[Lsb-messages] Build failure for tet-harness on x86_64
lsb-autobuild at freestandards.org
lsb-autobuild at freestandards.org
Wed Feb 27 09:03:22 PST 2008
This is an automated message generated when a build failure occurs
Linux lfdev-amd64 2.6.22-14-xen #1 SMP Sun Oct 14 23:20:20 GMT 2007 x86_64 x86_64 x86_64 GNU/Linux
Failed to make packages for tet-harness
rm -f /tet3.7-unsup.src.tgz /tet3-lite-manpages-v1.1.tgz /tet3.7-lite-lsb.patch /tet3.7-lite.patch tet3.7-unsup.src.tgz tet3-lite-manpages-v1.1.tgz support.tgz *.rpm *.deb
fetching http://www.opengroup.org/infosrv/TET/TET3//tet3.7-unsup.src.tgz ...
--17:22:48-- http://www.opengroup.org/infosrv/TET/TET3//tet3.7-unsup.src.tgz
=> `tet3.7-unsup.src.tgz'
Resolving www.opengroup.org... 192.153.166.92
Connecting to www.opengroup.org|192.153.166.92|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 953,406 (931K) [application/x-tar]
0K .......... .......... .......... .......... .......... 5% 8.59 KB/s
50K .......... .......... .......... .......... .......... 10% 37.86 KB/s
100K .......... .......... .......... .......... .......... 16% 49.70 KB/s
150K .......... .......... .......... .......... .......... 21% 60.33 KB/s
200K .......... .......... .......... .......... .......... 26% 91.12 KB/s
250K .......... .......... .......... .......... .......... 32% 101.35 KB/s
300K .......... .......... .......... .......... .......... 37% 108.51 KB/s
350K .......... .......... .......... .......... .......... 42% 83.87 KB/s
400K .......... .......... .......... .......... .......... 48% 103.18 KB/s
450K .......... .......... .......... .......... .......... 53% 130.77 KB/s
500K .......... .......... .......... .......... .......... 59% 142.35 KB/s
550K .......... .......... .......... .......... .......... 64% 94.85 KB/s
600K .......... .......... .......... .......... .......... 69% 128.10 KB/s
650K .......... .......... .......... .......... .......... 75% 120.78 KB/s
700K .......... .......... .......... .......... .......... 80% 104.60 KB/s
750K .......... .......... .......... .......... .......... 85% 58.88 KB/s
800K .......... .......... .......... .......... .......... 91% 120.93 KB/s
850K .......... .......... .......... .......... .......... 96% 88.16 KB/s
900K .......... .......... .......... . 100% 93.11 KB/s
17:23:05 (57.23 KB/s) - `tet3.7-unsup.src.tgz' saved [953406/953406]
fetching http://www.opengroup.org/infosrv/TET/TET3//tet3-lite-manpages-v1.1.tgz ...
--17:23:05-- http://www.opengroup.org/infosrv/TET/TET3//tet3-lite-manpages-v1.1.tgz
=> `tet3-lite-manpages-v1.1.tgz'
Resolving www.opengroup.org... 192.153.166.92
Connecting to www.opengroup.org|192.153.166.92|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 16,499 (16K) [application/x-tar]
0K .......... ...... 100% 22.97 KB/s
17:23:06 (22.97 KB/s) - `tet3-lite-manpages-v1.1.tgz' saved [16499/16499]
tar zcvf support.tgz support
support/
support/tjreport
support/tjreport.1
spawn rpmbuild --sign --rcfile /usr/lib/rpm/rpmrc:./rpmrc --define=_sourcedir /nethome/autobuild/tmp/LSBauto/tet-harness/package --define=_topdir /nethome/autobuild/tmp/rpm-build --define=_target_cpu x86_64 --define=_defaultdocdir /opt/lsb-tet3-lite/doc --define=LSBRelease 4 --define=rel 12 -ba lsb-tet3-lite.spec
Enter pass phrase:
Pass phrase is good.
Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.62779
+ umask 022
+ cd /nethome/autobuild/tmp/rpm-build/BUILD
+ '[' '!' -x /opt/lsb/bin/lsbcc ']'
+ '[' '!' -x /opt/lsb/bin/lsbc++ ']'
+ cd /nethome/autobuild/tmp/rpm-build/BUILD
+ rm -rf tet3-lite-3.7
+ /bin/mkdir -p tet3-lite-3.7
+ cd tet3-lite-3.7
+ /usr/bin/gzip -dc /nethome/autobuild/tmp/LSBauto/tet-harness/package/tet3.7-unsup.src.tgz
+ tar -xf -
+ STATUS=0
+ '[' 0 -ne 0 ']'
+ /usr/bin/gzip -dc /nethome/autobuild/tmp/LSBauto/tet-harness/package/tet3-lite-manpages-v1.1.tgz
+ tar -xf -
+ STATUS=0
+ '[' 0 -ne 0 ']'
+ echo 'Patch #0 (tet3.7-lite-lsb.patch):'
Patch #0 (tet3.7-lite-lsb.patch):
+ patch -p1 -s
+ '[' -n '' ']'
+ '[' -n '' ']'
+ exit 0
Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.41161
+ umask 022
+ cd /nethome/autobuild/tmp/rpm-build/BUILD
+ cd tet3-lite-3.7
+ unset PYTHONPATH
+ python
+ . ./.PYTHONINFO
++ PYTHONLIB=/usr/lib64/python2.4
++ PYTHONINCLUDE=/usr/include/python2.4
+ '[' '!' -d /usr/lib64/python2.4 ']'
+ '[' '!' -f /usr/include/python2.4/Python.h ']'
++ pwd
+ export TET_ROOT=/nethome/autobuild/tmp/rpm-build/BUILD/tet3-lite-3.7
+ TET_ROOT=/nethome/autobuild/tmp/rpm-build/BUILD/tet3-lite-3.7
+ sh ./configure -t lite
./configure: Linux detected.
If the JDK is installed on this machine, you have installed
the TETware Java API and you want to build the API,
you must edit src/defines.mk and specify where the
JDK include files have been installed on this machine.
The comments below the heading 'Support for Java' tell you
what to do.
./configure: using defines/linux.mk
TETware-Lite configuration completed
OS=x86_64-whatever-linux2 Configured
./configure: the selected defines.mk file has been designed to build
Distributed TETware to use the socket network interface.
If you are building a different version of TETware you may need
to edit the file src/defines.mk before building TETware.
For example: if network libraries have been specified in the
SYSLIBS assignment, you don't need these when building TETware-Lite.
To build TETware:
cd src; make; make install
+ cd src
+ make
make[1]: Entering directory `/nethome/autobuild/tmp/rpm-build/BUILD/tet3-lite-3.7/src'
tet3...
make[2]: Entering directory `/nethome/autobuild/tmp/rpm-build/BUILD/tet3-lite-3.7/src/tet3'
tcm:
make[3]: Entering directory `/nethome/autobuild/tmp/rpm-build/BUILD/tet3-lite-3.7/src/tet3/tcm'
+ test -n ''
touch dynlink_gen_made
/opt/lsb/bin/lsbcc -I../inc -I../../../inc/tet3 -D_POSIX_SOURCE -DTET_LITE -I. -O -fPIC -c dynlink.c
