[PATCH 5/9] PCI: host: brcmstb: add dma-ranges for inbound traffic

Jim Quinlan jim2101024 at gmail.com
Thu Oct 12 21:43:13 UTC 2017


On Thu, Oct 12, 2017 at 2:04 PM, Robin Murphy <robin.murphy at arm.com> wrote:
> [+DMA API maintainers]
>
> On 11/10/17 23:34, Jim Quinlan wrote:
>> The Broadcom STB PCIe host controller is intimately related to the
>> memory subsystem.  This close relationship adds complexity to how cpu
>> system memory is mapped to PCIe memory.  Ideally, this mapping is an
>> identity mapping, or an identity mapping off by a constant.  Not so in
>> this case.
>>
>> Consider the Broadcom reference board BCM97445LCC_4X8 which has 6 GB
>> of system memory.  Here is how the PCIe controller maps the
>> system memory to PCIe memory:
>>
>>   memc0-a@[        0....3fffffff] <=> pci@[        0....3fffffff]
>>   memc0-b@[100000000...13fffffff] <=> pci@[ 40000000....7fffffff]
>>   memc1-a@[ 40000000....7fffffff] <=> pci@[ 80000000....bfffffff]
>>   memc1-b@[300000000...33fffffff] <=> pci@[ c0000000....ffffffff]
>>   memc2-a@[ 80000000....bfffffff] <=> pci@[100000000...13fffffff]
>>   memc2-b@[c00000000...c3fffffff] <=> pci@[140000000...17fffffff]
>>
>> Although there are some "gaps" that can be added between the
>> individual mappings by software, the permutation of memory regions for
>> the most part is fixed by HW.  The solution of having something close
>> to an identity mapping is not possible.
>>
>> The idea behind this HW design is that the same PCIe module can
>> act as an RC or EP, and if it acts as an EP it concatenates all
>> of system memory into a BAR so anything can be accessed.  Unfortunately,
>> when the PCIe block is in the role of an RC it also presents this
>> "BAR" to downstream PCIe devices, rather than offering an identity map
>> between its system memory and PCIe space.
>>
>> Suppose that an endpoint driver allocs some DMA memory.  Suppose this
>> memory is located at 0x6000_0000, which is in the middle of memc1-a.
>> The driver wants a dma_addr_t value that it can pass on to the EP to
>> use.  Without doing any custom mapping, the EP will use this value for
>> DMA: the driver will get a dma_addr_t equal to 0x6000_0000.  But this
>> won't work; the device needs a dma_addr_t that reflects the PCIe space
>> address, namely 0xa000_0000.
>>
>> So, essentially the solution to this problem must modify the
>> dma_addr_t returned by the DMA routines routines.  There are two
>> ways (I know of) of doing this:
>>
>> (a) overriding/redefining the dma_to_phys() and phys_to_dma() calls
>> that are used by the dma_ops routines.  This is the approach of
>>
>>       arch/mips/cavium-octeon/dma-octeon.c
>>
>> In ARM and ARM64 these two routines are defiend in asm/dma-mapping.h
>> as static inline functions.
>>
>> (b) Subscribe to a notifier that notifies when a device is added to a
>> bus.  When this happens, set_dma_ops() can be called for the device.
>> This method is mentioned in:
>>
>>     http://lxr.free-electrons.com/source/drivers/of/platform.c?v=3.16#L152
>>
>> where it says as a comment
>>
>>     "In case if platform code need to use own special DMA
>>     configuration, it can use Platform bus notifier and
>>     handle BUS_NOTIFY_ADD_DEVICE event to fix up DMA
>>     configuration."
>>
>> Solution (b) is what this commit does.  It uses the native dma_ops
>> as the base set of operations, and overrides some with custom
>> functions that translate the address and then call the base
>> function.
>>
>> Signed-off-by: Jim Quinlan <jim2101024 at gmail.com>
>> ---
>>  drivers/pci/host/Makefile          |   3 +-
>>  drivers/pci/host/pci-brcmstb-dma.c | 219 +++++++++++++++++++++++++++++++++++++
>>  drivers/pci/host/pci-brcmstb.c     | 150 +++++++++++++++++++++++--
>>  drivers/pci/host/pci-brcmstb.h     |   7 ++
>>  4 files changed, 368 insertions(+), 11 deletions(-)
>>  create mode 100644 drivers/pci/host/pci-brcmstb-dma.c
>>
>> diff --git a/drivers/pci/host/Makefile b/drivers/pci/host/Makefile
>> index 4398d2c..c283321 100644
>> --- a/drivers/pci/host/Makefile
>> +++ b/drivers/pci/host/Makefile
>> @@ -21,7 +21,8 @@ obj-$(CONFIG_PCIE_ROCKCHIP) += pcie-rockchip.o
>>  obj-$(CONFIG_PCIE_MEDIATEK) += pcie-mediatek.o
