[Linux-kernel-mentees] [PATCH] media: vidtv: fix build on 32bit architectures

Mauro Carvalho Chehab mchehab at kernel.org
Wed Sep 16 06:40:36 UTC 2020


Em Tue, 15 Sep 2020 15:05:09 -0300
"Daniel W. S. Almeida" <dwlsalmeida at gmail.com> escreveu:

> From: Daniel W. S. Almeida <dwlsalmeida at gmail.com>
> 
> Fix the following error for builds on 32bit architectures:
> 
> ERROR: modpost: "__udivdi3"
> [drivers/media/test-drivers/vidtv/dvb-vidtv-bridge.ko] undefined!
> 
> Which is due to 64bit divisions that did not go through the helpers
> in linux/math64.h
> 
> As vidtv_mux_check_mux_rate was not operational in its current form,
> drop the entire function  while it is not fixed properly.
> 
> For now, call vidtv_mux_pad_with_nulls with a constant number of packets
> to avoid warnings due to unused functions when building this driver.
> 
> Fixes: f90cf6079bf67988 ("media: vidtv: add a bridge driver")
> Signed-off-by: Daniel W. S. Almeida <dwlsalmeida at gmail.com>
> ---
>  drivers/media/test-drivers/vidtv/vidtv_mux.c  | 34 +------------------
>  .../media/test-drivers/vidtv/vidtv_s302m.c    |  4 +--
>  2 files changed, 3 insertions(+), 35 deletions(-)
> 
> diff --git a/drivers/media/test-drivers/vidtv/vidtv_mux.c b/drivers/media/test-drivers/vidtv/vidtv_mux.c
> index 5d1a275d504b..6e402a880fdc 100644
> --- a/drivers/media/test-drivers/vidtv/vidtv_mux.c
> +++ b/drivers/media/test-drivers/vidtv/vidtv_mux.c
> @@ -336,38 +336,6 @@ static u32 vidtv_mux_pad_with_nulls(struct vidtv_mux *m, u32 npkts)
>  	return nbytes;
>  }
>  
> -static u32 vidtv_mux_check_mux_rate(struct vidtv_mux *m)
> -{
> -	/*
> -	 * attempt to maintain a constant mux rate, padding with null packets
> -	 * if needed
> -	 */
> -
> -	u32 nbytes = 0;  /* the number of bytes written by this function */
> -
> -	u64 nbytes_expected; /* the number of bytes we should have written */
> -	u64 nbytes_streamed; /* the number of bytes we actually wrote */
> -	u32 num_null_pkts; /* number of null packets to bridge the gap */
> -
> -	u64 elapsed_time_msecs = jiffies_to_usecs(m->timing.current_jiffies -
> -						  m->timing.past_jiffies);
> -
> -	elapsed_time_msecs = min(elapsed_time_msecs, (u64)VIDTV_MAX_SLEEP_USECS / 1000);
> -	nbytes_expected = div64_u64(m->mux_rate_kbytes_sec * 1000, MSEC_PER_SEC);
> -	nbytes_expected *= elapsed_time_msecs;
> -
> -	nbytes_streamed = m->mux_buf_offset;
> -
> -	if (nbytes_streamed < nbytes_expected) {
> -		/* can't write half a packet: roundup to a 188 multiple */
> -		nbytes_expected  = roundup(nbytes_expected - nbytes_streamed, TS_PACKET_LEN);
> -		num_null_pkts    = nbytes_expected / TS_PACKET_LEN;
> -		nbytes          += vidtv_mux_pad_with_nulls(m, num_null_pkts);
> -	}
> -
> -	return nbytes;
> -}
> -
>  static void vidtv_mux_clear(struct vidtv_mux *m)
>  {
>  	/* clear the packets currently in the mux */
> @@ -397,7 +365,7 @@ static void vidtv_mux_tick(struct work_struct *work)
>  			nbytes += vidtv_mux_push_si(m);
>  
>  		nbytes += vidtv_mux_poll_encoders(m);
> -		nbytes += vidtv_mux_check_mux_rate(m);
> +		nbytes += vidtv_mux_pad_with_nulls(m, 256);
>  
>  		npkts = nbytes / TS_PACKET_LEN;
>  
> diff --git a/drivers/media/test-drivers/vidtv/vidtv_s302m.c b/drivers/media/test-drivers/vidtv/vidtv_s302m.c
> index f8049cdf564a..e3290facf57b 100644
> --- a/drivers/media/test-drivers/vidtv/vidtv_s302m.c
> +++ b/drivers/media/test-drivers/vidtv/vidtv_s302m.c
> @@ -285,12 +285,12 @@ static void vidtv_s302m_compute_pts(struct vidtv_encoder *e)
>  {
>  	u64 count = e->sample_count;
>  	struct vidtv_access_unit *au = e->access_units;
> +	u32 duration = CLOCK_UNIT_90KHZ / e->sampling_rate_hz;
>  
>  	while (au) {
>  		count += au->num_samples;
>  
> -		au->pts = count *
> -			  CLOCK_UNIT_90KHZ / e->sampling_rate_hz;
> +		au->pts = count * duration;

That doesn't seem to be the right thing to do here. 

Assuming that sampling rate is 48 kHz, you'll
have duration = 1.875, which would be rounded to 1.

In other words, the above is identical to:

	au->pts = count

Now, I don't know from where that CLOCK_UNIT_90KHZ came from.

If such constant is not needed anymore, just drop it. 
	
If, on the other hand, this is required by the specs, then
you may need to do a 64 bits division, e. g. using
div64_u64() or do_div().

Thanks,
Mauro


More information about the Linux-kernel-mentees mailing list