/opt/lsb/bin/lsbcc -I../inc -I../../../inc/tet3 -DINETD -DTET_LITE -I. -O -fPIC -c tcm_main.c
/opt/lsb/bin/lsbcc -I../inc -I../../../inc/tet3 -D_POSIX_SOURCE -DTET_LITE -I. -O -fPIC -c tcmfuncs.c
/opt/lsb/bin/lsbcc -I../inc -I../../../inc/tet3 -D_POSIX_SOURCE -DTET_LITE -I. -O -fPIC -c ictp.c
/opt/lsb/bin/lsbcc -I../inc -I../../../inc/tet3 -D_POSIX_SOURCE -DTET_LITE -I. -O -fPIC -c ckversion.c
/opt/lsb/bin/lsbcc -I../inc -I../../../inc/tet3 -D_POSIX_SOURCE -DTET_LITE -I. -O -fPIC -c main.c
ld -r -o tcm.o dynlink.o tcm_main.o tcmfuncs.o ictp.o ckversion.o main.o
/opt/lsb/bin/lsbcc -I../inc -I../../../inc/tet3 -D_POSIX_SOURCE -DTET_LITE -I. -O -fPIC -c tcmc_main.c
/opt/lsb/bin/lsbcc -I../inc -I../../../inc/tet3 -D_POSIX_SOURCE -DTET_LITE -I. -O -fPIC -c child.c
/opt/lsb/bin/lsbcc -I../inc -I../../../inc/tet3 -D_POSIX_SOURCE -DTET_LITE -I. -O -fPIC -c main_ch.c
ld -r -o tcmchild.o dynlink.o tcmc_main.o child.o tcmfuncs.o ckversion.o main_ch.o
ld -r -o tcm_m.o dynlink.o tcm_main.o tcmfuncs.o ictp.o ckversion.o
ld -r -o tcmc_m.o dynlink.o tcmc_main.o child.o tcmfuncs.o ckversion.o
make[3]: Leaving directory `/nethome/autobuild/tmp/rpm-build/BUILD/tet3-lite-3.7/src/tet3/tcm'
apilib:
make[3]: Entering directory `/nethome/autobuild/tmp/rpm-build/BUILD/tet3-lite-3.7/src/tet3/apilib'
/opt/lsb/bin/lsbcc -I. -I../inc -I../../../inc/tet3 -D_POSIX_SOURCE -DTET_LITE -O -fPIC -c libvers.c
/opt/lsb/bin/lsbcc -I../inc -I../../../inc/tet3 -D_POSIX_SOURCE -DTET_LITE -O -fPIC -c apichk.c
/opt/lsb/bin/lsbcc -I../inc -I../../../inc/tet3 -D_POSIX_SOURCE -DTET_LITE -O -fPIC -c dconfig.c
/opt/lsb/bin/lsbcc -I../inc -I../../../inc/tet3 -D_POSIX_SOURCE -DTET_LITE -O -fPIC -c dresfile.c
/opt/lsb/bin/lsbcc -I../inc -I../../../inc/tet3 -D_POSIX_SOURCE -DTET_LITE -O -fPIC -c dcancel.c
/opt/lsb/bin/lsbcc -I../inc -I../../../inc/tet3 -D_POSIX_SOURCE -DTET_LITE -O -fPIC -c errno.c
/opt/lsb/bin/lsbcc -I../inc -I../../../inc/tet3 -D_POSIX_SOURCE -DTET_LITE -O -fPIC -c errlist.c
/opt/lsb/bin/lsbcc -I../inc -I../../../inc/tet3 -D_POSIX_SOURCE -DTET_LITE -O -fPIC -c exit.c
/opt/lsb/bin/lsbcc -I../inc -I../../../inc/tet3 -D_POSIX_SOURCE -DTET_LITE -O -fPIC -c getlist.c
/opt/lsb/bin/lsbcc -I../inc -I../../../inc/tet3 -D_POSIX_SOURCE -DTET_LITE -O -fPIC -c getsys.c
/opt/lsb/bin/lsbcc -I../inc -I../../../inc/tet3 -D_POSIX_SOURCE -DTET_LITE -O -fPIC -c getsysid.c
/opt/lsb/bin/lsbcc -I../inc -I../../../inc/tet3 -D_POSIX_SOURCE -DTET_LITE -O -fPIC -c killw.c
