will reject mail for    
+# non-UNIX accounts with "User unknown in local recipient table".
+#
+#luser_relay = $user at other.host
+#luser_relay = $local at other.host
+#luser_relay = admin+$local
+  
+# JUNK MAIL CONTROLS
+# 
+# The controls listed here are only a very small subset. The file
+# SMTPD_ACCESS_README provides an overview.
+
+# The header_checks parameter specifies an optional table with patterns
+# that each logical message header is matched against, including
+# headers that span multiple physical lines.
+#
+# By default, these patterns also apply to MIME headers and to the
+# headers of attached messages. With older Postfix versions, MIME and
+# attached message headers were treated as body text.
+#
+# For details, see "man header_checks".
+#
+#header_checks = regexp:/etc/postfix/header_checks
+
+# FAST ETRN SERVICE
+#
+# Postfix maintains per-destination logfiles with information about
+# deferred mail, so that mail can be flushed quickly with the SMTP
+# "ETRN domain.tld" command, or by executing "sendmail -qRdomain.tld".
+# See the ETRN_README document for a detailed description.
+# 
+# The fast_flush_domains parameter controls what destinations are
+# eligible for this service. By default, they are all domains that
+# this server is willing to relay mail to.
+# 
+#fast_flush_domains = $relay_domains
+
+# SHOW SOFTWARE VERSION OR NOT
+#
+# The smtpd_banner parameter specifies the text that follows the 220
+# code in the SMTP server's greeting banner. Some people like to see
+# the mail version advertised. By default, Postfix shows no version.
+#
+# You MUST specify $myhostname at the start of the text. That is an
+# RFC requirement. Postfix itself does not care.
+#
+#smtpd_banner = $myhostname ESMTP $mail_name
+#smtpd_banner = $myhostname ESMTP $mail_name ($mail_version)
+
+# PARALLEL DELIVERY TO THE SAME DESTINATION
+#
+# How many parallel deliveries to the same user or domain? With local
+# delivery, it does not make sense to do massively parallel delivery
+# to the same user, because mailbox updates must happen sequentially,
+# and expensive pipelines in .forward files can cause disasters when
+# too many are run at the same time. With SMTP deliveries, 10
+# simultaneous connections to the same domain could be sufficient to
+# raise eyebrows.
+# 
+# Each message delivery transport has its XXX_destination_concurrency_limit
+# parameter.  The default is $default_destination_concurrency_limit for
+# most delivery transports. For the local delivery agent the default is 2.
+
+#local_destination_concurrency_limit = 2
+#default_destination_concurrency_limit = 20
+
+# DEBUGGING CONTROL
+#
+# The debug_peer_level parameter specifies the increment in verbose
+# logging level when an SMTP client or server host name or address
+# matches a pattern in the debug_peer_list parameter.
+#
+debug_peer_level = 2
+
+# The debug_peer_list parameter specifies an optional list of domain
+# or network patterns, /file/name patterns or type:name tables. When
+# an SMTP client or server host name or address matches a pattern,
+# increase the verbose logging level by the amount specified in the
+# debug_peer_level parameter.
+#
+#debug_peer_list = 127.0.0.1
+#debug_peer_list = some.domain
+
+# The debugger_command specifies the external command that is executed
+# when a Postfix daemon program is run with the -D option.
+#
+# Use "command .. & sleep 5" so that the debugger can attach before
+# the process marches on. If you use an X-based debugger, be sure to
+# set up your XAUTHORITY environment variable before starting Postfix.
+#
+debugger_command =
+	 PATH=/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin
+	 xxgdb $daemon_directory/$process_name $process_id & sleep 5
+
+# If you can't use X, use this to capture the call stack when a
+# daemon crashes. The result is in a file in the configuration
+# directory, and is named after the process name and the process ID.
+#
+# debugger_command =
+#	PATH=/bin:/usr/bin:/usr/local/bin; export PATH; (echo cont;
+#	echo where) | gdb $daemon_directory/$process_name $process_id 2>&1
+#	>$config_directory/$process_name.$process_id.log & sleep 5
+#
+# Another possibility is to run gdb under a detached screen session.
+# To attach to the screen sesssion, su root and run "screen -r
+# <id_string>" where <id_string> uniquely matches one of the detached
+# sessions (from "screen -list").
