[Ksummit-discuss] [PATCH v2 1/2] docs-rst: move the rules for svg and graphviz to Makefile.sphinx

Mauro Carvalho Chehab mchehab at s-opensource.com
Mon Nov 21 19:27:03 UTC 2016


Not only media documents may have images. So, move the
rules for building images from graphviz and from SVG to
the Documentation makefile.

With this change, if some Documentation subdir "foo"
can now specify that he has SVG and/or DOT source images
that are included inside the documentation.

All it is needed is to create a Documentation/foo/Makefile with:

	DOTS += foo/bar.dot
	IMAGES += foo/foobar.svg

and, at Makefile.sphinx, add a:

	include foo/Makefile

The build system will generate the SVG image "bar.svg" from
the graphviz "bar.dot" document for all documentation targets.

If the documentation target is latexdocs or pdfdocs, it will
also produce a "bar.pdf" image from "bar.svg", and a "foobar.pdf"
from a SVG source image called "foobar.svg".

Signed-off-by: Mauro Carvalho Chehab <mchehab at s-opensource.com>
---
 Documentation/Makefile.sphinx | 41 ++++++++++++++++-----
 Documentation/media/Makefile  | 83 ++++++++++++++++---------------------------
 2 files changed, 63 insertions(+), 61 deletions(-)

diff --git a/Documentation/Makefile.sphinx b/Documentation/Makefile.sphinx
index 707c65337ebf..adc24ffa4c6a 100644
--- a/Documentation/Makefile.sphinx
+++ b/Documentation/Makefile.sphinx
@@ -2,6 +2,8 @@
 # Makefile for Sphinx documentation
 #
 
+include Documentation/media/Makefile
+
 # You can set these variables from the command line.
 SPHINXBUILD   = sphinx-build
 SPHINXOPTS    =
@@ -13,6 +15,29 @@ BUILDDIR      = $(obj)/output
 PDFLATEX      = xelatex
 LATEXOPTS     = -interaction=batchmode
 
+# Handle SVG and graphviz images
+
+DOTTGT := $(patsubst %.dot,%.svg,$(DOTS))
+IMGDOT := $(patsubst %,$(srctree)/Documentation/%,$(DOTTGT))
+
+IMGTGT := $(patsubst %.svg,%.pdf,$(IMAGES))
+IMGPDF := $(patsubst %,$(srctree)/Documentation/%,$(IMGTGT))
+
+cmd = $(echo-cmd) $(cmd_$(1))
+
+quiet_cmd_genpdf = GENPDF  $2
+      cmd_genpdf = convert $2 $3
+
+quiet_cmd_gendot = DOT     $2
+      cmd_gendot = dot -Tsvg $2 > $3
+
+%.pdf: %.svg
+	@$(call cmd,genpdf,$<,$@)
+
+%.svg: %.dot
+	@$(call cmd,gendot,$<,$@)
+
+
 # User-friendly check for sphinx-build
 HAVE_SPHINX := $(shell if which $(SPHINXBUILD) >/dev/null 2>&1; then echo 1; else echo 0; fi)
 
@@ -54,7 +79,7 @@ loop_cmd = $(echo-cmd) $(cmd_$(1))
 #    e.g. "media" for the linux-tv book-set at ./Documentation/media
 
 quiet_cmd_sphinx = SPHINX  $@ --> file://$(abspath $(BUILDDIR)/$3/$4)
-      cmd_sphinx = $(MAKE) BUILDDIR=$(abspath $(BUILDDIR)) $(build)=Documentation/media $2;\
+      cmd_sphinx = $(MAKE) BUILDDIR=$(abspath $(BUILDDIR)) $(build)=Documentation/media mediaheaders;\
 	BUILDDIR=$(abspath $(BUILDDIR)) SPHINX_CONF=$(abspath $(srctree)/$(src)/$5/$(SPHINX_CONF)) \
 	$(SPHINXBUILD) \
 	-b $2 \
@@ -65,10 +90,10 @@ quiet_cmd_sphinx = SPHINX  $@ --> file://$(abspath $(BUILDDIR)/$3/$4)
 	$(abspath $(srctree)/$(src)/$5) \
 	$(abspath $(BUILDDIR)/$3/$4);
 
-htmldocs:
+htmldocs: $(IMGDOT)
 	@$(foreach var,$(SPHINXDIRS),$(call loop_cmd,sphinx,html,$(var),,$(var)))
 
-latexdocs:
+latexdocs: $(IMGPDF)
 	@$(foreach var,$(SPHINXDIRS),$(call loop_cmd,sphinx,latex,$(var),latex,$(var)))
 
 ifeq ($(HAVE_PDFLATEX),0)
@@ -79,15 +104,15 @@ pdfdocs:
 
 else # HAVE_PDFLATEX
 
-pdfdocs: latexdocs
+pdfdocs: latexdocs $(IMGPDF)
 	$(foreach var,$(SPHINXDIRS), $(MAKE) PDFLATEX=$(PDFLATEX) LATEXOPTS="$(LATEXOPTS)" -C $(BUILDDIR)/$(var)/latex;)
 
 endif # HAVE_PDFLATEX
 
-epubdocs:
+epubdocs: $(IMGDOT)
 	@$(foreach var,$(SPHINXDIRS),$(call loop_cmd,sphinx,epub,$(var),epub,$(var)))
 
-xmldocs:
+xmldocs: $(IMGDOT)
 	@$(foreach var,$(SPHINXDIRS),$(call loop_cmd,sphinx,xml,$(var),xml,$(var)))
 
