[Linux-kernel-mentees] [PATCH v2 09/15] scsi: lpfc: use generic power management

Vaibhav Gupta vaibhavgupta40 at gmail.com
Tue Sep 8 17:03:33 UTC 2020


On Mon, Jul 20, 2020 at 07:04:22PM +0530, Vaibhav Gupta wrote:
> With legacy PM, drivers themselves were responsible for managing the
> device's power states and takes care of register states.
> 
> After upgrading to the generic structure, PCI core will take care of
> required tasks and drivers should do only device-specific operations.
> 
> The driver was calling pci_save/restore_state(), pci_choose_state() and
> pci_set_power_state() which is no more needed.
> 
> Compile-tested only.
> 
> Signed-off-by: Vaibhav Gupta <vaibhavgupta40 at gmail.com>
> ---
>  drivers/scsi/lpfc/lpfc_init.c | 100 +++++++++++-----------------------
>  1 file changed, 33 insertions(+), 67 deletions(-)
> 
> diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
> index 6637f84a3d1b..a36309b48144 100644
> --- a/drivers/scsi/lpfc/lpfc_init.c
> +++ b/drivers/scsi/lpfc/lpfc_init.c
> @@ -12452,8 +12452,7 @@ lpfc_pci_remove_one_s3(struct pci_dev *pdev)
>  
>  /**
>   * lpfc_pci_suspend_one_s3 - PCI func to suspend SLI-3 device for power mgmnt
> - * @pdev: pointer to PCI device
> - * @msg: power management message
> + * @dev_d: pointer to device
>   *
>   * This routine is to be called from the kernel's PCI subsystem to support
>   * system Power Management (PM) to device with SLI-3 interface spec. When
> @@ -12471,10 +12470,10 @@ lpfc_pci_remove_one_s3(struct pci_dev *pdev)
>   * 	0 - driver suspended the device
>   * 	Error otherwise
>   **/
> -static int
> -lpfc_pci_suspend_one_s3(struct pci_dev *pdev, pm_message_t msg)
> +static int __maybe_unused
> +lpfc_pci_suspend_one_s3(struct device *dev_d)
>  {
> -	struct Scsi_Host *shost = pci_get_drvdata(pdev);
> +	struct Scsi_Host *shost = dev_get_drvdata(dev_d);
>  	struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
>  
>  	lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
> @@ -12488,16 +12487,12 @@ lpfc_pci_suspend_one_s3(struct pci_dev *pdev, pm_message_t msg)
>  	/* Disable interrupt from device */
>  	lpfc_sli_disable_intr(phba);
>  
> -	/* Save device state to PCI config space */
> -	pci_save_state(pdev);
> -	pci_set_power_state(pdev, PCI_D3hot);
> -
>  	return 0;
>  }
>  
>  /**
>   * lpfc_pci_resume_one_s3 - PCI func to resume SLI-3 device for power mgmnt
> - * @pdev: pointer to PCI device
> + * @dev_d: pointer to device
>   *
>   * This routine is to be called from the kernel's PCI subsystem to support
>   * system Power Management (PM) to device with SLI-3 interface spec. When PM
> @@ -12514,10 +12509,10 @@ lpfc_pci_suspend_one_s3(struct pci_dev *pdev, pm_message_t msg)
>   * 	0 - driver suspended the device
>   * 	Error otherwise
>   **/
> -static int
> -lpfc_pci_resume_one_s3(struct pci_dev *pdev)
> +static int __maybe_unused
> +lpfc_pci_resume_one_s3(struct device *dev_d)
>  {
> -	struct Scsi_Host *shost = pci_get_drvdata(pdev);
> +	struct Scsi_Host *shost = dev_get_drvdata(dev_d);
>  	struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
>  	uint32_t intr_mode;
>  	int error;
> @@ -12525,19 +12520,6 @@ lpfc_pci_resume_one_s3(struct pci_dev *pdev)
>  	lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
>  			"0452 PCI device Power Management resume.\n");
>  
> -	/* Restore device state from PCI config space */
> -	pci_set_power_state(pdev, PCI_D0);
> -	pci_restore_state(pdev);
> -
> -	/*
> -	 * As the new kernel behavior of pci_restore_state() API call clears
> -	 * device saved_state flag, need to save the restored state again.
