[Fuego] [PATCH] lvm: Add test cases for lvm.
Tim.Bird at sony.com
Tim.Bird at sony.com
Mon Sep 30 21:46:59 UTC 2019
This looks OK. Applied to 'master' branch.
I don't have a system here that uses logical volumes, so I have not tested this.
-- Tim
> -----Original Message-----
> From: Wang Mingyu on Tuesday, September 10, 2019 3:20 PM
> To: fuego at lists.linuxfoundation.org
> Subject: [Fuego] [PATCH] lvm: Add test cases for lvm.
>
> Lvm provides the command-line tools for LVM2.
> This test set is used to check built-in commands of lvm.
>
> Signed-off-by: Wang Mingyu <wangmy at cn.fujitsu.com>
> ---
> tests/Functional.lvm/fuego_test.sh | 18 ++++++++++
> tests/Functional.lvm/lvm_test.sh | 4 +++
> tests/Functional.lvm/parser.py | 22 ++++++++++++
> tests/Functional.lvm/spec.json | 7 ++++
> tests/Functional.lvm/tests/lvm2-monitor_ps.sh | 34
> +++++++++++++++++++
> tests/Functional.lvm/tests/lvm_dumpconfig.sh | 13 +++++++
> tests/Functional.lvm/tests/lvm_formats.sh | 13 +++++++
> tests/Functional.lvm/tests/lvm_help.sh | 13 +++++++
> tests/Functional.lvm/tests/lvm_lvmdiskscan.sh | 13 +++++++
> tests/Functional.lvm/tests/lvm_segtypes.sh | 13 +++++++
> tests/Functional.lvm/tests/lvm_version.sh | 13 +++++++
> tests/Functional.lvm/tests/lvm_vgdisplay.sh | 13 +++++++
> 12 files changed, 176 insertions(+)
> create mode 100644 tests/Functional.lvm/fuego_test.sh
> create mode 100644 tests/Functional.lvm/lvm_test.sh
> create mode 100644 tests/Functional.lvm/parser.py
> create mode 100644 tests/Functional.lvm/spec.json
> create mode 100644 tests/Functional.lvm/tests/lvm2-monitor_ps.sh
> create mode 100644 tests/Functional.lvm/tests/lvm_dumpconfig.sh
> create mode 100644 tests/Functional.lvm/tests/lvm_formats.sh
> create mode 100644 tests/Functional.lvm/tests/lvm_help.sh
> create mode 100644 tests/Functional.lvm/tests/lvm_lvmdiskscan.sh
> create mode 100644 tests/Functional.lvm/tests/lvm_segtypes.sh
> create mode 100644 tests/Functional.lvm/tests/lvm_version.sh
> create mode 100644 tests/Functional.lvm/tests/lvm_vgdisplay.sh
>
> diff --git a/tests/Functional.lvm/fuego_test.sh
> b/tests/Functional.lvm/fuego_test.sh
> new file mode 100644
> index 0000000..22cb514
> --- /dev/null
> +++ b/tests/Functional.lvm/fuego_test.sh
> @@ -0,0 +1,18 @@
> +function test_pre_check {
> + assert_has_program lvm
> +}
> +
> +function test_deploy {
> + put $TEST_HOME/lvm_test.sh $BOARD_TESTDIR/fuego.$TESTDIR/
> + put $FUEGO_CORE/engine/scripts/fuego_board_function_lib.sh
> $BOARD_TESTDIR/fuego.$TESTDIR
> + put -r $TEST_HOME/tests $BOARD_TESTDIR/fuego.$TESTDIR/
> +}
> +
> +function test_run {
> + report "cd $BOARD_TESTDIR/fuego.$TESTDIR;\
> + ./lvm_test.sh"
> +}
> +
> +function test_processing {
> + log_compare "$TESTDIR" "0" "TEST-FAIL" "n"
> +}
> diff --git a/tests/Functional.lvm/lvm_test.sh
> b/tests/Functional.lvm/lvm_test.sh
> new file mode 100644
> index 0000000..dd5ce37
> --- /dev/null
> +++ b/tests/Functional.lvm/lvm_test.sh
> @@ -0,0 +1,4 @@
> +#!/bin/sh