>>  obj-$(CONFIG_PCIE_TANGO_SMP8759) += pcie-tango.o
>>  obj-$(CONFIG_VMD) += vmd.o
>> -obj-$(CONFIG_PCI_BRCMSTB) += pci-brcmstb.o
>> +obj-$(CONFIG_PCI_BRCMSTB) += brcmstb-pci.o
>> +brcmstb-pci-objs := pci-brcmstb.o pci-brcmstb-dma.o
>>
>>  # The following drivers are for devices that use the generic ACPI
>>  # pci_root.c driver but don't support standard ECAM config access.
>> diff --git a/drivers/pci/host/pci-brcmstb-dma.c b/drivers/pci/host/pci-brcmstb-dma.c
>> new file mode 100644
>> index 0000000..81ce122
>> --- /dev/null
>> +++ b/drivers/pci/host/pci-brcmstb-dma.c
>> @@ -0,0 +1,219 @@
>> +/*
>> + * Copyright (C) 2015-2017 Broadcom
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 as
>> + * published by the Free Software Foundation.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> + * GNU General Public License for more details.
>> + *
>> + */
>> +#include <linux/dma-mapping.h>
>> +#include <linux/init.h>
>> +#include <linux/io.h>
>> +#include <linux/kernel.h>
>> +#include <linux/of_address.h>
>> +#include <linux/pci.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/smp.h>
>> +
>> +#include "pci-brcmstb.h"
>> +
>> +static const struct dma_map_ops *arch_dma_ops;
>> +static struct dma_map_ops brcm_dma_ops;
>> +
>> +static void *brcm_dma_alloc(struct device *dev, size_t size, dma_addr_t *handle,
>> +                         gfp_t gfp, unsigned long attrs)
>> +{
>> +     void *ret;
>> +
>> +     ret = arch_dma_ops->alloc(dev, size, handle, gfp, attrs);
>> +     if (ret)
>> +             *handle = brcm_to_pci(*handle);
>> +     return ret;
>> +}
>> +
>> +static void brcm_dma_free(struct device *dev, size_t size, void *cpu_addr,
>> +                       dma_addr_t handle, unsigned long attrs)
>> +{
>> +     handle = brcm_to_cpu(handle);
>> +     arch_dma_ops->free(dev, size, cpu_addr, handle, attrs);
>> +}
>> +
>> +static int brcm_dma_mmap(struct device *dev, struct vm_area_struct *vma,
>> +                      void *cpu_addr, dma_addr_t dma_addr, size_t size,
>> +                      unsigned long attrs)
>> +{
>> +     dma_addr = brcm_to_cpu(dma_addr);
>> +     return arch_dma_ops->mmap(dev, vma, cpu_addr, dma_addr, size, attrs);
>> +}
>> +
>> +static int brcm_dma_get_sgtable(struct device *dev, struct sg_table *sgt,
>> +                             void *cpu_addr, dma_addr_t handle, size_t size,
>> +                             unsigned long attrs)
>> +{
>> +     handle = brcm_to_cpu(handle);
>> +     return arch_dma_ops->get_sgtable(dev, sgt, cpu_addr, handle, size,
>> +                                    attrs);
>> +}
>> +
>> +static dma_addr_t brcm_dma_map_page(struct device *dev, struct page *page,
>> +                                 unsigned long offset, size_t size,
>> +                                 enum dma_data_direction dir,
>> +                                 unsigned long attrs)
>> +{
>> +     return brcm_to_pci(arch_dma_ops->map_page(dev, page, offset, size,
>> +                                               dir, attrs));
>> +}
>> +
>> +static void brcm_dma_unmap_page(struct device *dev, dma_addr_t handle,
>> +                             size_t size, enum dma_data_direction dir,
>> +                             unsigned long attrs)
>> +{
>> +     handle = brcm_to_cpu(handle);
>> +     arch_dma_ops->unmap_page(dev, handle, size, dir, attrs);
>> +}
>> +
>> +static int brcm_dma_map_sg(struct device *dev, struct scatterlist *sgl,
>> +                        int nents, enum dma_data_direction dir,
>> +                        unsigned long attrs)
>> +{
>> +     int ret, i;
>> +     struct scatterlist *sg;
>> +
>> +     ret = arch_dma_ops->map_sg(dev, sgl, nents, dir, attrs);
>> +     /* The ARM and MIPS implementations of map_sg and unmap_sg
>> +      * make calls to ops->map_page(), which we already intercept.
>> +      * The ARM64 does not, so we must iterate through the SG list
>> +      * and  convert each dma_address to one that is compatible
>> +      * with our PCI RC implementation.
>> +      */
>
> That's a pretty fragile assumption given that arch code is free to
> change, and anyone doing so is unlikely to be aware of your driver.
> You'd be better off implementing these in terms of {brcm_dma_}map_page
> directly.
>
Will fix.