> -	 */
> -	pci_save_state(pdev);
> -
> -	if (pdev->is_busmaster)
> -		pci_set_master(pdev);
> -
>  	/* Startup the kernel thread for this host adapter. */
>  	phba->worker_thread = kthread_run(lpfc_do_work, phba,
>  					"lpfc_worker_%d", phba->brd_no);
> @@ -13294,8 +13276,7 @@ lpfc_pci_remove_one_s4(struct pci_dev *pdev)
>  
>  /**
>   * lpfc_pci_suspend_one_s4 - PCI func to suspend SLI-4 device for power mgmnt
> - * @pdev: pointer to PCI device
> - * @msg: power management message
> + * @dev_d: pointer to device
>   *
>   * This routine is called from the kernel's PCI subsystem to support system
>   * Power Management (PM) to device with SLI-4 interface spec. When PM invokes
> @@ -13313,10 +13294,10 @@ lpfc_pci_remove_one_s4(struct pci_dev *pdev)
>   * 	0 - driver suspended the device
>   * 	Error otherwise
>   **/
> -static int
> -lpfc_pci_suspend_one_s4(struct pci_dev *pdev, pm_message_t msg)
> +static int __maybe_unused
> +lpfc_pci_suspend_one_s4(struct device *dev_d)
>  {
> -	struct Scsi_Host *shost = pci_get_drvdata(pdev);
> +	struct Scsi_Host *shost = dev_get_drvdata(dev_d);
>  	struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
>  
>  	lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
> @@ -13331,16 +13312,12 @@ lpfc_pci_suspend_one_s4(struct pci_dev *pdev, pm_message_t msg)
>  	lpfc_sli4_disable_intr(phba);
>  	lpfc_sli4_queue_destroy(phba);
>  
> -	/* Save device state to PCI config space */
> -	pci_save_state(pdev);
> -	pci_set_power_state(pdev, PCI_D3hot);
> -
>  	return 0;
>  }
>  
>  /**
>   * lpfc_pci_resume_one_s4 - PCI func to resume SLI-4 device for power mgmnt
> - * @pdev: pointer to PCI device
> + * @dev_d: pointer to device
>   *
>   * This routine is called from the kernel's PCI subsystem to support system
>   * Power Management (PM) to device with SLI-4 interface spac. When PM invokes
> @@ -13357,10 +13334,10 @@ lpfc_pci_suspend_one_s4(struct pci_dev *pdev, pm_message_t msg)
>   * 	0 - driver suspended the device
>   * 	Error otherwise
>   **/
> -static int
> -lpfc_pci_resume_one_s4(struct pci_dev *pdev)
> +static int __maybe_unused
> +lpfc_pci_resume_one_s4(struct device *dev_d)
>  {
> -	struct Scsi_Host *shost = pci_get_drvdata(pdev);
> +	struct Scsi_Host *shost = dev_get_drvdata(dev_d);
>  	struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
>  	uint32_t intr_mode;
>  	int error;
> @@ -13368,19 +13345,6 @@ lpfc_pci_resume_one_s4(struct pci_dev *pdev)
>  	lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
>  			"0292 PCI device Power Management resume.\n");
>  
> -	/* Restore device state from PCI config space */
> -	pci_set_power_state(pdev, PCI_D0);
> -	pci_restore_state(pdev);
> -
> -	/*
> -	 * As the new kernel behavior of pci_restore_state() API call clears
> -	 * device saved_state flag, need to save the restored state again.