+#
+# debugger_command =
+#	PATH=/bin:/usr/bin:/sbin:/usr/sbin; export PATH; screen
+#	-dmS $process_name gdb $daemon_directory/$process_name
+#	$process_id & sleep 1
+
+# INSTALL-TIME CONFIGURATION INFORMATION
+#
+# The following parameters are used when installing a new Postfix version.
+# 
+# sendmail_path: The full pathname of the Postfix sendmail command.
+# This is the Sendmail-compatible mail posting interface.
+# 
+sendmail_path = /usr/sbin/sendmail.postfix
+
+# newaliases_path: The full pathname of the Postfix newaliases command.
+# This is the Sendmail-compatible command to build alias databases.
+#
+newaliases_path = /usr/bin/newaliases.postfix
+
+# mailq_path: The full pathname of the Postfix mailq command.  This
+# is the Sendmail-compatible mail queue listing command.
+# 
+mailq_path = /usr/bin/mailq.postfix
+
+# setgid_group: The group for mail submission and queue management
+# commands.  This must be a group name with a numerical group ID that
+# is not shared with other accounts, not even with the Postfix account.
+#
+setgid_group = postdrop
+
+# html_directory: The location of the Postfix HTML documentation.
+#
+html_directory = no
+
+# manpage_directory: The location of the Postfix on-line manual pages.
+#
+manpage_directory = /usr/share/man
+
+# sample_directory: The location of the Postfix sample configuration files.
+# This parameter is obsolete as of Postfix 2.1.
+#
+sample_directory = /usr/share/doc/postfixi/samples
+
+# readme_directory: The location of the Postfix README files.
+#
+readme_directory = /usr/share/doc/postfix/README_FILES
diff --git a/engine/tests/Functional.logwatch/fuego_test.sh b/engine/tests/Functional.logwatch/fuego_test.sh
new file mode 100644
index 0000000..d3db69f
--- /dev/null
+++ b/engine/tests/Functional.logwatch/fuego_test.sh
@@ -0,0 +1,19 @@
+function test_pre_check {
+    assert_has_program logwatch
+}
+
+function test_deploy {
+    put $TEST_HOME/logwatch_test.sh $BOARD_TESTDIR/fuego.$TESTDIR/
+    put $FUEGO_CORE/engine/scripts/fuego_board_function_lib.sh $BOARD_TESTDIR/fuego.$TESTDIR
+    put -r $TEST_HOME/tests $BOARD_TESTDIR/fuego.$TESTDIR/
+    put -r $TEST_HOME/data $BOARD_TESTDIR/fuego.$TESTDIR/
+}
+
+function test_run {
+    report "cd $BOARD_TESTDIR/fuego.$TESTDIR;\
+    ./logwatch_test.sh"
+}
+
+function test_processing {
+    log_compare "$TESTDIR" "0" "TEST-FAIL" "n"
+}
diff --git a/engine/tests/Functional.logwatch/logwatch_test.sh b/engine/tests/Functional.logwatch/logwatch_test.sh
new file mode 100755
index 0000000..dd5ce37
--- /dev/null
+++ b/engine/tests/Functional.logwatch/logwatch_test.sh
@@ -0,0 +1,4 @@
+#!/bin/sh
+for i in tests/*.sh; do
+    sh $i
+done
diff --git a/engine/tests/Functional.logwatch/parser.py b/engine/tests/Functional.logwatch/parser.py
new file mode 100644
index 0000000..d85abd7
--- /dev/null
+++ b/engine/tests/Functional.logwatch/parser.py
@@ -0,0 +1,22 @@
+#!/usr/bin/python
+# See common.py for description of command-line arguments
+
+import os, sys, collections
+
+sys.path.insert(0, os.environ['FUEGO_CORE'] + '/engine/scripts/parser')
+import common as plib
+
+measurements = {}
+measurements = collections.OrderedDict()
+
+regex_string = '^ -> (.*): TEST-(.*)$'
+matches = plib.parse_log(regex_string)
+
+if matches:
+    for m in matches:
+        measurements['default.' + m[0]] = 'PASS' if m[1] == 'PASS' else 'FAIL'
+
+# split the output for each testcase
+plib.split_output_per_testcase(regex_string, measurements)
+
+sys.exit(plib.process(measurements))
diff --git a/engine/tests/Functional.logwatch/spec.json b/engine/tests/Functional.logwatch/spec.json
new file mode 100644
index 0000000..1a74497
--- /dev/null
+++ b/engine/tests/Functional.logwatch/spec.json
@@ -0,0 +1,7 @@
+{
+    "testName": "Functional.logwatch",
+    "specs": {
+        "default": {}
+    }
+}
+
diff --git a/engine/tests/Functional.logwatch/tests/logwatch_detail.sh b/engine/tests/Functional.logwatch/tests/logwatch_detail.sh
new file mode 100644
index 0000000..7ab3f8b
--- /dev/null
+++ b/engine/tests/Functional.logwatch/tests/logwatch_detail.sh
@@ -0,0 +1,38 @@
+#!/bin/sh
+
+#  Run logwatch and print the log to standard output.
