[PATCH v4 38/38] videobuf2: use sgtable-based scatterlist wrappers
Ruhl, Michael J
michael.j.ruhl at intel.com
Tue May 12 17:52:39 UTC 2020
>-----Original Message-----
>From: dri-devel <dri-devel-bounces at lists.freedesktop.org> On Behalf Of
>Marek Szyprowski
>Sent: Tuesday, May 12, 2020 5:01 AM
>To: dri-devel at lists.freedesktop.org; iommu at lists.linux-foundation.org;
>linaro-mm-sig at lists.linaro.org; linux-kernel at vger.kernel.org
>Cc: Pawel Osciak <pawel at osciak.com>; Bartlomiej Zolnierkiewicz
><b.zolnierkie at samsung.com>; David Airlie <airlied at linux.ie>; linux-
>media at vger.kernel.org; Hans Verkuil <hverkuil-cisco at xs4all.nl>; Mauro
>Carvalho Chehab <mchehab at kernel.org>; Robin Murphy
><robin.murphy at arm.com>; Christoph Hellwig <hch at lst.de>; linux-arm-
>kernel at lists.infradead.org; Marek Szyprowski
><m.szyprowski at samsung.com>
>Subject: [PATCH v4 38/38] videobuf2: use sgtable-based scatterlist wrappers
>
>Use recently introduced common wrappers operating directly on the struct
>sg_table objects and scatterlist page iterators to make the code a bit
>more compact, robust, easier to follow and copy/paste safe.
>
>No functional change, because the code already properly did all the
>scaterlist related calls.
>
>Signed-off-by: Marek Szyprowski <m.szyprowski at samsung.com>
>---
>For more information, see '[PATCH v4 00/38] DRM: fix struct sg_table nents
>vs. orig_nents misuse' thread:
>https://lore.kernel.org/dri-devel/20200512085710.14688-1-
>m.szyprowski at samsung.com/T/
>---
> .../media/common/videobuf2/videobuf2-dma-contig.c | 41 ++++++++++----
>--------
> drivers/media/common/videobuf2/videobuf2-dma-sg.c | 32 +++++++--------
>--
> drivers/media/common/videobuf2/videobuf2-vmalloc.c | 12 +++----
> 3 files changed, 34 insertions(+), 51 deletions(-)
>
>diff --git a/drivers/media/common/videobuf2/videobuf2-dma-contig.c
>b/drivers/media/common/videobuf2/videobuf2-dma-contig.c
>index d3a3ee5..bf31a9d 100644
>--- a/drivers/media/common/videobuf2/videobuf2-dma-contig.c
>+++ b/drivers/media/common/videobuf2/videobuf2-dma-contig.c
>@@ -48,16 +48,15 @@ struct vb2_dc_buf {
>
> static unsigned long vb2_dc_get_contiguous_size(struct sg_table *sgt)
> {
>- struct scatterlist *s;
> dma_addr_t expected = sg_dma_address(sgt->sgl);
>- unsigned int i;
>+ struct sg_dma_page_iter dma_iter;
> unsigned long size = 0;
>
>- for_each_sg(sgt->sgl, s, sgt->nents, i) {
>- if (sg_dma_address(s) != expected)
>+ for_each_sgtable_dma_page(sgt, &dma_iter, 0) {
>+ if (sg_page_iter_dma_address(&dma_iter) != expected)
> break;
>- expected = sg_dma_address(s) + sg_dma_len(s);
>- size += sg_dma_len(s);
>+ expected += PAGE_SIZE;
>+ size += PAGE_SIZE;
This code in drm_prime_t_contiguous_size and here. I seem to remember seeing
the same pattern in other drivers.
Would it worthwhile to make this a helper as well?
Also, isn't the sg_dma_len() the actual length of the chunk we are looking at?
If its I not PAGE_SIZE (ie. dma chunk is 4 * PAGE_SIZE?), does your loop/calculation still work?
