[Linux-kernel-mentees] [PATCH v2 12/15] scsi: 3w-9xxx: use generic power management

Vaibhav Gupta vaibhavgupta40 at gmail.com
Tue Sep 8 17:05:59 UTC 2020


On Mon, Jul 20, 2020 at 07:04:25PM +0530, Vaibhav Gupta wrote:
> Drivers using legacy PM have to manage PCI states and device's PM states
> themselves. They also need to take care of configuration registers.
> 
> With improved and powerful support of generic PM, PCI Core takes care of
> above mentioned, device-independent, jobs.
> 
> This driver makes use of PCI helper functions like
> pci_save/restore_state(), pci_enable/disable_device(),
> pci_set_power_state() and pci_set_master() to do required operations. In
> generic mode, they are no longer needed.
> 
> Change function parameter in both .suspend() and .resume() to
> "struct device*" type. Use to_pci_dev() and dev_get_drvdata() to get
> "struct pci_dev*" variable and drv data.
> 
> Compile-tested only.
> 
> Signed-off-by: Vaibhav Gupta <vaibhavgupta40 at gmail.com>
> ---
>  drivers/scsi/3w-9xxx.c | 30 ++++++++----------------------
>  1 file changed, 8 insertions(+), 22 deletions(-)
> 
> diff --git a/drivers/scsi/3w-9xxx.c b/drivers/scsi/3w-9xxx.c
> index 3337b1e80412..c15dcfda3957 100644
> --- a/drivers/scsi/3w-9xxx.c
> +++ b/drivers/scsi/3w-9xxx.c
> @@ -2191,10 +2191,10 @@ static void twa_remove(struct pci_dev *pdev)
>  	twa_device_extension_count--;
>  } /* End twa_remove() */
>  
> -#ifdef CONFIG_PM
>  /* This function is called on PCI suspend */
> -static int twa_suspend(struct pci_dev *pdev, pm_message_t state)
> +static int __maybe_unused twa_suspend(struct device *dev)
>  {
> +	struct pci_dev *pdev = to_pci_dev(dev);
>  	struct Scsi_Host *host = pci_get_drvdata(pdev);
>  	TW_Device_Extension *tw_dev = (TW_Device_Extension *)host->hostdata;
>  
> @@ -2214,32 +2214,21 @@ static int twa_suspend(struct pci_dev *pdev, pm_message_t state)
>  	}
>  	TW_CLEAR_ALL_INTERRUPTS(tw_dev);
>  
> -	pci_save_state(pdev);
> -	pci_disable_device(pdev);
> -	pci_set_power_state(pdev, pci_choose_state(pdev, state));
> -
>  	return 0;
>  } /* End twa_suspend() */
>  
>  /* This function is called on PCI resume */
> -static int twa_resume(struct pci_dev *pdev)
> +static int __maybe_unused twa_resume(struct device *dev)
>  {
>  	int retval = 0;
> +	struct pci_dev *pdev = to_pci_dev(dev);
>  	struct Scsi_Host *host = pci_get_drvdata(pdev);
>  	TW_Device_Extension *tw_dev = (TW_Device_Extension *)host->hostdata;
>  
>  	printk(KERN_WARNING "3w-9xxx: Resuming host %d.\n", tw_dev->host->host_no);
> -	pci_set_power_state(pdev, PCI_D0);
> -	pci_enable_wake(pdev, PCI_D0, 0);
> -	pci_restore_state(pdev);
>  
> -	retval = pci_enable_device(pdev);
> -	if (retval) {
> -		TW_PRINTK(tw_dev->host, TW_DRIVER, 0x39, "Enable device failed during resume");
> -		return retval;
> -	}
> +	device_wakeup_disable(dev);
>  
> -	pci_set_master(pdev);
>  	pci_try_set_mwi(pdev);
>  
>  	retval = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64));
> @@ -2277,11 +2266,9 @@ static int twa_resume(struct pci_dev *pdev)
>  
>  out_disable_device:
>  	scsi_remove_host(host);
> -	pci_disable_device(pdev);
>  
>  	return retval;
>  } /* End twa_resume() */
> -#endif
>  
>  /* PCI Devices supported by this driver */
>  static struct pci_device_id twa_pci_tbl[] = {
> @@ -2297,16 +2284,15 @@ static struct pci_device_id twa_pci_tbl[] = {
>  };
>  MODULE_DEVICE_TABLE(pci, twa_pci_tbl);
>  
> +static SIMPLE_DEV_PM_OPS(twa_pm_ops, twa_suspend, twa_resume);
> +
>  /* pci_driver initializer */
>  static struct pci_driver twa_driver = {
>  	.name		= "3w-9xxx",
>  	.id_table	= twa_pci_tbl,
>  	.probe		= twa_probe,
>  	.remove		= twa_remove,
> -#ifdef CONFIG_PM
> -	.suspend	= twa_suspend,
> -	.resume		= twa_resume,
> -#endif
> +	.driver.pm	= &twa_pm_ops,
>  	.shutdown	= twa_shutdown
>  };
>  
> -- 
> 2.27.0
> 
.


More information about the Linux-kernel-mentees mailing list