[PATCH 1/2] iommu/dmar: collect fault statistics
Bjorn Helgaas
helgaas at kernel.org
Wed Oct 16 17:16:43 UTC 2019
Hi Yuri,
On Tue, Oct 15, 2019 at 05:11:11PM +0200, Yuri Volchkov wrote:
> Currently dmar_fault handler only prints a message in the dmesg. This
> commit introduces counters - how many faults have happened, and
> exposes them via sysfs. Each pci device will have an entry
> 'dmar_faults' reading from which will give user 3 lines
> remap: xxx
> read: xxx
> write: xxx
I think you should have three files instead of putting all these in a
single file. See https://lore.kernel.org/r/20190621072911.GA21600@kroah.com
They should also be documented in Documentation/ABI/
I'm not sure this should be DMAR-specific. Couldn't we count similar
events for other IOMMUs as well?
> This functionality is targeted for health monitoring daemons.
>
> Signed-off-by: Yuri Volchkov <volchkov at amazon.de>
> ---
> drivers/iommu/dmar.c | 133 +++++++++++++++++++++++++++++++-----
> drivers/pci/pci-sysfs.c | 20 ++++++
> include/linux/intel-iommu.h | 3 +
> include/linux/pci.h | 11 +++
> 4 files changed, 150 insertions(+), 17 deletions(-)
>
> diff --git a/drivers/iommu/dmar.c b/drivers/iommu/dmar.c
> index eecd6a421667..0749873e3e41 100644
> --- a/drivers/iommu/dmar.c
> +++ b/drivers/iommu/dmar.c
> @@ -1107,6 +1107,7 @@ static void free_iommu(struct intel_iommu *iommu)
> }
>
> if (iommu->irq) {
> + destroy_workqueue(iommu->fault_wq);
> if (iommu->pr_irq) {
> free_irq(iommu->pr_irq, iommu);
> dmar_free_hwirq(iommu->pr_irq);
> @@ -1672,9 +1673,46 @@ void dmar_msi_read(int irq, struct msi_msg *msg)
> raw_spin_unlock_irqrestore(&iommu->register_lock, flag);
> }
>
> -static int dmar_fault_do_one(struct intel_iommu *iommu, int type,
> - u8 fault_reason, int pasid, u16 source_id,
> - unsigned long long addr)
> +struct dmar_fault_info {
> + struct work_struct work;
> + struct intel_iommu *iommu;
> + int type;
> + int pasid;
> + u16 source_id;
> + unsigned long long addr;
> + u8 fault_reason;
> +};
> +
> +static struct kmem_cache *dmar_fault_info_cache;
> +int __init dmar_fault_info_cache_init(void)
> +{
> + int ret = 0;
> +
> + dmar_fault_info_cache =
> + kmem_cache_create("dmar_fault_info",
> + sizeof(struct dmar_fault_info), 0,
> + SLAB_HWCACHE_ALIGN, NULL);
> + if (!dmar_fault_info_cache) {
> + pr_err("Couldn't create dmar_fault_info cache\n");
> + ret = -ENOMEM;
> + }
> +
> + return ret;
> +}
> +
> +static inline void *alloc_dmar_fault_info(void)
> +{
> + return kmem_cache_alloc(dmar_fault_info_cache, GFP_ATOMIC);
> +}
> +
> +static inline void free_dmar_fault_info(void *vaddr)
> +{
> + kmem_cache_free(dmar_fault_info_cache, vaddr);
> +}
> +
> +static int dmar_fault_dump_one(struct intel_iommu *iommu, int type,
> + u8 fault_reason, int pasid, u16 source_id,
> + unsigned long long addr)
> {
> const char *reason;
> int fault_type;
> @@ -1695,6 +1733,57 @@ static int dmar_fault_do_one(struct intel_iommu *iommu, int type,
> return 0;
> }
>
> +static int dmar_fault_handle_one(struct dmar_fault_info *info)
> +{
> + struct pci_dev *pdev;
> + u8 devfn;
> + atomic_t *pcnt;
> +
> + devfn = PCI_DEVFN(PCI_SLOT(info->source_id), PCI_FUNC(info->source_id));
> + pdev = pci_get_domain_bus_and_slot(info->iommu->segment,
> + PCI_BUS_NUM(info->source_id), devfn);
I'm sure you've considered this already, but it's not completely clear
to me whether these counters should be in the pci_dev (as in this
patch) or in something IOMMU-related.
The pci_dev is nice because you automatically have counters for each
PCI device, and most faults can be tied back to a device.
