[Linux-kernel-mentees] [Patch V2] Documentation: coresight: covert txt to rst

Mauro Carvalho Chehab mchehab+samsung at kernel.org
Tue Jul 9 17:04:06 UTC 2019


Em Tue,  9 Jul 2019 23:41:58 +0700
Phong Tran <tranmanphong at gmail.com> escreveu:

> as doc-guide of kernel documentation, use Sphinx tool to
> generate the html/pdf... files.
> 
> This changes the plan text txt to rst format.
> 
> Signed-off-by: Phong Tran <tranmanphong at gmail.com>
> ---
> ChangeLog:
> V2:
>   * Add coresight-cpu-debug
>   * Update MAINTAINERS file
>   * Avoid use markup as much as posible
> ---
>  ...sight-cpu-debug.txt => coresight-cpu-debug.rst} |  63 ++--
>  .../trace/{coresight.txt => coresight.rst}         | 352 +++++++++++----------
>  Documentation/trace/index.rst                      |   2 +
>  MAINTAINERS                                        |   4 +-
>  4 files changed, 229 insertions(+), 192 deletions(-)
>  rename Documentation/trace/{coresight-cpu-debug.txt => coresight-cpu-debug.rst} (84%)
>  rename Documentation/trace/{coresight.txt => coresight.rst} (55%)
> 
> diff --git a/Documentation/trace/coresight-cpu-debug.txt b/Documentation/trace/coresight-cpu-debug.rst
> similarity index 84%
> rename from Documentation/trace/coresight-cpu-debug.txt
> rename to Documentation/trace/coresight-cpu-debug.rst
> index f07e38094b40..b219d75f4f8a 100644
> --- a/Documentation/trace/coresight-cpu-debug.txt
> +++ b/Documentation/trace/coresight-cpu-debug.rst
> @@ -1,5 +1,6 @@
> -		Coresight CPU Debug Module
> -		==========================
> +==========================
> +Coresight CPU Debug Module
> +==========================
>  
>     Author:   Leo Yan <leo.yan at linaro.org>
>     Date:     April 5th, 2017

You need to either add a blank line between Author: and Date or to
use:

	:Author: foo	
	:Date: bar

as otherwise, it will output those on a single line at the output.

