[Linux-kernel-mentees] [PATCH v2] Documentation:sh:convert register-banks.txt and new-machine.txt to rst format.

Mauro Carvalho Chehab mchehab at kernel.org
Fri Jun 28 13:39:15 UTC 2019


Em Fri, 28 Jun 2019 18:54:59 +0530
Vandana BN <bnvandana at gmail.com> escreveu:

> This patch converts new-machine.txt and register-banks.txt to ReST format, No content
> change.
> Added new-machine.rst and register-banks.rst to sh/index.rst
> 
> Signed-off-by: Vandana BN <bnvandana at gmail.com>
> ---
>  Documentation/sh/index.rst                    |   6 +
>  .../sh/{new-machine.txt => new-machine.rst}   | 171 +++++++++---------
>  ...{register-banks.txt => register-banks.rst} |   8 +-
>  3 files changed, 100 insertions(+), 85 deletions(-)
>  rename Documentation/sh/{new-machine.txt => new-machine.rst} (79%)
>  rename Documentation/sh/{register-banks.txt => register-banks.rst} (90%)
> 
> diff --git a/Documentation/sh/index.rst b/Documentation/sh/index.rst
> index bc8db7ba894a..25471d3fc294 100644
> --- a/Documentation/sh/index.rst
> +++ b/Documentation/sh/index.rst
> @@ -57,3 +57,9 @@ Maple
> 
>  .. kernel-doc:: drivers/sh/maple/maple.c
>     :export:
> +
> +.. toctree::
> +   :maxdepth: 2
> +
> +   new-machine
> +   register-banks

Hmm... adding a toctree at the end doesn't seem the best thing to do.

Adding it at the beginning (just after the title) would be a little
better, but IMHO, moving the kernel-doc markups to another file
would make it to look better.

The remaining patch looks ok on my eyes.