But on the other hand, it's not the PCI device actually detecting and
reporting the error. It's the IOMMU reporting the fault, and while
it's *likely* there's a pci_dev corresponding to the
bus/device/function info in the IOMMU error registers, there's no
guarantee: the device may have been hot-removed between reading the
IOMMU registers and doing the pci_get_domain_bus_and_slot(), or (I
suspect) faults could be caused by corrupted or malicious TLPs.
Another possible issue is that if the counts are in the pci_dev,
they're lost if the device is removed, which might happen while
diagnosing faulty hardware.
So I tend to think this is really IOMMU error information and the
IOMMU driver should handle it itself, including logging and exposing
it via sysfs.
> + if (!pdev)
> + return -ENXIO;
> +
> + if (info->fault_reason == INTR_REMAP)
> + pcnt = &pdev->faults_cnt.remap;
> + else if (info->type)
> + pcnt = &pdev->faults_cnt.read;
> + else
> + pcnt = &pdev->faults_cnt.write;
> +
> + atomic_inc(pcnt);
pci_get_domain_bus_and_slot() increments pdev's reference count, so
you would need to release it here.
> + return 0;
> +}
> +
> +static void dmar_fault_handle_work(struct work_struct *work)
> +{
> + struct dmar_fault_info *info;
> +
> + info = container_of(work, struct dmar_fault_info, work);
> +
> + dmar_fault_handle_one(info);
> + free_dmar_fault_info(info);
> +}
> +
> +static int dmar_fault_schedule_one(struct intel_iommu *iommu, int type,
> + u8 fault_reason, int pasid, u16 source_id,
> + unsigned long long addr)
> +{
> + struct dmar_fault_info *info = alloc_dmar_fault_info();
> +
> + INIT_WORK(&info->work, dmar_fault_handle_work);
> + info->iommu = iommu;
> + info->type = type;
> + info->fault_reason = fault_reason;
> + info->pasid = pasid;
> + info->source_id = source_id;
> + info->addr = addr;
> +
> + return queue_work(iommu->fault_wq, &info->work);
> +}
> +
> #define PRIMARY_FAULT_REG_LEN (16)
> irqreturn_t dmar_fault(int irq, void *dev_id)
> {
> @@ -1733,20 +1822,18 @@ irqreturn_t dmar_fault(int irq, void *dev_id)
> if (!(data & DMA_FRCD_F))
> break;
>
> - if (!ratelimited) {
> - fault_reason = dma_frcd_fault_reason(data);
> - type = dma_frcd_type(data);
> + fault_reason = dma_frcd_fault_reason(data);
> + type = dma_frcd_type(data);
>
> - pasid = dma_frcd_pasid_value(data);
> - data = readl(iommu->reg + reg +
> - fault_index * PRIMARY_FAULT_REG_LEN + 8);
> - source_id = dma_frcd_source_id(data);
> + pasid = dma_frcd_pasid_value(data);
> + data = readl(iommu->reg + reg +
> + fault_index * PRIMARY_FAULT_REG_LEN + 8);
> + source_id = dma_frcd_source_id(data);
>
> - pasid_present = dma_frcd_pasid_present(data);
> - guest_addr = dmar_readq(iommu->reg + reg +
> + pasid_present = dma_frcd_pasid_present(data);
> + guest_addr = dmar_readq(iommu->reg + reg +
> fault_index * PRIMARY_FAULT_REG_LEN);
> - guest_addr = dma_frcd_page_addr(guest_addr);
> - }
> + guest_addr = dma_frcd_page_addr(guest_addr);
>
> /* clear the fault */
> writel(DMA_FRCD_F, iommu->reg + reg +
> @@ -1756,9 +1843,13 @@ irqreturn_t dmar_fault(int irq, void *dev_id)
>
> if (!ratelimited)
> /* Using pasid -1 if pasid is not present */
> - dmar_fault_do_one(iommu, type, fault_reason,
> - pasid_present ? pasid : -1,
> - source_id, guest_addr);
> + dmar_fault_dump_one(iommu, type, fault_reason,
> + pasid_present ? pasid : -1,
> + source_id, guest_addr);
> + if (irq != -1)
> + dmar_fault_schedule_one(iommu, type, fault_reason,
> + pasid_present ? pasid : -1,
> + source_id, guest_addr);
>
> fault_index++;
> if (fault_index >= cap_num_fault_regs(iommu->cap))
> @@ -1784,6 +1875,10 @@ int dmar_set_interrupt(struct intel_iommu *iommu)
> if (iommu->irq)
> return 0;
>
> + iommu->fault_wq = alloc_ordered_workqueue("fault_%s", 0, iommu->name);
> + if (!iommu->fault_wq)
> + return -ENOMEM;
> +
> irq = dmar_alloc_hwirq(iommu->seq_id, iommu->node, iommu);
> if (irq > 0) {
> iommu->irq = irq;
> @@ -1803,6 +1898,9 @@ int __init enable_drhd_fault_handling(void)
> struct dmar_drhd_unit *drhd;
> struct intel_iommu *iommu;
>
> + if (dmar_fault_info_cache_init())
> + return -1;
> +
> /*
> * Enable fault control interrupt.