>> +     if (IS_ENABLED(CONFIG_ARM64))
>> +             for_each_sg(sgl, sg, ret, i)
>> +                     sg->dma_address = brcm_to_pci(sg->dma_address);
>> +     return ret;
>> +}
>> +
>> +static void brcm_dma_unmap_sg(struct device *dev,
>> +                           struct scatterlist *sgl, int nents,
>> +                           enum dma_data_direction dir,
>> +                           unsigned long attrs)
>> +{
>> +     int i;
>> +     struct scatterlist *sg;
>> +
>> +     /* The ARM and MIPS implementations of map_sg and unmap_sg
>> +      * make calls to ops->map_page(), which we already intercept.
>> +      * The ARM64 does not, so we must iterate through the SG list
>> +      * and  convert each dma_address to one that is compatible
>> +      * with our PCI RC implementation.
>> +      */
>> +     if (IS_ENABLED(CONFIG_ARM64))
>> +             for_each_sg(sgl, sg, nents, i)
>> +                     sg->dma_address = brcm_to_cpu(sg->dma_address);
>> +     arch_dma_ops->map_sg(dev, sgl, nents, dir, attrs);
>> +}
>> +
>> +static void brcm_dma_sync_single_for_cpu(struct device *dev,
>> +                                      dma_addr_t handle, size_t size,
>> +                                      enum dma_data_direction dir)
>> +{
>> +     handle = brcm_to_cpu(handle);
>> +     arch_dma_ops->sync_single_for_cpu(dev, handle, size, dir);
>> +}
>> +
>> +static void brcm_dma_sync_single_for_device(struct device *dev,
>> +                                         dma_addr_t handle, size_t size,
>> +                                         enum dma_data_direction dir)
>> +{
>> +     handle = brcm_to_cpu(handle);
>> +     arch_dma_ops->sync_single_for_device(dev, handle, size, dir);
>> +}
>
> And sync_sg_*()? They might not be that commonly used by in-tree
> drivers, but who knows what lurks beyond?
>
Will fix.