Thanks,
Mike
> }
> return size;
> }
>@@ -99,8 +98,7 @@ static void vb2_dc_prepare(void *buf_priv)
> if (!sgt || buf->db_attach)
> return;
>
>- dma_sync_sg_for_device(buf->dev, sgt->sgl, sgt->orig_nents,
>- buf->dma_dir);
>+ dma_sync_sgtable_for_device(buf->dev, sgt, buf->dma_dir);
> }
>
> static void vb2_dc_finish(void *buf_priv)
>@@ -112,7 +110,7 @@ static void vb2_dc_finish(void *buf_priv)
> if (!sgt || buf->db_attach)
> return;
>
>- dma_sync_sg_for_cpu(buf->dev, sgt->sgl, sgt->orig_nents, buf-
>>dma_dir);
>+ dma_sync_sgtable_for_cpu(buf->dev, sgt, buf->dma_dir);
> }
>
> /*********************************************/
>@@ -273,8 +271,8 @@ static void vb2_dc_dmabuf_ops_detach(struct
>dma_buf *dbuf,
> * memory locations do not require any explicit cache
> * maintenance prior or after being used by the device.
> */
>- dma_unmap_sg_attrs(db_attach->dev, sgt->sgl, sgt-
>>orig_nents,
>- attach->dma_dir,
>DMA_ATTR_SKIP_CPU_SYNC);
>+ dma_unmap_sgtable(db_attach->dev, sgt, attach->dma_dir,
>+ DMA_ATTR_SKIP_CPU_SYNC);
> sg_free_table(sgt);
> kfree(attach);
> db_attach->priv = NULL;
>@@ -299,8 +297,8 @@ static struct sg_table *vb2_dc_dmabuf_ops_map(
>
> /* release any previous cache */
> if (attach->dma_dir != DMA_NONE) {
>- dma_unmap_sg_attrs(db_attach->dev, sgt->sgl, sgt-
>>orig_nents,
>- attach->dma_dir,
>DMA_ATTR_SKIP_CPU_SYNC);
>+ dma_unmap_sgtable(db_attach->dev, sgt, attach->dma_dir,
>+ DMA_ATTR_SKIP_CPU_SYNC);
> attach->dma_dir = DMA_NONE;
> }
>
>@@ -308,9 +306,8 @@ static struct sg_table *vb2_dc_dmabuf_ops_map(
> * mapping to the client with new direction, no cache sync
> * required see comment in vb2_dc_dmabuf_ops_detach()
> */
>- sgt->nents = dma_map_sg_attrs(db_attach->dev, sgt->sgl, sgt-
>>orig_nents,
>- dma_dir, DMA_ATTR_SKIP_CPU_SYNC);
>- if (!sgt->nents) {
>+ if (dma_map_sgtable(db_attach->dev, sgt, dma_dir,
>+ DMA_ATTR_SKIP_CPU_SYNC)) {
> pr_err("failed to map scatterlist\n");
> mutex_unlock(lock);
> return ERR_PTR(-EIO);
>@@ -423,8 +420,8 @@ static void vb2_dc_put_userptr(void *buf_priv)
> * No need to sync to CPU, it's already synced to the CPU
> * since the finish() memop will have been called before this.
> */
>- dma_unmap_sg_attrs(buf->dev, sgt->sgl, sgt->orig_nents,
>- buf->dma_dir,
>DMA_ATTR_SKIP_CPU_SYNC);
>+ dma_unmap_sgtable(buf->dev, sgt, buf->dma_dir,
>+ DMA_ATTR_SKIP_CPU_SYNC);
> pages = frame_vector_pages(buf->vec);
> /* sgt should exist only if vector contains pages... */
> BUG_ON(IS_ERR(pages));
>@@ -521,9 +518,8 @@ static void *vb2_dc_get_userptr(struct device *dev,
>unsigned long vaddr,
> * No need to sync to the device, this will happen later when the
> * prepare() memop is called.
