[Linux-kernel-mentees] [PATCH v2] Documentation: filesystems: Convert jfs.txt to

Mauro Carvalho Chehab mchehab+samsung at kernel.org
Wed Jul 10 12:33:23 UTC 2019


Em Tue,  9 Jul 2019 20:25:25 -0700
Shobhit Kukreti <shobhitkukreti at gmail.com> escreveu:

> This converts the plain text documentation of jfs.txt to reStructuredText format.
> Added to documentation build process and verified with make htmldocs
> 
> Signed-off-by: Shobhit Kukreti <shobhitkukreti at gmail.com>
> ---
> Changes in v2:
>         1. Removed flat-table.
>         2. Moved jfs.rst from filesystem to admin-guide
> 
>  Documentation/admin-guide/index.rst |  1 +
>  Documentation/admin-guide/jfs.rst   | 50 +++++++++++++++++++++++++++++++++++
>  Documentation/filesystems/jfs.txt   | 52 -------------------------------------
>  3 files changed, 51 insertions(+), 52 deletions(-)
>  create mode 100644 Documentation/admin-guide/jfs.rst
>  delete mode 100644 Documentation/filesystems/jfs.txt

As commented on ufs patch, please use -M1 to show it as a diff, and not as
two separate changes.

> 
> diff --git a/Documentation/admin-guide/index.rst b/Documentation/admin-guide/index.rst
> index 8001917..2871b79 100644
> --- a/Documentation/admin-guide/index.rst
> +++ b/Documentation/admin-guide/index.rst
> @@ -70,6 +70,7 @@ configure specific aspects of kernel behavior to your liking.
>     ras
>     bcache
>     ext4
> +   jfs
>     pm/index
>     thunderbolt
>     LSM/index
> diff --git a/Documentation/admin-guide/jfs.rst b/Documentation/admin-guide/jfs.rst
> new file mode 100644
> index 0000000..a0a95e5
> --- /dev/null
> +++ b/Documentation/admin-guide/jfs.rst
> @@ -0,0 +1,50 @@
> +===========================================
> +IBM's Journaled File System (JFS) for Linux
> +===========================================
> +
> +JFS Homepage:  `<http://jfs.sourceforge.net/>`_
> +

No need. Just keep it as:

	JFS Homepage:  http://jfs.sourceforge.net/

Sphinx will do the right thing when it finds a URL that starts with
http/https.

> +The following mount options are supported:
> +(*) == default

You need a blank line between those two above.

> +
> +**iocharset=name**      Character set to use for converting from Unicode to ASCII. The default is to do no conversion.
> +
> +**iocharset=utf8**      Use for UTF-8 translations. This requires CONFIG_NLS_UTF8 to be set in the kernel .config file.
> +
> +**iocharset=none**      specifies the default behavior explicitly.
> +
> +**resize=value**        Resize the volume to <value> blocks. JFS only supports growing a volume, not shrinking it.
> +This option is only valid during a remount, when the volume is mounted read-write. The resize keyword with no value 
> +will grow the volume to the full size of the partition.
> +
> +
> +**nointegrity**	        Do not write to the journal. The primary use of this option is to allow for higher performance 
> +when restoring a volume from backup media. The integrity of the volume is not guaranteed if the system abnormally abends.
> +
> +**integrity(*)**	Commit metadata changes to the journal. Use this option to remount a volume where the nointegrity 
> +option was previously specified in order to restore normal behavior.
> +
> +**errors=continue**	Keep going on a filesystem error.
> +
> +**errors=remount-ro(*)**	Remount the filesystem read-only on an error.
> +
> +**errors=panic**	Panic and halt the machine if an error occurs.
> +
> +**uid=value**	Override on-disk uid with specified value
> +
> +**gid=value**	Override on-disk gid with specified value
> +
> +**umask=value**	Override on-disk umask with specified octal value. For directories, the execute bit will be set if the 
> +corresponding  read bit is set.
> +
> +**discard=minlen, discard, nodiscard(*)**

Please preserve as much as possible the original format.