/opt/lsb/bin/lsbcc -I../inc -I../../../inc/tet3 -D_POSIX_SOURCE -DTET_LITE -O -fPIC -c remtime.c
/opt/lsb/bin/lsbcc -I../inc -I../../../inc/tet3 -D_POSIX_SOURCE -DTET_LITE -O -fPIC -c signame.c
/opt/lsb/bin/lsbcc -I../inc -I../../../inc/tet3 -DINETD -DTET_LITE -O -fPIC -c sigreset.c
/opt/lsb/bin/lsbcc -I../inc -I../../../inc/tet3 -D_POSIX_SOURCE -DTET_LITE -O -fPIC -c sync.c
/opt/lsb/bin/lsbcc -I../inc -I../../../inc/tet3 -D_POSIX_SOURCE -DTET_LITE -O -fPIC -c tcmglob.c
/opt/lsb/bin/lsbcc -I../inc -I../../../inc/tet3 -D_POSIX_SOURCE -DTET_LITE -O -fPIC -c tdiscon.c
/opt/lsb/bin/lsbcc -I../inc -I../../../inc/tet3 -D_POSIX_SOURCE -DTET_LITE -O -fPIC -c tetchild.c
/opt/lsb/bin/lsbcc -I../inc -I../../../inc/tet3 -D_POSIX_SOURCE -DTET_LITE -O -fPIC -c tet_exec.c
/opt/lsb/bin/lsbcc -I../inc -I../../../inc/tet3 -D_POSIX_SOURCE -DTET_LITE -O -fPIC -c tet_fork.c
mv tet_fork.o tet_afork.o
if test -f tet_fork.sym; then mv tet_fork.sym tet_afork.sym; fi
/opt/lsb/bin/lsbcc -I../inc -I../../../inc/tet3 -D_POSIX_SOURCE -DTET_LITE -O -fPIC -c tet_spawn.c
/opt/lsb/bin/lsbcc -I../inc -I../../../inc/tet3 -D_POSIX_SOURCE -DTET_LITE -O -fPIC -c remexec.c
/opt/lsb/bin/lsbcc -I../inc -I../../../inc/tet3 -D_POSIX_SOURCE -DTET_LITE -O -fPIC -c remkill.c
/opt/lsb/bin/lsbcc -I../inc -I../../../inc/tet3 -D_POSIX_SOURCE -DTET_LITE -O -fPIC -c remwait.c
/opt/lsb/bin/lsbcc -I../inc -I../../../inc/tet3 -D_POSIX_SOURCE -DTET_LITE -O -fPIC -c rtab.c
/opt/lsb/bin/lsbcc -I../inc -I../../../inc/tet3 -D_POSIX_SOURCE -DTET_LITE -O -fPIC -c tciface.c
if test -f lib_made; then \
ar -rv ../../../lib/tet3/libapi.a libvers.o apichk.o dconfig.o dresfile.o dcancel.o errno.o errlist.o exit.o getlist.o getsys.o getsysid.o killw.o remtime.o signame.o sigreset.o sync.o tcmglob.o tdiscon.o tetchild.o tet_exec.o tet_afork.o tet_spawn.o remexec.o remkill.o remwait.o rtab.o tciface.o ;\
else \
ar -rv ../../../lib/tet3/libapi.a `echo libvers.o apichk.o dconfig.o dresfile.o dcancel.o errno.o errlist.o exit.o getlist.o getsys.o getsysid.o killw.o remtime.o signame.o sigreset.o sync.o tcmglob.o tdiscon.o tetchild.o tet_exec.o tet_afork.o tet_spawn.o remexec.o remkill.o remwait.o rtab.o tciface.o | cat` ;\
fi
ar: creating ../../../lib/tet3/libapi.a
a - libvers.o
a - apichk.o
a - dconfig.o
a - dresfile.o
a - dcancel.o
a - errno.o
a - errlist.o
a - exit.o
a - getlist.o
a - getsys.o
a - getsysid.o
a - killw.o
a - remtime.o
a - signame.o
a - sigreset.o
a - sync.o
a - tcmglob.o
a - tdiscon.o
a - tetchild.o
a - tet_exec.o