> @@ -69,6 +70,7 @@ Before accessing debug registers, we should ensure the clock and power domain
>  have been enabled properly. In ARMv8-a ARM (ARM DDI 0487A.k) chapter 'H9.1
>  Debug registers', the debug registers are spread into two domains: the debug
>  domain and the CPU domain.
> +::
>  
>                                  +---------------+
>                                  |               |
> @@ -125,18 +127,21 @@ If you want to enable debugging functionality at boot time, you can add
>  "coresight_cpu_debug.enable=1" to the kernel command line parameter.
>  
>  The driver also can work as module, so can enable the debugging when insmod
> -module:
> -# insmod coresight_cpu_debug.ko debug=1
> +module::
> +
> +  # insmod coresight_cpu_debug.ko debug=1
>  
>  When boot time or insmod module you have not enabled the debugging, the driver
>  uses the debugfs file system to provide a knob to dynamically enable or disable
>  debugging:
>  
> -To enable it, write a '1' into /sys/kernel/debug/coresight_cpu_debug/enable:
> -# echo 1 > /sys/kernel/debug/coresight_cpu_debug/enable
> +To enable it, write a '1' into /sys/kernel/debug/coresight_cpu_debug/enable::
> +
> +  # echo 1 > /sys/kernel/debug/coresight_cpu_debug/enable
> +
> +To disable it, write a '0' into /sys/kernel/debug/coresight_cpu_debug/enable::
>  
> -To disable it, write a '0' into /sys/kernel/debug/coresight_cpu_debug/enable:
> -# echo 0 > /sys/kernel/debug/coresight_cpu_debug/enable
> +  # echo 0 > /sys/kernel/debug/coresight_cpu_debug/enable
>  
>  As explained in chapter "Clock and power domain", if you are working on one
>  platform which has idle states to power off debug logic and the power
> @@ -154,34 +159,34 @@ subsystem, more specifically by using the "/dev/cpu_dma_latency"
>  interface (see Documentation/power/pm_qos_interface.txt for more
>  details).  As specified in the PM QoS documentation the requested
>  parameter will stay in effect until the file descriptor is released.
> -For example:
> +For example::
>  
> -# exec 3<> /dev/cpu_dma_latency; echo 0 >&3
> -...
> -Do some work...
> -...
> -# exec 3<>-
> +  # exec 3<> /dev/cpu_dma_latency; echo 0 >&3
> +  ...
> +  Do some work...
> +  ...
> +  # exec 3<>-
>  
>  The same can also be done from an application program.
>  
>  Disable specific CPU's specific idle state from cpuidle sysfs (see
> -Documentation/admin-guide/pm/cpuidle.rst):
> -# echo 1 > /sys/devices/system/cpu/cpu$cpu/cpuidle/state$state/disable
> +Documentation/admin-guide/pm/cpuidle.rst)::
>  
> +  # echo 1 > /sys/devices/system/cpu/cpu$cpu/cpuidle/state$state/disable
>  
>  Output format
>  -------------
>  
> -Here is an example of the debugging output format:
> -
> -ARM external debug module:
> -coresight-cpu-debug 850000.debug: CPU[0]:
> -coresight-cpu-debug 850000.debug:  EDPRSR:  00000001 (Power:On DLK:Unlock)
> -coresight-cpu-debug 850000.debug:  EDPCSR:  handle_IPI+0x174/0x1d8
> -coresight-cpu-debug 850000.debug:  EDCIDSR: 00000000
> -coresight-cpu-debug 850000.debug:  EDVIDSR: 90000000 (State:Non-secure Mode:EL1/0 Width:64bits VMID:0)
> -coresight-cpu-debug 852000.debug: CPU[1]:
> -coresight-cpu-debug 852000.debug:  EDPRSR:  00000001 (Power:On DLK:Unlock)
> -coresight-cpu-debug 852000.debug:  EDPCSR:  debug_notifier_call+0x23c/0x358
> -coresight-cpu-debug 852000.debug:  EDCIDSR: 00000000
> -coresight-cpu-debug 852000.debug:  EDVIDSR: 90000000 (State:Non-secure Mode:EL1/0 Width:64bits VMID:0)
> +Here is an example of the debugging output format::
> +
> +  ARM external debug module:
> +  coresight-cpu-debug 850000.debug: CPU[0]:
> +  coresight-cpu-debug 850000.debug:  EDPRSR:  00000001 (Power:On DLK:Unlock)
> +  coresight-cpu-debug 850000.debug:  EDPCSR:  handle_IPI+0x174/0x1d8
> +  coresight-cpu-debug 850000.debug:  EDCIDSR: 00000000
> +  coresight-cpu-debug 850000.debug:  EDVIDSR: 90000000 (State:Non-secure Mode:EL1/0 Width:64bits VMID:0)
> +  coresight-cpu-debug 852000.debug: CPU[1]:
> +  coresight-cpu-debug 852000.debug:  EDPRSR:  00000001 (Power:On DLK:Unlock)
> +  coresight-cpu-debug 852000.debug:  EDPCSR:  debug_notifier_call+0x23c/0x358
> +  coresight-cpu-debug 852000.debug:  EDCIDSR: 00000000
> +  coresight-cpu-debug 852000.debug:  EDVIDSR: 90000000 (State:Non-secure Mode:EL1/0 Width:64bits VMID:0)

> diff --git a/Documentation/trace/coresight.txt b/Documentation/trace/coresight.rst
> similarity index 55%
> rename from Documentation/trace/coresight.txt
> rename to Documentation/trace/coresight.rst
> index efbc832146e7..fc9486b7bd87 100644
> --- a/Documentation/trace/coresight.txt
> +++ b/Documentation/trace/coresight.rst
> @@ -1,5 +1,6 @@
> -		Coresight - HW Assisted Tracing on ARM
> -		======================================
> +======================================
> +Coresight - HW Assisted Tracing on ARM
> +======================================
>  
>     Author:   Mathieu Poirier <mathieu.poirier at linaro.org>
>     Date:     September 11th, 2014

Same comment here.

