[Fuego] [PATCH v3] vconfig: Add test cases of command vconfig.

Wang Mingyu wangmy at cn.fujitsu.com
Thu Apr 4 10:34:22 UTC 2019


Command vconfig is VLAN (802.1q) configuration program.
This test set is used to check the option to add/remove the vlan-device and set flat for it.

Signed-off-by: Wang Mingyu <wangmy at cn.fujitsu.com>
---
 tests/Functional.vconfig/fuego_test.sh             | 22 +++++++++++++++
 tests/Functional.vconfig/parser.py                 | 20 ++++++++++++++
 tests/Functional.vconfig/spec.json                 |  6 +++++
 tests/Functional.vconfig/test.yaml                 | 31 ++++++++++++++++++++++
 tests/Functional.vconfig/tests/vconfig_add.sh      | 16 +++++++++++
 tests/Functional.vconfig/tests/vconfig_addaddr.sh  | 17 ++++++++++++
 tests/Functional.vconfig/tests/vconfig_help.sh     | 13 +++++++++
 tests/Functional.vconfig/tests/vconfig_remove.sh   | 15 +++++++++++
 tests/Functional.vconfig/tests/vconfig_set_flag.sh | 16 +++++++++++
 tests/Functional.vconfig/tests/vconfig_tag.sh      | 29 ++++++++++++++++++++
 tests/Functional.vconfig/vconfig_test.sh           |  4 +++
 11 files changed, 189 insertions(+)
 create mode 100644 tests/Functional.vconfig/fuego_test.sh
 create mode 100644 tests/Functional.vconfig/parser.py
 create mode 100644 tests/Functional.vconfig/spec.json
 create mode 100644 tests/Functional.vconfig/test.yaml
 create mode 100644 tests/Functional.vconfig/tests/vconfig_add.sh
 create mode 100644 tests/Functional.vconfig/tests/vconfig_addaddr.sh
 create mode 100644 tests/Functional.vconfig/tests/vconfig_help.sh
 create mode 100644 tests/Functional.vconfig/tests/vconfig_remove.sh
 create mode 100644 tests/Functional.vconfig/tests/vconfig_set_flag.sh
 create mode 100644 tests/Functional.vconfig/tests/vconfig_tag.sh
 create mode 100755 tests/Functional.vconfig/vconfig_test.sh