> +for i in tests/*.sh; do
> + sh $i
> +done
> diff --git a/tests/Functional.lvm/parser.py b/tests/Functional.lvm/parser.py
> new file mode 100644
> index 0000000..d85abd7
> --- /dev/null
> +++ b/tests/Functional.lvm/parser.py
> @@ -0,0 +1,22 @@
> +#!/usr/bin/python
> +# See common.py for description of command-line arguments
> +
> +import os, sys, collections
> +
> +sys.path.insert(0, os.environ['FUEGO_CORE'] + '/engine/scripts/parser')
> +import common as plib
> +
> +measurements = {}
> +measurements = collections.OrderedDict()
> +
> +regex_string = '^ -> (.*): TEST-(.*)$'
> +matches = plib.parse_log(regex_string)
> +
> +if matches:
> + for m in matches:
> + measurements['default.' + m[0]] = 'PASS' if m[1] == 'PASS' else 'FAIL'
> +
> +# split the output for each testcase
> +plib.split_output_per_testcase(regex_string, measurements)
> +
> +sys.exit(plib.process(measurements))
> diff --git a/tests/Functional.lvm/spec.json b/tests/Functional.lvm/spec.json
> new file mode 100644
> index 0000000..62e1efd
> --- /dev/null
> +++ b/tests/Functional.lvm/spec.json
> @@ -0,0 +1,7 @@
> +{
> + "testName": "Functional.lvm",
> + "specs": {
> + "default": {}
> + }
> +}
> +
> diff --git a/tests/Functional.lvm/tests/lvm2-monitor_ps.sh
> b/tests/Functional.lvm/tests/lvm2-monitor_ps.sh
> new file mode 100644
> index 0000000..abee513
> --- /dev/null
> +++ b/tests/Functional.lvm/tests/lvm2-monitor_ps.sh
> @@ -0,0 +1,34 @@
> +#!/bin/sh
> +
> +# In the target start lvm2-monitor, and confirm the process condition by
> command ps.
> +
> +test="ps"
> +
> +. ./fuego_board_function_lib.sh
> +
> +set_init_manager
> +
> +service_status=$(get_service_status lvm2-monitor)
> +
> +exec_service_on_target lvm2-monitor stop
> +
> +if exec_service_on_target lvm2-monitor start
> +then
> + echo " -> start of lvm2-monitor succeeded."
> +else
> + echo " -> start of lvm2-monitor failed."
> + echo " -> $test: TEST-FAIL"
> + exit
> +fi
> +
> +if ps aux | grep "[/]usr/sbin/lvmetad"
> +then
> + echo " -> get the pid of lvmetad."
> +else
> + echo " -> can't get the pid of lvmetad."
> + echo " -> $test: TEST-FAIL"
> +fi
> +if [ "$service_status" = "inactive" ]
> +then
> + exec_service_on_target lvm2-monitor stop
> +fi
> diff --git a/tests/Functional.lvm/tests/lvm_dumpconfig.sh
> b/tests/Functional.lvm/tests/lvm_dumpconfig.sh
> new file mode 100644
> index 0000000..45dc46e
> --- /dev/null
> +++ b/tests/Functional.lvm/tests/lvm_dumpconfig.sh
> @@ -0,0 +1,13 @@
> +#!/bin/sh
> +
> +# In target, display the configuration information.
> +# option: none
> +
> +test="dumpconfig"
> +
> +if lvm dumpconfig | grep "devices"
> +then
> + echo " -> $test: TEST-PASS"
> +else
> + echo " -> $test: TEST-FAIL"
> +fi
> diff --git a/tests/Functional.lvm/tests/lvm_formats.sh
> b/tests/Functional.lvm/tests/lvm_formats.sh
> new file mode 100644
> index 0000000..993c761
> --- /dev/null
> +++ b/tests/Functional.lvm/tests/lvm_formats.sh
> @@ -0,0 +1,13 @@
> +#!/bin/sh
> +
> +# In target, display recognised metadata formats.