+#  option: --detail
+
+test="detail"
+
+. ./fuego_board_function_lib.sh
+
+set_init_manager
+logger_service=$(detect_logger_service)
+
+if [ -e /var/run/syslog-ng.pid ]
+then
+    exec_service_on_target $logger_service stop
+fi
+
+exec_service_on_target $logger_service restart
+cp /usr/share/logwatch/default.conf/services/*.conf /etc/logwatch/conf/services
+
+mv /etc/logwatch/conf/logwatch.conf /etc/logwatch/conf/logwatch.conf_bak
+cp data/logwatch.conf /etc/logwatch/conf/logwatch.conf
+
+mkdir test_dir
+logwatch --detail 10 --service kernel > test_dir/test.log
+
+if cat test_dir/test.log | grep "Kernel"
+then
+    echo " -> $test: TEST-PASS"
+else
+    echo " -> $test: TEST-FAIL"
+fi
+
+rm -fr test_dir
+rm -f /etc/logwatch/conf/services/*.conf
+
+exec_service_on_target $logger_service stop
+mv /etc/logwatch/conf/logwatch.conf_bak /etc/logwatch/conf/logwatch.conf
diff --git a/engine/tests/Functional.logwatch/tests/logwatch_help.sh b/engine/tests/Functional.logwatch/tests/logwatch_help.sh
new file mode 100644
index 0000000..1933592
--- /dev/null
+++ b/engine/tests/Functional.logwatch/tests/logwatch_help.sh
@@ -0,0 +1,13 @@
+#!/bin/sh
+
+#  In the target to execute command logwatch and confirm the result.
+#  option : --help
+
+test="help"
+
+if logwatch --help | grep "Usage"
+then
+    echo " -> $test: TEST-PASS"
+else
+    echo " -> $test: TEST-FAIL"
+fi
diff --git a/engine/tests/Functional.logwatch/tests/logwatch_mailto.sh b/engine/tests/Functional.logwatch/tests/logwatch_mailto.sh
new file mode 100644
index 0000000..91cf39a
--- /dev/null
+++ b/engine/tests/Functional.logwatch/tests/logwatch_mailto.sh
@@ -0,0 +1,43 @@
+#!/bin/sh
+
+#  Run logwatch and print the log to standard output.
+#  option: --mailto
+
+test="mailto"
+
+. ./fuego_board_function_lib.sh
+
+set_init_manager
+logger_service=$(detect_logger_service)
+
+if [ -e /var/run/syslog-ng.pid ]
+then
+    exec_service_on_target $logger_service stop
+fi
+
+exec_service_on_target $logger_service restart
+cp /usr/share/logwatch/default.conf/services/*.conf /etc/logwatch/conf/services
+
+mv /etc/logwatch/conf/logwatch.conf /etc/logwatch/conf/logwatch.conf_bak
+cp data/logwatch.conf /etc/logwatch/conf/logwatch.conf
+
+mv /etc/postfix/main.cf /etc/postfix/main.cf_bak
+cp data/main.cf /etc/postfix/main.cf
+
+exec_service_on_target postfix restart
+
+if [ ! -f /var/spool/mail/root ]
+then
+    touch /var/spool/mail/root
+fi
+
+logwatch --mailto root
+
+postqueue -f
+
+tail /var/spool/mail/root | grep "Logwatch"
+
+exec_service_on_target $logger_service stop
+exec_service_on_target postfix stop
+mv /etc/logwatch/conf/logwatch.conf_bak /etc/logwatch/conf/logwatch.conf
+mv /etc/postfix/main.cf_bak /etc/postfix/main.cf
-- 
1.8.3.1





More information about the Fuego mailing list