[Fuego] [PATCH] bgpd: add test cases for bgpd.
Zheng Ruoqin
zhengrq.fnst at cn.fujitsu.com
Tue Sep 18 03:08:49 UTC 2018
Before using these cases, you need to set remote_ifeth value in your
board file, for example:
$ cat myboard.board
remote_ifeth="eth0"
Signed-off-by: Zheng Ruoqin <zhengrq.fnst at cn.fujitsu.com>
---
engine/tests/Functional.bgpd/bgpd_test.sh | 4 ++
engine/tests/Functional.bgpd/data/bgpd.conf | 15 ++++++
engine/tests/Functional.bgpd/data/zebra.conf | 22 +++++++++
engine/tests/Functional.bgpd/fuego_test.sh | 23 ++++++++++
engine/tests/Functional.bgpd/parser.py | 22 +++++++++
engine/tests/Functional.bgpd/spec.json | 6 +++
engine/tests/Functional.bgpd/tests/bgpd_01.sh | 62 +++++++++++++++++++++++++
engine/tests/Functional.bgpd/tests/bgpd_02.sh | 66 +++++++++++++++++++++++++++
engine/tests/Functional.bgpd/tests/bgpd_03.sh | 62 +++++++++++++++++++++++++
engine/tests/Functional.bgpd/tests/bgpd_04.sh | 57 +++++++++++++++++++++++
10 files changed, 339 insertions(+)
create mode 100644 engine/tests/Functional.bgpd/bgpd_test.sh
create mode 100644 engine/tests/Functional.bgpd/data/bgpd.conf
create mode 100644 engine/tests/Functional.bgpd/data/zebra.conf
create mode 100644 engine/tests/Functional.bgpd/fuego_test.sh
create mode 100644 engine/tests/Functional.bgpd/parser.py
create mode 100644 engine/tests/Functional.bgpd/spec.json
create mode 100644 engine/tests/Functional.bgpd/tests/bgpd_01.sh
create mode 100644 engine/tests/Functional.bgpd/tests/bgpd_02.sh
create mode 100644 engine/tests/Functional.bgpd/tests/bgpd_03.sh
create mode 100644 engine/tests/Functional.bgpd/tests/bgpd_04.sh
diff --git a/engine/tests/Functional.bgpd/bgpd_test.sh b/engine/tests/Functional.bgpd/bgpd_test.sh
new file mode 100644
index 0000000..dd5ce37
--- /dev/null
+++ b/engine/tests/Functional.bgpd/bgpd_test.sh
@@ -0,0 +1,4 @@
+#!/bin/sh
+for i in tests/*.sh; do
+ sh $i
+done
diff --git a/engine/tests/Functional.bgpd/data/bgpd.conf b/engine/tests/Functional.bgpd/data/bgpd.conf
new file mode 100644
index 0000000..76000a9
--- /dev/null
+++ b/engine/tests/Functional.bgpd/data/bgpd.conf
@@ -0,0 +1,15 @@
+!
+! Zebra configuration saved from vty
+! 2000/01/01 02:27:41
+!
+hostname bgpd
+password zebra
+log file /var/log/quagga/bgpd.log
+log syslog informational
+!
+router bgp 7675
+ bgp router-id 192.168.0.15
+!
+line vty
+!
+
diff --git a/engine/tests/Functional.bgpd/data/zebra.conf b/engine/tests/Functional.bgpd/data/zebra.conf
new file mode 100644
index 0000000..7c8c216
--- /dev/null
+++ b/engine/tests/Functional.bgpd/data/zebra.conf
@@ -0,0 +1,22 @@
+!
+! Zebra configuration saved from vty
+! 2000/01/01 01:54:01
+!
+hostname Router
+password zebra
+enable password zebra
+log file /var/log/quagga/zebra.log
+log syslog informational
+!
+!interface bmap
+!
+!interface xxx
+!
+interface lo
+!
+ip route 192.168.246.0/24 eth0 reject
+!
+!ipv6 forwarding
+!