> @@ -26,7 +27,7 @@ implementation, either storing the compressed stream in a memory buffer or
>  creating an interface to the outside world where data can be transferred to a
>  host without fear of filling up the onboard coresight memory buffer.
>  
> -At typical coresight system would look like this:
> +At typical coresight system would look like this::
>  
>    *****************************************************************
>   **************************** AMBA AXI  ****************************===||
> @@ -93,17 +94,17 @@ intricate IP blocks such as STM and CTI.
>  Acronyms and Classification
>  ---------------------------
>  
> -Acronyms:
> +Acronyms::
>  
> -PTM:     Program Trace Macrocell
> -ETM:     Embedded Trace Macrocell
> -STM:     System trace Macrocell
> -ETB:     Embedded Trace Buffer
> -ITM:     Instrumentation Trace Macrocell
> -TPIU:    Trace Port Interface Unit
> -TMC-ETR: Trace Memory Controller, configured as Embedded Trace Router
> -TMC-ETF: Trace Memory Controller, configured as Embedded Trace FIFO
> -CTI:     Cross Trigger Interface
> +   PTM:     Program Trace Macrocell
> +   ETM:     Embedded Trace Macrocell
> +   STM:     System trace Macrocell
> +   ETB:     Embedded Trace Buffer
> +   ITM:     Instrumentation Trace Macrocell
> +   TPIU:    Trace Port Interface Unit
> +   TMC-ETR: Trace Memory Controller, configured as Embedded Trace Router
> +   TMC-ETF: Trace Memory Controller, configured as Embedded Trace FIFO
> +   CTI:     Cross Trigger Interface

The best here would be to add blank lines/spaces, instead. E. g.:

	PTM:
		Program Trace Macrocell
	ETM:
		Embedded Trace Macrocell

and so on.

>  
>  Classification:
>  
> @@ -118,7 +119,7 @@ Misc:
>  
>  
>  Device Tree Bindings
> -----------------------
> +--------------------
>  
>  See Documentation/devicetree/bindings/arm/coresight.txt for details.
>  
> @@ -133,57 +134,79 @@ The coresight framework provides a central point to represent, configure and
>  manage coresight devices on a platform.  Any coresight compliant device can
>  register with the framework for as long as they use the right APIs:
>  
> -struct coresight_device *coresight_register(struct coresight_desc *desc);
> -void coresight_unregister(struct coresight_device *csdev);
> +.. c:function:: struct coresight_device *coresight_register(struct coresight_desc *desc);
> +.. c:function:: void coresight_unregister(struct coresight_device *csdev);
>  
> -The registering function is taking a "struct coresight_device *csdev" and
> -register the device with the core framework.  The unregister function takes
> -a reference to a "struct coresight_device", obtained at registration time.
> +The registering function is taking a
> +::
> +
> +    struct coresight_desc *desc
> +
> +and register the device with the core framework.  The unregister function takes
> +a reference to a
> +::
> +
> +   struct coresight_device *csdev
> +
> +The pointer csdev obtained at registration time.
>  
>  If everything goes well during the registration process the new devices will
> -show up under /sys/bus/coresight/devices, as showns here for a TC2 platform:
> +show up under /sys/bus/coresight/devices, as showns here for a TC2 platform::
>  
> -root:~# ls /sys/bus/coresight/devices/
> -replicator  20030000.tpiu    2201c000.ptm  2203c000.etm  2203e000.etm
> -20010000.etb         20040000.funnel  2201d000.ptm  2203d000.etm
> -root:~#
> +    root:~# ls /sys/bus/coresight/devices/
> +    replicator  20030000.tpiu    2201c000.ptm  2203c000.etm  2203e000.etm
> +    20010000.etb         20040000.funnel  2201d000.ptm  2203d000.etm
> +    root:~#
>  
> -The functions take a "struct coresight_device", which looks like this:
> +The functions take a struct coresight_device, which looks like this::
>  
> -struct coresight_desc {
> -        enum coresight_dev_type type;
> -        struct coresight_dev_subtype subtype;
> -        const struct coresight_ops *ops;
> -        struct coresight_platform_data *pdata;
> -        struct device *dev;
> -        const struct attribute_group **groups;
> -};
> +    struct coresight_desc {
> +            enum coresight_dev_type type;
> +            struct coresight_dev_subtype subtype;
> +            const struct coresight_ops *ops;
> +            struct coresight_platform_data *pdata;
> +            struct device *dev;
> +            const struct attribute_group **groups;
> +    };
>  
>  
>  The "coresight_dev_type" identifies what the device is, i.e, source link or
>  sink while the "coresight_dev_subtype" will characterise that type further.
>  
> -The "struct coresight_ops" is mandatory and will tell the framework how to
> +The struct coresight_ops is mandatory and will tell the framework how to

Why did you remove the "" here? (same applies to other places below)

>  perform base operations related to the components, each component having
> -a different set of requirement.  For that "struct coresight_ops_sink",
> -"struct coresight_ops_link" and "struct coresight_ops_source" have been
> +a different set of requirement.  For that struct coresight_ops_sink,
> +struct coresight_ops_link and struct coresight_ops_source have been
>  provided.
>  
> -The next field, "struct coresight_platform_data *pdata" is acquired by calling
> -"of_get_coresight_platform_data()", as part of the driver's _probe routine and
> -"struct device *dev" gets the device reference embedded in the "amba_device":
> +The next field
> +::
> +
> +    struct coresight_platform_data *pdata
> +
> +is acquired by calling of_get_coresight_platform_data(), as part of
> +the driver's _probe routine and
> +::