diff --git a/tests/Functional.vconfig/fuego_test.sh b/tests/Functional.vconfig/fuego_test.sh
new file mode 100644
index 0000000..a73fdca
--- /dev/null
+++ b/tests/Functional.vconfig/fuego_test.sh
@@ -0,0 +1,22 @@
+function test_pre_check {
+    assert_has_program vconfig
+    assert_has_program tcpdump
+    assert_has_program ping
+}
+
+function test_deploy {
+    put $TEST_HOME/vconfig_test.sh $BOARD_TESTDIR/fuego.$TESTDIR/
+    put -r $TEST_HOME/tests $BOARD_TESTDIR/fuego.$TESTDIR/
+}
+
+function test_run {
+    report "cd $BOARD_TESTDIR/fuego.$TESTDIR;\
+    export vcon_ifeth=$IFETH;\
+    export vcon_ip1=$VCON_IP1;\
+    export vcon_ip2=$VCON_IP2;\
+    ./vconfig_test.sh"
+}
+
+function test_processing {
+    log_compare "$TESTDIR" "0" "TEST-FAIL" "n"
+}
diff --git a/tests/Functional.vconfig/parser.py b/tests/Functional.vconfig/parser.py
new file mode 100644
index 0000000..f25a608
--- /dev/null
+++ b/tests/Functional.vconfig/parser.py
@@ -0,0 +1,20 @@
+#!/usr/bin/python
+# See common.py for description of command-line arguments
+
+import os, sys, collections
+import common as plib
+
+measurements = {}
+measurements = collections.OrderedDict()
+
+regex_string = '^ -> (.*): TEST-(.*)$'
+matches = plib.parse_log(regex_string)
+
+if matches:
+    for m in matches:
+        measurements['default.' + m[0]] = 'PASS' if m[1] == 'PASS' else 'FAIL'
+
+# split the output for each testcase
+plib.split_output_per_testcase(regex_string, measurements)
+
+sys.exit(plib.process(measurements))
diff --git a/tests/Functional.vconfig/spec.json b/tests/Functional.vconfig/spec.json
new file mode 100644
index 0000000..a7a2618
--- /dev/null
+++ b/tests/Functional.vconfig/spec.json
@@ -0,0 +1,6 @@
+{
+    "testName": "Functional.vconfig",
+    "specs": {
+        "default": {}
+    }
+}
diff --git a/tests/Functional.vconfig/test.yaml b/tests/Functional.vconfig/test.yaml
new file mode 100644
index 0000000..4b562e8
--- /dev/null
+++ b/tests/Functional.vconfig/test.yaml
@@ -0,0 +1,31 @@
+fuego_package_version: 1
+name: Functional.vconfig
+description: |
+      The vconfig program allows you to create and remove vlan-devices on a vlan enabled kernel. 
+      Vlan-devices are virtual ethernet devices which represents the virtual lans on the physical lan.
+      This is a simple test to check the option help/add/rem/set_flag
+      of command vconfig. 
+license: Unknown
+author: Wang Mingyu <wangmy at cn.fujitsu.com>
+maintainer: Tim Bird <tim.bird at sony.com> 
+version: 1.00
+fuego_release: 1
+type: Functional
+tags: ['vlan']
+params:
+      IFETH="the eth interface in your target board" Defined in board file
+      VCON_IP1="IP address configured for eth interface" Defined in board file
+      VCON_IP2="IP address which the eth to access" Defined in board file
+data_files:
+ - vconfig_test.sh
+ - fuego_test.sh
+ - parser.py
+ - spec.json
+ - test.yaml
+ - tests
+   vconfig_addaddr.sh
+   vconfig_add.sh
+   vconfig_help.sh
+   vconfig_remove.sh
+   vconfig_set_flag.sh
+   vconfig_tag.sh
diff --git a/tests/Functional.vconfig/tests/vconfig_add.sh b/tests/Functional.vconfig/tests/vconfig_add.sh
new file mode 100644
index 0000000..1e2da17
--- /dev/null
+++ b/tests/Functional.vconfig/tests/vconfig_add.sh
@@ -0,0 +1,16 @@
+#!/bin/sh
+
+#  In target, run command vconfig.
+#  option: add
+
+test="add"
+
+vconfig add $vcon_ifeth 4
+
+if ifconfig $vcon_ifeth.4 | grep "$vcon_ifeth.4"
+then
+    echo " -> $test: TEST-PASS"
+else
+    echo " -> $test: TEST-FAIL"
+fi
+vconfig rem $vcon_ifeth.4
diff --git a/tests/Functional.vconfig/tests/vconfig_addaddr.sh b/tests/Functional.vconfig/tests/vconfig_addaddr.sh
new file mode 100644
index 0000000..c434e19
--- /dev/null
+++ b/tests/Functional.vconfig/tests/vconfig_addaddr.sh
@@ -0,0 +1,17 @@
+#!/bin/sh
+
+#  In target, run command vconfig.
+#  option: add/rem
+
+test="addaddr"
+
+vconfig add $vcon_ifeth 100
+ifconfig $vcon_ifeth.100 inet 192.168.255.1 netmask 0xffffff00
+
+if ifconfig $vcon_ifeth.100 | grep "192.168.255.1"
+then
+    echo " -> $test: TEST-PASS"
+else
+    echo " -> $test: TEST-FAIL"
+fi
+vconfig rem $vcon_ifeth.100
diff --git a/tests/Functional.vconfig/tests/vconfig_help.sh b/tests/Functional.vconfig/tests/vconfig_help.sh
new file mode 100644
index 0000000..43314f3
--- /dev/null
+++ b/tests/Functional.vconfig/tests/vconfig_help.sh
@@ -0,0 +1,13 @@
+#!/bin/sh
+
+#  In target, run command vconfig.
+#  option: none
+
+test="help"
+
+if vconfig | grep Usage
+then
+    echo " -> $test: TEST-PASS"
+else
+    echo " -> $test: TEST-FAIL"
+fi;
diff --git a/tests/Functional.vconfig/tests/vconfig_remove.sh b/tests/Functional.vconfig/tests/vconfig_remove.sh
new file mode 100644
index 0000000..76a1047
--- /dev/null
+++ b/tests/Functional.vconfig/tests/vconfig_remove.sh
@@ -0,0 +1,15 @@
+#!/bin/sh
+
+#  In target, run command vconfig.
+#  option: rem
+
+test="remove"
+
+vconfig add $vcon_ifeth 4
+
+if vconfig rem $vcon_ifeth.4 | grep "Removed VLAN"
+then
+    echo " -> $test: TEST-PASS"
+else
+    echo " -> $test: TEST-FAIL"
+fi
diff --git a/tests/Functional.vconfig/tests/vconfig_set_flag.sh b/tests/Functional.vconfig/tests/vconfig_set_flag.sh
new file mode 100644
index 0000000..9194278
--- /dev/null
+++ b/tests/Functional.vconfig/tests/vconfig_set_flag.sh
@@ -0,0 +1,16 @@
+#!/bin/sh
+
+#  In target, run command vconfig.
+#  option: set_flag
+
+test="set_flag"
+
+vconfig add $vcon_ifeth 4
+
+if vconfig set_flag $vcon_ifeth.4 1 | grep "Set flag on device"
+then
+    echo " -> $test: TEST-PASS"
+else
+    echo " -> $test: TEST-FAIL"
+fi
+vconfig rem $vcon_ifeth.4
diff --git a/tests/Functional.vconfig/tests/vconfig_tag.sh b/tests/Functional.vconfig/tests/vconfig_tag.sh
new file mode 100644
index 0000000..f1298fd
--- /dev/null
+++ b/tests/Functional.vconfig/tests/vconfig_tag.sh
@@ -0,0 +1,29 @@
+#!/bin/sh
+
+#  In target, run command vconfig.
+#  option: add/rem
+
+test="tag"
+
+mkdir test_dir
+
+ifconfig $vcon_ifeth up
+vconfig add $vcon_ifeth 100
+
+# specify the address to vlanif by ifconfig. 
+ifconfig $vcon_ifeth.100 inet $vcon_ip1 netmask 0xffffff00
+
+# to verify the IP address exists and can accept requests.
+ping -q -c 50 -I $vcon_ifeth.100 $vcon_ip2 &
+
+# check the VLAN tag by tcpdump.
+tcpdump -c 10 -ex -i $vcon_ifeth ether broadcast > test_dir/dumpdata
+
+if cat test_dir/dumpdata | grep "vlan 100"
+then
+    echo " -> $test: TEST-PASS"
+else
+    echo " -> $test: TEST-FAIL"
+fi
+rm -fr test_dir
+vconfig rem $vcon_ifeth.100
diff --git a/tests/Functional.vconfig/vconfig_test.sh b/tests/Functional.vconfig/vconfig_test.sh
new file mode 100755
index 0000000..dd5ce37
--- /dev/null
+++ b/tests/Functional.vconfig/vconfig_test.sh
@@ -0,0 +1,4 @@
+#!/bin/sh
+for i in tests/*.sh; do
+    sh $i
+done
-- 
1.8.3.1





More information about the Fuego mailing list