>> +
>> +static dma_addr_t brcm_dma_map_resource(struct device *dev, phys_addr_t phys,
>> +                                     size_t size,
>> +                                     enum dma_data_direction dir,
>> +                                     unsigned long attrs)
>> +{
>> +     return brcm_to_pci(arch_dma_ops->map_resource
>> +                        (dev, phys, size, dir, attrs));
>> +}
>> +
>> +static void brcm_dma_unmap_resource(struct device *dev, dma_addr_t handle,
>> +                                 size_t size, enum dma_data_direction dir,
>> +                                 unsigned long attrs)
>> +{
>> +     handle = brcm_to_cpu(handle);
>> +     arch_dma_ops->unmap_resource(dev, handle, size, dir, attrs);
>> +}
>> +
>> +static int brcm_mapping_error(struct device *dev, dma_addr_t dma_addr)
>> +{
>> +     return dma_addr == BRCMSTB_ERROR_CODE;
>
> Huh? How do you know this will work correctly with every platform's
> ->map_page implementation (hint: it doesn't).
>
Will fix.

>> +}
>> +
>> +static const struct dma_map_ops *brcm_get_arch_dma_ops(struct device *dev)
>> +{
>> +#if defined(CONFIG_MIPS)
>> +     return mips_dma_map_ops;
>> +#elif defined(CONFIG_ARM)
>> +     return &arm_dma_ops;
>> +#elif defined(CONFIG_ARM64)
>> +     /* swiotlb_dma_ops is a static var, so we get ahold
>> +      * of it by calling arch_setup_dma_ops(...).
>> +      */
>> +     arch_setup_dma_ops(dev, 0, 0, NULL, false);
>> +     return dev->dma_ops;
>> +#endif
>> +     return 0;
>> +}
>
> As mentioned earlier, no. There are theoretical cases where it might not
> be true, but in practice you can assume all PCI devices are going to get
> the same DMA ops as their associated host controller (and that's still a
> better assumption that what you have here), so you can just grab those
> at the point you install the notifier.
>
Yes, for some reason I did not know of get_dma_ops() and I wrote my
own, poorly.  Will fix.

>> +
>> +static void brcm_set_dma_ops(struct device *dev)
>> +{
>> +     arch_dma_ops = brcm_get_arch_dma_ops(dev);
>> +     if (!arch_dma_ops)
>> +             return;
>> +
>> +     /* Set all of the base operations; some will be overridden */
>> +     brcm_dma_ops = *arch_dma_ops;
>> +
>> +     /* Insert the Brcm-specific override operations */
>> +     brcm_dma_ops.alloc = brcm_dma_alloc;
>> +     brcm_dma_ops.free = brcm_dma_free;
>> +     brcm_dma_ops.mmap = brcm_dma_mmap;
>> +     brcm_dma_ops.get_sgtable = brcm_dma_get_sgtable;
>> +     brcm_dma_ops.map_page = brcm_dma_map_page;
>> +     brcm_dma_ops.unmap_page = brcm_dma_unmap_page;
>> +     brcm_dma_ops.sync_single_for_cpu = brcm_dma_sync_single_for_cpu;
>> +     brcm_dma_ops.sync_single_for_device = brcm_dma_sync_single_for_device;
>> +     brcm_dma_ops.map_sg = brcm_dma_map_sg;
>> +     brcm_dma_ops.unmap_sg = brcm_dma_unmap_sg;
>> +     if (arch_dma_ops->map_resource)
>> +             brcm_dma_ops.map_resource = brcm_dma_map_resource;
>> +     if (arch_dma_ops->unmap_resource)
>> +             brcm_dma_ops.unmap_resource = brcm_dma_unmap_resource;
>> +     brcm_dma_ops.mapping_error = brcm_mapping_error;
>> +
>> +     /* Use our brcm_dma_ops for this driver */
>> +     set_dma_ops(dev, &brcm_dma_ops);
>> +}
>
> Just have a static const set of ops like everyone else - you can handle
> the conditionality of ->{map,unmap}_resource inside the brcm_* wrappers.
>
Will fix.