Better to use, instead, ``struct coresight_platform_data *pdata``, e. g.:

	The next field, ``struct coresight_platform_data *pdata`` is acquired by calling
	of_get_coresight_platform_data(), as part of the driver's _probe routine and
	``struct device *dev`` gets the device reference embedded in the "amba_device"::



>  
> -static int etm_probe(struct amba_device *adev, const struct amba_id *id)
> -{
> - ...
> - ...
> - drvdata->dev = &adev->dev;
> - ...
> -}
> +    struct device *dev
> +
> +gets the device reference embedded in the amba_device::
> +
> +    static int etm_probe(struct amba_device *adev, const struct amba_id *id)
> +    {
> +     ...
> +     ...
> +     drvdata->dev = &adev->dev;
> +     ...
> +    }
>  
>  Specific class of device (source, link, or sink) have generic operations
> -that can be performed on them (see "struct coresight_ops").  The
> -"**groups" is a list of sysfs entries pertaining to operations
> +that can be performed on them (see struct coresight_ops).  The
> +::
> +
> +    const struct attribute_group **groups
> +
> +is a list of sysfs entries pertaining to operations

Same here.

>  specific to that component only.  "Implementation defined" customisations are
>  expected to be accessed and controlled using those entries.
>  
> @@ -191,9 +214,12 @@ expected to be accessed and controlled using those entries.
>  How to use the tracer modules
>  -----------------------------
>  
> -There are two ways to use the Coresight framework: 1) using the perf cmd line
> -tools and 2) interacting directly with the Coresight devices using the sysFS
> -interface.  Preference is given to the former as using the sysFS interface
> +There are two ways to use the Coresight framework:
> +
> +1. using the perf cmd line tools.
> +2. interacting directly with the Coresight devices using the sysFS interface.
> +
> +Preference is given to the former as using the sysFS interface
>  requires a deep understanding of the Coresight HW.  The following sections
>  provide details on using both methods.
>  
> @@ -202,107 +228,107 @@ provide details on using both methods.
>  Before trace collection can start, a coresight sink needs to be identified.
>  There is no limit on the amount of sinks (nor sources) that can be enabled at
>  any given moment.  As a generic operation, all device pertaining to the sink
> -class will have an "active" entry in sysfs:
> -
> -root:/sys/bus/coresight/devices# ls
> -replicator  20030000.tpiu    2201c000.ptm  2203c000.etm  2203e000.etm
> -20010000.etb         20040000.funnel  2201d000.ptm  2203d000.etm
> -root:/sys/bus/coresight/devices# ls 20010000.etb
> -enable_sink  status  trigger_cntr
> -root:/sys/bus/coresight/devices# echo 1 > 20010000.etb/enable_sink
> -root:/sys/bus/coresight/devices# cat 20010000.etb/enable_sink
> -1
> -root:/sys/bus/coresight/devices#
> +class will have an "active" entry in sysfs::
> +
> +    root:/sys/bus/coresight/devices# ls
> +    replicator  20030000.tpiu    2201c000.ptm  2203c000.etm  2203e000.etm
> +    20010000.etb         20040000.funnel  2201d000.ptm  2203d000.etm
> +    root:/sys/bus/coresight/devices# ls 20010000.etb
> +    enable_sink  status  trigger_cntr
> +    root:/sys/bus/coresight/devices# echo 1 > 20010000.etb/enable_sink
> +    root:/sys/bus/coresight/devices# cat 20010000.etb/enable_sink
> +    1
> +    root:/sys/bus/coresight/devices#
>  
>  At boot time the current etm3x driver will configure the first address
>  comparator with "_stext" and "_etext", essentially tracing any instruction
>  that falls within that range.  As such "enabling" a source will immediately
> -trigger a trace capture:
> -
> -root:/sys/bus/coresight/devices# echo 1 > 2201c000.ptm/enable_source
> -root:/sys/bus/coresight/devices# cat 2201c000.ptm/enable_source
> -1
> -root:/sys/bus/coresight/devices# cat 20010000.etb/status
> -Depth:          0x2000
> -Status:         0x1
> -RAM read ptr:   0x0
> -RAM wrt ptr:    0x19d3   <----- The write pointer is moving
> -Trigger cnt:    0x0