a - tet_afork.o
a - tet_spawn.o
a - remexec.o
a - remkill.o
a - remwait.o
a - rtab.o
a - tciface.o
touch lib_made
make[3]: Leaving directory `/nethome/autobuild/tmp/rpm-build/BUILD/tet3-lite-3.7/src/tet3/apilib'
dtet2lib:
make[3]: Entering directory `/nethome/autobuild/tmp/rpm-build/BUILD/tet3-lite-3.7/src/tet3/dtet2lib'
/opt/lsb/bin/lsbcc -I../inc -I../../../inc/tet3 -D_POSIX_SOURCE -DTET_LITE -O -fPIC -c addarg.c
/opt/lsb/bin/lsbcc -I../inc -I../../../inc/tet3 -D_POSIX_SOURCE -DTET_LITE -O -fPIC -c alarm.c
/opt/lsb/bin/lsbcc -I../inc -I../../../inc/tet3 -D_POSIX_SOURCE -DTET_LITE -O -fPIC -c amsg.c
/opt/lsb/bin/lsbcc -I../inc -I../../../inc/tet3 -D_POSIX_SOURCE -DTET_LITE -O -fPIC -c avmsg.c
/opt/lsb/bin/lsbcc -I../inc -I../../../inc/tet3 -D_POSIX_SOURCE -DTET_LITE -O -fPIC -c basename.c
/opt/lsb/bin/lsbcc -I../inc -I../../../inc/tet3 -D_POSIX_SOURCE -DTET_LITE -O -fPIC -c btmsg.c
/opt/lsb/bin/lsbcc -I../inc -I../../../inc/tet3 -D_POSIX_SOURCE -DTET_LITE -O -fPIC -c bufchk.c
/opt/lsb/bin/lsbcc -I../inc -I../../../inc/tet3 -D_POSIX_SOURCE -DTET_LITE -O -fPIC -c buftrace.c
/opt/lsb/bin/lsbcc -I../inc -I../../../inc/tet3 -D_POSIX_SOURCE -DTET_LITE -O -fPIC -c dtmsg.c
/opt/lsb/bin/lsbcc -I../inc -I../../../inc/tet3 -D_POSIX_SOURCE -DTET_LITE -O -fPIC -c dtsize.c
/opt/lsb/bin/lsbcc -I../inc -I../../../inc/tet3 -D_POSIX_SOURCE -DTET_LITE -O -fPIC -c eaccess.c
/opt/lsb/bin/lsbcc -I../inc -I../../../inc/tet3 -D_POSIX_SOURCE -DTET_LITE -O -fPIC -c equindex.c
/opt/lsb/bin/lsbcc -I../inc -I../../../inc/tet3 -DINETD -DTET_LITE -O -fPIC -c errmap.c
/opt/lsb/bin/lsbcc -I../inc -I../../../inc/tet3 -D_POSIX_SOURCE -DTET_LITE -O -fPIC -c errname.c
/opt/lsb/bin/lsbcc -I../inc -I../../../inc/tet3 -D_POSIX_SOURCE -DTET_LITE -O -fPIC -c fappend.c
/opt/lsb/bin/lsbcc -I../inc -I../../../inc/tet3 -D_POSIX_SOURCE -DTET_LITE -O -fPIC -c fcopy.c
/opt/lsb/bin/lsbcc -I../inc -I../../../inc/tet3 -D_POSIX_SOURCE -DTET_LITE -O -fPIC -c fgetargs.c
/opt/lsb/bin/lsbcc -I../inc -I../../../inc/tet3 -D_POSIX_SOURCE -DTET_LITE -O -fPIC -c fioclex.c
/opt/lsb/bin/lsbcc -I../inc -I../../../inc/tet3 -D_POSIX_SOURCE -DTET_LITE -O -fPIC -c fork.c
/opt/lsb/bin/lsbcc -I../inc -I../../../inc/tet3 -D_POSIX_SOURCE -DTET_LITE -O -fPIC -c ftoa.c
/opt/lsb/bin/lsbcc -I../inc -I../../../inc/tet3 -D_POSIX_SOURCE -DTET_LITE -O -fPIC -c ftype.c
/opt/lsb/bin/lsbcc -I../inc -I../../../inc/tet3 -D_POSIX_SOURCE -DTET_LITE -O -fPIC -c generror.c
/opt/lsb/bin/lsbcc -I../inc -I../../../inc/tet3 -D_POSIX_SOURCE -DTET_LITE -O -fPIC -c genfatal.c