>> +
>> +static int brcmstb_platform_notifier(struct notifier_block *nb,
>> +                                  unsigned long event, void *__dev)
>> +{
>> +     struct device *dev = __dev;
>> +
>> +     if (event != BUS_NOTIFY_ADD_DEVICE)
>> +             return NOTIFY_DONE;
>> +
>> +     brcm_set_dma_ops(dev);
>> +     return NOTIFY_OK;
>> +}
>> +
>> +struct notifier_block brcmstb_platform_nb = {
>> +     .notifier_call = brcmstb_platform_notifier,
>> +};
>> +EXPORT_SYMBOL(brcmstb_platform_nb);
>> diff --git a/drivers/pci/host/pci-brcmstb.c b/drivers/pci/host/pci-brcmstb.c
>> index f4cd6e7..03c0da9 100644
>> --- a/drivers/pci/host/pci-brcmstb.c
>> +++ b/drivers/pci/host/pci-brcmstb.c
>> @@ -343,6 +343,8 @@ struct brcm_pcie {
>>
>>  static struct list_head brcm_pcie = LIST_HEAD_INIT(brcm_pcie);
>>  static phys_addr_t scb_size[BRCM_MAX_SCB];
>> +static struct of_pci_range *dma_ranges;
>> +static int num_dma_ranges;
>>  static int num_memc;
>>  static DEFINE_MUTEX(brcm_pcie_lock);
>>
>> @@ -362,6 +364,8 @@ static int brcm_pcie_add_controller(struct brcm_pcie *pcie)
>>  {
>>       mutex_lock(&brcm_pcie_lock);
>>       snprintf(pcie->name, sizeof(pcie->name) - 1, "PCIe%d", pcie->id);
>> +     if (list_empty(&brcm_pcie))
>> +             bus_register_notifier(&pci_bus_type, &brcmstb_platform_nb);
>>       list_add_tail(&pcie->list, &brcm_pcie);
>>       mutex_unlock(&brcm_pcie_lock);
>>
>> @@ -378,8 +382,14 @@ static void brcm_pcie_remove_controller(struct brcm_pcie *pcie)
>>               tmp = list_entry(pos, struct brcm_pcie, list);
>>               if (tmp == pcie) {
>>                       list_del(pos);
>> -                     if (list_empty(&brcm_pcie))
>> +                     if (list_empty(&brcm_pcie)) {
>> +                             bus_unregister_notifier(&pci_bus_type,
>> +                                                     &brcmstb_platform_nb);
>> +                             kfree(dma_ranges);
>> +                             dma_ranges = NULL;
>> +                             num_dma_ranges = 0;
>>                               num_memc = 0;
>> +                     }
>>                       break;
>>               }
>>       }
>> @@ -403,6 +413,35 @@ int encode_ibar_size(u64 size)
>>       return 0;
>>  }
>>
>> +dma_addr_t brcm_to_pci(dma_addr_t addr)
>> +{
>> +     struct of_pci_range *p;
>> +
>> +     if (!num_dma_ranges)
>> +             return addr;
>> +
>> +     for (p = dma_ranges; p < &dma_ranges[num_dma_ranges]; p++)
>> +             if (addr >= p->cpu_addr && addr < (p->cpu_addr + p->size))
>> +                     return addr - p->cpu_addr + p->pci_addr;
>> +
>> +     return BRCMSTB_ERROR_CODE;
>> +}
>> +EXPORT_SYMBOL(brcm_to_pci);
>
> AFAICS it doesn't make much sense for anyone outside this driver to ever
> be calling these.
>
Will fix.

