[PATCH v1 0/3] PCIe and AR8151 on APQ8098/MSM8998

[Marc Gonzalez]

[ Trimming recipients list ]

On 11/06/2019 17:55, Lorenzo Pieralisi wrote:

> On Thu, Mar 28, 2019 at 05:59:48PM +0100, Marc Gonzalez wrote:
> 
>> After a lot of poking, I am finally able to use the AR8151 ethernet on the APQ8098 board.
>> The magic bits are the iommu-map prop and the PCIE20_PARF_BDF_TRANSLATE_N setup.
>>
>> The WIP thread is archived here:
>> https://marc.info/?t=155059539200004&r=1&w=2
>>
>>
>> Marc Gonzalez (3):
>>   PCI: qcom: Setup PCIE20_PARF_BDF_TRANSLATE_N
>>   arm64: dts: qcom: msm8998: Add PCIe SMMU node
>>   arm64: dts: qcom: msm8998: Add PCIe PHY and RC nodes
>>
>>  arch/arm64/boot/dts/qcom/msm8998.dtsi  | 93 ++++++++++++++++++++++++++
>>  drivers/pci/controller/dwc/pcie-qcom.c |  4 ++
>>  2 files changed, 97 insertions(+)
> 
> Marc,
> 
> what's the plan with this series ? Please let me know so that
> I can handle it correctly in the PCI patch queue, I am not
> sure by reading comments it has evolved much since posting.

Hello Lorenzo,

You can ignore/drop this series, it has been superseded; FWIW, the latest
patches no longer touch drivers/pci

The hold-up was finding an acceptable work-around for the $&#! bug in qcom's
SMMU emulation code. I hope Joerg will push it ASAP into linux-next so it can
receive some testing before 5.3-rc1.

The current incarnation of the PCIe PHY and RC nodes is:
https://patchwork.kernel.org/patch/10895341/

Regards.