/opt/lsb/bin/lsbcc -I../inc -I../../../inc/tet3 -D_POSIX_SOURCE -DTET_LITE -O -fPIC -c getargs.c
/opt/lsb/bin/lsbcc -I../inc -I../../../inc/tet3 -D_POSIX_SOURCE -DTET_LITE -O -fPIC -c getcwd.c
/opt/lsb/bin/lsbcc -I../inc -I../../../inc/tet3 -D_POSIX_SOURCE -DTET_LITE -O -fPIC -c getopt.c
/opt/lsb/bin/lsbcc -I../inc -I../../../inc/tet3 -D_POSIX_SOURCE -DTET_LITE -O -fPIC -c globals.c
/opt/lsb/bin/lsbcc -I../inc -I../../../inc/tet3 -D_POSIX_SOURCE -DTET_LITE -O -fPIC -c hexdump.c
/opt/lsb/bin/lsbcc -I../inc -I../../../inc/tet3 -D_POSIX_SOURCE -DTET_LITE -O -fPIC -c iswin.c
/opt/lsb/bin/lsbcc -I../inc -I../../../inc/tet3 -D_POSIX_SOURCE -DTET_LITE -O -fPIC -c ldst.c
/opt/lsb/bin/lsbcc -I../inc -I../../../inc/tet3 -D_POSIX_SOURCE -DTET_LITE -O -fPIC -c llist.c
/opt/lsb/bin/lsbcc -I../inc -I../../../inc/tet3 -D_POSIX_SOURCE -DTET_LITE -O -fPIC -c lsdir.c
/opt/lsb/bin/lsbcc -I../inc -I../../../inc/tet3 -D_POSIX_SOURCE -DTET_LITE -O -fPIC -c ltoa.c
/opt/lsb/bin/lsbcc -I../inc -I../../../inc/tet3 -D_POSIX_SOURCE -DTET_LITE -O -fPIC -c ltoo.c
/opt/lsb/bin/lsbcc -I../inc -I../../../inc/tet3 -D_POSIX_SOURCE -DTET_LITE -O -fPIC -c ltox.c
/opt/lsb/bin/lsbcc -I../inc -I../../../inc/tet3 -D_POSIX_SOURCE -DTET_LITE -O -fPIC -c madir.c
/opt/lsb/bin/lsbcc -I../inc -I../../../inc/tet3 -D_POSIX_SOURCE -DTET_LITE -O -fPIC -c maperr.c
/opt/lsb/bin/lsbcc -I../inc -I../../../inc/tet3 -D_POSIX_SOURCE -DTET_LITE -O -fPIC -c mapsig.c
/opt/lsb/bin/lsbcc -I../inc -I../../../inc/tet3 -D_POSIX_SOURCE -DTET_LITE -O -fPIC -c mapstat.c
/opt/lsb/bin/lsbcc -I../inc -I../../../inc/tet3 -D_POSIX_SOURCE -DTET_LITE -O -fPIC -c mkdir.c
/opt/lsb/bin/lsbcc -I../inc -I../../../inc/tet3 -D_POSIX_SOURCE -DTET_LITE -O -fPIC -c notty.c
/opt/lsb/bin/lsbcc -I../inc -I../../../inc/tet3 -D_POSIX_SOURCE -DTET_LITE -O -fPIC -c optarg.c
/opt/lsb/bin/lsbcc -I../inc -I../../../inc/tet3 -D_POSIX_SOURCE -DTET_LITE -O -fPIC -c pmatch.c
/opt/lsb/bin/lsbcc -I../inc -I../../../inc/tet3 -D_POSIX_SOURCE -DTET_LITE -O -fPIC -c prerror.c
/opt/lsb/bin/lsbcc -I../inc -I../../../inc/tet3 -D_POSIX_SOURCE -DTET_LITE -O -fPIC -c ptflags.c
/opt/lsb/bin/lsbcc -I../inc -I../../../inc/tet3 -D_POSIX_SOURCE -DTET_LITE -O -fPIC -c ptspid.c
/opt/lsb/bin/lsbcc -I../inc -I../../../inc/tet3 -D_POSIX_SOURCE -DTET_LITE -O -fPIC -c ptstate.c
/opt/lsb/bin/lsbcc -I../inc -I../../../inc/tet3 -D_POSIX_SOURCE -DTET_LITE -O -fPIC -c ptstype.c
/opt/lsb/bin/lsbcc -I../inc -I../../../inc/tet3 -D_POSIX_SOURCE -DTET_LITE -O -fPIC -c pttype.c