>> +dma_addr_t brcm_to_cpu(dma_addr_t addr)
>> +{
>> +     struct of_pci_range *p;
>> +
>> +     if (!num_dma_ranges)
>> +             return addr;
>> +     for (p = dma_ranges; p < &dma_ranges[num_dma_ranges]; p++)
>> +             if (addr >= p->pci_addr && addr < (p->pci_addr + p->size))
>> +                     return addr - p->pci_addr + p->cpu_addr;
>> +
>> +     return addr;
>> +}
>> +EXPORT_SYMBOL(brcm_to_cpu);
>> +
>>  static u32 mdio_form_pkt(int port, int regad, int cmd)
>>  {
>>       u32 pkt = 0;
>> @@ -652,6 +691,74 @@ static int brcm_parse_ranges(struct brcm_pcie *pcie)
>>       return 0;
>>  }
>>
>> +static int brcm_pci_dma_range_parser_init(struct of_pci_range_parser *parser,
>> +                                       struct device_node *node)
>> +{
>> +     const int na = 3, ns = 2;
>> +     int rlen;
>> +
>> +     parser->node = node;
>> +     parser->pna = of_n_addr_cells(node);
>> +     parser->np = parser->pna + na + ns;
>> +
>> +     parser->range = of_get_property(node, "dma-ranges", &rlen);
>> +     if (!parser->range)
>> +             return -ENOENT;
>> +
>> +     parser->end = parser->range + rlen / sizeof(__be32);
>> +
>> +     return 0;
>> +}
>
> Note that we've got a factored-out helper for this queued in -next
> already - see here:
>
> https://patchwork.kernel.org/patch/9927541/
>
I will submit a change when it gets merged.