> +# option: none
> +
> +test="formats"
> +
> +if lvm formats | grep "lvm"
> +then
> + echo " -> $test: TEST-PASS"
> +else
> + echo " -> $test: TEST-FAIL"
> +fi
> diff --git a/tests/Functional.lvm/tests/lvm_help.sh
> b/tests/Functional.lvm/tests/lvm_help.sh
> new file mode 100644
> index 0000000..dcfe566
> --- /dev/null
> +++ b/tests/Functional.lvm/tests/lvm_help.sh
> @@ -0,0 +1,13 @@
> +#!/bin/sh
> +
> +# In target, display the help text.
> +# option: none
> +
> +test="help"
> +
> +if lvm help
> +then
> + echo " -> $test: TEST-PASS"
> +else
> + echo " -> $test: TEST-FAIL"
> +fi
> diff --git a/tests/Functional.lvm/tests/lvm_lvmdiskscan.sh
> b/tests/Functional.lvm/tests/lvm_lvmdiskscan.sh
> new file mode 100644
> index 0000000..a015dfa
> --- /dev/null
> +++ b/tests/Functional.lvm/tests/lvm_lvmdiskscan.sh
> @@ -0,0 +1,13 @@
> +#!/bin/sh
> +
> +# In target, scan for all devices visible to LVM2.
> +# option: none
> +
> +test="lvmdiskscan"
> +
> +if lvmdiskscan | grep "partitions"
> +then
> + echo " -> $test: TEST-PASS"
> +else
> + echo " -> $test: TEST-FAIL"
> +fi
> diff --git a/tests/Functional.lvm/tests/lvm_segtypes.sh
> b/tests/Functional.lvm/tests/lvm_segtypes.sh
> new file mode 100644
> index 0000000..e30bcf2
> --- /dev/null
> +++ b/tests/Functional.lvm/tests/lvm_segtypes.sh
> @@ -0,0 +1,13 @@
> +#!/bin/sh
> +
> +# In target, display recognised Logical Volume segment types.
> +# option: none
> +
> +test="segtypes"
> +
> +if lvm segtypes
> +then
> + echo " -> $test: TEST-PASS"
> +else
> + echo " -> $test: TEST-FAIL"
> +fi
> diff --git a/tests/Functional.lvm/tests/lvm_version.sh
> b/tests/Functional.lvm/tests/lvm_version.sh
> new file mode 100644
> index 0000000..f52710d
> --- /dev/null
> +++ b/tests/Functional.lvm/tests/lvm_version.sh
> @@ -0,0 +1,13 @@
> +#!/bin/sh
> +
> +# In target, display the version information.
> +# option: none
> +
> +test="version"
> +
> +if lvm version | grep "LVM version"
> +then
> + echo " -> $test: TEST-PASS"
> +else
> + echo " -> $test: TEST-FAIL"
> +fi
> diff --git a/tests/Functional.lvm/tests/lvm_vgdisplay.sh
> b/tests/Functional.lvm/tests/lvm_vgdisplay.sh
> new file mode 100644
> index 0000000..a72fd4d
> --- /dev/null
> +++ b/tests/Functional.lvm/tests/lvm_vgdisplay.sh
> @@ -0,0 +1,13 @@
> +#!/bin/sh
> +
> +# In target, display attributes of volume groups.
> +# option: none
> +
> +test="vgdisplay"
> +
> +if vgdisplay
> +then
> + echo " -> $test: TEST-PASS"
> +else
> + echo " -> $test: TEST-FAIL"
> +fi
> --
> 2.17.1
>
>
>
> _______________________________________________
> Fuego mailing list
> Fuego at lists.linuxfoundation.org
> https://lists.linuxfoundation.org/mailman/listinfo/fuego
More information about the Fuego
mailing list