> -Control:        0x1
> -Flush status:   0x0
> -Flush ctrl:     0x2001
> -root:/sys/bus/coresight/devices#
> -
> -Trace collection is stopped the same way:
> -
> -root:/sys/bus/coresight/devices# echo 0 > 2201c000.ptm/enable_source
> -root:/sys/bus/coresight/devices#
> -
> -The content of the ETB buffer can be harvested directly from /dev:
> -
> -root:/sys/bus/coresight/devices# dd if=/dev/20010000.etb \
> -of=~/cstrace.bin
> -
> -64+0 records in
> -64+0 records out
> -32768 bytes (33 kB) copied, 0.00125258 s, 26.2 MB/s
> -root:/sys/bus/coresight/devices#
> +trigger a trace capture::
> +
> +    root:/sys/bus/coresight/devices# echo 1 > 2201c000.ptm/enable_source
> +    root:/sys/bus/coresight/devices# cat 2201c000.ptm/enable_source
> +    1
> +    root:/sys/bus/coresight/devices# cat 20010000.etb/status
> +    Depth:          0x2000
> +    Status:         0x1
> +    RAM read ptr:   0x0
> +    RAM wrt ptr:    0x19d3   <----- The write pointer is moving
> +    Trigger cnt:    0x0
> +    Control:        0x1
> +    Flush status:   0x0
> +    Flush ctrl:     0x2001
> +    root:/sys/bus/coresight/devices#
> +
> +Trace collection is stopped the same way::
> +
> +    root:/sys/bus/coresight/devices# echo 0 > 2201c000.ptm/enable_source
> +    root:/sys/bus/coresight/devices#
> +
> +The content of the ETB buffer can be harvested directly from /dev::
> +
> +    root:/sys/bus/coresight/devices# dd if=/dev/20010000.etb \
> +    of=~/cstrace.bin
> +    64+0 records in
> +    64+0 records out
> +    32768 bytes (33 kB) copied, 0.00125258 s, 26.2 MB/s
> +    root:/sys/bus/coresight/devices#
>  
>  The file cstrace.bin can be decompressed using "ptm2human", DS-5 or Trace32.
>  
>  Following is a DS-5 output of an experimental loop that increments a variable up
>  to a certain value.  The example is simple and yet provides a glimpse of the
>  wealth of possibilities that coresight provides.
> -
> -Info                                    Tracing enabled
> -Instruction     106378866       0x8026B53C      E52DE004        false   PUSH     {lr}
> -Instruction     0       0x8026B540      E24DD00C        false   SUB      sp,sp,#0xc
> -Instruction     0       0x8026B544      E3A03000        false   MOV      r3,#0
> -Instruction     0       0x8026B548      E58D3004        false   STR      r3,[sp,#4]
> -Instruction     0       0x8026B54C      E59D3004        false   LDR      r3,[sp,#4]
> -Instruction     0       0x8026B550      E3530004        false   CMP      r3,#4
> -Instruction     0       0x8026B554      E2833001        false   ADD      r3,r3,#1
> -Instruction     0       0x8026B558      E58D3004        false   STR      r3,[sp,#4]
> -Instruction     0       0x8026B55C      DAFFFFFA        true    BLE      {pc}-0x10 ; 0x8026b54c
> -Timestamp                                       Timestamp: 17106715833
> -Instruction     319     0x8026B54C      E59D3004        false   LDR      r3,[sp,#4]
> -Instruction     0       0x8026B550      E3530004        false   CMP      r3,#4
> -Instruction     0       0x8026B554      E2833001        false   ADD      r3,r3,#1
> -Instruction     0       0x8026B558      E58D3004        false   STR      r3,[sp,#4]
> -Instruction     0       0x8026B55C      DAFFFFFA        true    BLE      {pc}-0x10 ; 0x8026b54c
> -Instruction     9       0x8026B54C      E59D3004        false   LDR      r3,[sp,#4]
> -Instruction     0       0x8026B550      E3530004        false   CMP      r3,#4
> -Instruction     0       0x8026B554      E2833001        false   ADD      r3,r3,#1
> -Instruction     0       0x8026B558      E58D3004        false   STR      r3,[sp,#4]
> -Instruction     0       0x8026B55C      DAFFFFFA        true    BLE      {pc}-0x10 ; 0x8026b54c
> -Instruction     7       0x8026B54C      E59D3004        false   LDR      r3,[sp,#4]
> -Instruction     0       0x8026B550      E3530004        false   CMP      r3,#4
> -Instruction     0       0x8026B554      E2833001        false   ADD      r3,r3,#1