> diff --git a/Documentation/sh/new-machine.txt b/Documentation/sh/new-machine.rst
> similarity index 79%
> rename from Documentation/sh/new-machine.txt
> rename to Documentation/sh/new-machine.rst
> index e0961a66130b..b16c33342642 100644
> --- a/Documentation/sh/new-machine.txt
> +++ b/Documentation/sh/new-machine.rst
> @@ -1,8 +1,8 @@
> +================================
> +Adding a new board to LinuxSH
> +================================
> 
> -                Adding a new board to LinuxSH
> -               ================================
> -
> -               Paul Mundt <lethal at linux-sh.org>
> +Paul Mundt <lethal at linux-sh.org>
> 
>  This document attempts to outline what steps are necessary to add support
>  for new boards to the LinuxSH port under the new 2.5 and 2.6 kernels. This
> @@ -19,65 +19,67 @@ include/asm-sh/. For the new kernel, things are broken out by board type,
>  companion chip type, and CPU type. Looking at a tree view of this directory
>  hierarchy looks like the following:
> 
> -Board-specific code:
> -
> -.
> -|-- arch
> -|   `-- sh
> -|       `-- boards
> -|           |-- adx
> -|           |   `-- board-specific files
> -|           |-- bigsur
> -|           |   `-- board-specific files
> -|           |
> -|           ... more boards here ...
> -|
> -`-- include
> -    `-- asm-sh
> -        |-- adx
> -        |   `-- board-specific headers
> -        |-- bigsur
> -        |   `-- board-specific headers
> -        |
> -	.. more boards here ...
> -
> -Next, for companion chips:
> -.
> -`-- arch
> -    `-- sh
> -        `-- cchips
> -            `-- hd6446x
> -                `-- hd64461
> -                    `-- cchip-specific files
> +Board-specific code::
> +
> + .
> + |-- arch
> + |   `-- sh
> + |       `-- boards
> + |           |-- adx
> + |           |   `-- board-specific files
> + |           |-- bigsur
> + |           |   `-- board-specific files
> + |           |
> + |           ... more boards here ...
> + |
> + `-- include
> +     `-- asm-sh
> +         |-- adx
> +         |   `-- board-specific headers
> +         |-- bigsur
> +         |   `-- board-specific headers
> +         |
> +       	 .. more boards here ...
> +
> +Next, for companion chips::
> +
> + .
> + `-- arch
> +     `-- sh
> +         `-- cchips
> +             `-- hd6446x
> +                 `-- hd64461
> +                     `-- cchip-specific files
> 
>  ... and so on. Headers for the companion chips are treated the same way as
>  board-specific headers. Thus, include/asm-sh/hd64461 is home to all of the
>  hd64461-specific headers.
> 
> -Finally, CPU family support is also abstracted:
> -.
> -|-- arch
> -|   `-- sh
> -|       |-- kernel
> -|       |   `-- cpu
> -|       |       |-- sh2
> -|       |       |   `-- SH-2 generic files
> -|       |       |-- sh3
> -|       |       |   `-- SH-3 generic files
> -|       |       `-- sh4
> -|       |           `-- SH-4 generic files
> -|       `-- mm
> -|           `-- This is also broken out per CPU family, so each family can
> -|               have their own set of cache/tlb functions.
> -|
> -`-- include
> -    `-- asm-sh
> -        |-- cpu-sh2
> -        |   `-- SH-2 specific headers
> -        |-- cpu-sh3
> -        |   `-- SH-3 specific headers
> -        `-- cpu-sh4
> -            `-- SH-4 specific headers
> +Finally, CPU family support is also abstracted::
> +
> + .
> + |-- arch
> + |   `-- sh
> + |       |-- kernel
> + |       |   `-- cpu
> + |       |       |-- sh2
> + |       |       |   `-- SH-2 generic files
> + |       |       |-- sh3
> + |       |       |   `-- SH-3 generic files
> + |       |       `-- sh4
> + |       |           `-- SH-4 generic files
> + |       `-- mm
> + |           `-- This is also broken out per CPU family, so each family can
> + |               have their own set of cache/tlb functions.
> + |
> + `-- include
> +     `-- asm-sh
> +         |-- cpu-sh2
> +         |   `-- SH-2 specific headers
> +         |-- cpu-sh3
> +         |   `-- SH-3 specific headers
> +         `-- cpu-sh4
> +             `-- SH-4 specific headers
> 
>  It should be noted that CPU subtypes are _not_ abstracted. Thus, these still
>  need to be dealt with by the CPU family specific code.
> @@ -112,18 +114,20 @@ setup code, we're required at the very least to provide definitions for
>  get_system_type() and platform_setup(). For our imaginary board, this
>  might look something like:
> 
> -/*
> - * arch/sh/boards/vapor/setup.c - Setup code for imaginary board
> - */
> -#include <linux/init.h>
> +.. code-block:: c
> +
> +    /*
> +     * arch/sh/boards/vapor/setup.c - Setup code for imaginary board
> +     */
> +    #include <linux/init.h>
> 
> -const char *get_system_type(void)
> -{
> -	return "FooTech Vaporboard";
> -}
> +    const char *get_system_type(void)
> +    {
> +        return "FooTech Vaporboard";
> +    }
> 
> -int __init platform_setup(void)
> -{
> +    int __init platform_setup(void)
> +    {
>    	/*
>  	 * If our hardware actually existed, we would do real
>  	 * setup here. Though it's also sane to leave this empty
> @@ -136,7 +140,8 @@ int __init platform_setup(void)
>  	/* And whatever else ... */
> 
>  	return 0;
> -}
> +    }
> +
> 
>  Our new imaginary board will also have to tie into the machvec in order for it
>  to be of any use.
> @@ -172,16 +177,17 @@ sufficient.
>     vector.
> 
>     Note that these prototypes are generated automatically by setting
> -   __IO_PREFIX to something sensible. A typical example would be:
> +   __IO_PREFIX to something sensible. A typical example would be::
> 
>  	#define __IO_PREFIX vapor
>     	#include <asm/io_generic.h>
> 
> +
>     somewhere in the board-specific header. Any boards being ported that still
>     have a legacy io.h should remove it entirely and switch to the new model.
> 
>   - Add machine vector definitions to the board's setup.c. At a bare minimum,
> -   this must be defined as something like:
> +   this must be defined as something like::
> 
>  	struct sh_machine_vector mv_vapor __initmv = {
>  		.mv_name = "vapor",
> @@ -202,11 +208,11 @@ Large portions of the build system are now entirely dynamic, and merely
>  require the proper entry here and there in order to get things done.
> 
>  The first thing to do is to add an entry to arch/sh/Kconfig, under the
> -"System type" menu:
> +"System type" menu::
> 
> -config SH_VAPOR
> -	bool "Vapor"
> -	help
> + config SH_VAPOR
> +	 bool "Vapor"
> +	 help
>  	  select Vapor if configuring for a FooTech Vaporboard.
> 
>  next, this has to be added into arch/sh/Makefile. All boards require a
> @@ -232,6 +238,8 @@ space restating it here. After this is done, you will be able to use
>  implicit checks for your board if you need this somewhere throughout the
>  common code, such as:
> 
> +::
> +
>  	/* Make sure we're on the FooTech Vaporboard */
>  	if (!mach_is_vapor())
>  		return -ENODEV;
> @@ -253,12 +261,13 @@ build target, and it will be implicitly listed as such in the help text.
>  Looking at the 'make help' output, you should now see something like:
> 
>  Architecture specific targets (sh):
> -  zImage                  - Compressed kernel image (arch/sh/boot/zImage)
> -  adx_defconfig           - Build for adx
> -  cqreek_defconfig        - Build for cqreek
> -  dreamcast_defconfig     - Build for dreamcast
> -...
> -  vapor_defconfig         - Build for vapor
> +
> + - zImage                  - Compressed kernel image (arch/sh/boot/zImage)
> + - adx_defconfig           - Build for adx
> + - cqreek_defconfig        - Build for cqreek
> + - dreamcast_defconfig     - Build for dreamcast
> + - ...
> + - vapor_defconfig         - Build for vapor
> 
>  which then allows you to do:
> 
> diff --git a/Documentation/sh/register-banks.txt b/Documentation/sh/register-banks.rst
> similarity index 90%
> rename from Documentation/sh/register-banks.txt
> rename to Documentation/sh/register-banks.rst
> index a6719f2f6594..acccfaf80355 100644
> --- a/Documentation/sh/register-banks.txt
> +++ b/Documentation/sh/register-banks.rst
> @@ -1,8 +1,9 @@
> -	Notes on register bank usage in the kernel
> -	==========================================
> +==========================================
> +Notes on register bank usage in the kernel
> +==========================================
> 
>  Introduction
> -------------
> +============
> 
>  The SH-3 and SH-4 CPU families traditionally include a single partial register
>  bank (selected by SR.RB, only r0 ... r7 are banked), whereas other families
> @@ -30,4 +31,3 @@ Presently the kernel uses several of these registers.
>  		- The SR.IMASK interrupt handler makes use of this to set the
>  		  interrupt priority level (used by local_irq_enable())
>  	- r7_bank (current)
> -
> --
> 2.17.1
> 



Thanks,
Mauro


More information about the Linux-kernel-mentees mailing list