+line vty
+!
diff --git a/engine/tests/Functional.bgpd/fuego_test.sh b/engine/tests/Functional.bgpd/fuego_test.sh
new file mode 100644
index 0000000..a30f850
--- /dev/null
+++ b/engine/tests/Functional.bgpd/fuego_test.sh
@@ -0,0 +1,23 @@
+function test_pre_check {
+ is_on_target_path bgpd PROGRAM_BGPD
+ assert_define PROGRAM_BGPD "Missing 'BGPD' program on target board"
+ is_on_target_path zebra PROGRAM_ZEBRA
+ assert_define PROGRAM_ZEBRA "Missing 'zebra' program on target board"
+}
+
+function test_deploy {
+ put $TEST_HOME/bgpd_test.sh $BOARD_TESTDIR/fuego.$TESTDIR/
+ put $FUEGO_CORE/engine/scripts/fuego_board_function_lib.sh $BOARD_TESTDIR/fuego.$TESTDIR
+ put -r $TEST_HOME/tests $BOARD_TESTDIR/fuego.$TESTDIR/
+ put -r $TEST_HOME/data $BOARD_TESTDIR/fuego.$TESTDIR/
+}
+
+function test_run {
+ report "sed -i 's/!interface xxx/interface $remote_ifeth/' $BOARD_TESTDIR/fuego.$TESTDIR/data/zebra.conf"
+ report "cd $BOARD_TESTDIR/fuego.$TESTDIR; \
+ sh bgpd_test.sh"
+}
+
+function test_processing {
+ log_compare "$TESTDIR" "0" "TEST-FAIL" "n"
+}
diff --git a/engine/tests/Functional.bgpd/parser.py b/engine/tests/Functional.bgpd/parser.py
new file mode 100644
index 0000000..d85abd7
--- /dev/null
+++ b/engine/tests/Functional.bgpd/parser.py
@@ -0,0 +1,22 @@
+#!/usr/bin/python
+# See common.py for description of command-line arguments
+
+import os, sys, collections
+
+sys.path.insert(0, os.environ['FUEGO_CORE'] + '/engine/scripts/parser')
+import common as plib
+
+measurements = {}
+measurements = collections.OrderedDict()
+
+regex_string = '^ -> (.*): TEST-(.*)$'
+matches = plib.parse_log(regex_string)
+
+if matches:
+ for m in matches:
+ measurements['default.' + m[0]] = 'PASS' if m[1] == 'PASS' else 'FAIL'
+
+# split the output for each testcase
+plib.split_output_per_testcase(regex_string, measurements)
+
+sys.exit(plib.process(measurements))
diff --git a/engine/tests/Functional.bgpd/spec.json b/engine/tests/Functional.bgpd/spec.json
new file mode 100644
index 0000000..b297307
--- /dev/null
+++ b/engine/tests/Functional.bgpd/spec.json
@@ -0,0 +1,6 @@
+{
+ "testName": "Functional.bgpd",
+ "specs": {
+ "default": {}
+ }
+}
diff --git a/engine/tests/Functional.bgpd/tests/bgpd_01.sh b/engine/tests/Functional.bgpd/tests/bgpd_01.sh
new file mode 100644
index 0000000..34ed434
--- /dev/null
+++ b/engine/tests/Functional.bgpd/tests/bgpd_01.sh
@@ -0,0 +1,62 @@
+#!/bin/sh
+
+# In the target start bgpd and zebra, then confirm the process condition by command ps.
+# check the keyword "quagga/bgpd".
+
+test="bgpd01"
+
+. ./fuego_board_function_lib.sh
+
+set_init_manager
+
+exec_service_on_target bgpd stop
+exec_service_on_target zebra stop
+
+#Backup the config file
+mv /etc/quagga/bgpd.conf /etc/quagga/bgpd.conf.bck
+mv /etc/quagga/zebra.conf /etc/quagga/zebra.conf.bck
+
+cp data/bgpd.conf /etc/quagga/bgpd.conf
+cp data/zebra.conf /etc/quagga/zebra.conf
+chown quagga:quagga /etc/quagga/*.conf
+
+if exec_service_on_target bgpd start
+then
+ echo " -> start of bgpd succeeded."