> */
>- sgt->nents = dma_map_sg_attrs(buf->dev, sgt->sgl, sgt->orig_nents,
>- buf->dma_dir,
>DMA_ATTR_SKIP_CPU_SYNC);
>- if (sgt->nents <= 0) {
>+ if (dma_map_sgtable(buf->dev, sgt, buf->dma_dir,
>+ DMA_ATTR_SKIP_CPU_SYNC)) {
> pr_err("failed to map scatterlist\n");
> ret = -EIO;
> goto fail_sgt_init;
>@@ -545,8 +541,7 @@ static void *vb2_dc_get_userptr(struct device *dev,
>unsigned long vaddr,
> return buf;
>
> fail_map_sg:
>- dma_unmap_sg_attrs(buf->dev, sgt->sgl, sgt->orig_nents,
>- buf->dma_dir, DMA_ATTR_SKIP_CPU_SYNC);
>+ dma_unmap_sgtable(buf->dev, sgt, buf->dma_dir,
>DMA_ATTR_SKIP_CPU_SYNC);
>
> fail_sgt_init:
> sg_free_table(sgt);
>diff --git a/drivers/media/common/videobuf2/videobuf2-dma-sg.c
>b/drivers/media/common/videobuf2/videobuf2-dma-sg.c
>index 92072a0..6ddf953 100644
>--- a/drivers/media/common/videobuf2/videobuf2-dma-sg.c
>+++ b/drivers/media/common/videobuf2/videobuf2-dma-sg.c
>@@ -142,9 +142,8 @@ static void *vb2_dma_sg_alloc(struct device *dev,
>unsigned long dma_attrs,
> * No need to sync to the device, this will happen later when the
> * prepare() memop is called.
> */
>- sgt->nents = dma_map_sg_attrs(buf->dev, sgt->sgl, sgt->orig_nents,
>- buf->dma_dir,
>DMA_ATTR_SKIP_CPU_SYNC);
>- if (!sgt->nents)
>+ if (dma_map_sgtable(buf->dev, sgt, buf->dma_dir,
>+ DMA_ATTR_SKIP_CPU_SYNC)) {
> goto fail_map;
>
> buf->handler.refcount = &buf->refcount;
>@@ -180,8 +179,8 @@ static void vb2_dma_sg_put(void *buf_priv)
> if (refcount_dec_and_test(&buf->refcount)) {
> dprintk(1, "%s: Freeing buffer of %d pages\n", __func__,
> buf->num_pages);
>- dma_unmap_sg_attrs(buf->dev, sgt->sgl, sgt->orig_nents,
>- buf->dma_dir,
>DMA_ATTR_SKIP_CPU_SYNC);
>+ dma_unmap_sgtable(buf->dev, sgt, buf->dma_dir,
>+ DMA_ATTR_SKIP_CPU_SYNC);
> if (buf->vaddr)
> vm_unmap_ram(buf->vaddr, buf->num_pages);
> sg_free_table(buf->dma_sgt);
>@@ -202,8 +201,7 @@ static void vb2_dma_sg_prepare(void *buf_priv)
> if (buf->db_attach)
> return;
>
>- dma_sync_sg_for_device(buf->dev, sgt->sgl, sgt->orig_nents,
>- buf->dma_dir);
>+ dma_sync_sgtable_for_device(buf->dev, sgt, buf->dma_dir);
> }
>
> static void vb2_dma_sg_finish(void *buf_priv)
>@@ -215,7 +213,7 @@ static void vb2_dma_sg_finish(void *buf_priv)
> if (buf->db_attach)
> return;
>
>- dma_sync_sg_for_cpu(buf->dev, sgt->sgl, sgt->orig_nents, buf-
>>dma_dir);
>+ dma_sync_sgtable_for_cpu(buf->dev, sgt, buf->dma_dir);
> }
>
> static void *vb2_dma_sg_get_userptr(struct device *dev, unsigned long
>vaddr,
>@@ -258,9 +256,8 @@ static void *vb2_dma_sg_get_userptr(struct device
>*dev, unsigned long vaddr,
> * No need to sync to the device, this will happen later when the
> * prepare() memop is called.
