[Linux-kernel-mentees] [PATCH v2 2/4] ide: triflex: use generic power management

Vaibhav Gupta vaibhavgupta40 at gmail.com
Fri Jul 3 08:14:26 UTC 2020


While upgrading ide_pci_suspend() and ide_pci_resume(), all other source
files, using same callbacks, were also updated except
drivers/ide/triflex.c. This is because the driver does not want to power
off the device during suspend. A quirk was required for the same.

This patch provides the fix. Another driver,
drivers/staging/media/atomisp/pci/atomisp_gmin_platform.c, makes use of
a quirk for similar goal. Hence a similar quirk has been applied for
triflex.

Compile-tested only.

Signed-off-by: Vaibhav Gupta <vaibhavgupta40 at gmail.com>
---
 drivers/ide/triflex.c | 45 +++++++++++--------------------------------
 1 file changed, 11 insertions(+), 34 deletions(-)

diff --git a/drivers/ide/triflex.c b/drivers/ide/triflex.c
index 1886bbfb9e5d..f707f11c296d 100644
--- a/drivers/ide/triflex.c
+++ b/drivers/ide/triflex.c
@@ -100,48 +100,25 @@ static const struct pci_device_id triflex_pci_tbl[] = {
 };
 MODULE_DEVICE_TABLE(pci, triflex_pci_tbl);
 
-#ifdef CONFIG_PM
-static int triflex_ide_pci_suspend(struct pci_dev *dev, pm_message_t state)
-{
-	/*
-	 * We must not disable or powerdown the device.
-	 * APM bios refuses to suspend if IDE is not accessible.
-	 */
-	pci_save_state(dev);
-	return 0;
-}
-
-static int triflex_ide_pci_resume(struct pci_dev *dev)
+/*
+ * We must not disable or powerdown the device.
+ * APM bios refuses to suspend if IDE is not accessible.
+ */
+static void triflex_pci_pm_cap_fixup(struct pci_dev *pdev)
 {
-	struct ide_host *host = pci_get_drvdata(dev);
-	int rc;
-
-	pci_set_power_state(dev, PCI_D0);
-
-	rc = pci_enable_device(dev);
-	if (rc)
-		return rc;
-
-	pci_restore_state(dev);
-	pci_set_master(dev);
-
-	if (host->init_chipset)
-		host->init_chipset(dev);
-
-	return 0;
+	dev_info(&pdev->dev, "Disable triflex to be turned off by PCI CORE\n");
+	pdev->pm_cap = 0;
 }
-#else
-#define triflex_ide_pci_suspend NULL
-#define triflex_ide_pci_resume NULL
-#endif
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_COMPAQ,
+			PCI_DEVICE_ID_COMPAQ_TRIFLEX_IDE,
+			triflex_pci_pm_cap_fixup);
 
 static struct pci_driver triflex_pci_driver = {
 	.name		= "TRIFLEX_IDE",
 	.id_table	= triflex_pci_tbl,
 	.probe		= triflex_init_one,
 	.remove		= ide_pci_remove,
-	.suspend	= triflex_ide_pci_suspend,
-	.resume		= triflex_ide_pci_resume,
+	.driver.pm	= &ide_pci_pm_ops,
 };
 
 static int __init triflex_ide_init(void)
-- 
2.27.0



More information about the Linux-kernel-mentees mailing list