+else
+ echo " -> start of bgpd failed."
+ echo " -> $test: TEST-FAIL"
+ exit
+fi
+
+if exec_service_on_target zebra start
+then
+ echo " -> start of zebra succeeded."
+else
+ echo " -> start of zebra failed."
+ echo " -> $test: TEST-FAIL"
+ exit
+fi
+
+if ps -N a | grep bgpd | grep ".*quagga/bgpd.*" | grep -v grep
+then
+ echo " -> get the pid of bgpd."
+else
+ echo " -> can't get the pid of bgpd."
+ echo " -> $test: TEST-FAIL"
+ exit
+fi
+
+exec_service_on_target bgpd stop
+exec_service_on_target zebra stop
+
+if ps -N a | grep bgpd | grep ".*quagga/bgpd.*" | grep -v grep
+then
+ echo " -> $test: TEST-FAIL"
+else
+ echo " -> $test: TEST-PASS"
+fi
+
+#Restore the config file
+mv /etc/quagga/bgpd.conf.bck /etc/quagga/bgpd.conf
+mv /etc/quagga/zebra.conf.bck /etc/quagga/zebra.conf
diff --git a/engine/tests/Functional.bgpd/tests/bgpd_02.sh b/engine/tests/Functional.bgpd/tests/bgpd_02.sh
new file mode 100644
index 0000000..586418a
--- /dev/null
+++ b/engine/tests/Functional.bgpd/tests/bgpd_02.sh
@@ -0,0 +1,66 @@
+#!/bin/sh
+
+# In the target start bgpd and zebra.
+# At the same time, start syslog-ng and check the keyword "bgpd" in syslog.
+
+test="bgpd02"
+
+. ./fuego_board_function_lib.sh
+
+set_init_manager
+
+exec_service_on_target bgpd stop
+exec_service_on_target zebra stop
+
+rm -f /var/run/quagga/bgpd.pid
+#Backup the config file
+mv /etc/quagga/bgpd.conf /etc/quagga/bgpd.conf.bck
+mv /etc/quagga/zebra.conf /etc/quagga/zebra.conf.bck
+
+cp data/bgpd.conf /etc/quagga/bgpd.conf
+cp data/zebra.conf /etc/quagga/zebra.conf
+chown quagga:quagga /etc/quagga/*.conf
+
+if exec_service_on_target syslog-ng restart
+then
+ echo " -> restart of syslog-ng succeeded."
+else
+ echo " -> restart of syslog-ng failed."
+ echo " -> $test: TEST-FAIL"
+ exit
+fi
+
+if exec_service_on_target bgpd start
+then
+ echo " -> start of bgpd succeeded."
+else
+ echo " -> start of bgpd failed."
+ echo " -> $test: TEST-FAIL"
+ exit
+fi
+
+if exec_service_on_target zebra start
+then
+ echo " -> start of zebra succeeded."
+else
+ echo " -> start of zebra failed."
+ echo " -> $test: TEST-FAIL"
+ exit
+fi
+
+if tail -n 20 /var/log/syslog | grep ".*bgpd.*"
+then
+ echo " -> get the syslog of bgpd."
+ echo " -> $test: TEST-PASS"
+else
+ echo " -> can't get the syslog of bgpd."
+ echo " -> $test: TEST-FAIL"
+ exit
+fi
+
+exec_service_on_target bgpd stop
+exec_service_on_target zebra stop
+
+#Restore the config file
+mv /etc/quagga/bgpd.conf.bck /etc/quagga/bgpd.conf
+mv /etc/quagga/zebra.conf.bck /etc/quagga/zebra.conf
diff --git a/engine/tests/Functional.bgpd/tests/bgpd_03.sh b/engine/tests/Functional.bgpd/tests/bgpd_03.sh
new file mode 100644
index 0000000..103b087
--- /dev/null
+++ b/engine/tests/Functional.bgpd/tests/bgpd_03.sh
@@ -0,0 +1,62 @@
+#!/bin/sh
+
+# In the target start bgpd and zebra, then confirm the process condition by /var/run/quagga/bgpd.pid file.
