[PATCH v3 4/7] iommu/mediatek: Move inv_sel_reg into the plat_data

Chao Hao chao.hao at mediatek.com
Sat May 9 08:36:51 UTC 2020


For mt6779, MMU_INVLDT_SEL register's offset is changed from
0x38 to 0x2c, so we can put inv_sel_reg in the plat_data to
use it.
In addition, we renamed it to REG_MMU_INV_SEL_GEN1 and use it
before mt6779.

Signed-off-by: Chao Hao <chao.hao at mediatek.com>
---
 drivers/iommu/mtk_iommu.c | 9 ++++++---
 drivers/iommu/mtk_iommu.h | 1 +
 2 files changed, 7 insertions(+), 3 deletions(-)

diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
index 9ede327a418d..d73de987f8be 100644
--- a/drivers/iommu/mtk_iommu.c
+++ b/drivers/iommu/mtk_iommu.c
@@ -37,7 +37,7 @@
 #define REG_MMU_INVLD_START_A			0x024
 #define REG_MMU_INVLD_END_A			0x028
 
-#define REG_MMU_INV_SEL				0x038
+#define REG_MMU_INV_SEL_GEN1			0x038
 #define F_INVLD_EN0				BIT(0)
 #define F_INVLD_EN1				BIT(1)
 
@@ -167,7 +167,7 @@ static void mtk_iommu_tlb_flush_all(void *cookie)
 
 	for_each_m4u(data) {
 		writel_relaxed(F_INVLD_EN1 | F_INVLD_EN0,
-			       data->base + REG_MMU_INV_SEL);
+			       data->base + data->plat_data->inv_sel_reg);
 		writel_relaxed(F_ALL_INVLD, data->base + REG_MMU_INVALIDATE);
 		wmb(); /* Make sure the tlb flush all done */
 	}
@@ -184,7 +184,7 @@ static void mtk_iommu_tlb_flush_range_sync(unsigned long iova, size_t size,
 	for_each_m4u(data) {
 		spin_lock_irqsave(&data->tlb_lock, flags);
 		writel_relaxed(F_INVLD_EN1 | F_INVLD_EN0,
-			       data->base + REG_MMU_INV_SEL);
+			       data->base + data->plat_data->inv_sel_reg);
 
 		writel_relaxed(iova, data->base + REG_MMU_INVLD_START_A);
 		writel_relaxed(iova + size - 1,
@@ -784,6 +784,7 @@ static const struct mtk_iommu_plat_data mt2712_data = {
 	.has_4gb_mode = true,
 	.has_bclk     = true,
 	.has_vld_pa_rng   = true,
+	.inv_sel_reg = REG_MMU_INV_SEL_GEN1,
 	.larbid_remap = {0, 1, 2, 3, 4, 5, 6, 7, 8, 9},
 };
 
@@ -792,12 +793,14 @@ static const struct mtk_iommu_plat_data mt8173_data = {
 	.has_4gb_mode = true,
 	.has_bclk     = true,
 	.reset_axi    = true,
+	.inv_sel_reg = REG_MMU_INV_SEL_GEN1,
 	.larbid_remap = {0, 1, 2, 3, 4, 5}, /* Linear mapping. */
 };
 
 static const struct mtk_iommu_plat_data mt8183_data = {
 	.m4u_plat     = M4U_MT8183,
 	.reset_axi    = true,
+	.inv_sel_reg = REG_MMU_INV_SEL_GEN1,
 	.larbid_remap = {0, 4, 5, 6, 7, 2, 3, 1},
 };
 
diff --git a/drivers/iommu/mtk_iommu.h b/drivers/iommu/mtk_iommu.h
index d711ac630037..afd7a2de5c1e 100644
--- a/drivers/iommu/mtk_iommu.h
+++ b/drivers/iommu/mtk_iommu.h
@@ -43,6 +43,7 @@ struct mtk_iommu_plat_data {
 	bool		    has_misc_ctrl;
 	bool                has_vld_pa_rng;
 	bool                reset_axi;
+	u32                 inv_sel_reg;
 	unsigned char       larbid_remap[MTK_LARB_NR_MAX];
 };
 
-- 
2.18.0


More information about the iommu mailing list