> -Instruction     0       0x8026B558      E58D3004        false   STR      r3,[sp,#4]
> -Instruction     0       0x8026B55C      DAFFFFFA        true    BLE      {pc}-0x10 ; 0x8026b54c
> -Instruction     7       0x8026B54C      E59D3004        false   LDR      r3,[sp,#4]
> -Instruction     0       0x8026B550      E3530004        false   CMP      r3,#4
> -Instruction     0       0x8026B554      E2833001        false   ADD      r3,r3,#1
> -Instruction     0       0x8026B558      E58D3004        false   STR      r3,[sp,#4]
> -Instruction     0       0x8026B55C      DAFFFFFA        true    BLE      {pc}-0x10 ; 0x8026b54c
> -Instruction     10      0x8026B54C      E59D3004        false   LDR      r3,[sp,#4]
> -Instruction     0       0x8026B550      E3530004        false   CMP      r3,#4
> -Instruction     0       0x8026B554      E2833001        false   ADD      r3,r3,#1
> -Instruction     0       0x8026B558      E58D3004        false   STR      r3,[sp,#4]
> -Instruction     0       0x8026B55C      DAFFFFFA        true    BLE      {pc}-0x10 ; 0x8026b54c
> -Instruction     6       0x8026B560      EE1D3F30        false   MRC      p15,#0x0,r3,c13,c0,#1
> -Instruction     0       0x8026B564      E1A0100D        false   MOV      r1,sp
> -Instruction     0       0x8026B568      E3C12D7F        false   BIC      r2,r1,#0x1fc0
> -Instruction     0       0x8026B56C      E3C2203F        false   BIC      r2,r2,#0x3f
> -Instruction     0       0x8026B570      E59D1004        false   LDR      r1,[sp,#4]
> -Instruction     0       0x8026B574      E59F0010        false   LDR      r0,[pc,#16] ; [0x8026B58C] = 0x80550368
> -Instruction     0       0x8026B578      E592200C        false   LDR      r2,[r2,#0xc]
> -Instruction     0       0x8026B57C      E59221D0        false   LDR      r2,[r2,#0x1d0]
> -Instruction     0       0x8026B580      EB07A4CF        true    BL       {pc}+0x1e9344 ; 0x804548c4
> -Info                                    Tracing enabled
> -Instruction     13570831        0x8026B584      E28DD00C        false   ADD      sp,sp,#0xc
> -Instruction     0       0x8026B588      E8BD8000        true    LDM      sp!,{pc}
> -Timestamp                                       Timestamp: 17107041535
> +::
> +
> +    Info                                    Tracing enabled
> +    Instruction     106378866       0x8026B53C      E52DE004        false   PUSH     {lr}
> +    Instruction     0       0x8026B540      E24DD00C        false   SUB      sp,sp,#0xc
> +    Instruction     0       0x8026B544      E3A03000        false   MOV      r3,#0
> +    Instruction     0       0x8026B548      E58D3004        false   STR      r3,[sp,#4]
> +    Instruction     0       0x8026B54C      E59D3004        false   LDR      r3,[sp,#4]
> +    Instruction     0       0x8026B550      E3530004        false   CMP      r3,#4
> +    Instruction     0       0x8026B554      E2833001        false   ADD      r3,r3,#1
> +    Instruction     0       0x8026B558      E58D3004        false   STR      r3,[sp,#4]
> +    Instruction     0       0x8026B55C      DAFFFFFA        true    BLE      {pc}-0x10 ; 0x8026b54c
> +    Timestamp                                       Timestamp: 17106715833
> +    Instruction     319     0x8026B54C      E59D3004        false   LDR      r3,[sp,#4]
> +    Instruction     0       0x8026B550      E3530004        false   CMP      r3,#4
> +    Instruction     0       0x8026B554      E2833001        false   ADD      r3,r3,#1
> +    Instruction     0       0x8026B558      E58D3004        false   STR      r3,[sp,#4]
> +    Instruction     0       0x8026B55C      DAFFFFFA        true    BLE      {pc}-0x10 ; 0x8026b54c
> +    Instruction     9       0x8026B54C      E59D3004        false   LDR      r3,[sp,#4]
> +    Instruction     0       0x8026B550      E3530004        false   CMP      r3,#4
> +    Instruction     0       0x8026B554      E2833001        false   ADD      r3,r3,#1
> +    Instruction     0       0x8026B558      E58D3004        false   STR      r3,[sp,#4]