> */
>- sgt->nents = dma_map_sg_attrs(buf->dev, sgt->sgl, sgt->orig_nents,
>- buf->dma_dir,
>DMA_ATTR_SKIP_CPU_SYNC);
>- if (!sgt->nents)
>+ if (dma_map_sgtable(buf->dev, sgt, buf->dma_dir,
>+ DMA_ATTR_SKIP_CPU_SYNC)) {
> goto userptr_fail_map;
>
> return buf;
>@@ -286,8 +283,7 @@ static void vb2_dma_sg_put_userptr(void *buf_priv)
>
> dprintk(1, "%s: Releasing userspace buffer of %d pages\n",
> __func__, buf->num_pages);
>- dma_unmap_sg_attrs(buf->dev, sgt->sgl, sgt->orig_nents, buf-
>>dma_dir,
>- DMA_ATTR_SKIP_CPU_SYNC);
>+ dma_unmap_sgtable(buf->dev, sgt, buf->dma_dir,
>DMA_ATTR_SKIP_CPU_SYNC);
> if (buf->vaddr)
> vm_unmap_ram(buf->vaddr, buf->num_pages);
> sg_free_table(buf->dma_sgt);
>@@ -410,8 +406,7 @@ static void vb2_dma_sg_dmabuf_ops_detach(struct
>dma_buf *dbuf,
>
> /* release the scatterlist cache */
> if (attach->dma_dir != DMA_NONE)
>- dma_unmap_sg(db_attach->dev, sgt->sgl, sgt->orig_nents,
>- attach->dma_dir);
>+ dma_unmap_sgtable(db_attach->dev, sgt, attach->dma_dir);
> sg_free_table(sgt);
> kfree(attach);
> db_attach->priv = NULL;
>@@ -436,15 +431,12 @@ static struct sg_table
>*vb2_dma_sg_dmabuf_ops_map(
>
> /* release any previous cache */
> if (attach->dma_dir != DMA_NONE) {
>- dma_unmap_sg(db_attach->dev, sgt->sgl, sgt->orig_nents,
>- attach->dma_dir);
>+ dma_unmap_sgtable(db_attach->dev, sgt, attach->dma_dir);
> attach->dma_dir = DMA_NONE;
> }
>
> /* mapping to the client with new direction */
>- sgt->nents = dma_map_sg(db_attach->dev, sgt->sgl, sgt->orig_nents,
>- dma_dir);
>- if (!sgt->nents) {
>+ if (dma_map_sgtable(db_attach->dev, sgt, dma_dir, 0)) {
> pr_err("failed to map scatterlist\n");
> mutex_unlock(lock);
> return ERR_PTR(-EIO);
>diff --git a/drivers/media/common/videobuf2/videobuf2-vmalloc.c
>b/drivers/media/common/videobuf2/videobuf2-vmalloc.c
>index c66fda4..bf5ac63 100644
>--- a/drivers/media/common/videobuf2/videobuf2-vmalloc.c
>+++ b/drivers/media/common/videobuf2/videobuf2-vmalloc.c
>@@ -229,7 +229,7 @@ static int vb2_vmalloc_dmabuf_ops_attach(struct
>dma_buf *dbuf,
> kfree(attach);
> return ret;
> }
>- for_each_sg(sgt->sgl, sg, sgt->nents, i) {
>+ for_each_sgtable_sg(sgt, sg, i) {
> struct page *page = vmalloc_to_page(vaddr);
>
> if (!page) {
>@@ -259,8 +259,7 @@ static void vb2_vmalloc_dmabuf_ops_detach(struct
>dma_buf *dbuf,
>
> /* release the scatterlist cache */
> if (attach->dma_dir != DMA_NONE)
>- dma_unmap_sg(db_attach->dev, sgt->sgl, sgt->orig_nents,
>- attach->dma_dir);
>+ dma_unmap_sgtable(db_attach->dev, sgt, attach->dma_dir,
>0);
> sg_free_table(sgt);
> kfree(attach);
> db_attach->priv = NULL;
>@@ -285,15 +284,12 @@ static struct sg_table
>*vb2_vmalloc_dmabuf_ops_map(
>
> /* release any previous cache */
> if (attach->dma_dir != DMA_NONE) {
>- dma_unmap_sg(db_attach->dev, sgt->sgl, sgt->orig_nents,
>- attach->dma_dir);
>+ dma_unmap_sgtable(db_attach->dev, sgt, attach->dma_dir,
>0);
> attach->dma_dir = DMA_NONE;
> }
>
> /* mapping to the client with new direction */
>- sgt->nents = dma_map_sg(db_attach->dev, sgt->sgl, sgt->orig_nents,
>- dma_dir);
>- if (!sgt->nents) {
>+ if (dma_map_sgtable(db_attach->dev, sgt, dma_dir, 0)) {
> pr_err("failed to map scatterlist\n");
> mutex_unlock(lock);
> return ERR_PTR(-EIO);
>--
>1.9.1
>
>_______________________________________________
>dri-devel mailing list
>dri-devel at lists.freedesktop.org
>https://lists.freedesktop.org/mailman/listinfo/dri-devel
More information about the iommu
mailing list