+# check the keyword "bgpd".
+
+test="bgpd03"
+
+. ./fuego_board_function_lib.sh
+
+set_init_manager
+
+exec_service_on_target bgpd stop
+exec_service_on_target zebra stop
+
+#Backup the config file
+mv /etc/quagga/bgpd.conf /etc/quagga/bgpd.conf.bck
+mv /etc/quagga/zebra.conf /etc/quagga/zebra.conf.bck
+
+cp data/bgpd.conf /etc/quagga/bgpd.conf
+cp data/zebra.conf /etc/quagga/zebra.conf
+chown quagga:quagga /etc/quagga/*.conf
+
+if exec_service_on_target bgpd start
+then
+ echo " -> start of bgpd succeeded."
+else
+ echo " -> start of bgpd failed."
+ echo " -> $test: TEST-FAIL"
+ exit
+fi
+
+if exec_service_on_target zebra start
+then
+ echo " -> start of zebra succeeded."
+else
+ echo " -> start of zebra failed."
+ echo " -> $test: TEST-FAIL"
+ exit
+fi
+
+if ls /var/run/quagga/bgpd.pid
+then
+ echo " -> get the pid of bgpd."
+else
+ echo " -> can't get the pid of bgpd."
+ echo " -> $test: TEST-FAIL"
+ exit
+fi
+
+exec_service_on_target bgpd stop
+exec_service_on_target zebra stop
+
+if ls /var/run/quagga/bgpd.pid
+then
+ echo " -> $test: TEST-FAIL"
+else
+ echo " -> $test: TEST-PASS"
+fi
+
+#Restore the config file
+mv /etc/quagga/bgpd.conf.bck /etc/quagga/bgpd.conf
+mv /etc/quagga/zebra.conf.bck /etc/quagga/zebra.conf
diff --git a/engine/tests/Functional.bgpd/tests/bgpd_04.sh b/engine/tests/Functional.bgpd/tests/bgpd_04.sh
new file mode 100644
index 0000000..1f741f8
--- /dev/null
+++ b/engine/tests/Functional.bgpd/tests/bgpd_04.sh
@@ -0,0 +1,57 @@
+#!/bin/sh
+
+# In the target start bgpd and zebra, then confirm the log file.
+# check the /var/log/quagga/bgpd.log file.
+
+test="bgpd04"
+
+. ./fuego_board_function_lib.sh
+
+set_init_manager
+
+exec_service_on_target bgpd stop
+exec_service_on_target zebra stop
+rm -f /var/log/quagga/bgpd.log
+
+#Backup the config file
+mv /etc/quagga/bgpd.conf /etc/quagga/bgpd.conf.bck
+mv /etc/quagga/zebra.conf /etc/quagga/zebra.conf.bck
+
+cp data/bgpd.conf /etc/quagga/bgpd.conf
+cp data/zebra.conf /etc/quagga/zebra.conf
+chown quagga:quagga /etc/quagga/*.conf
+
+if exec_service_on_target bgpd start
+then
+ echo " -> start of bgpd succeeded."
+else
+ echo " -> start of bgpd failed."
+ echo " -> $test: TEST-FAIL"
+ exit
+fi
+
+if exec_service_on_target zebra start
+then
+ echo " -> start of zebra succeeded."
+else
+ echo " -> start of zebra failed."
+ echo " -> $test: TEST-FAIL"
+ exit
+fi
+
+if ls /var/log/quagga/bgpd.log
+then
+ echo " -> get log file of bgpd."
+ echo " -> $test: TEST-PASS"
+else
+ echo " -> can't get log file of bgpd."
+ echo " -> $test: TEST-FAIL"
+ exit
+fi
+
+exec_service_on_target bgpd stop
+exec_service_on_target zebra stop
+
+#Restore the config file
+mv /etc/quagga/bgpd.conf.bck /etc/quagga/bgpd.conf
+mv /etc/quagga/zebra.conf.bck /etc/quagga/zebra.conf
--
1.8.3.1
More information about the Fuego
mailing list