> +    Instruction     0       0x8026B55C      DAFFFFFA        true    BLE      {pc}-0x10 ; 0x8026b54c
> +    Instruction     7       0x8026B54C      E59D3004        false   LDR      r3,[sp,#4]
> +    Instruction     0       0x8026B550      E3530004        false   CMP      r3,#4
> +    Instruction     0       0x8026B554      E2833001        false   ADD      r3,r3,#1
> +    Instruction     0       0x8026B558      E58D3004        false   STR      r3,[sp,#4]
> +    Instruction     0       0x8026B55C      DAFFFFFA        true    BLE      {pc}-0x10 ; 0x8026b54c
> +    Instruction     7       0x8026B54C      E59D3004        false   LDR      r3,[sp,#4]
> +    Instruction     0       0x8026B550      E3530004        false   CMP      r3,#4
> +    Instruction     0       0x8026B554      E2833001        false   ADD      r3,r3,#1
> +    Instruction     0       0x8026B558      E58D3004        false   STR      r3,[sp,#4]
> +    Instruction     0       0x8026B55C      DAFFFFFA        true    BLE      {pc}-0x10 ; 0x8026b54c
> +    Instruction     10      0x8026B54C      E59D3004        false   LDR      r3,[sp,#4]
> +    Instruction     0       0x8026B550      E3530004        false   CMP      r3,#4
> +    Instruction     0       0x8026B554      E2833001        false   ADD      r3,r3,#1
> +    Instruction     0       0x8026B558      E58D3004        false   STR      r3,[sp,#4]
> +    Instruction     0       0x8026B55C      DAFFFFFA        true    BLE      {pc}-0x10 ; 0x8026b54c
> +    Instruction     6       0x8026B560      EE1D3F30        false   MRC      p15,#0x0,r3,c13,c0,#1
> +    Instruction     0       0x8026B564      E1A0100D        false   MOV      r1,sp
> +    Instruction     0       0x8026B568      E3C12D7F        false   BIC      r2,r1,#0x1fc0
> +    Instruction     0       0x8026B56C      E3C2203F        false   BIC      r2,r2,#0x3f
> +    Instruction     0       0x8026B570      E59D1004        false   LDR      r1,[sp,#4]
> +    Instruction     0       0x8026B574      E59F0010        false   LDR      r0,[pc,#16] ; [0x8026B58C] = 0x80550368
> +    Instruction     0       0x8026B578      E592200C        false   LDR      r2,[r2,#0xc]
> +    Instruction     0       0x8026B57C      E59221D0        false   LDR      r2,[r2,#0x1d0]
> +    Instruction     0       0x8026B580      EB07A4CF        true    BL       {pc}+0x1e9344 ; 0x804548c4
> +    Info                                    Tracing enabled
> +    Instruction     13570831        0x8026B584      E28DD00C        false   ADD      sp,sp,#0xc
> +    Instruction     0       0x8026B588      E8BD8000        true    LDM      sp!,{pc}
> +    Timestamp                                       Timestamp: 17107041535
>  
>  2) Using perf framework:
>  
> @@ -327,7 +353,7 @@ A Coresight PMU works the same way as any other PMU, i.e the name of the PMU is
>  listed along with configuration options within forward slashes '/'.  Since a
>  Coresight system will typically have more than one sink, the name of the sink to
>  work with needs to be specified as an event option.  Names for sink to choose
> -from are listed in sysFS under ($SYSFS)/bus/coresight/devices:
> +from are listed in sysFS under ($SYSFS)/bus/coresight/devices::
>  
>  	root at linaro-nano:~# ls /sys/bus/coresight/devices/
>  		20010000.etf   20040000.funnel  20100000.stm  22040000.etm
> @@ -343,14 +369,14 @@ to use for the trace session.
>  
>  More information on the above and other example on how to use Coresight with
>  the perf tools can be found in the "HOWTO.md" file of the openCSD gitHub
> -repository [3].
> +repository [#third]_.
>  
>  2.1) AutoFDO analysis using the perf tools:
>  
>  perf can be used to record and analyze trace of programs.
>  
>  Execution can be recorded using 'perf record' with the cs_etm event,
> -specifying the name of the sink to record to, e.g:
> +specifying the name of the sink to record to, e.g::
>  
>      perf record -e cs_etm/@20070000.etr/u --per-thread
>  
> @@ -369,12 +395,14 @@ Generating coverage files for Feedback Directed Optimization: AutoFDO