 # no-ops for the Sphinx toolchain
@@ -97,8 +122,8 @@ mandocs:
 installmandocs:
 
 cleandocs:
-	$(Q)rm -rf $(BUILDDIR)
-	$(Q)$(MAKE) BUILDDIR=$(abspath $(BUILDDIR)) -C Documentation/media clean
+	$(Q)rm -rf $(BUILDDIR) $(IMGDOT) $(IMGPDF)
+	$(Q)$(MAKE) BUILDDIR=$(abspath $(BUILDDIR)) -C Documentation/media mediacleandocs
 
 endif # HAVE_SPHINX
 
diff --git a/Documentation/media/Makefile b/Documentation/media/Makefile
index 4d8e2ff378c4..b27c202beefb 100644
--- a/Documentation/media/Makefile
+++ b/Documentation/media/Makefile
@@ -1,54 +1,35 @@
 # Rules to convert DOT and SVG to Sphinx images
 
-SRC_DIR=$(srctree)/Documentation/media
-
-DOTS = \
-	uapi/v4l/pipeline.dot \
-
-IMAGES = \
-	typical_media_device.svg \
-	uapi/dvb/dvbstb.svg \
-	uapi/v4l/bayer.svg \
-	uapi/v4l/constraints.svg \
-	uapi/v4l/crop.svg \
-	uapi/v4l/fieldseq_bt.svg \
-	uapi/v4l/fieldseq_tb.svg \
-	uapi/v4l/nv12mt.svg \
-	uapi/v4l/nv12mt_example.svg \
-	uapi/v4l/pipeline.svg \
-	uapi/v4l/selection.svg \
-	uapi/v4l/subdev-image-processing-full.svg \
-	uapi/v4l/subdev-image-processing-scaling-multi-source.svg \
-	uapi/v4l/subdev-image-processing-crop.svg \
-	uapi/v4l/vbi_525.svg \
-	uapi/v4l/vbi_625.svg \
-	uapi/v4l/vbi_hsync.svg \
-
-DOTTGT := $(patsubst %.dot,%.svg,$(DOTS))
-IMGDOT := $(patsubst %,$(SRC_DIR)/%,$(DOTTGT))
-
-IMGTGT := $(patsubst %.svg,%.pdf,$(IMAGES))
-IMGPDF := $(patsubst %,$(SRC_DIR)/%,$(IMGTGT))
-
-cmd = $(echo-cmd) $(cmd_$(1))
-
-quiet_cmd_genpdf = GENPDF  $2
-      cmd_genpdf = convert $2 $3
-
-quiet_cmd_gendot = DOT     $2
-      cmd_gendot = dot -Tsvg $2 > $3
-
-%.pdf: %.svg
-	@$(call cmd,genpdf,$<,$@)
-
-%.svg: %.dot
-	@$(call cmd,gendot,$<,$@)
+UAPI_V4L = media/uapi/v4l
+
+DOTS += \
+	$(UAPI_V4L)/pipeline.dot \
+
+IMAGES += \
+	media/typical_media_device.svg \
+	media/uapi/dvb/dvbstb.svg \
+	$(UAPI_V4L)/bayer.svg \
+	$(UAPI_V4L)/constraints.svg \
+	$(UAPI_V4L)/crop.svg \
+	$(UAPI_V4L)/fieldseq_bt.svg \
+	$(UAPI_V4L)/fieldseq_tb.svg \
+	$(UAPI_V4L)/nv12mt.svg \
+	$(UAPI_V4L)/nv12mt_example.svg \
+	$(UAPI_V4L)/pipeline.svg \
+	$(UAPI_V4L)/selection.svg \
+	$(UAPI_V4L)/subdev-image-processing-full.svg \
+	$(UAPI_V4L)/subdev-image-processing-scaling-multi-source.svg \
+	$(UAPI_V4L)/subdev-image-processing-crop.svg \
+	$(UAPI_V4L)/vbi_525.svg \
+	$(UAPI_V4L)/vbi_625.svg \
+	$(UAPI_V4L)/vbi_hsync.svg \
 
 # Rules to convert a .h file to inline RST documentation
 
 PARSER = $(srctree)/Documentation/sphinx/parse-headers.pl
-UAPI = $(srctree)/include/uapi/linux
-KAPI = $(srctree)/include/linux
+SRC_DIR= $(srctree)/Documentation/media
+UAPI   = $(srctree)/include/uapi/linux
+KAPI   = $(srctree)/include/linux
 
 FILES = audio.h.rst ca.h.rst dmx.h.rst frontend.h.rst net.h.rst video.h.rst \
 	  videodev2.h.rst media.h.rst cec.h.rst lirc.h.rst
@@ -96,16 +77,12 @@ $(BUILDDIR)/lirc.h.rst: ${UAPI}/lirc.h ${PARSER} $(SRC_DIR)/lirc.h.rst.exception
 
 # Media build rules
 
-.PHONY: all html epub xml latex
+.PHONY: mediaheaders
 
-all: $(IMGDOT) $(BUILDDIR) ${TARGETS}
-html: all
-epub: all
-xml: all
-latex: $(IMGPDF) all
+mediaheaders: $(IMGDOT) $(BUILDDIR) ${TARGETS}
 
-clean:
-	-rm -f $(DOTTGT) $(IMGTGT) ${TARGETS} 2>/dev/null
+mediacleandocs:
+	$(Q)rm -f ${TARGETS} 2>/dev/null
 
 $(BUILDDIR):
 	$(Q)mkdir -p $@
-- 
2.9.3




More information about the Ksummit-discuss mailing list