> -	 */
> -	pci_save_state(pdev);
> -
> -	if (pdev->is_busmaster)
> -		pci_set_master(pdev);
> -
>  	 /* Startup the kernel thread for this host adapter. */
>  	phba->worker_thread = kthread_run(lpfc_do_work, phba,
>  					"lpfc_worker_%d", phba->brd_no);
> @@ -13696,8 +13660,7 @@ lpfc_pci_remove_one(struct pci_dev *pdev)
>  
>  /**
>   * lpfc_pci_suspend_one - lpfc PCI func to suspend dev for power management
> - * @pdev: pointer to PCI device
> - * @msg: power management message
> + * @dev: pointer to device
>   *
>   * This routine is to be registered to the kernel's PCI subsystem to support
>   * system Power Management (PM). When PM invokes this method, it dispatches
> @@ -13708,19 +13671,19 @@ lpfc_pci_remove_one(struct pci_dev *pdev)
>   * 	0 - driver suspended the device
>   * 	Error otherwise
>   **/
> -static int
> -lpfc_pci_suspend_one(struct pci_dev *pdev, pm_message_t msg)
> +static int __maybe_unused
> +lpfc_pci_suspend_one(struct device *dev)
>  {
> -	struct Scsi_Host *shost = pci_get_drvdata(pdev);
> +	struct Scsi_Host *shost = dev_get_drvdata(dev);
>  	struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
>  	int rc = -ENODEV;
>  
>  	switch (phba->pci_dev_grp) {
>  	case LPFC_PCI_DEV_LP:
> -		rc = lpfc_pci_suspend_one_s3(pdev, msg);
> +		rc = lpfc_pci_suspend_one_s3(dev);
>  		break;
>  	case LPFC_PCI_DEV_OC:
> -		rc = lpfc_pci_suspend_one_s4(pdev, msg);
> +		rc = lpfc_pci_suspend_one_s4(dev);
>  		break;
>  	default:
>  		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
> @@ -13733,7 +13696,7 @@ lpfc_pci_suspend_one(struct pci_dev *pdev, pm_message_t msg)
>  
>  /**
>   * lpfc_pci_resume_one - lpfc PCI func to resume dev for power management
> - * @pdev: pointer to PCI device
> + * @dev: pointer to device
>   *
>   * This routine is to be registered to the kernel's PCI subsystem to support
>   * system Power Management (PM). When PM invokes this method, it dispatches
> @@ -13744,19 +13707,19 @@ lpfc_pci_suspend_one(struct pci_dev *pdev, pm_message_t msg)
>   * 	0 - driver suspended the device
>   * 	Error otherwise
>   **/
> -static int
> -lpfc_pci_resume_one(struct pci_dev *pdev)
> +static int __maybe_unused
> +lpfc_pci_resume_one(struct device *dev)
>  {
> -	struct Scsi_Host *shost = pci_get_drvdata(pdev);
> +	struct Scsi_Host *shost = dev_get_drvdata(dev);
>  	struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
>  	int rc = -ENODEV;
>  
>  	switch (phba->pci_dev_grp) {
>  	case LPFC_PCI_DEV_LP:
> -		rc = lpfc_pci_resume_one_s3(pdev);
> +		rc = lpfc_pci_resume_one_s3(dev);
>  		break;
>  	case LPFC_PCI_DEV_OC:
> -		rc = lpfc_pci_resume_one_s4(pdev);
> +		rc = lpfc_pci_resume_one_s4(dev);
>  		break;
>  	default:
>  		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
> @@ -13936,14 +13899,17 @@ static const struct pci_error_handlers lpfc_err_handler = {
>  	.resume = lpfc_io_resume,
>  };
>  
> +static SIMPLE_DEV_PM_OPS(lpfc_pci_pm_ops_one,
> +			 lpfc_pci_suspend_one,
> +			 lpfc_pci_resume_one);
> +
>  static struct pci_driver lpfc_driver = {
>  	.name		= LPFC_DRIVER_NAME,
>  	.id_table	= lpfc_id_table,
>  	.probe		= lpfc_pci_probe_one,
>  	.remove		= lpfc_pci_remove_one,
>  	.shutdown	= lpfc_pci_remove_one,
> -	.suspend        = lpfc_pci_suspend_one,
> -	.resume		= lpfc_pci_resume_one,
> +	.driver.pm	= &lpfc_pci_pm_ops_one,
>  	.err_handler    = &lpfc_err_handler,
>  };
>  
> -- 
> 2.27.0
> 
.


More information about the Linux-kernel-mentees mailing list