>  
>  'perf inject' accepts the --itrace option in which case tracing data is
>  removed and replaced with the synthesized events. e.g.
> +::
>  
>  	perf inject --itrace --strip -i perf.data -o perf.data.new
>  
>  Below is an example of using ARM ETM for autoFDO.  It requires autofdo
>  (https://github.com/google/autofdo) and gcc version 5.  The bubble
>  sort example is from the AutoFDO tutorial (https://gcc.gnu.org/wiki/AutoFDO/Tutorial).
> +::
>  
>  	$ gcc-5 -O3 sort.c -o sort
>  	$ taskset -c 2 ./sort
> @@ -403,28 +431,30 @@ difference is that clients are driving the trace capture rather
>  than the program flow through the code.
>  
>  As with any other CoreSight component, specifics about the STM tracer can be
> -found in sysfs with more information on each entry being found in [1]:
> +found in sysfs with more information on each entry being found in [#first]_::
>  
> -root at genericarmv8:~# ls /sys/bus/coresight/devices/20100000.stm
> -enable_source   hwevent_select  port_enable     subsystem       uevent
> -hwevent_enable  mgmt            port_select     traceid
> -root at genericarmv8:~#
> +    root at genericarmv8:~# ls /sys/bus/coresight/devices/20100000.stm
> +    enable_source   hwevent_select  port_enable     subsystem       uevent
> +    hwevent_enable  mgmt            port_select     traceid
> +    root at genericarmv8:~#
>  
>  Like any other source a sink needs to be identified and the STM enabled before
> -being used:
> +being used::
>  
> -root at genericarmv8:~# echo 1 > /sys/bus/coresight/devices/20010000.etf/enable_sink
> -root at genericarmv8:~# echo 1 > /sys/bus/coresight/devices/20100000.stm/enable_source
> +    root at genericarmv8:~# echo 1 > /sys/bus/coresight/devices/20010000.etf/enable_sink
> +    root at genericarmv8:~# echo 1 > /sys/bus/coresight/devices/20100000.stm/enable_source
>  
>  From there user space applications can request and use channels using the devfs
> -interface provided for that purpose by the generic STM API:
> +interface provided for that purpose by the generic STM API::
> +
> +    root at genericarmv8:~# ls -l /dev/20100000.stm
> +    crw-------    1 root     root       10,  61 Jan  3 18:11 /dev/20100000.stm
> +    root at genericarmv8:~#
> +
> +Details on how to use the generic STM API can be found here [#second]_.
>  
> -root at genericarmv8:~# ls -l /dev/20100000.stm
> -crw-------    1 root     root       10,  61 Jan  3 18:11 /dev/20100000.stm
> -root at genericarmv8:~#
> +.. [#first] Documentation/ABI/testing/sysfs-bus-coresight-devices-stm
>  
> -Details on how to use the generic STM API can be found here [2].
> +.. [#second] Documentation/trace/stm.rst
>  
> -[1]. Documentation/ABI/testing/sysfs-bus-coresight-devices-stm
> -[2]. Documentation/trace/stm.rst
> -[3]. https://github.com/Linaro/perf-opencsd
> +.. [#third] https://github.com/Linaro/perf-opencsd
> diff --git a/Documentation/trace/index.rst b/Documentation/trace/index.rst
> index 6b4107cf4b98..b7891cb1ab4d 100644
> --- a/Documentation/trace/index.rst
> +++ b/Documentation/trace/index.rst
> @@ -23,3 +23,5 @@ Linux Tracing Technologies
>     intel_th
>     stm
>     sys-t
> +   coresight
> +   coresight-cpu-debug
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 558acf24ea1e..04b006e5cc0a 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -1549,8 +1549,8 @@ R:	Suzuki K Poulose <suzuki.poulose at arm.com>
>  L:	linux-arm-kernel at lists.infradead.org (moderated for non-subscribers)
>  S:	Maintained
>  F:	drivers/hwtracing/coresight/*
> -F:	Documentation/trace/coresight.txt
> -F:	Documentation/trace/coresight-cpu-debug.txt
> +F:	Documentation/trace/coresight.rst
> +F:	Documentation/trace/coresight-cpu-debug.rst
>  F:	Documentation/devicetree/bindings/arm/coresight.txt
>  F:	Documentation/devicetree/bindings/arm/coresight-cpu-debug.txt
>  F:	Documentation/ABI/testing/sysfs-bus-coresight-devices-*



Thanks,
Mauro


More information about the Linux-kernel-mentees mailing list