>> +
>> +static int brcm_parse_dma_ranges(struct brcm_pcie *pcie)
>> +{
>> +     int i, ret = 0;
>> +     struct of_pci_range_parser parser;
>> +     struct device_node *dn = pcie->dn;
>> +
>> +     mutex_lock(&brcm_pcie_lock);
>> +     if (dma_ranges)
>> +             goto done;
>> +
>> +     /* Parse dma-ranges property if present.  If there are multiple
>> +      * PCI controllers, we only have to parse from one of them since
>> +      * the others will have an identical mapping.
>> +      */
>> +     if (!brcm_pci_dma_range_parser_init(&parser, dn)) {
>> +             unsigned int max_ranges
>> +                     = (parser.end - parser.range) / parser.np;
>> +
>> +             dma_ranges = kcalloc(max_ranges, sizeof(struct of_pci_range),
>> +                                  GFP_KERNEL);
>> +             if (!dma_ranges) {
>> +                     ret =  -ENOMEM;
>> +                     goto done;
>> +             }
>> +             for (i = 0; of_pci_range_parser_one(&parser, dma_ranges + i);
>> +                  i++)
>> +                     num_dma_ranges++;
>> +     }
>> +
>> +     for (i = 0, num_memc = 0; i < BRCM_MAX_SCB; i++) {
>> +             u64 size = brcmstb_memory_memc_size(i);
>> +
>> +             if (size == (u64)-1) {
>> +                     dev_err(pcie->dev, "cannot get memc%d size", i);
>> +                     ret = -EINVAL;
>> +                     goto done;
>> +             } else if (size) {
>> +                     scb_size[i] = roundup_pow_of_two_64(size);
>> +                     num_memc++;
>> +             } else {
>> +                     break;
>> +             }
>> +     }
>> +
>> +done:
>> +     mutex_unlock(&brcm_pcie_lock);
>> +     return ret;
>> +}
>> +
>>  static void set_regulators(struct brcm_pcie *pcie, bool on)
>>  {
>>       struct list_head *pos;
>> @@ -728,10 +835,34 @@ static void brcm_pcie_setup_prep(struct brcm_pcie *pcie)
>>        */
>>       rc_bar2_size = roundup_pow_of_two_64(total_mem_size);
>>
>> -     /* Set simple configuration based on memory sizes
>> -      * only.  We always start the viewport at address 0.
>> -      */
>> -     rc_bar2_offset = 0;
>> +     if (dma_ranges) {
>> +             /* The best-case scenario is to place the inbound
>> +              * region in the first 4GB of pci-space, as some
>> +              * legacy devices can only address 32bits.
>> +              * We would also like to put the MSI under 4GB
>> +              * as well, since some devices require a 32bit
>> +              * MSI target address.
>> +              */
>> +             if (total_mem_size <= 0xc0000000ULL &&
>> +                 rc_bar2_size <= 0x100000000ULL) {
>> +                     rc_bar2_offset = 0;
>> +             } else {
>> +                     /* The system memory is 4GB or larger so we
>> +                      * cannot start the inbound region at location
>> +                      * 0 (since we have to allow some space for
>> +                      * outbound memory @ 3GB).  So instead we
>> +                      * start it at the 1x multiple of its size
>> +                      */
>> +                     rc_bar2_offset = rc_bar2_size;
>> +             }
>> +
>> +     } else {
>> +             /* Set simple configuration based on memory sizes
>> +              * only.  We always start the viewport at address 0,
>> +              * and set the MSI target address accordingly.
>> +              */
>> +             rc_bar2_offset = 0;
>> +     }
>>
>>       tmp = lower_32_bits(rc_bar2_offset);
>>       tmp = INSERT_FIELD(tmp, PCIE_MISC_RC_BAR2_CONFIG_LO, SIZE,
>> @@ -1040,11 +1171,6 @@ static int brcm_pcie_probe(struct platform_device *pdev)
>>               return -EINVAL;
>>       }
>>
>> -     if (of_property_read_u32(dn, "dma-ranges", &tmp) == 0) {
>> -             pr_err("cannot yet handle dma-ranges\n");
>> -             return -EINVAL;
>> -     }
>> -
>>       data = of_id->data;
>>       pcie->reg_offsets = data->offsets;
>>       pcie->reg_field_info = data->reg_field_info;
>> @@ -1113,6 +1239,10 @@ static int brcm_pcie_probe(struct platform_device *pdev)
>>       if (ret)
>>               return ret;
>>
>> +     ret = brcm_parse_dma_ranges(pcie);
>> +     if (ret)
>> +             return ret;
>> +
>>       ret = clk_prepare_enable(pcie->clk);
>>       if (ret) {
>>               dev_err(&pdev->dev, "could not enable clock\n");
>> diff --git a/drivers/pci/host/pci-brcmstb.h b/drivers/pci/host/pci-brcmstb.h
>> index 86f9cd1..4851be8 100644
>> --- a/drivers/pci/host/pci-brcmstb.h
>> +++ b/drivers/pci/host/pci-brcmstb.h
>> @@ -21,6 +21,13 @@
>>  /* Broadcom PCIE Offsets */
>>  #define PCIE_INTR2_CPU_BASE          0x4300
>>
>> +dma_addr_t brcm_to_pci(dma_addr_t addr);
>> +dma_addr_t brcm_to_cpu(dma_addr_t addr);
>> +
>> +extern struct notifier_block brcmstb_platform_nb;
>
> It seems a bit weird to have the notifier code split across two
> compilation units in the way which requires this - it seems more
> reasonable to have it all together on one side or the other, with the
> common interface being either the callback for setting the ops or a
> function for installing the notifier, depending on where things fall.

Okay, I'll try to rework this.

Thanks Robin,
Jim

>
> Robin.
>
>> +
>> +#define BRCMSTB_ERROR_CODE   (~(dma_addr_t)0x0)
>> +
>>  #if defined(CONFIG_MIPS)
>>  /* Broadcom MIPs HW implicitly does the swapping if necessary */
>>  #define bcm_readl(a)         __raw_readl(a)
>>
>


More information about the iommu mailing list