/opt/lsb/bin/lsbcc -I../inc -I../../../inc/tet3 -D_POSIX_SOURCE -DTET_LITE -O -fPIC -c ptype.c
/opt/lsb/bin/lsbcc -I../inc -I../../../inc/tet3 -D_POSIX_SOURCE -DTET_LITE -O -fPIC -c putenv.c
make[3]: *** No rule to make target `remvar.c', needed by `remvar.o'. Stop.
make[3]: Leaving directory `/nethome/autobuild/tmp/rpm-build/BUILD/tet3-lite-3.7/src/tet3/dtet2lib'
tcclib:
make: getcwd: : No such file or directory
make[3]: Entering directory `'
make[3]: *** No rule to make target `all'. Stop.
make[3]: Leaving directory `'
tcc:
/bin/sh: line 0: cd: tcc: No such file or directory
tcmthr:
/bin/sh: line 0: cd: tcmthr: No such file or directory
apithr:
/bin/sh: line 0: cd: apithr: No such file or directory
apishlib:
/bin/sh: line 0: cd: apishlib: No such file or directory
tcmshlib:
/bin/sh: line 0: cd: tcmshlib: No such file or directory
apithrshlib:
/bin/sh: line 0: cd: apithrshlib: No such file or directory
tcmthrshlib:
/bin/sh: line 0: cd: tcmthrshlib: No such file or directory
tcm(C++):
/bin/sh: line 0: cd: tcm: No such file or directory
tcmthr(C++):
/bin/sh: line 0: cd: tcmthr: No such file or directory
tcmshlib(C++):
/bin/sh: line 0: cd: tcmshlib: No such file or directory
tcmthrshlib(C++):
/bin/sh: line 0: cd: tcmthrshlib: No such file or directory
make[2]: Leaving directory `/nethome/autobuild/tmp/rpm-build/BUILD/tet3-lite-3.7/src/tet3'
xpg3sh/api...
/bin/sh: line 0: cd: xpg3sh/api: No such file or directory
ksh/api...
/bin/sh: line 0: cd: ksh/api: No such file or directory
posix_sh/api...
/bin/sh: line 0: cd: posix_sh/api: No such file or directory
scripts...
/bin/sh: line 0: cd: scripts: No such file or directory
perl...
/bin/sh: line 0: cd: perl: No such file or directory
make[1]: Leaving directory `/nethome/autobuild/tmp/rpm-build/BUILD/tet3-lite-3.7/src'
+ make install
make: getcwd: : No such file or directory
make[1]: Entering directory `'
make[1]: *** No rule to make target `install'. Stop.
make[1]: Leaving directory `'
error: Bad exit status from /var/tmp/rpm-tmp.41161 (%build)
RPM build errors:
Bad exit status from /var/tmp/rpm-tmp.41161 (%build)
expect: spawn id exp3 not open
while executing
"expect "exit 0""
send: spawn id exp3 not open
while executing
"send "\n""
mv: cannot stat `/nethome/autobuild/tmp/rpm-build/SRPMS/lsb-tet3-lite-3.7-12.lsb4.src.rpm': No such file or directory
make: *** [lsb-tet3-lite-3.7-12.lsb4.src.rpm] Error 1
More information about the lsb-messages
mailing list