If you just place the mount option on one line and the description at the
next one, e. g.:

	iocharset=name
	              	Character set to use for converting from Unicode to
	                ASCII.  The default is to do no conversion.  Use
	                iocharset=utf8 for UTF-8 translations.  This requires
	                CONFIG_NLS_UTF8 to be set in the kernel .config file.
	                iocharset=none specifies the default behavior explicitly.

	resize=value
	            	Resize the volume to <value> blocks.  JFS only supports
	                growing a volume, not shrinking it.  This option is only
	                valid during a remount, when the volume is mounted
	                read-write.  The resize keyword with no value will grow
	                the volume to the full size of the partition.
...

It will produce a very nice output, and the changes will be minimum,
without any special markup.


> +
> +This enables/disables the use of discard/TRIM commands. The discard/TRIM 
> +commands are sent to the underlying block device when blocks are freed. This is useful for SSD devices and 
> +sparse/thinly-provisioned LUNs. The FITRIM ioctl command is also available together with the nodiscard option.
> +The value of minlen specifies the minimum blockcount, when a TRIM command to the block device is considered useful.
> +When no value is given to the discard option, it defaults to 64 blocks, which means 256KiB in JFS. The minlen value 
> +of discard overrides the minlen value given on an FITRIM ioctl().
> +
> +The JFS mailing list can be subscribed to by using the link labeled
> +"Mail list Subscribe" at our web page `<http://jfs.sourceforge.net/>`_

Same here: just keep the URL as-is:

	The JFS mailing list can be subscribed to by using the link labeled
	"Mail list Subscribe" at our web page http://jfs.sourceforge.net/


> diff --git a/Documentation/filesystems/jfs.txt b/Documentation/filesystems/jfs.txt
> deleted file mode 100644
> index 41fd757..0000000
> --- a/Documentation/filesystems/jfs.txt
> +++ /dev/null
> @@ -1,52 +0,0 @@
> -IBM's Journaled File System (JFS) for Linux
> -
> -JFS Homepage:  http://jfs.sourceforge.net/
> -
> -The following mount options are supported:
> -(*) == default
> -
> -iocharset=name	Character set to use for converting from Unicode to
> -		ASCII.  The default is to do no conversion.  Use
> -		iocharset=utf8 for UTF-8 translations.  This requires
> -		CONFIG_NLS_UTF8 to be set in the kernel .config file.
> -		iocharset=none specifies the default behavior explicitly.
> -
> -resize=value	Resize the volume to <value> blocks.  JFS only supports
> -		growing a volume, not shrinking it.  This option is only
> -		valid during a remount, when the volume is mounted
> -		read-write.  The resize keyword with no value will grow
> -		the volume to the full size of the partition.
> -
> -nointegrity	Do not write to the journal.  The primary use of this option
> -		is to allow for higher performance when restoring a volume
> -		from backup media.  The integrity of the volume is not
> -		guaranteed if the system abnormally abends.
> -
> -integrity(*)	Commit metadata changes to the journal.  Use this option to
> -		remount a volume where the nointegrity option was
> -		previously specified in order to restore normal behavior.
> -
> -errors=continue		Keep going on a filesystem error.
> -errors=remount-ro(*)	Remount the filesystem read-only on an error.
> -errors=panic		Panic and halt the machine if an error occurs.
> -
> -uid=value	Override on-disk uid with specified value
> -gid=value	Override on-disk gid with specified value
> -umask=value	Override on-disk umask with specified octal value.  For
> -		directories, the execute bit will be set if the corresponding
> -		read bit is set.
> -
> -discard=minlen	This enables/disables the use of discard/TRIM commands.
> -discard		The discard/TRIM commands are sent to the underlying
> -nodiscard(*)	block device when blocks are freed. This is useful for SSD
> -		devices and sparse/thinly-provisioned LUNs.  The FITRIM ioctl
> -		command is also available together with the nodiscard option.
> -		The value of minlen specifies the minimum blockcount, when
> -		a TRIM command to the block device is considered useful.
> -		When no value is given to the discard option, it defaults to
> -		64 blocks, which means 256KiB in JFS.
> -		The minlen value of discard overrides the minlen value given
> -		on an FITRIM ioctl().
> -
> -The JFS mailing list can be subscribed to by using the link labeled
> -"Mail list Subscribe" at our web page http://jfs.sourceforge.net/



Thanks,
Mauro


More information about the Linux-kernel-mentees mailing list