> */
> @@ -1813,6 +1911,7 @@ int __init enable_drhd_fault_handling(void)
> if (ret) {
> pr_err("DRHD %Lx: failed to enable fault, interrupt, ret %d\n",
> (unsigned long long)drhd->reg_base_addr, ret);
> + kmem_cache_destroy(dmar_fault_info_cache);
> return -1;
> }
>
> diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c
> index 07bd84c50238..d01514fca6d1 100644
> --- a/drivers/pci/pci-sysfs.c
> +++ b/drivers/pci/pci-sysfs.c
> @@ -263,6 +263,23 @@ static ssize_t ari_enabled_show(struct device *dev,
> }
> static DEVICE_ATTR_RO(ari_enabled);
>
> +#ifdef CONFIG_DMAR_TABLE
> +static ssize_t dmar_faults_show(struct device *dev,
> + struct device_attribute *attr, char *buf)
> +{
> + struct pci_dev *pdev = to_pci_dev(dev);
> + int remap, read, write;
> +
> + remap = atomic_xchg(&pdev->faults_cnt.remap, 0);
> + read = atomic_xchg(&pdev->faults_cnt.read, 0);
> + write = atomic_xchg(&pdev->faults_cnt.write, 0);
Doesn't this clear-on-read approach allow anybody to clear these
counters? This looks like it's world-readable, and I'm not sure an
unprivileged user should be able to clear the counters.
> +
> + return sprintf(buf, "remap: %d\nread: %d\nwrite: %d\n", remap, read,
> + write);
> +}
> +static DEVICE_ATTR_RO(dmar_faults);
> +#endif
> +
> static ssize_t modalias_show(struct device *dev, struct device_attribute *attr,
> char *buf)
> {
> @@ -623,6 +640,9 @@ static struct attribute *pci_dev_attrs[] = {
> #endif
> &dev_attr_driver_override.attr,
> &dev_attr_ari_enabled.attr,
> +#ifdef CONFIG_DMAR_TABLE
> + &dev_attr_dmar_faults.attr,
> +#endif
> NULL,
> };
>
> diff --git a/include/linux/intel-iommu.h b/include/linux/intel-iommu.h
> index ed11ef594378..f8963c833fb0 100644
> --- a/include/linux/intel-iommu.h
> +++ b/include/linux/intel-iommu.h
> @@ -552,6 +552,9 @@ struct intel_iommu {
> struct iommu_device iommu; /* IOMMU core code handle */
> int node;
> u32 flags; /* Software defined flags */
> +#ifdef CONFIG_DMAR_TABLE
> + struct workqueue_struct *fault_wq; /* Fault handler */
> +#endif
> };
>
> /* PCI domain-device relationship */
> diff --git a/include/linux/pci.h b/include/linux/pci.h
> index 14efa2586a8c..d9cc94fbf0ee 100644
> --- a/include/linux/pci.h
> +++ b/include/linux/pci.h
> @@ -286,6 +286,14 @@ struct pci_vpd;
> struct pci_sriov;
> struct pci_p2pdma;
>
> +#ifdef CONFIG_DMAR_TABLE
> +struct pci_dmar_faults_cnt {
> + atomic_t read; /* How many read faults occurred */
> + atomic_t write; /* How many write faults occurred */
> + atomic_t remap; /* How many remap faults occurred */
> +};
> +#endif
> +
> /* The pci_dev structure describes PCI devices */
> struct pci_dev {
> struct list_head bus_list; /* Node in per-bus list */
> @@ -468,6 +476,9 @@ struct pci_dev {
> char *driver_override; /* Driver name to force a match */
>
> unsigned long priv_flags; /* Private flags for the PCI driver */
> +#ifdef CONFIG_DMAR_TABLE
> + struct pci_dmar_faults_cnt faults_cnt; /* Dmar fault statistics */
> +#endif
> };
>
> static inline struct pci_dev *pci_physfn(struct pci_dev *dev)
> --
> 2.23.0
>
>
>
>
> Amazon Development Center Germany GmbH
> Krausenstr. 38
> 10117 Berlin
> Geschaeftsfuehrung: Christian Schlaeger, Ralf Herbrich
> Eingetragen am Amtsgericht Charlottenburg unter HRB 149173 B
> Sitz: Berlin
> Ust-ID: DE 289 237 879
>
>
>
More information about the iommu
mailing list